freebsd-dev/usr.sbin/mfiutil/mfiutil.c
Bjoern A. Zeeb 7bbae305a1 Add global -d and -e options to either print device numbers
(usually default) or enclosure:slot information as (Exx:Sxx)
or both.

Discussed with:		jhb
Reviewed by:		jhb
Sponsored by:		Sandvine Incorporated
MFC after:		1 week
2011-06-20 21:28:50 +00:00

147 lines
5.2 KiB
C

/*-
* Copyright (c) 2008, 2009 Yahoo!, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The names of the authors may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/errno.h>
#include <err.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include "mfiutil.h"
SET_DECLARE(MFI_DATASET(top), struct mfiutil_command);
MFI_TABLE(top, start);
MFI_TABLE(top, stop);
MFI_TABLE(top, abort);
int mfi_unit;
u_int mfi_opts;
static void
usage(void)
{
fprintf(stderr, "usage: mfiutil [-de] [-u unit] <command> ...\n\n");
fprintf(stderr, "Commands include:\n");
fprintf(stderr, " version\n");
fprintf(stderr, " show adapter - display controller information\n");
fprintf(stderr, " show battery - display battery information\n");
fprintf(stderr, " show config - display RAID configuration\n");
fprintf(stderr, " show drives - list physical drives\n");
fprintf(stderr, " show events - display event log\n");
fprintf(stderr, " show firmware - list firmware images\n");
fprintf(stderr, " show logstate - display event log sequence numbers\n");
fprintf(stderr, " show volumes - list logical volumes\n");
fprintf(stderr, " show patrol - display patrol read status\n");
fprintf(stderr, " show progress - display status of active operations\n");
fprintf(stderr, " fail <drive> - fail a physical drive\n");
fprintf(stderr, " good <drive> - mark a bad physical drive as good\n");
fprintf(stderr, " rebuild <drive> - mark failed drive ready for rebuild\n");
fprintf(stderr, " drive progress <drive> - display status of active operations\n");
fprintf(stderr, " drive clear <drive> <start|stop> - clear a drive with all 0x00\n");
fprintf(stderr, " start rebuild <drive>\n");
fprintf(stderr, " abort rebuild <drive>\n");
fprintf(stderr, " locate <drive> <on|off> - toggle drive LED\n");
fprintf(stderr, " cache <volume> [command [setting]]\n");
fprintf(stderr, " name <volume> <name>\n");
fprintf(stderr, " volume progress <volume> - display status of active operations\n");
fprintf(stderr, " clear - clear volume configuration\n");
fprintf(stderr, " create <type> [-v] <drive>[,<drive>[,...]] [<drive>[,<drive>[,...]]\n");
fprintf(stderr, " delete <volume>\n");
fprintf(stderr, " add <drive> [volume] - add a hot spare\n");
fprintf(stderr, " remove <drive> - remove a hot spare\n");
fprintf(stderr, " patrol <disable|auto|manual> [interval [start]]\n");
fprintf(stderr, " start patrol - start a patrol read\n");
fprintf(stderr, " stop patrol - stop a patrol read\n");
fprintf(stderr, " flash <firmware>\n");
#ifdef DEBUG
fprintf(stderr, " debug - debug 'show config'\n");
fprintf(stderr, " dump - display 'saved' config\n");
#endif
exit(1);
}
static int
version(int ac, char **av)
{
printf("mfiutil version 1.0.13");
#ifdef DEBUG
printf(" (DEBUG)");
#endif
printf("\n");
return (0);
}
MFI_COMMAND(top, version, version);
int
main(int ac, char **av)
{
struct mfiutil_command **cmd;
int ch;
while ((ch = getopt(ac, av, "deu:")) != -1) {
switch (ch) {
case 'd':
mfi_opts |= MFI_DNAME_DEVICE_ID;
break;
case 'e':
mfi_opts |= MFI_DNAME_ES;
break;
case 'u':
mfi_unit = atoi(optarg);
break;
case '?':
usage();
}
}
av += optind;
ac -= optind;
/* getopt() eats av[0], so we can't use mfi_table_handler() directly. */
if (ac == 0)
usage();
SET_FOREACH(cmd, MFI_DATASET(top)) {
if (strcmp((*cmd)->name, av[0]) == 0) {
if ((*cmd)->handler(ac, av))
return (1);
else
return (0);
}
}
warnx("Unknown command %s.", av[0]);
return (1);
}