freebsd-dev/sys/dev/dpt/dpt_pci.c

188 lines
5.2 KiB
C

/*
* Copyright (c) 1997 by Simon Shapiro
* All Rights Reserved
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* dptpci.c: PCI Bus Attachment for DPT SCSI HBAs
*/
#ident "$Id: dpt_pci.c,v 1.10 1998/12/07 21:58:46 archie Exp $"
#include "opt_devfs.h"
#include "opt_dpt.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#include <sys/kernel.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <machine/bus_memio.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <cam/scsi/scsi_all.h>
#include <dev/dpt/dpt.h>
#include <pci/dpt_pci.h>
#define PCI_BASEADR0 PCI_MAP_REG_START /* I/O Address */
#define PCI_BASEADR1 PCI_MAP_REG_START + 4 /* Mem I/O Address */
#define ISA_PRIMARY_WD_ADDRESS 0x1f8
/* Global variables */
/* Function Prototypes */
static const char *dpt_pci_probe(pcici_t tag, pcidi_t type);
static void dpt_pci_attach(pcici_t config_id, int unit);
extern struct cdevsw dpt_cdevsw;
static struct pci_device dpt_pci_driver =
{
"dpt",
dpt_pci_probe,
dpt_pci_attach,
&dpt_unit,
NULL
};
DATA_SET(pcidevice_set, dpt_pci_driver);
/*
* Probe the PCI device.
* Some of this work will have to be duplicated in _attach
* because we do not know for sure how the two relate.
*/
static const char *
dpt_pci_probe(pcici_t tag, pcidi_t type)
{
u_int32_t class;
#ifndef PCI_COMMAND_MASTER_ENABLE
#define PCI_COMMAND_MASTER_ENABLE 0x00000004
#endif
#ifndef PCI_SUBCLASS_MASS_STORAGE_SCSI
#define PCI_SUBCLASS_MASS_STORAGE_SCSI 0x00000000
#endif
class = pci_conf_read(tag, PCI_CLASS_REG);
if (((type & 0xffff0000) >> 16) == DPT_DEVICE_ID
&& (class & PCI_CLASS_MASK) == PCI_CLASS_MASS_STORAGE
&& (class & PCI_SUBCLASS_MASK) == PCI_SUBCLASS_MASS_STORAGE_SCSI)
return ("DPT Caching SCSI RAID Controller");
return (NULL);
}
static void
dpt_pci_attach(pcici_t config_id, int unit)
{
dpt_softc_t *dpt;
vm_offset_t vaddr;
#ifdef DPT_ALLOW_MEMIO
vm_offset_t paddr;
#endif
u_int16_t io_base;
bus_space_tag_t tag;
bus_space_handle_t bsh;
u_int32_t command;
int s;
vaddr = NULL;
command = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG);
#ifdef DPT_ALLOW_MEMIO
if ((command & PCI_COMMAND_MEM_ENABLE) == 0
|| (pci_map_mem(config_id, PCI_BASEADR1, &vaddr, &paddr)) == 0)
#endif
if ((command & PCI_COMMAND_IO_ENABLE) == 0
|| (pci_map_port(config_id, PCI_BASEADR0, &io_base)) == 0)
return;
/*
* If the DPT is mapped as an IDE controller,
* let it be IDE controller
*/
if (io_base == ISA_PRIMARY_WD_ADDRESS - 0x10) {
#ifdef DPT_DEBUG_WARN
printf("dpt%d: Mapped as an IDE controller. "
"Disabling SCSI setup\n", unit);
#endif
return;
}
/* XXX Should be passed in by parent bus */
/* XXX Why isn't the 0x10 offset incorporated into the reg defs? */
if (vaddr != 0) {
tag = I386_BUS_SPACE_MEM;
bsh = vaddr + 0x10;
} else {
tag = I386_BUS_SPACE_IO;
bsh = io_base + 0x10;
}
if ((dpt = dpt_alloc(unit, tag, bsh)) == NULL)
return; /* XXX PCI code should take return status */
/* Allocate a dmatag representing the capabilities of this attachment */
/* XXX Should be a child of the PCI bus dma tag */
if (bus_dma_tag_create(/*parent*/NULL, /*alignemnt*/0, /*boundary*/0,
/*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
/*nsegments*/BUS_SPACE_UNRESTRICTED,
/*maxsegsz*/BUS_SPACE_MAXSIZE_32BIT,
/*flags*/0, &dpt->parent_dmat) != 0) {
dpt_free(dpt);
return;
}
if (pci_map_int(config_id, dpt_intr, (void *)dpt, &cam_imask) == 0) {
dpt_free(dpt);
return;
}
s = splcam();
if (dpt_init(dpt) != 0) {
dpt_free(dpt);
return;
}
/* Register with the XPT */
dpt_attach(dpt);
splx(s);
}