96807c23ce
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire v2.12.0.3 for Linux" release. Changes since 1.14.4.0 (which is the firmware in -STABLE branches) are in the "Release Notes" accompanying the Unified Wire release and are copy-pasted here as well. 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.15.37.0 Date : 04/27/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress queue was ignored. - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Fixed 40G link failures with some switches when auto-negotiation enabled. - Fixed to improve on link bring-up time. - Per port buffer groups size doubled to improve performance. - Fixed an issue where bogus d3hot bits were set causing traffic stall. - Fixed an issue where sometimes adapter was not seen after reboot. - Fixed an issue where iWARP was crashing in conjunction with traffic management. - Fixed an issue where link failed to come up after removing twinax cable and inserting optical module. ETH - Fixed a link flap issue on T580-CR. OFLD - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag. FOiSCSI - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to use given inerface. - Fixed an issue where fw was sending ENETUNREACH event for normal tcp disconnection. DCBX - Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE) - Fixed an issue where apply bit set for APP id was affecting the ETS and PFC settings.(DCBX IEEE) - Fixed an issue where app priority values are not handled correctly in fw. (DCBX IEEE) - Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE) FOFCoE - Removed BB6 support. ENHANCEMENTS ------------ BASE: - Added new interface to program DCA settings in SGE contexts; allow 32-byte IQE size - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment. - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. OFLD: - WR opcode is returned to host in cqe error response. 22.2. T4 Firmware +++++++++++++++++ Version : 1.15.37.0 Date : 04/27/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue was ignored. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Per port buffer groups size doubled to improve performance. - Fixed an issue where iWARP was crashing in conjunction with traffic management. FOiSCSI: - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to use given inerface. DCBX - Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE) - Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE) FOiSCSI - Fixes an issue where fw was sending ENETUNREACH event for normal tcp disconnection. FOFCoE - Removed BB6 support. ENHANCEMENTS ------------ BASE: - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. ================================================================================ Obtained from: Chelsio Communications MFC after: 6 weeks Relnotes: yes Sponsored by: Chelsio Communications |
||
|---|---|---|
| .. | ||
| cxgbei | ||
| if_cxgbe | ||
| if_cxl | ||
| iw_cxgbe | ||
| t4_firmware | ||
| t5_firmware | ||
| tom | ||
| Makefile | ||