freebsd-dev/sys/gnu/dts/mips/NA930.dts
Stanislav Galabov 179f14534e Import LEDE dts files for Ralink/Mediatek
This is an import of the reworked LEDE dts files. Besides other things
they make it easier for us to reuse.

The only diffs left are for the following SoCs:
MT7620A (fbsd-mt7620a.dtsi)
MT7621 (fbsd-mt7621.dtsi)
MT7628 (fbsd-mt7628an.dtsi)
RT3883 (fbsd-rt3883.dtsi)

So we include the fbsd-*.dtsi files at the end of the original LEDE dtsi
files, using '#include "fbsd-xxxx.dtsi"'.
For example, for MT7621, the LEDE dtsi file is mt7621.dtsi. At the end of
it we add:
#include "fbsd-mt7621.dtsi"

Approved by:	adrian (mentor)
Obtained from:	LEDE project
Sponsored by:	Smartcom - Bulgaria AD
Differential Revision:	https://reviews.freebsd.org/D6394
2016-05-17 06:42:24 +00:00

173 lines
2.3 KiB
Plaintext

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Sercomm NA930";
chosen {
bootargs = "console=ttyS1,57600";
};
nand {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mtk,mt7620-nand";
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@200000 {
label = "factory";
reg = <0x200000 0x40000>;
read-only;
};
partition@240000 {
label = "Config";
reg = <0x240000 0x400000>;
read-only;
};
partition@640000 {
label = "firmware";
reg = <0x640000 0x1400000>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 11 1>;
linux,code = <0x198>;
};
zwave {
label = "zwave";
gpios = <&gpio0 12 1>;
linux,code = <0x100>;
};
wps {
label = "wps";
gpios = <&gpio0 14 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
zwave {
label = "na930:blue:zwave";
gpios = <&gpio2 0 1>;
};
status {
label = "na930:blue:status";
gpios = <&gpio2 26 1>;
};
service {
label = "na930:blue:service";
gpios = <&gpio2 28 1>;
};
power {
label = "na930:blue:power";
gpios = <&gpio2 29 1>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
telit {
gpio-export,name = "telit";
gpio-export,output = <1>;
gpios = <&gpio0 13 0>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "rgmii2", "spi", "ephy";
ralink,function = "gpio";
};
uartf_gpio {
ralink,group = "uartf";
ralink,function = "gpio uartf";
};
};
};
&uart {
status = "okay";
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&ethernet {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &mdio_pins>;
mediatek,portmap = "llllw";
port@4 {
status = "okay";
phy-handle = <&phy4>;
phy-mode = "rgmii";
};
port@5 {
status = "okay";
phy-handle = <&phy5>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy5: ethernet-phy@5 {
reg = <5>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4 = "gmac";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};