Warner Losh 7f2af527b0 When the driver allocates memory or I/O ports, enable that bit in the ... command config register. At the present, this represents a nop because these bits should have been set earlier in the process. In the future, we'll only set these bits when the driver requests the resource, not when the bus code detects the resource. Reviewed by: mdodd		2003-04-15 19:38:18 +00:00
..
eisa_pci.c
fixup_pci.c	Fix reversed arguments to pci_write_config()	2001-06-03 09:45:40 +00:00
ignore_pci.c
isa_pci.c	Save and restore the interrupt Edge/Level Control Registers (ELCR)	2002-10-30 19:55:06 +00:00
pci_if.m	Slightly reimplement some recently added helper functions as methods, so	2001-02-27 23:13:20 +00:00
pci_pci.c	Make the base pcib_route_interrupt method available to other pci-pci bridge	2003-01-14 11:37:56 +00:00
pci_private.h	Move the pnp and location info into the common pci bus. Make all known	2003-02-17 21:20:35 +00:00
pci_user.c	Gigacommit to improve device-driver source compatibility between	2003-03-03 12:15:54 +00:00
pci.c	When the driver allocates memory or I/O ports, enable that bit in the	2003-04-15 19:38:18 +00:00
pcib_if.m
pcib_private.h	Make the base pcib_route_interrupt method available to other pci-pci bridge	2003-01-14 11:37:56 +00:00
pcireg.h	Add some PCI-X register definitions.	2002-06-05 22:25:51 +00:00
pcivar.h	Add a new cardbus specific ivar: PCI_IVAR_ETHADDR. Some pci-like	2002-11-27 06:41:28 +00:00