76039bc84f
to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2932 lines
79 KiB
C
2932 lines
79 KiB
C
/*-
|
|
* Copyright (c) 2004
|
|
* Bill Paul <wpaul@windriver.com>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* VIA Networking Technologies VT612x PCI gigabit ethernet NIC driver.
|
|
*
|
|
* Written by Bill Paul <wpaul@windriver.com>
|
|
* Senior Networking Software Engineer
|
|
* Wind River Systems
|
|
*/
|
|
|
|
/*
|
|
* The VIA Networking VT6122 is a 32bit, 33/66Mhz PCI device that
|
|
* combines a tri-speed ethernet MAC and PHY, with the following
|
|
* features:
|
|
*
|
|
* o Jumbo frame support up to 16K
|
|
* o Transmit and receive flow control
|
|
* o IPv4 checksum offload
|
|
* o VLAN tag insertion and stripping
|
|
* o TCP large send
|
|
* o 64-bit multicast hash table filter
|
|
* o 64 entry CAM filter
|
|
* o 16K RX FIFO and 48K TX FIFO memory
|
|
* o Interrupt moderation
|
|
*
|
|
* The VT6122 supports up to four transmit DMA queues. The descriptors
|
|
* in the transmit ring can address up to 7 data fragments; frames which
|
|
* span more than 7 data buffers must be coalesced, but in general the
|
|
* BSD TCP/IP stack rarely generates frames more than 2 or 3 fragments
|
|
* long. The receive descriptors address only a single buffer.
|
|
*
|
|
* There are two peculiar design issues with the VT6122. One is that
|
|
* receive data buffers must be aligned on a 32-bit boundary. This is
|
|
* not a problem where the VT6122 is used as a LOM device in x86-based
|
|
* systems, but on architectures that generate unaligned access traps, we
|
|
* have to do some copying.
|
|
*
|
|
* The other issue has to do with the way 64-bit addresses are handled.
|
|
* The DMA descriptors only allow you to specify 48 bits of addressing
|
|
* information. The remaining 16 bits are specified using one of the
|
|
* I/O registers. If you only have a 32-bit system, then this isn't
|
|
* an issue, but if you have a 64-bit system and more than 4GB of
|
|
* memory, you must have to make sure your network data buffers reside
|
|
* in the same 48-bit 'segment.'
|
|
*
|
|
* Special thanks to Ryan Fu at VIA Networking for providing documentation
|
|
* and sample NICs for testing.
|
|
*/
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_media.h>
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
MODULE_DEPEND(vge, pci, 1, 1, 1);
|
|
MODULE_DEPEND(vge, ether, 1, 1, 1);
|
|
MODULE_DEPEND(vge, miibus, 1, 1, 1);
|
|
|
|
/* "device miibus" required. See GENERIC if you get errors here. */
|
|
#include "miibus_if.h"
|
|
|
|
#include <dev/vge/if_vgereg.h>
|
|
#include <dev/vge/if_vgevar.h>
|
|
|
|
#define VGE_CSUM_FEATURES (CSUM_IP | CSUM_TCP | CSUM_UDP)
|
|
|
|
/* Tunables */
|
|
static int msi_disable = 0;
|
|
TUNABLE_INT("hw.vge.msi_disable", &msi_disable);
|
|
|
|
/*
|
|
* The SQE error counter of MIB seems to report bogus value.
|
|
* Vendor's workaround does not seem to work on PCIe based
|
|
* controllers. Disable it until we find better workaround.
|
|
*/
|
|
#undef VGE_ENABLE_SQEERR
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct vge_type vge_devs[] = {
|
|
{ VIA_VENDORID, VIA_DEVICEID_61XX,
|
|
"VIA Networking Velocity Gigabit Ethernet" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static int vge_attach(device_t);
|
|
static int vge_detach(device_t);
|
|
static int vge_probe(device_t);
|
|
static int vge_resume(device_t);
|
|
static int vge_shutdown(device_t);
|
|
static int vge_suspend(device_t);
|
|
|
|
static void vge_cam_clear(struct vge_softc *);
|
|
static int vge_cam_set(struct vge_softc *, uint8_t *);
|
|
static void vge_clrwol(struct vge_softc *);
|
|
static void vge_discard_rxbuf(struct vge_softc *, int);
|
|
static int vge_dma_alloc(struct vge_softc *);
|
|
static void vge_dma_free(struct vge_softc *);
|
|
static void vge_dmamap_cb(void *, bus_dma_segment_t *, int, int);
|
|
#ifdef VGE_EEPROM
|
|
static void vge_eeprom_getword(struct vge_softc *, int, uint16_t *);
|
|
#endif
|
|
static int vge_encap(struct vge_softc *, struct mbuf **);
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
static __inline void
|
|
vge_fixup_rx(struct mbuf *);
|
|
#endif
|
|
static void vge_freebufs(struct vge_softc *);
|
|
static void vge_ifmedia_sts(struct ifnet *, struct ifmediareq *);
|
|
static int vge_ifmedia_upd(struct ifnet *);
|
|
static int vge_ifmedia_upd_locked(struct vge_softc *);
|
|
static void vge_init(void *);
|
|
static void vge_init_locked(struct vge_softc *);
|
|
static void vge_intr(void *);
|
|
static void vge_intr_holdoff(struct vge_softc *);
|
|
static int vge_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void vge_link_statchg(void *);
|
|
static int vge_miibus_readreg(device_t, int, int);
|
|
static int vge_miibus_writereg(device_t, int, int, int);
|
|
static void vge_miipoll_start(struct vge_softc *);
|
|
static void vge_miipoll_stop(struct vge_softc *);
|
|
static int vge_newbuf(struct vge_softc *, int);
|
|
static void vge_read_eeprom(struct vge_softc *, caddr_t, int, int, int);
|
|
static void vge_reset(struct vge_softc *);
|
|
static int vge_rx_list_init(struct vge_softc *);
|
|
static int vge_rxeof(struct vge_softc *, int);
|
|
static void vge_rxfilter(struct vge_softc *);
|
|
static void vge_setmedia(struct vge_softc *);
|
|
static void vge_setvlan(struct vge_softc *);
|
|
static void vge_setwol(struct vge_softc *);
|
|
static void vge_start(struct ifnet *);
|
|
static void vge_start_locked(struct ifnet *);
|
|
static void vge_stats_clear(struct vge_softc *);
|
|
static void vge_stats_update(struct vge_softc *);
|
|
static void vge_stop(struct vge_softc *);
|
|
static void vge_sysctl_node(struct vge_softc *);
|
|
static int vge_tx_list_init(struct vge_softc *);
|
|
static void vge_txeof(struct vge_softc *);
|
|
static void vge_watchdog(void *);
|
|
|
|
static device_method_t vge_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, vge_probe),
|
|
DEVMETHOD(device_attach, vge_attach),
|
|
DEVMETHOD(device_detach, vge_detach),
|
|
DEVMETHOD(device_suspend, vge_suspend),
|
|
DEVMETHOD(device_resume, vge_resume),
|
|
DEVMETHOD(device_shutdown, vge_shutdown),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, vge_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, vge_miibus_writereg),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t vge_driver = {
|
|
"vge",
|
|
vge_methods,
|
|
sizeof(struct vge_softc)
|
|
};
|
|
|
|
static devclass_t vge_devclass;
|
|
|
|
DRIVER_MODULE(vge, pci, vge_driver, vge_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, vge, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
#ifdef VGE_EEPROM
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void
|
|
vge_eeprom_getword(struct vge_softc *sc, int addr, uint16_t *dest)
|
|
{
|
|
int i;
|
|
uint16_t word = 0;
|
|
|
|
/*
|
|
* Enter EEPROM embedded programming mode. In order to
|
|
* access the EEPROM at all, we first have to set the
|
|
* EELOAD bit in the CHIPCFG2 register.
|
|
*/
|
|
CSR_SETBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD);
|
|
CSR_SETBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/);
|
|
|
|
/* Select the address of the word we want to read */
|
|
CSR_WRITE_1(sc, VGE_EEADDR, addr);
|
|
|
|
/* Issue read command */
|
|
CSR_SETBIT_1(sc, VGE_EECMD, VGE_EECMD_ERD);
|
|
|
|
/* Wait for the done bit to be set. */
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
if (CSR_READ_1(sc, VGE_EECMD) & VGE_EECMD_EDONE)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT) {
|
|
device_printf(sc->vge_dev, "EEPROM read timed out\n");
|
|
*dest = 0;
|
|
return;
|
|
}
|
|
|
|
/* Read the result */
|
|
word = CSR_READ_2(sc, VGE_EERDDAT);
|
|
|
|
/* Turn off EEPROM access mode. */
|
|
CSR_CLRBIT_1(sc, VGE_EECSR, VGE_EECSR_EMBP/*|VGE_EECSR_ECS*/);
|
|
CSR_CLRBIT_1(sc, VGE_CHIPCFG2, VGE_CHIPCFG2_EELOAD);
|
|
|
|
*dest = word;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void
|
|
vge_read_eeprom(struct vge_softc *sc, caddr_t dest, int off, int cnt, int swap)
|
|
{
|
|
int i;
|
|
#ifdef VGE_EEPROM
|
|
uint16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
vge_eeprom_getword(sc, off + i, &word);
|
|
ptr = (uint16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
#else
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
dest[i] = CSR_READ_1(sc, VGE_PAR0 + i);
|
|
#endif
|
|
}
|
|
|
|
static void
|
|
vge_miipoll_stop(struct vge_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
CSR_WRITE_1(sc, VGE_MIICMD, 0);
|
|
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT)
|
|
device_printf(sc->vge_dev, "failed to idle MII autopoll\n");
|
|
}
|
|
|
|
static void
|
|
vge_miipoll_start(struct vge_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/* First, make sure we're idle. */
|
|
|
|
CSR_WRITE_1(sc, VGE_MIICMD, 0);
|
|
CSR_WRITE_1(sc, VGE_MIIADDR, VGE_MIIADDR_SWMPL);
|
|
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if (CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT) {
|
|
device_printf(sc->vge_dev, "failed to idle MII autopoll\n");
|
|
return;
|
|
}
|
|
|
|
/* Now enable auto poll mode. */
|
|
|
|
CSR_WRITE_1(sc, VGE_MIICMD, VGE_MIICMD_MAUTO);
|
|
|
|
/* And make sure it started. */
|
|
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VGE_MIISTS) & VGE_MIISTS_IIDL) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT)
|
|
device_printf(sc->vge_dev, "failed to start MII autopoll\n");
|
|
}
|
|
|
|
static int
|
|
vge_miibus_readreg(device_t dev, int phy, int reg)
|
|
{
|
|
struct vge_softc *sc;
|
|
int i;
|
|
uint16_t rval = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
vge_miipoll_stop(sc);
|
|
|
|
/* Specify the register we want to read. */
|
|
CSR_WRITE_1(sc, VGE_MIIADDR, reg);
|
|
|
|
/* Issue read command. */
|
|
CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_RCMD);
|
|
|
|
/* Wait for the read command bit to self-clear. */
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_RCMD) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT)
|
|
device_printf(sc->vge_dev, "MII read timed out\n");
|
|
else
|
|
rval = CSR_READ_2(sc, VGE_MIIDATA);
|
|
|
|
vge_miipoll_start(sc);
|
|
|
|
return (rval);
|
|
}
|
|
|
|
static int
|
|
vge_miibus_writereg(device_t dev, int phy, int reg, int data)
|
|
{
|
|
struct vge_softc *sc;
|
|
int i, rval = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
vge_miipoll_stop(sc);
|
|
|
|
/* Specify the register we want to write. */
|
|
CSR_WRITE_1(sc, VGE_MIIADDR, reg);
|
|
|
|
/* Specify the data we want to write. */
|
|
CSR_WRITE_2(sc, VGE_MIIDATA, data);
|
|
|
|
/* Issue write command. */
|
|
CSR_SETBIT_1(sc, VGE_MIICMD, VGE_MIICMD_WCMD);
|
|
|
|
/* Wait for the write command bit to self-clear. */
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VGE_MIICMD) & VGE_MIICMD_WCMD) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT) {
|
|
device_printf(sc->vge_dev, "MII write timed out\n");
|
|
rval = EIO;
|
|
}
|
|
|
|
vge_miipoll_start(sc);
|
|
|
|
return (rval);
|
|
}
|
|
|
|
static void
|
|
vge_cam_clear(struct vge_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* Turn off all the mask bits. This tells the chip
|
|
* that none of the entries in the CAM filter are valid.
|
|
* desired entries will be enabled as we fill the filter in.
|
|
*/
|
|
|
|
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
|
|
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK);
|
|
CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE);
|
|
for (i = 0; i < 8; i++)
|
|
CSR_WRITE_1(sc, VGE_CAM0 + i, 0);
|
|
|
|
/* Clear the VLAN filter too. */
|
|
|
|
CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|VGE_CAMADDR_AVSEL|0);
|
|
for (i = 0; i < 8; i++)
|
|
CSR_WRITE_1(sc, VGE_CAM0 + i, 0);
|
|
|
|
CSR_WRITE_1(sc, VGE_CAMADDR, 0);
|
|
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
|
|
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
|
|
|
|
sc->vge_camidx = 0;
|
|
}
|
|
|
|
static int
|
|
vge_cam_set(struct vge_softc *sc, uint8_t *addr)
|
|
{
|
|
int i, error = 0;
|
|
|
|
if (sc->vge_camidx == VGE_CAM_MAXADDRS)
|
|
return (ENOSPC);
|
|
|
|
/* Select the CAM data page. */
|
|
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
|
|
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMDATA);
|
|
|
|
/* Set the filter entry we want to update and enable writing. */
|
|
CSR_WRITE_1(sc, VGE_CAMADDR, VGE_CAMADDR_ENABLE|sc->vge_camidx);
|
|
|
|
/* Write the address to the CAM registers */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
CSR_WRITE_1(sc, VGE_CAM0 + i, addr[i]);
|
|
|
|
/* Issue a write command. */
|
|
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_WRITE);
|
|
|
|
/* Wake for it to clear. */
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VGE_CAMCTL) & VGE_CAMCTL_WRITE) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT) {
|
|
device_printf(sc->vge_dev, "setting CAM filter failed\n");
|
|
error = EIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Select the CAM mask page. */
|
|
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
|
|
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_CAMMASK);
|
|
|
|
/* Set the mask bit that enables this filter. */
|
|
CSR_SETBIT_1(sc, VGE_CAM0 + (sc->vge_camidx/8),
|
|
1<<(sc->vge_camidx & 7));
|
|
|
|
sc->vge_camidx++;
|
|
|
|
fail:
|
|
/* Turn off access to CAM. */
|
|
CSR_WRITE_1(sc, VGE_CAMADDR, 0);
|
|
CSR_CLRBIT_1(sc, VGE_CAMCTL, VGE_CAMCTL_PAGESEL);
|
|
CSR_SETBIT_1(sc, VGE_CAMCTL, VGE_PAGESEL_MAR);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
vge_setvlan(struct vge_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
uint8_t cfg;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vge_ifp;
|
|
cfg = CSR_READ_1(sc, VGE_RXCFG);
|
|
if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
|
|
cfg |= VGE_VTAG_OPT2;
|
|
else
|
|
cfg &= ~VGE_VTAG_OPT2;
|
|
CSR_WRITE_1(sc, VGE_RXCFG, cfg);
|
|
}
|
|
|
|
/*
|
|
* Program the multicast filter. We use the 64-entry CAM filter
|
|
* for perfect filtering. If there's more than 64 multicast addresses,
|
|
* we use the hash filter instead.
|
|
*/
|
|
static void
|
|
vge_rxfilter(struct vge_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ifmultiaddr *ifma;
|
|
uint32_t h, hashes[2];
|
|
uint8_t rxcfg;
|
|
int error = 0;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
/* First, zot all the multicast entries. */
|
|
hashes[0] = 0;
|
|
hashes[1] = 0;
|
|
|
|
rxcfg = CSR_READ_1(sc, VGE_RXCTL);
|
|
rxcfg &= ~(VGE_RXCTL_RX_MCAST | VGE_RXCTL_RX_BCAST |
|
|
VGE_RXCTL_RX_PROMISC);
|
|
/*
|
|
* Always allow VLAN oversized frames and frames for
|
|
* this host.
|
|
*/
|
|
rxcfg |= VGE_RXCTL_RX_GIANT | VGE_RXCTL_RX_UCAST;
|
|
|
|
ifp = sc->vge_ifp;
|
|
if ((ifp->if_flags & IFF_BROADCAST) != 0)
|
|
rxcfg |= VGE_RXCTL_RX_BCAST;
|
|
if ((ifp->if_flags & (IFF_PROMISC | IFF_ALLMULTI)) != 0) {
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0)
|
|
rxcfg |= VGE_RXCTL_RX_PROMISC;
|
|
if ((ifp->if_flags & IFF_ALLMULTI) != 0) {
|
|
hashes[0] = 0xFFFFFFFF;
|
|
hashes[1] = 0xFFFFFFFF;
|
|
}
|
|
goto done;
|
|
}
|
|
|
|
vge_cam_clear(sc);
|
|
/* Now program new ones */
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
error = vge_cam_set(sc,
|
|
LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
if (error)
|
|
break;
|
|
}
|
|
|
|
/* If there were too many addresses, use the hash filter. */
|
|
if (error) {
|
|
vge_cam_clear(sc);
|
|
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
|
|
ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
|
|
if (h < 32)
|
|
hashes[0] |= (1 << h);
|
|
else
|
|
hashes[1] |= (1 << (h - 32));
|
|
}
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
|
|
done:
|
|
if (hashes[0] != 0 || hashes[1] != 0)
|
|
rxcfg |= VGE_RXCTL_RX_MCAST;
|
|
CSR_WRITE_4(sc, VGE_MAR0, hashes[0]);
|
|
CSR_WRITE_4(sc, VGE_MAR1, hashes[1]);
|
|
CSR_WRITE_1(sc, VGE_RXCTL, rxcfg);
|
|
}
|
|
|
|
static void
|
|
vge_reset(struct vge_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_SOFTRESET);
|
|
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(5);
|
|
if ((CSR_READ_1(sc, VGE_CRS1) & VGE_CR1_SOFTRESET) == 0)
|
|
break;
|
|
}
|
|
|
|
if (i == VGE_TIMEOUT) {
|
|
device_printf(sc->vge_dev, "soft reset timed out\n");
|
|
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_STOP_FORCE);
|
|
DELAY(2000);
|
|
}
|
|
|
|
DELAY(5000);
|
|
}
|
|
|
|
/*
|
|
* Probe for a VIA gigabit chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int
|
|
vge_probe(device_t dev)
|
|
{
|
|
struct vge_type *t;
|
|
|
|
t = vge_devs;
|
|
|
|
while (t->vge_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->vge_vid) &&
|
|
(pci_get_device(dev) == t->vge_did)) {
|
|
device_set_desc(dev, t->vge_name);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Map a single buffer address.
|
|
*/
|
|
|
|
struct vge_dmamap_arg {
|
|
bus_addr_t vge_busaddr;
|
|
};
|
|
|
|
static void
|
|
vge_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
|
|
{
|
|
struct vge_dmamap_arg *ctx;
|
|
|
|
if (error != 0)
|
|
return;
|
|
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
ctx = (struct vge_dmamap_arg *)arg;
|
|
ctx->vge_busaddr = segs[0].ds_addr;
|
|
}
|
|
|
|
static int
|
|
vge_dma_alloc(struct vge_softc *sc)
|
|
{
|
|
struct vge_dmamap_arg ctx;
|
|
struct vge_txdesc *txd;
|
|
struct vge_rxdesc *rxd;
|
|
bus_addr_t lowaddr, tx_ring_end, rx_ring_end;
|
|
int error, i;
|
|
|
|
/*
|
|
* It seems old PCI controllers do not support DAC. DAC
|
|
* configuration can be enabled by accessing VGE_CHIPCFG3
|
|
* register but honor EEPROM configuration instead of
|
|
* blindly overriding DAC configuration. PCIe based
|
|
* controllers are supposed to support 64bit DMA so enable
|
|
* 64bit DMA on these controllers.
|
|
*/
|
|
if ((sc->vge_flags & VGE_FLAG_PCIE) != 0)
|
|
lowaddr = BUS_SPACE_MAXADDR;
|
|
else
|
|
lowaddr = BUS_SPACE_MAXADDR_32BIT;
|
|
|
|
again:
|
|
/* Create parent ring tag. */
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->vge_dev),/* parent */
|
|
1, 0, /* algnmnt, boundary */
|
|
lowaddr, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
|
|
0, /* nsegments */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vge_cdata.vge_ring_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not create parent DMA tag.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create tag for Tx ring. */
|
|
error = bus_dma_tag_create(sc->vge_cdata.vge_ring_tag,/* parent */
|
|
VGE_TX_RING_ALIGN, 0, /* algnmnt, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
VGE_TX_LIST_SZ, /* maxsize */
|
|
1, /* nsegments */
|
|
VGE_TX_LIST_SZ, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vge_cdata.vge_tx_ring_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not allocate Tx ring DMA tag.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create tag for Rx ring. */
|
|
error = bus_dma_tag_create(sc->vge_cdata.vge_ring_tag,/* parent */
|
|
VGE_RX_RING_ALIGN, 0, /* algnmnt, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
VGE_RX_LIST_SZ, /* maxsize */
|
|
1, /* nsegments */
|
|
VGE_RX_LIST_SZ, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vge_cdata.vge_rx_ring_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not allocate Rx ring DMA tag.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Allocate DMA'able memory and load the DMA map for Tx ring. */
|
|
error = bus_dmamem_alloc(sc->vge_cdata.vge_tx_ring_tag,
|
|
(void **)&sc->vge_rdata.vge_tx_ring,
|
|
BUS_DMA_WAITOK | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->vge_cdata.vge_tx_ring_map);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not allocate DMA'able memory for Tx ring.\n");
|
|
goto fail;
|
|
}
|
|
|
|
ctx.vge_busaddr = 0;
|
|
error = bus_dmamap_load(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_cdata.vge_tx_ring_map, sc->vge_rdata.vge_tx_ring,
|
|
VGE_TX_LIST_SZ, vge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
|
|
if (error != 0 || ctx.vge_busaddr == 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not load DMA'able memory for Tx ring.\n");
|
|
goto fail;
|
|
}
|
|
sc->vge_rdata.vge_tx_ring_paddr = ctx.vge_busaddr;
|
|
|
|
/* Allocate DMA'able memory and load the DMA map for Rx ring. */
|
|
error = bus_dmamem_alloc(sc->vge_cdata.vge_rx_ring_tag,
|
|
(void **)&sc->vge_rdata.vge_rx_ring,
|
|
BUS_DMA_WAITOK | BUS_DMA_ZERO | BUS_DMA_COHERENT,
|
|
&sc->vge_cdata.vge_rx_ring_map);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not allocate DMA'able memory for Rx ring.\n");
|
|
goto fail;
|
|
}
|
|
|
|
ctx.vge_busaddr = 0;
|
|
error = bus_dmamap_load(sc->vge_cdata.vge_rx_ring_tag,
|
|
sc->vge_cdata.vge_rx_ring_map, sc->vge_rdata.vge_rx_ring,
|
|
VGE_RX_LIST_SZ, vge_dmamap_cb, &ctx, BUS_DMA_NOWAIT);
|
|
if (error != 0 || ctx.vge_busaddr == 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not load DMA'able memory for Rx ring.\n");
|
|
goto fail;
|
|
}
|
|
sc->vge_rdata.vge_rx_ring_paddr = ctx.vge_busaddr;
|
|
|
|
/* Tx/Rx descriptor queue should reside within 4GB boundary. */
|
|
tx_ring_end = sc->vge_rdata.vge_tx_ring_paddr + VGE_TX_LIST_SZ;
|
|
rx_ring_end = sc->vge_rdata.vge_rx_ring_paddr + VGE_RX_LIST_SZ;
|
|
if ((VGE_ADDR_HI(tx_ring_end) !=
|
|
VGE_ADDR_HI(sc->vge_rdata.vge_tx_ring_paddr)) ||
|
|
(VGE_ADDR_HI(rx_ring_end) !=
|
|
VGE_ADDR_HI(sc->vge_rdata.vge_rx_ring_paddr)) ||
|
|
VGE_ADDR_HI(tx_ring_end) != VGE_ADDR_HI(rx_ring_end)) {
|
|
device_printf(sc->vge_dev, "4GB boundary crossed, "
|
|
"switching to 32bit DMA address mode.\n");
|
|
vge_dma_free(sc);
|
|
/* Limit DMA address space to 32bit and try again. */
|
|
lowaddr = BUS_SPACE_MAXADDR_32BIT;
|
|
goto again;
|
|
}
|
|
|
|
if ((sc->vge_flags & VGE_FLAG_PCIE) != 0)
|
|
lowaddr = VGE_BUF_DMA_MAXADDR;
|
|
else
|
|
lowaddr = BUS_SPACE_MAXADDR_32BIT;
|
|
/* Create parent buffer tag. */
|
|
error = bus_dma_tag_create(bus_get_dma_tag(sc->vge_dev),/* parent */
|
|
1, 0, /* algnmnt, boundary */
|
|
lowaddr, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* maxsize */
|
|
0, /* nsegments */
|
|
BUS_SPACE_MAXSIZE_32BIT, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vge_cdata.vge_buffer_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not create parent buffer DMA tag.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create tag for Tx buffers. */
|
|
error = bus_dma_tag_create(sc->vge_cdata.vge_buffer_tag,/* parent */
|
|
1, 0, /* algnmnt, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MCLBYTES * VGE_MAXTXSEGS, /* maxsize */
|
|
VGE_MAXTXSEGS, /* nsegments */
|
|
MCLBYTES, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vge_cdata.vge_tx_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev, "could not create Tx DMA tag.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create tag for Rx buffers. */
|
|
error = bus_dma_tag_create(sc->vge_cdata.vge_buffer_tag,/* parent */
|
|
VGE_RX_BUF_ALIGN, 0, /* algnmnt, boundary */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MCLBYTES, /* maxsize */
|
|
1, /* nsegments */
|
|
MCLBYTES, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lockfunc, lockarg */
|
|
&sc->vge_cdata.vge_rx_tag);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev, "could not create Rx DMA tag.\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create DMA maps for Tx buffers. */
|
|
for (i = 0; i < VGE_TX_DESC_CNT; i++) {
|
|
txd = &sc->vge_cdata.vge_txdesc[i];
|
|
txd->tx_m = NULL;
|
|
txd->tx_dmamap = NULL;
|
|
error = bus_dmamap_create(sc->vge_cdata.vge_tx_tag, 0,
|
|
&txd->tx_dmamap);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not create Tx dmamap.\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
/* Create DMA maps for Rx buffers. */
|
|
if ((error = bus_dmamap_create(sc->vge_cdata.vge_rx_tag, 0,
|
|
&sc->vge_cdata.vge_rx_sparemap)) != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not create spare Rx dmamap.\n");
|
|
goto fail;
|
|
}
|
|
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
|
|
rxd = &sc->vge_cdata.vge_rxdesc[i];
|
|
rxd->rx_m = NULL;
|
|
rxd->rx_dmamap = NULL;
|
|
error = bus_dmamap_create(sc->vge_cdata.vge_rx_tag, 0,
|
|
&rxd->rx_dmamap);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev,
|
|
"could not create Rx dmamap.\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
vge_dma_free(struct vge_softc *sc)
|
|
{
|
|
struct vge_txdesc *txd;
|
|
struct vge_rxdesc *rxd;
|
|
int i;
|
|
|
|
/* Tx ring. */
|
|
if (sc->vge_cdata.vge_tx_ring_tag != NULL) {
|
|
if (sc->vge_cdata.vge_tx_ring_map)
|
|
bus_dmamap_unload(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_cdata.vge_tx_ring_map);
|
|
if (sc->vge_cdata.vge_tx_ring_map &&
|
|
sc->vge_rdata.vge_tx_ring)
|
|
bus_dmamem_free(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_rdata.vge_tx_ring,
|
|
sc->vge_cdata.vge_tx_ring_map);
|
|
sc->vge_rdata.vge_tx_ring = NULL;
|
|
sc->vge_cdata.vge_tx_ring_map = NULL;
|
|
bus_dma_tag_destroy(sc->vge_cdata.vge_tx_ring_tag);
|
|
sc->vge_cdata.vge_tx_ring_tag = NULL;
|
|
}
|
|
/* Rx ring. */
|
|
if (sc->vge_cdata.vge_rx_ring_tag != NULL) {
|
|
if (sc->vge_cdata.vge_rx_ring_map)
|
|
bus_dmamap_unload(sc->vge_cdata.vge_rx_ring_tag,
|
|
sc->vge_cdata.vge_rx_ring_map);
|
|
if (sc->vge_cdata.vge_rx_ring_map &&
|
|
sc->vge_rdata.vge_rx_ring)
|
|
bus_dmamem_free(sc->vge_cdata.vge_rx_ring_tag,
|
|
sc->vge_rdata.vge_rx_ring,
|
|
sc->vge_cdata.vge_rx_ring_map);
|
|
sc->vge_rdata.vge_rx_ring = NULL;
|
|
sc->vge_cdata.vge_rx_ring_map = NULL;
|
|
bus_dma_tag_destroy(sc->vge_cdata.vge_rx_ring_tag);
|
|
sc->vge_cdata.vge_rx_ring_tag = NULL;
|
|
}
|
|
/* Tx buffers. */
|
|
if (sc->vge_cdata.vge_tx_tag != NULL) {
|
|
for (i = 0; i < VGE_TX_DESC_CNT; i++) {
|
|
txd = &sc->vge_cdata.vge_txdesc[i];
|
|
if (txd->tx_dmamap != NULL) {
|
|
bus_dmamap_destroy(sc->vge_cdata.vge_tx_tag,
|
|
txd->tx_dmamap);
|
|
txd->tx_dmamap = NULL;
|
|
}
|
|
}
|
|
bus_dma_tag_destroy(sc->vge_cdata.vge_tx_tag);
|
|
sc->vge_cdata.vge_tx_tag = NULL;
|
|
}
|
|
/* Rx buffers. */
|
|
if (sc->vge_cdata.vge_rx_tag != NULL) {
|
|
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
|
|
rxd = &sc->vge_cdata.vge_rxdesc[i];
|
|
if (rxd->rx_dmamap != NULL) {
|
|
bus_dmamap_destroy(sc->vge_cdata.vge_rx_tag,
|
|
rxd->rx_dmamap);
|
|
rxd->rx_dmamap = NULL;
|
|
}
|
|
}
|
|
if (sc->vge_cdata.vge_rx_sparemap != NULL) {
|
|
bus_dmamap_destroy(sc->vge_cdata.vge_rx_tag,
|
|
sc->vge_cdata.vge_rx_sparemap);
|
|
sc->vge_cdata.vge_rx_sparemap = NULL;
|
|
}
|
|
bus_dma_tag_destroy(sc->vge_cdata.vge_rx_tag);
|
|
sc->vge_cdata.vge_rx_tag = NULL;
|
|
}
|
|
|
|
if (sc->vge_cdata.vge_buffer_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->vge_cdata.vge_buffer_tag);
|
|
sc->vge_cdata.vge_buffer_tag = NULL;
|
|
}
|
|
if (sc->vge_cdata.vge_ring_tag != NULL) {
|
|
bus_dma_tag_destroy(sc->vge_cdata.vge_ring_tag);
|
|
sc->vge_cdata.vge_ring_tag = NULL;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int
|
|
vge_attach(device_t dev)
|
|
{
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
struct vge_softc *sc;
|
|
struct ifnet *ifp;
|
|
int error = 0, cap, i, msic, rid;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->vge_dev = dev;
|
|
|
|
mtx_init(&sc->vge_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
MTX_DEF);
|
|
callout_init_mtx(&sc->vge_watchdog, &sc->vge_mtx, 0);
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
pci_enable_busmaster(dev);
|
|
|
|
rid = PCIR_BAR(1);
|
|
sc->vge_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
|
|
if (sc->vge_res == NULL) {
|
|
device_printf(dev, "couldn't map ports/memory\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
if (pci_find_cap(dev, PCIY_EXPRESS, &cap) == 0) {
|
|
sc->vge_flags |= VGE_FLAG_PCIE;
|
|
sc->vge_expcap = cap;
|
|
} else
|
|
sc->vge_flags |= VGE_FLAG_JUMBO;
|
|
if (pci_find_cap(dev, PCIY_PMG, &cap) == 0) {
|
|
sc->vge_flags |= VGE_FLAG_PMCAP;
|
|
sc->vge_pmcap = cap;
|
|
}
|
|
rid = 0;
|
|
msic = pci_msi_count(dev);
|
|
if (msi_disable == 0 && msic > 0) {
|
|
msic = 1;
|
|
if (pci_alloc_msi(dev, &msic) == 0) {
|
|
if (msic == 1) {
|
|
sc->vge_flags |= VGE_FLAG_MSI;
|
|
device_printf(dev, "Using %d MSI message\n",
|
|
msic);
|
|
rid = 1;
|
|
} else
|
|
pci_release_msi(dev);
|
|
}
|
|
}
|
|
|
|
/* Allocate interrupt */
|
|
sc->vge_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
((sc->vge_flags & VGE_FLAG_MSI) ? 0 : RF_SHAREABLE) | RF_ACTIVE);
|
|
if (sc->vge_irq == NULL) {
|
|
device_printf(dev, "couldn't map interrupt\n");
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/* Reset the adapter. */
|
|
vge_reset(sc);
|
|
/* Reload EEPROM. */
|
|
CSR_WRITE_1(sc, VGE_EECSR, VGE_EECSR_RELOAD);
|
|
for (i = 0; i < VGE_TIMEOUT; i++) {
|
|
DELAY(5);
|
|
if ((CSR_READ_1(sc, VGE_EECSR) & VGE_EECSR_RELOAD) == 0)
|
|
break;
|
|
}
|
|
if (i == VGE_TIMEOUT)
|
|
device_printf(dev, "EEPROM reload timed out\n");
|
|
/*
|
|
* Clear PACPI as EEPROM reload will set the bit. Otherwise
|
|
* MAC will receive magic packet which in turn confuses
|
|
* controller.
|
|
*/
|
|
CSR_CLRBIT_1(sc, VGE_CHIPCFG0, VGE_CHIPCFG0_PACPI);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
vge_read_eeprom(sc, (caddr_t)eaddr, VGE_EE_EADDR, 3, 0);
|
|
/*
|
|
* Save configured PHY address.
|
|
* It seems the PHY address of PCIe controllers just
|
|
* reflects media jump strapping status so we assume the
|
|
* internal PHY address of PCIe controller is at 1.
|
|
*/
|
|
if ((sc->vge_flags & VGE_FLAG_PCIE) != 0)
|
|
sc->vge_phyaddr = 1;
|
|
else
|
|
sc->vge_phyaddr = CSR_READ_1(sc, VGE_MIICFG) &
|
|
VGE_MIICFG_PHYADDR;
|
|
/* Clear WOL and take hardware from powerdown. */
|
|
vge_clrwol(sc);
|
|
vge_sysctl_node(sc);
|
|
error = vge_dma_alloc(sc);
|
|
if (error)
|
|
goto fail;
|
|
|
|
ifp = sc->vge_ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
error = ENOSPC;
|
|
goto fail;
|
|
}
|
|
|
|
vge_miipoll_start(sc);
|
|
/* Do MII setup */
|
|
error = mii_attach(dev, &sc->vge_miibus, ifp, vge_ifmedia_upd,
|
|
vge_ifmedia_sts, BMSR_DEFCAPMASK, sc->vge_phyaddr, MII_OFFSET_ANY,
|
|
MIIF_DOPAUSE);
|
|
if (error != 0) {
|
|
device_printf(dev, "attaching PHYs failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
ifp->if_softc = sc;
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = vge_ioctl;
|
|
ifp->if_capabilities = IFCAP_VLAN_MTU;
|
|
ifp->if_start = vge_start;
|
|
ifp->if_hwassist = VGE_CSUM_FEATURES;
|
|
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_VLAN_HWCSUM |
|
|
IFCAP_VLAN_HWTAGGING;
|
|
if ((sc->vge_flags & VGE_FLAG_PMCAP) != 0)
|
|
ifp->if_capabilities |= IFCAP_WOL;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
#ifdef DEVICE_POLLING
|
|
ifp->if_capabilities |= IFCAP_POLLING;
|
|
#endif
|
|
ifp->if_init = vge_init;
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, VGE_TX_DESC_CNT - 1);
|
|
ifp->if_snd.ifq_drv_maxlen = VGE_TX_DESC_CNT - 1;
|
|
IFQ_SET_READY(&ifp->if_snd);
|
|
|
|
/*
|
|
* Call MI attach routine.
|
|
*/
|
|
ether_ifattach(ifp, eaddr);
|
|
|
|
/* Tell the upper layer(s) we support long frames. */
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
/* Hook interrupt last to avoid having to lock softc */
|
|
error = bus_setup_intr(dev, sc->vge_irq, INTR_TYPE_NET|INTR_MPSAFE,
|
|
NULL, vge_intr, sc, &sc->vge_intrhand);
|
|
|
|
if (error) {
|
|
device_printf(dev, "couldn't set up irq\n");
|
|
ether_ifdetach(ifp);
|
|
goto fail;
|
|
}
|
|
|
|
fail:
|
|
if (error)
|
|
vge_detach(dev);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Shutdown hardware and free up resources. This can be called any
|
|
* time after the mutex has been initialized. It is called in both
|
|
* the error case in attach and the normal detach case so it needs
|
|
* to be careful about only freeing resources that have actually been
|
|
* allocated.
|
|
*/
|
|
static int
|
|
vge_detach(device_t dev)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = device_get_softc(dev);
|
|
KASSERT(mtx_initialized(&sc->vge_mtx), ("vge mutex not initialized"));
|
|
ifp = sc->vge_ifp;
|
|
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING)
|
|
ether_poll_deregister(ifp);
|
|
#endif
|
|
|
|
/* These should only be active if attach succeeded */
|
|
if (device_is_attached(dev)) {
|
|
ether_ifdetach(ifp);
|
|
VGE_LOCK(sc);
|
|
vge_stop(sc);
|
|
VGE_UNLOCK(sc);
|
|
callout_drain(&sc->vge_watchdog);
|
|
}
|
|
if (sc->vge_miibus)
|
|
device_delete_child(dev, sc->vge_miibus);
|
|
bus_generic_detach(dev);
|
|
|
|
if (sc->vge_intrhand)
|
|
bus_teardown_intr(dev, sc->vge_irq, sc->vge_intrhand);
|
|
if (sc->vge_irq)
|
|
bus_release_resource(dev, SYS_RES_IRQ,
|
|
sc->vge_flags & VGE_FLAG_MSI ? 1 : 0, sc->vge_irq);
|
|
if (sc->vge_flags & VGE_FLAG_MSI)
|
|
pci_release_msi(dev);
|
|
if (sc->vge_res)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
PCIR_BAR(1), sc->vge_res);
|
|
if (ifp)
|
|
if_free(ifp);
|
|
|
|
vge_dma_free(sc);
|
|
mtx_destroy(&sc->vge_mtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
vge_discard_rxbuf(struct vge_softc *sc, int prod)
|
|
{
|
|
struct vge_rxdesc *rxd;
|
|
int i;
|
|
|
|
rxd = &sc->vge_cdata.vge_rxdesc[prod];
|
|
rxd->rx_desc->vge_sts = 0;
|
|
rxd->rx_desc->vge_ctl = 0;
|
|
|
|
/*
|
|
* Note: the manual fails to document the fact that for
|
|
* proper opration, the driver needs to replentish the RX
|
|
* DMA ring 4 descriptors at a time (rather than one at a
|
|
* time, like most chips). We can allocate the new buffers
|
|
* but we should not set the OWN bits until we're ready
|
|
* to hand back 4 of them in one shot.
|
|
*/
|
|
if ((prod % VGE_RXCHUNK) == (VGE_RXCHUNK - 1)) {
|
|
for (i = VGE_RXCHUNK; i > 0; i--) {
|
|
rxd->rx_desc->vge_sts = htole32(VGE_RDSTS_OWN);
|
|
rxd = rxd->rxd_prev;
|
|
}
|
|
sc->vge_cdata.vge_rx_commit += VGE_RXCHUNK;
|
|
}
|
|
}
|
|
|
|
static int
|
|
vge_newbuf(struct vge_softc *sc, int prod)
|
|
{
|
|
struct vge_rxdesc *rxd;
|
|
struct mbuf *m;
|
|
bus_dma_segment_t segs[1];
|
|
bus_dmamap_t map;
|
|
int i, nsegs;
|
|
|
|
m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
|
|
if (m == NULL)
|
|
return (ENOBUFS);
|
|
/*
|
|
* This is part of an evil trick to deal with strict-alignment
|
|
* architectures. The VIA chip requires RX buffers to be aligned
|
|
* on 32-bit boundaries, but that will hose strict-alignment
|
|
* architectures. To get around this, we leave some empty space
|
|
* at the start of each buffer and for non-strict-alignment hosts,
|
|
* we copy the buffer back two bytes to achieve word alignment.
|
|
* This is slightly more efficient than allocating a new buffer,
|
|
* copying the contents, and discarding the old buffer.
|
|
*/
|
|
m->m_len = m->m_pkthdr.len = MCLBYTES;
|
|
m_adj(m, VGE_RX_BUF_ALIGN);
|
|
|
|
if (bus_dmamap_load_mbuf_sg(sc->vge_cdata.vge_rx_tag,
|
|
sc->vge_cdata.vge_rx_sparemap, m, segs, &nsegs, 0) != 0) {
|
|
m_freem(m);
|
|
return (ENOBUFS);
|
|
}
|
|
KASSERT(nsegs == 1, ("%s: %d segments returned!", __func__, nsegs));
|
|
|
|
rxd = &sc->vge_cdata.vge_rxdesc[prod];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->vge_cdata.vge_rx_tag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->vge_cdata.vge_rx_tag, rxd->rx_dmamap);
|
|
}
|
|
map = rxd->rx_dmamap;
|
|
rxd->rx_dmamap = sc->vge_cdata.vge_rx_sparemap;
|
|
sc->vge_cdata.vge_rx_sparemap = map;
|
|
bus_dmamap_sync(sc->vge_cdata.vge_rx_tag, rxd->rx_dmamap,
|
|
BUS_DMASYNC_PREREAD);
|
|
rxd->rx_m = m;
|
|
|
|
rxd->rx_desc->vge_sts = 0;
|
|
rxd->rx_desc->vge_ctl = 0;
|
|
rxd->rx_desc->vge_addrlo = htole32(VGE_ADDR_LO(segs[0].ds_addr));
|
|
rxd->rx_desc->vge_addrhi = htole32(VGE_ADDR_HI(segs[0].ds_addr) |
|
|
(VGE_BUFLEN(segs[0].ds_len) << 16) | VGE_RXDESC_I);
|
|
|
|
/*
|
|
* Note: the manual fails to document the fact that for
|
|
* proper operation, the driver needs to replenish the RX
|
|
* DMA ring 4 descriptors at a time (rather than one at a
|
|
* time, like most chips). We can allocate the new buffers
|
|
* but we should not set the OWN bits until we're ready
|
|
* to hand back 4 of them in one shot.
|
|
*/
|
|
if ((prod % VGE_RXCHUNK) == (VGE_RXCHUNK - 1)) {
|
|
for (i = VGE_RXCHUNK; i > 0; i--) {
|
|
rxd->rx_desc->vge_sts = htole32(VGE_RDSTS_OWN);
|
|
rxd = rxd->rxd_prev;
|
|
}
|
|
sc->vge_cdata.vge_rx_commit += VGE_RXCHUNK;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
vge_tx_list_init(struct vge_softc *sc)
|
|
{
|
|
struct vge_ring_data *rd;
|
|
struct vge_txdesc *txd;
|
|
int i;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
sc->vge_cdata.vge_tx_prodidx = 0;
|
|
sc->vge_cdata.vge_tx_considx = 0;
|
|
sc->vge_cdata.vge_tx_cnt = 0;
|
|
|
|
rd = &sc->vge_rdata;
|
|
bzero(rd->vge_tx_ring, VGE_TX_LIST_SZ);
|
|
for (i = 0; i < VGE_TX_DESC_CNT; i++) {
|
|
txd = &sc->vge_cdata.vge_txdesc[i];
|
|
txd->tx_m = NULL;
|
|
txd->tx_desc = &rd->vge_tx_ring[i];
|
|
}
|
|
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_cdata.vge_tx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
vge_rx_list_init(struct vge_softc *sc)
|
|
{
|
|
struct vge_ring_data *rd;
|
|
struct vge_rxdesc *rxd;
|
|
int i;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
sc->vge_cdata.vge_rx_prodidx = 0;
|
|
sc->vge_cdata.vge_head = NULL;
|
|
sc->vge_cdata.vge_tail = NULL;
|
|
sc->vge_cdata.vge_rx_commit = 0;
|
|
|
|
rd = &sc->vge_rdata;
|
|
bzero(rd->vge_rx_ring, VGE_RX_LIST_SZ);
|
|
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
|
|
rxd = &sc->vge_cdata.vge_rxdesc[i];
|
|
rxd->rx_m = NULL;
|
|
rxd->rx_desc = &rd->vge_rx_ring[i];
|
|
if (i == 0)
|
|
rxd->rxd_prev =
|
|
&sc->vge_cdata.vge_rxdesc[VGE_RX_DESC_CNT - 1];
|
|
else
|
|
rxd->rxd_prev = &sc->vge_cdata.vge_rxdesc[i - 1];
|
|
if (vge_newbuf(sc, i) != 0)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
bus_dmamap_sync(sc->vge_cdata.vge_rx_ring_tag,
|
|
sc->vge_cdata.vge_rx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
sc->vge_cdata.vge_rx_commit = 0;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
vge_freebufs(struct vge_softc *sc)
|
|
{
|
|
struct vge_txdesc *txd;
|
|
struct vge_rxdesc *rxd;
|
|
struct ifnet *ifp;
|
|
int i;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vge_ifp;
|
|
/*
|
|
* Free RX and TX mbufs still in the queues.
|
|
*/
|
|
for (i = 0; i < VGE_RX_DESC_CNT; i++) {
|
|
rxd = &sc->vge_cdata.vge_rxdesc[i];
|
|
if (rxd->rx_m != NULL) {
|
|
bus_dmamap_sync(sc->vge_cdata.vge_rx_tag,
|
|
rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(sc->vge_cdata.vge_rx_tag,
|
|
rxd->rx_dmamap);
|
|
m_freem(rxd->rx_m);
|
|
rxd->rx_m = NULL;
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < VGE_TX_DESC_CNT; i++) {
|
|
txd = &sc->vge_cdata.vge_txdesc[i];
|
|
if (txd->tx_m != NULL) {
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_tag,
|
|
txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->vge_cdata.vge_tx_tag,
|
|
txd->tx_dmamap);
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
ifp->if_oerrors++;
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
static __inline void
|
|
vge_fixup_rx(struct mbuf *m)
|
|
{
|
|
int i;
|
|
uint16_t *src, *dst;
|
|
|
|
src = mtod(m, uint16_t *);
|
|
dst = src - 1;
|
|
|
|
for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++)
|
|
*dst++ = *src++;
|
|
|
|
m->m_data -= ETHER_ALIGN;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* RX handler. We support the reception of jumbo frames that have
|
|
* been fragmented across multiple 2K mbuf cluster buffers.
|
|
*/
|
|
static int
|
|
vge_rxeof(struct vge_softc *sc, int count)
|
|
{
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
int prod, prog, total_len;
|
|
struct vge_rxdesc *rxd;
|
|
struct vge_rx_desc *cur_rx;
|
|
uint32_t rxstat, rxctl;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vge_ifp;
|
|
|
|
bus_dmamap_sync(sc->vge_cdata.vge_rx_ring_tag,
|
|
sc->vge_cdata.vge_rx_ring_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
prod = sc->vge_cdata.vge_rx_prodidx;
|
|
for (prog = 0; count > 0 &&
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING) != 0;
|
|
VGE_RX_DESC_INC(prod)) {
|
|
cur_rx = &sc->vge_rdata.vge_rx_ring[prod];
|
|
rxstat = le32toh(cur_rx->vge_sts);
|
|
if ((rxstat & VGE_RDSTS_OWN) != 0)
|
|
break;
|
|
count--;
|
|
prog++;
|
|
rxctl = le32toh(cur_rx->vge_ctl);
|
|
total_len = VGE_RXBYTES(rxstat);
|
|
rxd = &sc->vge_cdata.vge_rxdesc[prod];
|
|
m = rxd->rx_m;
|
|
|
|
/*
|
|
* If the 'start of frame' bit is set, this indicates
|
|
* either the first fragment in a multi-fragment receive,
|
|
* or an intermediate fragment. Either way, we want to
|
|
* accumulate the buffers.
|
|
*/
|
|
if ((rxstat & VGE_RXPKT_SOF) != 0) {
|
|
if (vge_newbuf(sc, prod) != 0) {
|
|
ifp->if_iqdrops++;
|
|
VGE_CHAIN_RESET(sc);
|
|
vge_discard_rxbuf(sc, prod);
|
|
continue;
|
|
}
|
|
m->m_len = MCLBYTES - VGE_RX_BUF_ALIGN;
|
|
if (sc->vge_cdata.vge_head == NULL) {
|
|
sc->vge_cdata.vge_head = m;
|
|
sc->vge_cdata.vge_tail = m;
|
|
} else {
|
|
m->m_flags &= ~M_PKTHDR;
|
|
sc->vge_cdata.vge_tail->m_next = m;
|
|
sc->vge_cdata.vge_tail = m;
|
|
}
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Bad/error frames will have the RXOK bit cleared.
|
|
* However, there's one error case we want to allow:
|
|
* if a VLAN tagged frame arrives and the chip can't
|
|
* match it against the CAM filter, it considers this
|
|
* a 'VLAN CAM filter miss' and clears the 'RXOK' bit.
|
|
* We don't want to drop the frame though: our VLAN
|
|
* filtering is done in software.
|
|
* We also want to receive bad-checksummed frames and
|
|
* and frames with bad-length.
|
|
*/
|
|
if ((rxstat & VGE_RDSTS_RXOK) == 0 &&
|
|
(rxstat & (VGE_RDSTS_VIDM | VGE_RDSTS_RLERR |
|
|
VGE_RDSTS_CSUMERR)) == 0) {
|
|
ifp->if_ierrors++;
|
|
/*
|
|
* If this is part of a multi-fragment packet,
|
|
* discard all the pieces.
|
|
*/
|
|
VGE_CHAIN_RESET(sc);
|
|
vge_discard_rxbuf(sc, prod);
|
|
continue;
|
|
}
|
|
|
|
if (vge_newbuf(sc, prod) != 0) {
|
|
ifp->if_iqdrops++;
|
|
VGE_CHAIN_RESET(sc);
|
|
vge_discard_rxbuf(sc, prod);
|
|
continue;
|
|
}
|
|
|
|
/* Chain received mbufs. */
|
|
if (sc->vge_cdata.vge_head != NULL) {
|
|
m->m_len = total_len % (MCLBYTES - VGE_RX_BUF_ALIGN);
|
|
/*
|
|
* Special case: if there's 4 bytes or less
|
|
* in this buffer, the mbuf can be discarded:
|
|
* the last 4 bytes is the CRC, which we don't
|
|
* care about anyway.
|
|
*/
|
|
if (m->m_len <= ETHER_CRC_LEN) {
|
|
sc->vge_cdata.vge_tail->m_len -=
|
|
(ETHER_CRC_LEN - m->m_len);
|
|
m_freem(m);
|
|
} else {
|
|
m->m_len -= ETHER_CRC_LEN;
|
|
m->m_flags &= ~M_PKTHDR;
|
|
sc->vge_cdata.vge_tail->m_next = m;
|
|
}
|
|
m = sc->vge_cdata.vge_head;
|
|
m->m_flags |= M_PKTHDR;
|
|
m->m_pkthdr.len = total_len - ETHER_CRC_LEN;
|
|
} else {
|
|
m->m_flags |= M_PKTHDR;
|
|
m->m_pkthdr.len = m->m_len =
|
|
(total_len - ETHER_CRC_LEN);
|
|
}
|
|
|
|
#ifndef __NO_STRICT_ALIGNMENT
|
|
vge_fixup_rx(m);
|
|
#endif
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
/* Do RX checksumming if enabled */
|
|
if ((ifp->if_capenable & IFCAP_RXCSUM) != 0 &&
|
|
(rxctl & VGE_RDCTL_FRAG) == 0) {
|
|
/* Check IP header checksum */
|
|
if ((rxctl & VGE_RDCTL_IPPKT) != 0)
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_CHECKED;
|
|
if ((rxctl & VGE_RDCTL_IPCSUMOK) != 0)
|
|
m->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
|
|
/* Check TCP/UDP checksum */
|
|
if (rxctl & (VGE_RDCTL_TCPPKT | VGE_RDCTL_UDPPKT) &&
|
|
rxctl & VGE_RDCTL_PROTOCSUMOK) {
|
|
m->m_pkthdr.csum_flags |=
|
|
CSUM_DATA_VALID | CSUM_PSEUDO_HDR;
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
}
|
|
}
|
|
|
|
if ((rxstat & VGE_RDSTS_VTAG) != 0) {
|
|
/*
|
|
* The 32-bit rxctl register is stored in little-endian.
|
|
* However, the 16-bit vlan tag is stored in big-endian,
|
|
* so we have to byte swap it.
|
|
*/
|
|
m->m_pkthdr.ether_vtag =
|
|
bswap16(rxctl & VGE_RDCTL_VLANID);
|
|
m->m_flags |= M_VLANTAG;
|
|
}
|
|
|
|
VGE_UNLOCK(sc);
|
|
(*ifp->if_input)(ifp, m);
|
|
VGE_LOCK(sc);
|
|
sc->vge_cdata.vge_head = NULL;
|
|
sc->vge_cdata.vge_tail = NULL;
|
|
}
|
|
|
|
if (prog > 0) {
|
|
sc->vge_cdata.vge_rx_prodidx = prod;
|
|
bus_dmamap_sync(sc->vge_cdata.vge_rx_ring_tag,
|
|
sc->vge_cdata.vge_rx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
/* Update residue counter. */
|
|
if (sc->vge_cdata.vge_rx_commit != 0) {
|
|
CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT,
|
|
sc->vge_cdata.vge_rx_commit);
|
|
sc->vge_cdata.vge_rx_commit = 0;
|
|
}
|
|
}
|
|
return (prog);
|
|
}
|
|
|
|
static void
|
|
vge_txeof(struct vge_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct vge_tx_desc *cur_tx;
|
|
struct vge_txdesc *txd;
|
|
uint32_t txstat;
|
|
int cons, prod;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
ifp = sc->vge_ifp;
|
|
|
|
if (sc->vge_cdata.vge_tx_cnt == 0)
|
|
return;
|
|
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_cdata.vge_tx_ring_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
cons = sc->vge_cdata.vge_tx_considx;
|
|
prod = sc->vge_cdata.vge_tx_prodidx;
|
|
for (; cons != prod; VGE_TX_DESC_INC(cons)) {
|
|
cur_tx = &sc->vge_rdata.vge_tx_ring[cons];
|
|
txstat = le32toh(cur_tx->vge_sts);
|
|
if ((txstat & VGE_TDSTS_OWN) != 0)
|
|
break;
|
|
sc->vge_cdata.vge_tx_cnt--;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
txd = &sc->vge_cdata.vge_txdesc[cons];
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(sc->vge_cdata.vge_tx_tag, txd->tx_dmamap);
|
|
|
|
KASSERT(txd->tx_m != NULL, ("%s: freeing NULL mbuf!\n",
|
|
__func__));
|
|
m_freem(txd->tx_m);
|
|
txd->tx_m = NULL;
|
|
txd->tx_desc->vge_frag[0].vge_addrhi = 0;
|
|
}
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_cdata.vge_tx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
sc->vge_cdata.vge_tx_considx = cons;
|
|
if (sc->vge_cdata.vge_tx_cnt == 0)
|
|
sc->vge_timer = 0;
|
|
}
|
|
|
|
static void
|
|
vge_link_statchg(void *xsc)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct ifnet *ifp;
|
|
uint8_t physts;
|
|
|
|
sc = xsc;
|
|
ifp = sc->vge_ifp;
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
physts = CSR_READ_1(sc, VGE_PHYSTS0);
|
|
if ((physts & VGE_PHYSTS_RESETSTS) == 0) {
|
|
if ((physts & VGE_PHYSTS_LINK) == 0) {
|
|
sc->vge_flags &= ~VGE_FLAG_LINK;
|
|
if_link_state_change(sc->vge_ifp,
|
|
LINK_STATE_DOWN);
|
|
} else {
|
|
sc->vge_flags |= VGE_FLAG_LINK;
|
|
if_link_state_change(sc->vge_ifp,
|
|
LINK_STATE_UP);
|
|
CSR_WRITE_1(sc, VGE_CRC2, VGE_CR2_FDX_TXFLOWCTL_ENABLE |
|
|
VGE_CR2_FDX_RXFLOWCTL_ENABLE);
|
|
if ((physts & VGE_PHYSTS_FDX) != 0) {
|
|
if ((physts & VGE_PHYSTS_TXFLOWCAP) != 0)
|
|
CSR_WRITE_1(sc, VGE_CRS2,
|
|
VGE_CR2_FDX_TXFLOWCTL_ENABLE);
|
|
if ((physts & VGE_PHYSTS_RXFLOWCAP) != 0)
|
|
CSR_WRITE_1(sc, VGE_CRS2,
|
|
VGE_CR2_FDX_RXFLOWCTL_ENABLE);
|
|
}
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
vge_start_locked(ifp);
|
|
}
|
|
}
|
|
/*
|
|
* Restart MII auto-polling because link state change interrupt
|
|
* will disable it.
|
|
*/
|
|
vge_miipoll_start(sc);
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
static int
|
|
vge_poll (struct ifnet *ifp, enum poll_cmd cmd, int count)
|
|
{
|
|
struct vge_softc *sc = ifp->if_softc;
|
|
int rx_npkts = 0;
|
|
|
|
VGE_LOCK(sc);
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING))
|
|
goto done;
|
|
|
|
rx_npkts = vge_rxeof(sc, count);
|
|
vge_txeof(sc);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
vge_start_locked(ifp);
|
|
|
|
if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */
|
|
uint32_t status;
|
|
status = CSR_READ_4(sc, VGE_ISR);
|
|
if (status == 0xFFFFFFFF)
|
|
goto done;
|
|
if (status)
|
|
CSR_WRITE_4(sc, VGE_ISR, status);
|
|
|
|
/*
|
|
* XXX check behaviour on receiver stalls.
|
|
*/
|
|
|
|
if (status & VGE_ISR_TXDMA_STALL ||
|
|
status & VGE_ISR_RXDMA_STALL) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vge_init_locked(sc);
|
|
}
|
|
|
|
if (status & (VGE_ISR_RXOFLOW|VGE_ISR_RXNODESC)) {
|
|
vge_rxeof(sc, count);
|
|
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
|
|
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
|
|
}
|
|
}
|
|
done:
|
|
VGE_UNLOCK(sc);
|
|
return (rx_npkts);
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
|
|
static void
|
|
vge_intr(void *arg)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct ifnet *ifp;
|
|
uint32_t status;
|
|
|
|
sc = arg;
|
|
VGE_LOCK(sc);
|
|
|
|
ifp = sc->vge_ifp;
|
|
if ((sc->vge_flags & VGE_FLAG_SUSPENDED) != 0 ||
|
|
(ifp->if_flags & IFF_UP) == 0) {
|
|
VGE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
|
|
#ifdef DEVICE_POLLING
|
|
if (ifp->if_capenable & IFCAP_POLLING) {
|
|
status = CSR_READ_4(sc, VGE_ISR);
|
|
CSR_WRITE_4(sc, VGE_ISR, status);
|
|
if (status != 0xFFFFFFFF && (status & VGE_ISR_LINKSTS) != 0)
|
|
vge_link_statchg(sc);
|
|
VGE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Disable interrupts */
|
|
CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK);
|
|
status = CSR_READ_4(sc, VGE_ISR);
|
|
CSR_WRITE_4(sc, VGE_ISR, status | VGE_ISR_HOLDOFF_RELOAD);
|
|
/* If the card has gone away the read returns 0xffff. */
|
|
if (status == 0xFFFFFFFF || (status & VGE_INTRS) == 0)
|
|
goto done;
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
|
|
if (status & (VGE_ISR_RXOK|VGE_ISR_RXOK_HIPRIO))
|
|
vge_rxeof(sc, VGE_RX_DESC_CNT);
|
|
if (status & (VGE_ISR_RXOFLOW|VGE_ISR_RXNODESC)) {
|
|
vge_rxeof(sc, VGE_RX_DESC_CNT);
|
|
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
|
|
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
|
|
}
|
|
|
|
if (status & (VGE_ISR_TXOK0|VGE_ISR_TXOK_HIPRIO))
|
|
vge_txeof(sc);
|
|
|
|
if (status & (VGE_ISR_TXDMA_STALL|VGE_ISR_RXDMA_STALL)) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vge_init_locked(sc);
|
|
}
|
|
|
|
if (status & VGE_ISR_LINKSTS)
|
|
vge_link_statchg(sc);
|
|
}
|
|
done:
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
|
|
/* Re-enable interrupts */
|
|
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
|
|
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
vge_start_locked(ifp);
|
|
}
|
|
VGE_UNLOCK(sc);
|
|
}
|
|
|
|
static int
|
|
vge_encap(struct vge_softc *sc, struct mbuf **m_head)
|
|
{
|
|
struct vge_txdesc *txd;
|
|
struct vge_tx_frag *frag;
|
|
struct mbuf *m;
|
|
bus_dma_segment_t txsegs[VGE_MAXTXSEGS];
|
|
int error, i, nsegs, padlen;
|
|
uint32_t cflags;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
M_ASSERTPKTHDR((*m_head));
|
|
|
|
/* Argh. This chip does not autopad short frames. */
|
|
if ((*m_head)->m_pkthdr.len < VGE_MIN_FRAMELEN) {
|
|
m = *m_head;
|
|
padlen = VGE_MIN_FRAMELEN - m->m_pkthdr.len;
|
|
if (M_WRITABLE(m) == 0) {
|
|
/* Get a writable copy. */
|
|
m = m_dup(*m_head, M_NOWAIT);
|
|
m_freem(*m_head);
|
|
if (m == NULL) {
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_head = m;
|
|
}
|
|
if (M_TRAILINGSPACE(m) < padlen) {
|
|
m = m_defrag(m, M_NOWAIT);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
}
|
|
/*
|
|
* Manually pad short frames, and zero the pad space
|
|
* to avoid leaking data.
|
|
*/
|
|
bzero(mtod(m, char *) + m->m_pkthdr.len, padlen);
|
|
m->m_pkthdr.len += padlen;
|
|
m->m_len = m->m_pkthdr.len;
|
|
*m_head = m;
|
|
}
|
|
|
|
txd = &sc->vge_cdata.vge_txdesc[sc->vge_cdata.vge_tx_prodidx];
|
|
|
|
error = bus_dmamap_load_mbuf_sg(sc->vge_cdata.vge_tx_tag,
|
|
txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
|
|
if (error == EFBIG) {
|
|
m = m_collapse(*m_head, M_NOWAIT, VGE_MAXTXSEGS);
|
|
if (m == NULL) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (ENOMEM);
|
|
}
|
|
*m_head = m;
|
|
error = bus_dmamap_load_mbuf_sg(sc->vge_cdata.vge_tx_tag,
|
|
txd->tx_dmamap, *m_head, txsegs, &nsegs, 0);
|
|
if (error != 0) {
|
|
m_freem(*m_head);
|
|
*m_head = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error != 0)
|
|
return (error);
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_tag, txd->tx_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
|
|
m = *m_head;
|
|
cflags = 0;
|
|
|
|
/* Configure checksum offload. */
|
|
if ((m->m_pkthdr.csum_flags & CSUM_IP) != 0)
|
|
cflags |= VGE_TDCTL_IPCSUM;
|
|
if ((m->m_pkthdr.csum_flags & CSUM_TCP) != 0)
|
|
cflags |= VGE_TDCTL_TCPCSUM;
|
|
if ((m->m_pkthdr.csum_flags & CSUM_UDP) != 0)
|
|
cflags |= VGE_TDCTL_UDPCSUM;
|
|
|
|
/* Configure VLAN. */
|
|
if ((m->m_flags & M_VLANTAG) != 0)
|
|
cflags |= m->m_pkthdr.ether_vtag | VGE_TDCTL_VTAG;
|
|
txd->tx_desc->vge_sts = htole32(m->m_pkthdr.len << 16);
|
|
/*
|
|
* XXX
|
|
* Velocity family seems to support TSO but no information
|
|
* for MSS configuration is available. Also the number of
|
|
* fragments supported by a descriptor is too small to hold
|
|
* entire 64KB TCP/IP segment. Maybe VGE_TD_LS_MOF,
|
|
* VGE_TD_LS_SOF and VGE_TD_LS_EOF could be used to build
|
|
* longer chain of buffers but no additional information is
|
|
* available.
|
|
*
|
|
* When telling the chip how many segments there are, we
|
|
* must use nsegs + 1 instead of just nsegs. Darned if I
|
|
* know why. This also means we can't use the last fragment
|
|
* field of Tx descriptor.
|
|
*/
|
|
txd->tx_desc->vge_ctl = htole32(cflags | ((nsegs + 1) << 28) |
|
|
VGE_TD_LS_NORM);
|
|
for (i = 0; i < nsegs; i++) {
|
|
frag = &txd->tx_desc->vge_frag[i];
|
|
frag->vge_addrlo = htole32(VGE_ADDR_LO(txsegs[i].ds_addr));
|
|
frag->vge_addrhi = htole32(VGE_ADDR_HI(txsegs[i].ds_addr) |
|
|
(VGE_BUFLEN(txsegs[i].ds_len) << 16));
|
|
}
|
|
|
|
sc->vge_cdata.vge_tx_cnt++;
|
|
VGE_TX_DESC_INC(sc->vge_cdata.vge_tx_prodidx);
|
|
|
|
/*
|
|
* Finally request interrupt and give the first descriptor
|
|
* ownership to hardware.
|
|
*/
|
|
txd->tx_desc->vge_ctl |= htole32(VGE_TDCTL_TIC);
|
|
txd->tx_desc->vge_sts |= htole32(VGE_TDSTS_OWN);
|
|
txd->tx_m = m;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine.
|
|
*/
|
|
|
|
static void
|
|
vge_start(struct ifnet *ifp)
|
|
{
|
|
struct vge_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
VGE_LOCK(sc);
|
|
vge_start_locked(ifp);
|
|
VGE_UNLOCK(sc);
|
|
}
|
|
|
|
|
|
static void
|
|
vge_start_locked(struct ifnet *ifp)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct vge_txdesc *txd;
|
|
struct mbuf *m_head;
|
|
int enq, idx;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
if ((sc->vge_flags & VGE_FLAG_LINK) == 0 ||
|
|
(ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)
|
|
return;
|
|
|
|
idx = sc->vge_cdata.vge_tx_prodidx;
|
|
VGE_TX_DESC_DEC(idx);
|
|
for (enq = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) &&
|
|
sc->vge_cdata.vge_tx_cnt < VGE_TX_DESC_CNT - 1; ) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
/*
|
|
* Pack the data into the transmit ring. If we
|
|
* don't have room, set the OACTIVE flag and wait
|
|
* for the NIC to drain the ring.
|
|
*/
|
|
if (vge_encap(sc, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
txd = &sc->vge_cdata.vge_txdesc[idx];
|
|
txd->tx_desc->vge_frag[0].vge_addrhi |= htole32(VGE_TXDESC_Q);
|
|
VGE_TX_DESC_INC(idx);
|
|
|
|
enq++;
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
}
|
|
|
|
if (enq > 0) {
|
|
bus_dmamap_sync(sc->vge_cdata.vge_tx_ring_tag,
|
|
sc->vge_cdata.vge_tx_ring_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
/* Issue a transmit command. */
|
|
CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_WAK0);
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
sc->vge_timer = 5;
|
|
}
|
|
}
|
|
|
|
static void
|
|
vge_init(void *xsc)
|
|
{
|
|
struct vge_softc *sc = xsc;
|
|
|
|
VGE_LOCK(sc);
|
|
vge_init_locked(sc);
|
|
VGE_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
vge_init_locked(struct vge_softc *sc)
|
|
{
|
|
struct ifnet *ifp = sc->vge_ifp;
|
|
int error, i;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
return;
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
vge_stop(sc);
|
|
vge_reset(sc);
|
|
vge_miipoll_start(sc);
|
|
|
|
/*
|
|
* Initialize the RX and TX descriptors and mbufs.
|
|
*/
|
|
|
|
error = vge_rx_list_init(sc);
|
|
if (error != 0) {
|
|
device_printf(sc->vge_dev, "no memory for Rx buffers.\n");
|
|
return;
|
|
}
|
|
vge_tx_list_init(sc);
|
|
/* Clear MAC statistics. */
|
|
vge_stats_clear(sc);
|
|
/* Set our station address */
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++)
|
|
CSR_WRITE_1(sc, VGE_PAR0 + i, IF_LLADDR(sc->vge_ifp)[i]);
|
|
|
|
/*
|
|
* Set receive FIFO threshold. Also allow transmission and
|
|
* reception of VLAN tagged frames.
|
|
*/
|
|
CSR_CLRBIT_1(sc, VGE_RXCFG, VGE_RXCFG_FIFO_THR|VGE_RXCFG_VTAGOPT);
|
|
CSR_SETBIT_1(sc, VGE_RXCFG, VGE_RXFIFOTHR_128BYTES);
|
|
|
|
/* Set DMA burst length */
|
|
CSR_CLRBIT_1(sc, VGE_DMACFG0, VGE_DMACFG0_BURSTLEN);
|
|
CSR_SETBIT_1(sc, VGE_DMACFG0, VGE_DMABURST_128);
|
|
|
|
CSR_SETBIT_1(sc, VGE_TXCFG, VGE_TXCFG_ARB_PRIO|VGE_TXCFG_NONBLK);
|
|
|
|
/* Set collision backoff algorithm */
|
|
CSR_CLRBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_CRANDOM|
|
|
VGE_CHIPCFG1_CAP|VGE_CHIPCFG1_MBA|VGE_CHIPCFG1_BAKOPT);
|
|
CSR_SETBIT_1(sc, VGE_CHIPCFG1, VGE_CHIPCFG1_OFSET);
|
|
|
|
/* Disable LPSEL field in priority resolution */
|
|
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_LPSEL_DIS);
|
|
|
|
/*
|
|
* Load the addresses of the DMA queues into the chip.
|
|
* Note that we only use one transmit queue.
|
|
*/
|
|
|
|
CSR_WRITE_4(sc, VGE_TXDESC_HIADDR,
|
|
VGE_ADDR_HI(sc->vge_rdata.vge_tx_ring_paddr));
|
|
CSR_WRITE_4(sc, VGE_TXDESC_ADDR_LO0,
|
|
VGE_ADDR_LO(sc->vge_rdata.vge_tx_ring_paddr));
|
|
CSR_WRITE_2(sc, VGE_TXDESCNUM, VGE_TX_DESC_CNT - 1);
|
|
|
|
CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO,
|
|
VGE_ADDR_LO(sc->vge_rdata.vge_rx_ring_paddr));
|
|
CSR_WRITE_2(sc, VGE_RXDESCNUM, VGE_RX_DESC_CNT - 1);
|
|
CSR_WRITE_2(sc, VGE_RXDESC_RESIDUECNT, VGE_RX_DESC_CNT);
|
|
|
|
/* Configure interrupt moderation. */
|
|
vge_intr_holdoff(sc);
|
|
|
|
/* Enable and wake up the RX descriptor queue */
|
|
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_RUN);
|
|
CSR_WRITE_1(sc, VGE_RXQCSRS, VGE_RXQCSR_WAK);
|
|
|
|
/* Enable the TX descriptor queue */
|
|
CSR_WRITE_2(sc, VGE_TXQCSRS, VGE_TXQCSR_RUN0);
|
|
|
|
/* Init the cam filter. */
|
|
vge_cam_clear(sc);
|
|
|
|
/* Set up receiver filter. */
|
|
vge_rxfilter(sc);
|
|
vge_setvlan(sc);
|
|
|
|
/* Initialize pause timer. */
|
|
CSR_WRITE_2(sc, VGE_TX_PAUSE_TIMER, 0xFFFF);
|
|
/*
|
|
* Initialize flow control parameters.
|
|
* TX XON high threshold : 48
|
|
* TX pause low threshold : 24
|
|
* Disable hald-duplex flow control
|
|
*/
|
|
CSR_WRITE_1(sc, VGE_CRC2, 0xFF);
|
|
CSR_WRITE_1(sc, VGE_CRS2, VGE_CR2_XON_ENABLE | 0x0B);
|
|
|
|
/* Enable jumbo frame reception (if desired) */
|
|
|
|
/* Start the MAC. */
|
|
CSR_WRITE_1(sc, VGE_CRC0, VGE_CR0_STOP);
|
|
CSR_WRITE_1(sc, VGE_CRS1, VGE_CR1_NOPOLL);
|
|
CSR_WRITE_1(sc, VGE_CRS0,
|
|
VGE_CR0_TX_ENABLE|VGE_CR0_RX_ENABLE|VGE_CR0_START);
|
|
|
|
#ifdef DEVICE_POLLING
|
|
/*
|
|
* Disable interrupts except link state change if we are polling.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_POLLING) {
|
|
CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS_POLLING);
|
|
} else /* otherwise ... */
|
|
#endif
|
|
{
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS);
|
|
}
|
|
CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF);
|
|
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
|
|
|
|
sc->vge_flags &= ~VGE_FLAG_LINK;
|
|
vge_ifmedia_upd_locked(sc);
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
callout_reset(&sc->vge_watchdog, hz, vge_watchdog, sc);
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int
|
|
vge_ifmedia_upd(struct ifnet *ifp)
|
|
{
|
|
struct vge_softc *sc;
|
|
int error;
|
|
|
|
sc = ifp->if_softc;
|
|
VGE_LOCK(sc);
|
|
error = vge_ifmedia_upd_locked(sc);
|
|
VGE_UNLOCK(sc);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
vge_ifmedia_upd_locked(struct vge_softc *sc)
|
|
{
|
|
struct mii_data *mii;
|
|
struct mii_softc *miisc;
|
|
int error;
|
|
|
|
mii = device_get_softc(sc->vge_miibus);
|
|
LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
|
|
PHY_RESET(miisc);
|
|
vge_setmedia(sc);
|
|
error = mii_mediachg(mii);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void
|
|
vge_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
mii = device_get_softc(sc->vge_miibus);
|
|
|
|
VGE_LOCK(sc);
|
|
if ((ifp->if_flags & IFF_UP) == 0) {
|
|
VGE_UNLOCK(sc);
|
|
return;
|
|
}
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
VGE_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
vge_setmedia(struct vge_softc *sc)
|
|
{
|
|
struct mii_data *mii;
|
|
struct ifmedia_entry *ife;
|
|
|
|
mii = device_get_softc(sc->vge_miibus);
|
|
ife = mii->mii_media.ifm_cur;
|
|
|
|
/*
|
|
* If the user manually selects a media mode, we need to turn
|
|
* on the forced MAC mode bit in the DIAGCTL register. If the
|
|
* user happens to choose a full duplex mode, we also need to
|
|
* set the 'force full duplex' bit. This applies only to
|
|
* 10Mbps and 100Mbps speeds. In autoselect mode, forced MAC
|
|
* mode is disabled, and in 1000baseT mode, full duplex is
|
|
* always implied, so we turn on the forced mode bit but leave
|
|
* the FDX bit cleared.
|
|
*/
|
|
|
|
switch (IFM_SUBTYPE(ife->ifm_media)) {
|
|
case IFM_AUTO:
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
|
|
break;
|
|
case IFM_1000_T:
|
|
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
|
|
break;
|
|
case IFM_100_TX:
|
|
case IFM_10_T:
|
|
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
|
|
if ((ife->ifm_media & IFM_GMASK) == IFM_FDX) {
|
|
CSR_SETBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
|
|
} else {
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
|
|
}
|
|
break;
|
|
default:
|
|
device_printf(sc->vge_dev, "unknown media type: %x\n",
|
|
IFM_SUBTYPE(ife->ifm_media));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
vge_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct vge_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int error = 0, mask;
|
|
|
|
switch (command) {
|
|
case SIOCSIFMTU:
|
|
VGE_LOCK(sc);
|
|
if (ifr->ifr_mtu < ETHERMIN || ifr->ifr_mtu > VGE_JUMBO_MTU)
|
|
error = EINVAL;
|
|
else if (ifp->if_mtu != ifr->ifr_mtu) {
|
|
if (ifr->ifr_mtu > ETHERMTU &&
|
|
(sc->vge_flags & VGE_FLAG_JUMBO) == 0)
|
|
error = EINVAL;
|
|
else
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
}
|
|
VGE_UNLOCK(sc);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
VGE_LOCK(sc);
|
|
if ((ifp->if_flags & IFF_UP) != 0) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0 &&
|
|
((ifp->if_flags ^ sc->vge_if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI)) != 0)
|
|
vge_rxfilter(sc);
|
|
else
|
|
vge_init_locked(sc);
|
|
} else if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
|
|
vge_stop(sc);
|
|
sc->vge_if_flags = ifp->if_flags;
|
|
VGE_UNLOCK(sc);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
VGE_LOCK(sc);
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
vge_rxfilter(sc);
|
|
VGE_UNLOCK(sc);
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->vge_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
#ifdef DEVICE_POLLING
|
|
if (mask & IFCAP_POLLING) {
|
|
if (ifr->ifr_reqcap & IFCAP_POLLING) {
|
|
error = ether_poll_register(vge_poll, ifp);
|
|
if (error)
|
|
return (error);
|
|
VGE_LOCK(sc);
|
|
/* Disable interrupts */
|
|
CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS_POLLING);
|
|
CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF);
|
|
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
|
|
ifp->if_capenable |= IFCAP_POLLING;
|
|
VGE_UNLOCK(sc);
|
|
} else {
|
|
error = ether_poll_deregister(ifp);
|
|
/* Enable interrupts. */
|
|
VGE_LOCK(sc);
|
|
CSR_WRITE_4(sc, VGE_IMR, VGE_INTRS);
|
|
CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF);
|
|
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_GMSK);
|
|
ifp->if_capenable &= ~IFCAP_POLLING;
|
|
VGE_UNLOCK(sc);
|
|
}
|
|
}
|
|
#endif /* DEVICE_POLLING */
|
|
VGE_LOCK(sc);
|
|
if ((mask & IFCAP_TXCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_TXCSUM) != 0) {
|
|
ifp->if_capenable ^= IFCAP_TXCSUM;
|
|
if ((ifp->if_capenable & IFCAP_TXCSUM) != 0)
|
|
ifp->if_hwassist |= VGE_CSUM_FEATURES;
|
|
else
|
|
ifp->if_hwassist &= ~VGE_CSUM_FEATURES;
|
|
}
|
|
if ((mask & IFCAP_RXCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_RXCSUM) != 0)
|
|
ifp->if_capenable ^= IFCAP_RXCSUM;
|
|
if ((mask & IFCAP_WOL_UCAST) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL_UCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_UCAST;
|
|
if ((mask & IFCAP_WOL_MCAST) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL_MCAST) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MCAST;
|
|
if ((mask & IFCAP_WOL_MAGIC) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_WOL_MAGIC) != 0)
|
|
ifp->if_capenable ^= IFCAP_WOL_MAGIC;
|
|
if ((mask & IFCAP_VLAN_HWCSUM) != 0 &&
|
|
(ifp->if_capabilities & IFCAP_VLAN_HWCSUM) != 0)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWCSUM;
|
|
if ((mask & IFCAP_VLAN_HWTAGGING) != 0 &&
|
|
(IFCAP_VLAN_HWTAGGING & ifp->if_capabilities) != 0) {
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
vge_setvlan(sc);
|
|
}
|
|
VGE_UNLOCK(sc);
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
default:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
vge_watchdog(void *arg)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct ifnet *ifp;
|
|
|
|
sc = arg;
|
|
VGE_LOCK_ASSERT(sc);
|
|
vge_stats_update(sc);
|
|
callout_reset(&sc->vge_watchdog, hz, vge_watchdog, sc);
|
|
if (sc->vge_timer == 0 || --sc->vge_timer > 0)
|
|
return;
|
|
|
|
ifp = sc->vge_ifp;
|
|
if_printf(ifp, "watchdog timeout\n");
|
|
ifp->if_oerrors++;
|
|
|
|
vge_txeof(sc);
|
|
vge_rxeof(sc, VGE_RX_DESC_CNT);
|
|
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vge_init_locked(sc);
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void
|
|
vge_stop(struct vge_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
ifp = sc->vge_ifp;
|
|
sc->vge_timer = 0;
|
|
callout_stop(&sc->vge_watchdog);
|
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_GMSK);
|
|
CSR_WRITE_1(sc, VGE_CRS0, VGE_CR0_STOP);
|
|
CSR_WRITE_4(sc, VGE_ISR, 0xFFFFFFFF);
|
|
CSR_WRITE_2(sc, VGE_TXQCSRC, 0xFFFF);
|
|
CSR_WRITE_1(sc, VGE_RXQCSRC, 0xFF);
|
|
CSR_WRITE_4(sc, VGE_RXDESC_ADDR_LO, 0);
|
|
|
|
vge_stats_update(sc);
|
|
VGE_CHAIN_RESET(sc);
|
|
vge_txeof(sc);
|
|
vge_freebufs(sc);
|
|
}
|
|
|
|
/*
|
|
* Device suspend routine. Stop the interface and save some PCI
|
|
* settings in case the BIOS doesn't restore them properly on
|
|
* resume.
|
|
*/
|
|
static int
|
|
vge_suspend(device_t dev)
|
|
{
|
|
struct vge_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
VGE_LOCK(sc);
|
|
vge_stop(sc);
|
|
vge_setwol(sc);
|
|
sc->vge_flags |= VGE_FLAG_SUSPENDED;
|
|
VGE_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Device resume routine. Restore some PCI settings in case the BIOS
|
|
* doesn't, re-enable busmastering, and restart the interface if
|
|
* appropriate.
|
|
*/
|
|
static int
|
|
vge_resume(device_t dev)
|
|
{
|
|
struct vge_softc *sc;
|
|
struct ifnet *ifp;
|
|
uint16_t pmstat;
|
|
|
|
sc = device_get_softc(dev);
|
|
VGE_LOCK(sc);
|
|
if ((sc->vge_flags & VGE_FLAG_PMCAP) != 0) {
|
|
/* Disable PME and clear PME status. */
|
|
pmstat = pci_read_config(sc->vge_dev,
|
|
sc->vge_pmcap + PCIR_POWER_STATUS, 2);
|
|
if ((pmstat & PCIM_PSTAT_PMEENABLE) != 0) {
|
|
pmstat &= ~PCIM_PSTAT_PMEENABLE;
|
|
pci_write_config(sc->vge_dev,
|
|
sc->vge_pmcap + PCIR_POWER_STATUS, pmstat, 2);
|
|
}
|
|
}
|
|
vge_clrwol(sc);
|
|
/* Restart MII auto-polling. */
|
|
vge_miipoll_start(sc);
|
|
ifp = sc->vge_ifp;
|
|
/* Reinitialize interface if necessary. */
|
|
if ((ifp->if_flags & IFF_UP) != 0) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
vge_init_locked(sc);
|
|
}
|
|
sc->vge_flags &= ~VGE_FLAG_SUSPENDED;
|
|
VGE_UNLOCK(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static int
|
|
vge_shutdown(device_t dev)
|
|
{
|
|
|
|
return (vge_suspend(dev));
|
|
}
|
|
|
|
#define VGE_SYSCTL_STAT_ADD32(c, h, n, p, d) \
|
|
SYSCTL_ADD_UINT(c, h, OID_AUTO, n, CTLFLAG_RD, p, 0, d)
|
|
|
|
static void
|
|
vge_sysctl_node(struct vge_softc *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *child, *parent;
|
|
struct sysctl_oid *tree;
|
|
struct vge_hw_stats *stats;
|
|
|
|
stats = &sc->vge_stats;
|
|
ctx = device_get_sysctl_ctx(sc->vge_dev);
|
|
child = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->vge_dev));
|
|
|
|
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "int_holdoff",
|
|
CTLFLAG_RW, &sc->vge_int_holdoff, 0, "interrupt holdoff");
|
|
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "rx_coal_pkt",
|
|
CTLFLAG_RW, &sc->vge_rx_coal_pkt, 0, "rx coalescing packet");
|
|
SYSCTL_ADD_INT(ctx, child, OID_AUTO, "tx_coal_pkt",
|
|
CTLFLAG_RW, &sc->vge_tx_coal_pkt, 0, "tx coalescing packet");
|
|
|
|
/* Pull in device tunables. */
|
|
sc->vge_int_holdoff = VGE_INT_HOLDOFF_DEFAULT;
|
|
resource_int_value(device_get_name(sc->vge_dev),
|
|
device_get_unit(sc->vge_dev), "int_holdoff", &sc->vge_int_holdoff);
|
|
sc->vge_rx_coal_pkt = VGE_RX_COAL_PKT_DEFAULT;
|
|
resource_int_value(device_get_name(sc->vge_dev),
|
|
device_get_unit(sc->vge_dev), "rx_coal_pkt", &sc->vge_rx_coal_pkt);
|
|
sc->vge_tx_coal_pkt = VGE_TX_COAL_PKT_DEFAULT;
|
|
resource_int_value(device_get_name(sc->vge_dev),
|
|
device_get_unit(sc->vge_dev), "tx_coal_pkt", &sc->vge_tx_coal_pkt);
|
|
|
|
tree = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "stats", CTLFLAG_RD,
|
|
NULL, "VGE statistics");
|
|
parent = SYSCTL_CHILDREN(tree);
|
|
|
|
/* Rx statistics. */
|
|
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "rx", CTLFLAG_RD,
|
|
NULL, "RX MAC statistics");
|
|
child = SYSCTL_CHILDREN(tree);
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames",
|
|
&stats->rx_frames, "frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "good_frames",
|
|
&stats->rx_good_frames, "Good frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "fifo_oflows",
|
|
&stats->rx_fifo_oflows, "FIFO overflows");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "runts",
|
|
&stats->rx_runts, "Too short frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "runts_errs",
|
|
&stats->rx_runts_errs, "Too short frames with errors");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_64",
|
|
&stats->rx_pkts_64, "64 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_65_127",
|
|
&stats->rx_pkts_65_127, "65 to 127 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_128_255",
|
|
&stats->rx_pkts_128_255, "128 to 255 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_256_511",
|
|
&stats->rx_pkts_256_511, "256 to 511 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_512_1023",
|
|
&stats->rx_pkts_512_1023, "512 to 1023 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_1024_1518",
|
|
&stats->rx_pkts_1024_1518, "1024 to 1518 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_1519_max",
|
|
&stats->rx_pkts_1519_max, "1519 to max frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_1519_max_errs",
|
|
&stats->rx_pkts_1519_max_errs, "1519 to max frames with error");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_jumbo",
|
|
&stats->rx_jumbos, "Jumbo frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "crcerrs",
|
|
&stats->rx_crcerrs, "CRC errors");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "pause_frames",
|
|
&stats->rx_pause_frames, "CRC errors");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "align_errs",
|
|
&stats->rx_alignerrs, "Alignment errors");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "nobufs",
|
|
&stats->rx_nobufs, "Frames with no buffer event");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "sym_errs",
|
|
&stats->rx_symerrs, "Frames with symbol errors");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "len_errs",
|
|
&stats->rx_lenerrs, "Frames with length mismatched");
|
|
|
|
/* Tx statistics. */
|
|
tree = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO, "tx", CTLFLAG_RD,
|
|
NULL, "TX MAC statistics");
|
|
child = SYSCTL_CHILDREN(tree);
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "good_frames",
|
|
&stats->tx_good_frames, "Good frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_64",
|
|
&stats->tx_pkts_64, "64 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_65_127",
|
|
&stats->tx_pkts_65_127, "65 to 127 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_128_255",
|
|
&stats->tx_pkts_128_255, "128 to 255 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_256_511",
|
|
&stats->tx_pkts_256_511, "256 to 511 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_512_1023",
|
|
&stats->tx_pkts_512_1023, "512 to 1023 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_1024_1518",
|
|
&stats->tx_pkts_1024_1518, "1024 to 1518 bytes frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "frames_jumbo",
|
|
&stats->tx_jumbos, "Jumbo frames");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "colls",
|
|
&stats->tx_colls, "Collisions");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "late_colls",
|
|
&stats->tx_latecolls, "Late collisions");
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "pause_frames",
|
|
&stats->tx_pause, "Pause frames");
|
|
#ifdef VGE_ENABLE_SQEERR
|
|
VGE_SYSCTL_STAT_ADD32(ctx, child, "sqeerrs",
|
|
&stats->tx_sqeerrs, "SQE errors");
|
|
#endif
|
|
/* Clear MAC statistics. */
|
|
vge_stats_clear(sc);
|
|
}
|
|
|
|
#undef VGE_SYSCTL_STAT_ADD32
|
|
|
|
static void
|
|
vge_stats_clear(struct vge_softc *sc)
|
|
{
|
|
int i;
|
|
|
|
CSR_WRITE_1(sc, VGE_MIBCSR,
|
|
CSR_READ_1(sc, VGE_MIBCSR) | VGE_MIBCSR_FREEZE);
|
|
CSR_WRITE_1(sc, VGE_MIBCSR,
|
|
CSR_READ_1(sc, VGE_MIBCSR) | VGE_MIBCSR_CLR);
|
|
for (i = VGE_TIMEOUT; i > 0; i--) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VGE_MIBCSR) & VGE_MIBCSR_CLR) == 0)
|
|
break;
|
|
}
|
|
if (i == 0)
|
|
device_printf(sc->vge_dev, "MIB clear timed out!\n");
|
|
CSR_WRITE_1(sc, VGE_MIBCSR, CSR_READ_1(sc, VGE_MIBCSR) &
|
|
~VGE_MIBCSR_FREEZE);
|
|
}
|
|
|
|
static void
|
|
vge_stats_update(struct vge_softc *sc)
|
|
{
|
|
struct vge_hw_stats *stats;
|
|
struct ifnet *ifp;
|
|
uint32_t mib[VGE_MIB_CNT], val;
|
|
int i;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
stats = &sc->vge_stats;
|
|
ifp = sc->vge_ifp;
|
|
|
|
CSR_WRITE_1(sc, VGE_MIBCSR,
|
|
CSR_READ_1(sc, VGE_MIBCSR) | VGE_MIBCSR_FLUSH);
|
|
for (i = VGE_TIMEOUT; i > 0; i--) {
|
|
DELAY(1);
|
|
if ((CSR_READ_1(sc, VGE_MIBCSR) & VGE_MIBCSR_FLUSH) == 0)
|
|
break;
|
|
}
|
|
if (i == 0) {
|
|
device_printf(sc->vge_dev, "MIB counter dump timed out!\n");
|
|
vge_stats_clear(sc);
|
|
return;
|
|
}
|
|
|
|
bzero(mib, sizeof(mib));
|
|
reset_idx:
|
|
/* Set MIB read index to 0. */
|
|
CSR_WRITE_1(sc, VGE_MIBCSR,
|
|
CSR_READ_1(sc, VGE_MIBCSR) | VGE_MIBCSR_RINI);
|
|
for (i = 0; i < VGE_MIB_CNT; i++) {
|
|
val = CSR_READ_4(sc, VGE_MIBDATA);
|
|
if (i != VGE_MIB_DATA_IDX(val)) {
|
|
/* Reading interrupted. */
|
|
goto reset_idx;
|
|
}
|
|
mib[i] = val & VGE_MIB_DATA_MASK;
|
|
}
|
|
|
|
/* Rx stats. */
|
|
stats->rx_frames += mib[VGE_MIB_RX_FRAMES];
|
|
stats->rx_good_frames += mib[VGE_MIB_RX_GOOD_FRAMES];
|
|
stats->rx_fifo_oflows += mib[VGE_MIB_RX_FIFO_OVERRUNS];
|
|
stats->rx_runts += mib[VGE_MIB_RX_RUNTS];
|
|
stats->rx_runts_errs += mib[VGE_MIB_RX_RUNTS_ERRS];
|
|
stats->rx_pkts_64 += mib[VGE_MIB_RX_PKTS_64];
|
|
stats->rx_pkts_65_127 += mib[VGE_MIB_RX_PKTS_65_127];
|
|
stats->rx_pkts_128_255 += mib[VGE_MIB_RX_PKTS_128_255];
|
|
stats->rx_pkts_256_511 += mib[VGE_MIB_RX_PKTS_256_511];
|
|
stats->rx_pkts_512_1023 += mib[VGE_MIB_RX_PKTS_512_1023];
|
|
stats->rx_pkts_1024_1518 += mib[VGE_MIB_RX_PKTS_1024_1518];
|
|
stats->rx_pkts_1519_max += mib[VGE_MIB_RX_PKTS_1519_MAX];
|
|
stats->rx_pkts_1519_max_errs += mib[VGE_MIB_RX_PKTS_1519_MAX_ERRS];
|
|
stats->rx_jumbos += mib[VGE_MIB_RX_JUMBOS];
|
|
stats->rx_crcerrs += mib[VGE_MIB_RX_CRCERRS];
|
|
stats->rx_pause_frames += mib[VGE_MIB_RX_PAUSE];
|
|
stats->rx_alignerrs += mib[VGE_MIB_RX_ALIGNERRS];
|
|
stats->rx_nobufs += mib[VGE_MIB_RX_NOBUFS];
|
|
stats->rx_symerrs += mib[VGE_MIB_RX_SYMERRS];
|
|
stats->rx_lenerrs += mib[VGE_MIB_RX_LENERRS];
|
|
|
|
/* Tx stats. */
|
|
stats->tx_good_frames += mib[VGE_MIB_TX_GOOD_FRAMES];
|
|
stats->tx_pkts_64 += mib[VGE_MIB_TX_PKTS_64];
|
|
stats->tx_pkts_65_127 += mib[VGE_MIB_TX_PKTS_65_127];
|
|
stats->tx_pkts_128_255 += mib[VGE_MIB_TX_PKTS_128_255];
|
|
stats->tx_pkts_256_511 += mib[VGE_MIB_TX_PKTS_256_511];
|
|
stats->tx_pkts_512_1023 += mib[VGE_MIB_TX_PKTS_512_1023];
|
|
stats->tx_pkts_1024_1518 += mib[VGE_MIB_TX_PKTS_1024_1518];
|
|
stats->tx_jumbos += mib[VGE_MIB_TX_JUMBOS];
|
|
stats->tx_colls += mib[VGE_MIB_TX_COLLS];
|
|
stats->tx_pause += mib[VGE_MIB_TX_PAUSE];
|
|
#ifdef VGE_ENABLE_SQEERR
|
|
stats->tx_sqeerrs += mib[VGE_MIB_TX_SQEERRS];
|
|
#endif
|
|
stats->tx_latecolls += mib[VGE_MIB_TX_LATECOLLS];
|
|
|
|
/* Update counters in ifnet. */
|
|
ifp->if_opackets += mib[VGE_MIB_TX_GOOD_FRAMES];
|
|
|
|
ifp->if_collisions += mib[VGE_MIB_TX_COLLS] +
|
|
mib[VGE_MIB_TX_LATECOLLS];
|
|
|
|
ifp->if_oerrors += mib[VGE_MIB_TX_COLLS] +
|
|
mib[VGE_MIB_TX_LATECOLLS];
|
|
|
|
ifp->if_ipackets += mib[VGE_MIB_RX_GOOD_FRAMES];
|
|
|
|
ifp->if_ierrors += mib[VGE_MIB_RX_FIFO_OVERRUNS] +
|
|
mib[VGE_MIB_RX_RUNTS] +
|
|
mib[VGE_MIB_RX_RUNTS_ERRS] +
|
|
mib[VGE_MIB_RX_CRCERRS] +
|
|
mib[VGE_MIB_RX_ALIGNERRS] +
|
|
mib[VGE_MIB_RX_NOBUFS] +
|
|
mib[VGE_MIB_RX_SYMERRS] +
|
|
mib[VGE_MIB_RX_LENERRS];
|
|
}
|
|
|
|
static void
|
|
vge_intr_holdoff(struct vge_softc *sc)
|
|
{
|
|
uint8_t intctl;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
/*
|
|
* Set Tx interrupt supression threshold.
|
|
* It's possible to use single-shot timer in VGE_CRS1 register
|
|
* in Tx path such that driver can remove most of Tx completion
|
|
* interrupts. However this requires additional access to
|
|
* VGE_CRS1 register to reload the timer in addintion to
|
|
* activating Tx kick command. Another downside is we don't know
|
|
* what single-shot timer value should be used in advance so
|
|
* reclaiming transmitted mbufs could be delayed a lot which in
|
|
* turn slows down Tx operation.
|
|
*/
|
|
CSR_WRITE_1(sc, VGE_CAMCTL, VGE_PAGESEL_TXSUPPTHR);
|
|
CSR_WRITE_1(sc, VGE_TXSUPPTHR, sc->vge_tx_coal_pkt);
|
|
|
|
/* Set Rx interrupt suppresion threshold. */
|
|
CSR_WRITE_1(sc, VGE_CAMCTL, VGE_PAGESEL_RXSUPPTHR);
|
|
CSR_WRITE_1(sc, VGE_RXSUPPTHR, sc->vge_rx_coal_pkt);
|
|
|
|
intctl = CSR_READ_1(sc, VGE_INTCTL1);
|
|
intctl &= ~VGE_INTCTL_SC_RELOAD;
|
|
intctl |= VGE_INTCTL_HC_RELOAD;
|
|
if (sc->vge_tx_coal_pkt <= 0)
|
|
intctl |= VGE_INTCTL_TXINTSUP_DISABLE;
|
|
else
|
|
intctl &= ~VGE_INTCTL_TXINTSUP_DISABLE;
|
|
if (sc->vge_rx_coal_pkt <= 0)
|
|
intctl |= VGE_INTCTL_RXINTSUP_DISABLE;
|
|
else
|
|
intctl &= ~VGE_INTCTL_RXINTSUP_DISABLE;
|
|
CSR_WRITE_1(sc, VGE_INTCTL1, intctl);
|
|
CSR_WRITE_1(sc, VGE_CRC3, VGE_CR3_INT_HOLDOFF);
|
|
if (sc->vge_int_holdoff > 0) {
|
|
/* Set interrupt holdoff timer. */
|
|
CSR_WRITE_1(sc, VGE_CAMCTL, VGE_PAGESEL_INTHLDOFF);
|
|
CSR_WRITE_1(sc, VGE_INTHOLDOFF,
|
|
VGE_INT_HOLDOFF_USEC(sc->vge_int_holdoff));
|
|
/* Enable holdoff timer. */
|
|
CSR_WRITE_1(sc, VGE_CRS3, VGE_CR3_INT_HOLDOFF);
|
|
}
|
|
}
|
|
|
|
static void
|
|
vge_setlinkspeed(struct vge_softc *sc)
|
|
{
|
|
struct mii_data *mii;
|
|
int aneg, i;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
mii = device_get_softc(sc->vge_miibus);
|
|
mii_pollstat(mii);
|
|
aneg = 0;
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
|
|
(IFM_ACTIVE | IFM_AVALID)) {
|
|
switch IFM_SUBTYPE(mii->mii_media_active) {
|
|
case IFM_10_T:
|
|
case IFM_100_TX:
|
|
return;
|
|
case IFM_1000_T:
|
|
aneg++;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
/* Clear forced MAC speed/duplex configuration. */
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_FDXFORCE);
|
|
vge_miibus_writereg(sc->vge_dev, sc->vge_phyaddr, MII_100T2CR, 0);
|
|
vge_miibus_writereg(sc->vge_dev, sc->vge_phyaddr, MII_ANAR,
|
|
ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10 | ANAR_CSMA);
|
|
vge_miibus_writereg(sc->vge_dev, sc->vge_phyaddr, MII_BMCR,
|
|
BMCR_AUTOEN | BMCR_STARTNEG);
|
|
DELAY(1000);
|
|
if (aneg != 0) {
|
|
/* Poll link state until vge(4) get a 10/100 link. */
|
|
for (i = 0; i < MII_ANEGTICKS_GIGE; i++) {
|
|
mii_pollstat(mii);
|
|
if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID))
|
|
== (IFM_ACTIVE | IFM_AVALID)) {
|
|
switch (IFM_SUBTYPE(mii->mii_media_active)) {
|
|
case IFM_10_T:
|
|
case IFM_100_TX:
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
VGE_UNLOCK(sc);
|
|
pause("vgelnk", hz);
|
|
VGE_LOCK(sc);
|
|
}
|
|
if (i == MII_ANEGTICKS_GIGE)
|
|
device_printf(sc->vge_dev, "establishing link failed, "
|
|
"WOL may not work!");
|
|
}
|
|
/*
|
|
* No link, force MAC to have 100Mbps, full-duplex link.
|
|
* This is the last resort and may/may not work.
|
|
*/
|
|
mii->mii_media_status = IFM_AVALID | IFM_ACTIVE;
|
|
mii->mii_media_active = IFM_ETHER | IFM_100_TX | IFM_FDX;
|
|
}
|
|
|
|
static void
|
|
vge_setwol(struct vge_softc *sc)
|
|
{
|
|
struct ifnet *ifp;
|
|
uint16_t pmstat;
|
|
uint8_t val;
|
|
|
|
VGE_LOCK_ASSERT(sc);
|
|
|
|
if ((sc->vge_flags & VGE_FLAG_PMCAP) == 0) {
|
|
/* No PME capability, PHY power down. */
|
|
vge_miibus_writereg(sc->vge_dev, sc->vge_phyaddr, MII_BMCR,
|
|
BMCR_PDOWN);
|
|
vge_miipoll_stop(sc);
|
|
return;
|
|
}
|
|
|
|
ifp = sc->vge_ifp;
|
|
|
|
/* Clear WOL on pattern match. */
|
|
CSR_WRITE_1(sc, VGE_WOLCR0C, VGE_WOLCR0_PATTERN_ALL);
|
|
/* Disable WOL on magic/unicast packet. */
|
|
CSR_WRITE_1(sc, VGE_WOLCR1C, 0x0F);
|
|
CSR_WRITE_1(sc, VGE_WOLCFGC, VGE_WOLCFG_SAB | VGE_WOLCFG_SAM |
|
|
VGE_WOLCFG_PMEOVR);
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0) {
|
|
vge_setlinkspeed(sc);
|
|
val = 0;
|
|
if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0)
|
|
val |= VGE_WOLCR1_UCAST;
|
|
if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
|
|
val |= VGE_WOLCR1_MAGIC;
|
|
CSR_WRITE_1(sc, VGE_WOLCR1S, val);
|
|
val = 0;
|
|
if ((ifp->if_capenable & IFCAP_WOL_MCAST) != 0)
|
|
val |= VGE_WOLCFG_SAM | VGE_WOLCFG_SAB;
|
|
CSR_WRITE_1(sc, VGE_WOLCFGS, val | VGE_WOLCFG_PMEOVR);
|
|
/* Disable MII auto-polling. */
|
|
vge_miipoll_stop(sc);
|
|
}
|
|
CSR_SETBIT_1(sc, VGE_DIAGCTL,
|
|
VGE_DIAGCTL_MACFORCE | VGE_DIAGCTL_FDXFORCE);
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_GMII);
|
|
|
|
/* Clear WOL status on pattern match. */
|
|
CSR_WRITE_1(sc, VGE_WOLSR0C, 0xFF);
|
|
CSR_WRITE_1(sc, VGE_WOLSR1C, 0xFF);
|
|
|
|
val = CSR_READ_1(sc, VGE_PWRSTAT);
|
|
val |= VGE_STICKHW_SWPTAG;
|
|
CSR_WRITE_1(sc, VGE_PWRSTAT, val);
|
|
/* Put hardware into sleep. */
|
|
val = CSR_READ_1(sc, VGE_PWRSTAT);
|
|
val |= VGE_STICKHW_DS0 | VGE_STICKHW_DS1;
|
|
CSR_WRITE_1(sc, VGE_PWRSTAT, val);
|
|
/* Request PME if WOL is requested. */
|
|
pmstat = pci_read_config(sc->vge_dev, sc->vge_pmcap +
|
|
PCIR_POWER_STATUS, 2);
|
|
pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
|
|
if ((ifp->if_capenable & IFCAP_WOL) != 0)
|
|
pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
|
|
pci_write_config(sc->vge_dev, sc->vge_pmcap + PCIR_POWER_STATUS,
|
|
pmstat, 2);
|
|
}
|
|
|
|
static void
|
|
vge_clrwol(struct vge_softc *sc)
|
|
{
|
|
uint8_t val;
|
|
|
|
val = CSR_READ_1(sc, VGE_PWRSTAT);
|
|
val &= ~VGE_STICKHW_SWPTAG;
|
|
CSR_WRITE_1(sc, VGE_PWRSTAT, val);
|
|
/* Disable WOL and clear power state indicator. */
|
|
val = CSR_READ_1(sc, VGE_PWRSTAT);
|
|
val &= ~(VGE_STICKHW_DS0 | VGE_STICKHW_DS1);
|
|
CSR_WRITE_1(sc, VGE_PWRSTAT, val);
|
|
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_GMII);
|
|
CSR_CLRBIT_1(sc, VGE_DIAGCTL, VGE_DIAGCTL_MACFORCE);
|
|
|
|
/* Clear WOL on pattern match. */
|
|
CSR_WRITE_1(sc, VGE_WOLCR0C, VGE_WOLCR0_PATTERN_ALL);
|
|
/* Disable WOL on magic/unicast packet. */
|
|
CSR_WRITE_1(sc, VGE_WOLCR1C, 0x0F);
|
|
CSR_WRITE_1(sc, VGE_WOLCFGC, VGE_WOLCFG_SAB | VGE_WOLCFG_SAM |
|
|
VGE_WOLCFG_PMEOVR);
|
|
/* Clear WOL status on pattern match. */
|
|
CSR_WRITE_1(sc, VGE_WOLSR0C, 0xFF);
|
|
CSR_WRITE_1(sc, VGE_WOLSR1C, 0xFF);
|
|
}
|