freebsd-dev/sys/i386/linux/linux_machdep.c
Dmitry Chagin 81338031c4 Switch linuxulator to use the native 1:1 threads.
The reasons:
1. Get rid of the stubs/quirks with process dethreading,
   process reparent when the process group leader exits and close
   to this problems on wait(), waitpid(), etc.
2. Reuse our kernel code instead of writing excessive thread
   managment routines in Linuxulator.

Implementation details:

1. The thread is created via kern_thr_new() in the clone() call with
   the CLONE_THREAD parameter. Thus, everything else is a process.
2. The test that the process has a threads is done via P_HADTHREADS
   bit p_flag of struct proc.
3. Per thread emulator state data structure is now located in the
   struct thread and freed in the thread_dtor() hook.
   Mandatory holdig of the p_mtx required when referencing emuldata
   from the other threads.
4. PID mangling has changed. Now Linux pid is the native tid
   and Linux tgid is the native pid, with the exception of the first
   thread in the process where tid and pid are one and the same.

Ugliness:

   In case when the Linux thread is the initial thread in the thread
   group thread id is equal to the process id. Glibc depends on this
   magic (assert in pthread_getattr_np.c). So for system calls that
   take thread id as a parameter we should use the special method
   to reference struct thread.

Differential Revision:	https://reviews.freebsd.org/D1039
2015-05-24 14:53:16 +00:00

1081 lines
26 KiB
C

/*-
* Copyright (c) 2000 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/capsicum.h>
#include <sys/file.h>
#include <sys/fcntl.h>
#include <sys/imgact.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mman.h>
#include <sys/mutex.h>
#include <sys/sx.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/queue.h>
#include <sys/resource.h>
#include <sys/resourcevar.h>
#include <sys/signalvar.h>
#include <sys/syscallsubr.h>
#include <sys/sysproto.h>
#include <sys/unistd.h>
#include <sys/wait.h>
#include <sys/sched.h>
#include <machine/frame.h>
#include <machine/psl.h>
#include <machine/segments.h>
#include <machine/sysarch.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <i386/linux/linux.h>
#include <i386/linux/linux_proto.h>
#include <compat/linux/linux_ipc.h>
#include <compat/linux/linux_misc.h>
#include <compat/linux/linux_signal.h>
#include <compat/linux/linux_util.h>
#include <compat/linux/linux_emul.h>
#include <i386/include/pcb.h> /* needed for pcb definition in linux_set_thread_area */
#include "opt_posix.h"
extern struct sysentvec elf32_freebsd_sysvec; /* defined in i386/i386/elf_machdep.c */
struct l_descriptor {
l_uint entry_number;
l_ulong base_addr;
l_uint limit;
l_uint seg_32bit:1;
l_uint contents:2;
l_uint read_exec_only:1;
l_uint limit_in_pages:1;
l_uint seg_not_present:1;
l_uint useable:1;
};
struct l_old_select_argv {
l_int nfds;
l_fd_set *readfds;
l_fd_set *writefds;
l_fd_set *exceptfds;
struct l_timeval *timeout;
};
static int linux_mmap_common(struct thread *td, l_uintptr_t addr,
l_size_t len, l_int prot, l_int flags, l_int fd,
l_loff_t pos);
int
linux_to_bsd_sigaltstack(int lsa)
{
int bsa = 0;
if (lsa & LINUX_SS_DISABLE)
bsa |= SS_DISABLE;
if (lsa & LINUX_SS_ONSTACK)
bsa |= SS_ONSTACK;
return (bsa);
}
int
bsd_to_linux_sigaltstack(int bsa)
{
int lsa = 0;
if (bsa & SS_DISABLE)
lsa |= LINUX_SS_DISABLE;
if (bsa & SS_ONSTACK)
lsa |= LINUX_SS_ONSTACK;
return (lsa);
}
int
linux_execve(struct thread *td, struct linux_execve_args *args)
{
struct image_args eargs;
struct vmspace *oldvmspace;
char *newpath;
int error;
LCONVPATHEXIST(td, args->path, &newpath);
#ifdef DEBUG
if (ldebug(execve))
printf(ARGS(execve, "%s"), newpath);
#endif
error = pre_execve(td, &oldvmspace);
if (error != 0) {
free(newpath, M_TEMP);
return (error);
}
error = exec_copyin_args(&eargs, newpath, UIO_SYSSPACE,
args->argp, args->envp);
free(newpath, M_TEMP);
if (error == 0)
error = kern_execve(td, &eargs, NULL);
if (error == 0)
error = linux_common_execve(td, &eargs);
post_execve(td, error, oldvmspace);
return (error);
}
struct l_ipc_kludge {
struct l_msgbuf *msgp;
l_long msgtyp;
};
int
linux_ipc(struct thread *td, struct linux_ipc_args *args)
{
switch (args->what & 0xFFFF) {
case LINUX_SEMOP: {
struct linux_semop_args a;
a.semid = args->arg1;
a.tsops = args->ptr;
a.nsops = args->arg2;
return (linux_semop(td, &a));
}
case LINUX_SEMGET: {
struct linux_semget_args a;
a.key = args->arg1;
a.nsems = args->arg2;
a.semflg = args->arg3;
return (linux_semget(td, &a));
}
case LINUX_SEMCTL: {
struct linux_semctl_args a;
int error;
a.semid = args->arg1;
a.semnum = args->arg2;
a.cmd = args->arg3;
error = copyin(args->ptr, &a.arg, sizeof(a.arg));
if (error)
return (error);
return (linux_semctl(td, &a));
}
case LINUX_MSGSND: {
struct linux_msgsnd_args a;
a.msqid = args->arg1;
a.msgp = args->ptr;
a.msgsz = args->arg2;
a.msgflg = args->arg3;
return (linux_msgsnd(td, &a));
}
case LINUX_MSGRCV: {
struct linux_msgrcv_args a;
a.msqid = args->arg1;
a.msgsz = args->arg2;
a.msgflg = args->arg3;
if ((args->what >> 16) == 0) {
struct l_ipc_kludge tmp;
int error;
if (args->ptr == NULL)
return (EINVAL);
error = copyin(args->ptr, &tmp, sizeof(tmp));
if (error)
return (error);
a.msgp = tmp.msgp;
a.msgtyp = tmp.msgtyp;
} else {
a.msgp = args->ptr;
a.msgtyp = args->arg5;
}
return (linux_msgrcv(td, &a));
}
case LINUX_MSGGET: {
struct linux_msgget_args a;
a.key = args->arg1;
a.msgflg = args->arg2;
return (linux_msgget(td, &a));
}
case LINUX_MSGCTL: {
struct linux_msgctl_args a;
a.msqid = args->arg1;
a.cmd = args->arg2;
a.buf = args->ptr;
return (linux_msgctl(td, &a));
}
case LINUX_SHMAT: {
struct linux_shmat_args a;
a.shmid = args->arg1;
a.shmaddr = args->ptr;
a.shmflg = args->arg2;
a.raddr = (l_ulong *)args->arg3;
return (linux_shmat(td, &a));
}
case LINUX_SHMDT: {
struct linux_shmdt_args a;
a.shmaddr = args->ptr;
return (linux_shmdt(td, &a));
}
case LINUX_SHMGET: {
struct linux_shmget_args a;
a.key = args->arg1;
a.size = args->arg2;
a.shmflg = args->arg3;
return (linux_shmget(td, &a));
}
case LINUX_SHMCTL: {
struct linux_shmctl_args a;
a.shmid = args->arg1;
a.cmd = args->arg2;
a.buf = args->ptr;
return (linux_shmctl(td, &a));
}
default:
break;
}
return (EINVAL);
}
int
linux_old_select(struct thread *td, struct linux_old_select_args *args)
{
struct l_old_select_argv linux_args;
struct linux_select_args newsel;
int error;
#ifdef DEBUG
if (ldebug(old_select))
printf(ARGS(old_select, "%p"), args->ptr);
#endif
error = copyin(args->ptr, &linux_args, sizeof(linux_args));
if (error)
return (error);
newsel.nfds = linux_args.nfds;
newsel.readfds = linux_args.readfds;
newsel.writefds = linux_args.writefds;
newsel.exceptfds = linux_args.exceptfds;
newsel.timeout = linux_args.timeout;
return (linux_select(td, &newsel));
}
int
linux_set_cloned_tls(struct thread *td, void *desc)
{
struct segment_descriptor sd;
struct l_user_desc info;
int idx, error;
int a[2];
error = copyin(desc, &info, sizeof(struct l_user_desc));
if (error) {
printf(LMSG("copyin failed!"));
} else {
idx = info.entry_number;
/*
* looks like we're getting the idx we returned
* in the set_thread_area() syscall
*/
if (idx != 6 && idx != 3) {
printf(LMSG("resetting idx!"));
idx = 3;
}
/* this doesnt happen in practice */
if (idx == 6) {
/* we might copy out the entry_number as 3 */
info.entry_number = 3;
error = copyout(&info, desc, sizeof(struct l_user_desc));
if (error)
printf(LMSG("copyout failed!"));
}
a[0] = LINUX_LDT_entry_a(&info);
a[1] = LINUX_LDT_entry_b(&info);
memcpy(&sd, &a, sizeof(a));
#ifdef DEBUG
if (ldebug(clone))
printf("Segment created in clone with "
"CLONE_SETTLS: lobase: %x, hibase: %x, "
"lolimit: %x, hilimit: %x, type: %i, "
"dpl: %i, p: %i, xx: %i, def32: %i, "
"gran: %i\n", sd.sd_lobase, sd.sd_hibase,
sd.sd_lolimit, sd.sd_hilimit, sd.sd_type,
sd.sd_dpl, sd.sd_p, sd.sd_xx,
sd.sd_def32, sd.sd_gran);
#endif
/* set %gs */
td->td_pcb->pcb_gsd = sd;
td->td_pcb->pcb_gs = GSEL(GUGS_SEL, SEL_UPL);
}
return (error);
}
int
linux_set_upcall_kse(struct thread *td, register_t stack)
{
if (stack)
td->td_frame->tf_esp = stack;
/*
* The newly created Linux thread returns
* to the user space by the same path that a parent do.
*/
td->td_frame->tf_eax = 0;
return (0);
}
#define STACK_SIZE (2 * 1024 * 1024)
#define GUARD_SIZE (4 * PAGE_SIZE)
int
linux_mmap2(struct thread *td, struct linux_mmap2_args *args)
{
#ifdef DEBUG
if (ldebug(mmap2))
printf(ARGS(mmap2, "%p, %d, %d, 0x%08x, %d, %d"),
(void *)args->addr, args->len, args->prot,
args->flags, args->fd, args->pgoff);
#endif
return (linux_mmap_common(td, args->addr, args->len, args->prot,
args->flags, args->fd, (uint64_t)(uint32_t)args->pgoff *
PAGE_SIZE));
}
int
linux_mmap(struct thread *td, struct linux_mmap_args *args)
{
int error;
struct l_mmap_argv linux_args;
error = copyin(args->ptr, &linux_args, sizeof(linux_args));
if (error)
return (error);
#ifdef DEBUG
if (ldebug(mmap))
printf(ARGS(mmap, "%p, %d, %d, 0x%08x, %d, %d"),
(void *)linux_args.addr, linux_args.len, linux_args.prot,
linux_args.flags, linux_args.fd, linux_args.pgoff);
#endif
return (linux_mmap_common(td, linux_args.addr, linux_args.len,
linux_args.prot, linux_args.flags, linux_args.fd,
(uint32_t)linux_args.pgoff));
}
static int
linux_mmap_common(struct thread *td, l_uintptr_t addr, l_size_t len, l_int prot,
l_int flags, l_int fd, l_loff_t pos)
{
struct proc *p = td->td_proc;
struct mmap_args /* {
caddr_t addr;
size_t len;
int prot;
int flags;
int fd;
long pad;
off_t pos;
} */ bsd_args;
int error;
struct file *fp;
cap_rights_t rights;
error = 0;
bsd_args.flags = 0;
fp = NULL;
/*
* Linux mmap(2):
* You must specify exactly one of MAP_SHARED and MAP_PRIVATE
*/
if (!((flags & LINUX_MAP_SHARED) ^ (flags & LINUX_MAP_PRIVATE)))
return (EINVAL);
if (flags & LINUX_MAP_SHARED)
bsd_args.flags |= MAP_SHARED;
if (flags & LINUX_MAP_PRIVATE)
bsd_args.flags |= MAP_PRIVATE;
if (flags & LINUX_MAP_FIXED)
bsd_args.flags |= MAP_FIXED;
if (flags & LINUX_MAP_ANON) {
/* Enforce pos to be on page boundary, then ignore. */
if ((pos & PAGE_MASK) != 0)
return (EINVAL);
pos = 0;
bsd_args.flags |= MAP_ANON;
} else
bsd_args.flags |= MAP_NOSYNC;
if (flags & LINUX_MAP_GROWSDOWN)
bsd_args.flags |= MAP_STACK;
/*
* PROT_READ, PROT_WRITE, or PROT_EXEC implies PROT_READ and PROT_EXEC
* on Linux/i386. We do this to ensure maximum compatibility.
* Linux/ia64 does the same in i386 emulation mode.
*/
bsd_args.prot = prot;
if (bsd_args.prot & (PROT_READ | PROT_WRITE | PROT_EXEC))
bsd_args.prot |= PROT_READ | PROT_EXEC;
/* Linux does not check file descriptor when MAP_ANONYMOUS is set. */
bsd_args.fd = (bsd_args.flags & MAP_ANON) ? -1 : fd;
if (bsd_args.fd != -1) {
/*
* Linux follows Solaris mmap(2) description:
* The file descriptor fildes is opened with
* read permission, regardless of the
* protection options specified.
*
* Checking just CAP_MMAP is fine here, since the real work
* is done in the FreeBSD mmap().
*/
error = fget(td, bsd_args.fd,
cap_rights_init(&rights, CAP_MMAP), &fp);
if (error != 0)
return (error);
if (fp->f_type != DTYPE_VNODE) {
fdrop(fp, td);
return (EINVAL);
}
/* Linux mmap() just fails for O_WRONLY files */
if (!(fp->f_flag & FREAD)) {
fdrop(fp, td);
return (EACCES);
}
fdrop(fp, td);
}
if (flags & LINUX_MAP_GROWSDOWN) {
/*
* The Linux MAP_GROWSDOWN option does not limit auto
* growth of the region. Linux mmap with this option
* takes as addr the inital BOS, and as len, the initial
* region size. It can then grow down from addr without
* limit. However, linux threads has an implicit internal
* limit to stack size of STACK_SIZE. Its just not
* enforced explicitly in linux. But, here we impose
* a limit of (STACK_SIZE - GUARD_SIZE) on the stack
* region, since we can do this with our mmap.
*
* Our mmap with MAP_STACK takes addr as the maximum
* downsize limit on BOS, and as len the max size of
* the region. It them maps the top SGROWSIZ bytes,
* and auto grows the region down, up to the limit
* in addr.
*
* If we don't use the MAP_STACK option, the effect
* of this code is to allocate a stack region of a
* fixed size of (STACK_SIZE - GUARD_SIZE).
*/
if ((caddr_t)PTRIN(addr) + len > p->p_vmspace->vm_maxsaddr) {
/*
* Some linux apps will attempt to mmap
* thread stacks near the top of their
* address space. If their TOS is greater
* than vm_maxsaddr, vm_map_growstack()
* will confuse the thread stack with the
* process stack and deliver a SEGV if they
* attempt to grow the thread stack past their
* current stacksize rlimit. To avoid this,
* adjust vm_maxsaddr upwards to reflect
* the current stacksize rlimit rather
* than the maximum possible stacksize.
* It would be better to adjust the
* mmap'ed region, but some apps do not check
* mmap's return value.
*/
PROC_LOCK(p);
p->p_vmspace->vm_maxsaddr = (char *)USRSTACK -
lim_cur(p, RLIMIT_STACK);
PROC_UNLOCK(p);
}
/*
* This gives us our maximum stack size and a new BOS.
* If we're using VM_STACK, then mmap will just map
* the top SGROWSIZ bytes, and let the stack grow down
* to the limit at BOS. If we're not using VM_STACK
* we map the full stack, since we don't have a way
* to autogrow it.
*/
if (len > STACK_SIZE - GUARD_SIZE) {
bsd_args.addr = (caddr_t)PTRIN(addr);
bsd_args.len = len;
} else {
bsd_args.addr = (caddr_t)PTRIN(addr) -
(STACK_SIZE - GUARD_SIZE - len);
bsd_args.len = STACK_SIZE - GUARD_SIZE;
}
} else {
bsd_args.addr = (caddr_t)PTRIN(addr);
bsd_args.len = len;
}
bsd_args.pos = pos;
#ifdef DEBUG
if (ldebug(mmap))
printf("-> %s(%p, %d, %d, 0x%08x, %d, 0x%x)\n",
__func__,
(void *)bsd_args.addr, bsd_args.len, bsd_args.prot,
bsd_args.flags, bsd_args.fd, (int)bsd_args.pos);
#endif
error = sys_mmap(td, &bsd_args);
#ifdef DEBUG
if (ldebug(mmap))
printf("-> %s() return: 0x%x (0x%08x)\n",
__func__, error, (u_int)td->td_retval[0]);
#endif
return (error);
}
int
linux_mprotect(struct thread *td, struct linux_mprotect_args *uap)
{
struct mprotect_args bsd_args;
bsd_args.addr = uap->addr;
bsd_args.len = uap->len;
bsd_args.prot = uap->prot;
if (bsd_args.prot & (PROT_READ | PROT_WRITE | PROT_EXEC))
bsd_args.prot |= PROT_READ | PROT_EXEC;
return (sys_mprotect(td, &bsd_args));
}
int
linux_ioperm(struct thread *td, struct linux_ioperm_args *args)
{
int error;
struct i386_ioperm_args iia;
iia.start = args->start;
iia.length = args->length;
iia.enable = args->enable;
error = i386_set_ioperm(td, &iia);
return (error);
}
int
linux_iopl(struct thread *td, struct linux_iopl_args *args)
{
int error;
if (args->level < 0 || args->level > 3)
return (EINVAL);
if ((error = priv_check(td, PRIV_IO)) != 0)
return (error);
if ((error = securelevel_gt(td->td_ucred, 0)) != 0)
return (error);
td->td_frame->tf_eflags = (td->td_frame->tf_eflags & ~PSL_IOPL) |
(args->level * (PSL_IOPL / 3));
return (0);
}
int
linux_modify_ldt(struct thread *td, struct linux_modify_ldt_args *uap)
{
int error;
struct i386_ldt_args ldt;
struct l_descriptor ld;
union descriptor desc;
int size, written;
switch (uap->func) {
case 0x00: /* read_ldt */
ldt.start = 0;
ldt.descs = uap->ptr;
ldt.num = uap->bytecount / sizeof(union descriptor);
error = i386_get_ldt(td, &ldt);
td->td_retval[0] *= sizeof(union descriptor);
break;
case 0x02: /* read_default_ldt = 0 */
size = 5*sizeof(struct l_desc_struct);
if (size > uap->bytecount)
size = uap->bytecount;
for (written = error = 0; written < size && error == 0; written++)
error = subyte((char *)uap->ptr + written, 0);
td->td_retval[0] = written;
break;
case 0x01: /* write_ldt */
case 0x11: /* write_ldt */
if (uap->bytecount != sizeof(ld))
return (EINVAL);
error = copyin(uap->ptr, &ld, sizeof(ld));
if (error)
return (error);
ldt.start = ld.entry_number;
ldt.descs = &desc;
ldt.num = 1;
desc.sd.sd_lolimit = (ld.limit & 0x0000ffff);
desc.sd.sd_hilimit = (ld.limit & 0x000f0000) >> 16;
desc.sd.sd_lobase = (ld.base_addr & 0x00ffffff);
desc.sd.sd_hibase = (ld.base_addr & 0xff000000) >> 24;
desc.sd.sd_type = SDT_MEMRO | ((ld.read_exec_only ^ 1) << 1) |
(ld.contents << 2);
desc.sd.sd_dpl = 3;
desc.sd.sd_p = (ld.seg_not_present ^ 1);
desc.sd.sd_xx = 0;
desc.sd.sd_def32 = ld.seg_32bit;
desc.sd.sd_gran = ld.limit_in_pages;
error = i386_set_ldt(td, &ldt, &desc);
break;
default:
error = ENOSYS;
break;
}
if (error == EOPNOTSUPP) {
printf("linux: modify_ldt needs kernel option USER_LDT\n");
error = ENOSYS;
}
return (error);
}
int
linux_sigaction(struct thread *td, struct linux_sigaction_args *args)
{
l_osigaction_t osa;
l_sigaction_t act, oact;
int error;
#ifdef DEBUG
if (ldebug(sigaction))
printf(ARGS(sigaction, "%d, %p, %p"),
args->sig, (void *)args->nsa, (void *)args->osa);
#endif
if (args->nsa != NULL) {
error = copyin(args->nsa, &osa, sizeof(l_osigaction_t));
if (error)
return (error);
act.lsa_handler = osa.lsa_handler;
act.lsa_flags = osa.lsa_flags;
act.lsa_restorer = osa.lsa_restorer;
LINUX_SIGEMPTYSET(act.lsa_mask);
act.lsa_mask.__bits[0] = osa.lsa_mask;
}
error = linux_do_sigaction(td, args->sig, args->nsa ? &act : NULL,
args->osa ? &oact : NULL);
if (args->osa != NULL && !error) {
osa.lsa_handler = oact.lsa_handler;
osa.lsa_flags = oact.lsa_flags;
osa.lsa_restorer = oact.lsa_restorer;
osa.lsa_mask = oact.lsa_mask.__bits[0];
error = copyout(&osa, args->osa, sizeof(l_osigaction_t));
}
return (error);
}
/*
* Linux has two extra args, restart and oldmask. We dont use these,
* but it seems that "restart" is actually a context pointer that
* enables the signal to happen with a different register set.
*/
int
linux_sigsuspend(struct thread *td, struct linux_sigsuspend_args *args)
{
sigset_t sigmask;
l_sigset_t mask;
#ifdef DEBUG
if (ldebug(sigsuspend))
printf(ARGS(sigsuspend, "%08lx"), (unsigned long)args->mask);
#endif
LINUX_SIGEMPTYSET(mask);
mask.__bits[0] = args->mask;
linux_to_bsd_sigset(&mask, &sigmask);
return (kern_sigsuspend(td, sigmask));
}
int
linux_rt_sigsuspend(struct thread *td, struct linux_rt_sigsuspend_args *uap)
{
l_sigset_t lmask;
sigset_t sigmask;
int error;
#ifdef DEBUG
if (ldebug(rt_sigsuspend))
printf(ARGS(rt_sigsuspend, "%p, %d"),
(void *)uap->newset, uap->sigsetsize);
#endif
if (uap->sigsetsize != sizeof(l_sigset_t))
return (EINVAL);
error = copyin(uap->newset, &lmask, sizeof(l_sigset_t));
if (error)
return (error);
linux_to_bsd_sigset(&lmask, &sigmask);
return (kern_sigsuspend(td, sigmask));
}
int
linux_pause(struct thread *td, struct linux_pause_args *args)
{
struct proc *p = td->td_proc;
sigset_t sigmask;
#ifdef DEBUG
if (ldebug(pause))
printf(ARGS(pause, ""));
#endif
PROC_LOCK(p);
sigmask = td->td_sigmask;
PROC_UNLOCK(p);
return (kern_sigsuspend(td, sigmask));
}
int
linux_sigaltstack(struct thread *td, struct linux_sigaltstack_args *uap)
{
stack_t ss, oss;
l_stack_t lss;
int error;
#ifdef DEBUG
if (ldebug(sigaltstack))
printf(ARGS(sigaltstack, "%p, %p"), uap->uss, uap->uoss);
#endif
if (uap->uss != NULL) {
error = copyin(uap->uss, &lss, sizeof(l_stack_t));
if (error)
return (error);
ss.ss_sp = lss.ss_sp;
ss.ss_size = lss.ss_size;
ss.ss_flags = linux_to_bsd_sigaltstack(lss.ss_flags);
}
error = kern_sigaltstack(td, (uap->uss != NULL) ? &ss : NULL,
(uap->uoss != NULL) ? &oss : NULL);
if (!error && uap->uoss != NULL) {
lss.ss_sp = oss.ss_sp;
lss.ss_size = oss.ss_size;
lss.ss_flags = bsd_to_linux_sigaltstack(oss.ss_flags);
error = copyout(&lss, uap->uoss, sizeof(l_stack_t));
}
return (error);
}
int
linux_ftruncate64(struct thread *td, struct linux_ftruncate64_args *args)
{
struct ftruncate_args sa;
#ifdef DEBUG
if (ldebug(ftruncate64))
printf(ARGS(ftruncate64, "%u, %jd"), args->fd,
(intmax_t)args->length);
#endif
sa.fd = args->fd;
sa.length = args->length;
return sys_ftruncate(td, &sa);
}
int
linux_set_thread_area(struct thread *td, struct linux_set_thread_area_args *args)
{
struct l_user_desc info;
int error;
int idx;
int a[2];
struct segment_descriptor sd;
error = copyin(args->desc, &info, sizeof(struct l_user_desc));
if (error)
return (error);
#ifdef DEBUG
if (ldebug(set_thread_area))
printf(ARGS(set_thread_area, "%i, %x, %x, %i, %i, %i, %i, %i, %i\n"),
info.entry_number,
info.base_addr,
info.limit,
info.seg_32bit,
info.contents,
info.read_exec_only,
info.limit_in_pages,
info.seg_not_present,
info.useable);
#endif
idx = info.entry_number;
/*
* Semantics of linux version: every thread in the system has array of
* 3 tls descriptors. 1st is GLIBC TLS, 2nd is WINE, 3rd unknown. This
* syscall loads one of the selected tls decriptors with a value and
* also loads GDT descriptors 6, 7 and 8 with the content of the
* per-thread descriptors.
*
* Semantics of fbsd version: I think we can ignore that linux has 3
* per-thread descriptors and use just the 1st one. The tls_array[]
* is used only in set/get-thread_area() syscalls and for loading the
* GDT descriptors. In fbsd we use just one GDT descriptor for TLS so
* we will load just one.
*
* XXX: this doesn't work when a user space process tries to use more
* than 1 TLS segment. Comment in the linux sources says wine might do
* this.
*/
/*
* we support just GLIBC TLS now
* we should let 3 proceed as well because we use this segment so
* if code does two subsequent calls it should succeed
*/
if (idx != 6 && idx != -1 && idx != 3)
return (EINVAL);
/*
* we have to copy out the GDT entry we use
* FreeBSD uses GDT entry #3 for storing %gs so load that
*
* XXX: what if a user space program doesn't check this value and tries
* to use 6, 7 or 8?
*/
idx = info.entry_number = 3;
error = copyout(&info, args->desc, sizeof(struct l_user_desc));
if (error)
return (error);
if (LINUX_LDT_empty(&info)) {
a[0] = 0;
a[1] = 0;
} else {
a[0] = LINUX_LDT_entry_a(&info);
a[1] = LINUX_LDT_entry_b(&info);
}
memcpy(&sd, &a, sizeof(a));
#ifdef DEBUG
if (ldebug(set_thread_area))
printf("Segment created in set_thread_area: lobase: %x, hibase: %x, lolimit: %x, hilimit: %x, type: %i, dpl: %i, p: %i, xx: %i, def32: %i, gran: %i\n", sd.sd_lobase,
sd.sd_hibase,
sd.sd_lolimit,
sd.sd_hilimit,
sd.sd_type,
sd.sd_dpl,
sd.sd_p,
sd.sd_xx,
sd.sd_def32,
sd.sd_gran);
#endif
/* this is taken from i386 version of cpu_set_user_tls() */
critical_enter();
/* set %gs */
td->td_pcb->pcb_gsd = sd;
PCPU_GET(fsgs_gdt)[1] = sd;
load_gs(GSEL(GUGS_SEL, SEL_UPL));
critical_exit();
return (0);
}
int
linux_get_thread_area(struct thread *td, struct linux_get_thread_area_args *args)
{
struct l_user_desc info;
int error;
int idx;
struct l_desc_struct desc;
struct segment_descriptor sd;
#ifdef DEBUG
if (ldebug(get_thread_area))
printf(ARGS(get_thread_area, "%p"), args->desc);
#endif
error = copyin(args->desc, &info, sizeof(struct l_user_desc));
if (error)
return (error);
idx = info.entry_number;
/* XXX: I am not sure if we want 3 to be allowed too. */
if (idx != 6 && idx != 3)
return (EINVAL);
idx = 3;
memset(&info, 0, sizeof(info));
sd = PCPU_GET(fsgs_gdt)[1];
memcpy(&desc, &sd, sizeof(desc));
info.entry_number = idx;
info.base_addr = LINUX_GET_BASE(&desc);
info.limit = LINUX_GET_LIMIT(&desc);
info.seg_32bit = LINUX_GET_32BIT(&desc);
info.contents = LINUX_GET_CONTENTS(&desc);
info.read_exec_only = !LINUX_GET_WRITABLE(&desc);
info.limit_in_pages = LINUX_GET_LIMIT_PAGES(&desc);
info.seg_not_present = !LINUX_GET_PRESENT(&desc);
info.useable = LINUX_GET_USEABLE(&desc);
error = copyout(&info, args->desc, sizeof(struct l_user_desc));
if (error)
return (EFAULT);
return (0);
}
/* XXX: this wont work with module - convert it */
int
linux_mq_open(struct thread *td, struct linux_mq_open_args *args)
{
#ifdef P1003_1B_MQUEUE
return sys_kmq_open(td, (struct kmq_open_args *) args);
#else
return (ENOSYS);
#endif
}
int
linux_mq_unlink(struct thread *td, struct linux_mq_unlink_args *args)
{
#ifdef P1003_1B_MQUEUE
return sys_kmq_unlink(td, (struct kmq_unlink_args *) args);
#else
return (ENOSYS);
#endif
}
int
linux_mq_timedsend(struct thread *td, struct linux_mq_timedsend_args *args)
{
#ifdef P1003_1B_MQUEUE
return sys_kmq_timedsend(td, (struct kmq_timedsend_args *) args);
#else
return (ENOSYS);
#endif
}
int
linux_mq_timedreceive(struct thread *td, struct linux_mq_timedreceive_args *args)
{
#ifdef P1003_1B_MQUEUE
return sys_kmq_timedreceive(td, (struct kmq_timedreceive_args *) args);
#else
return (ENOSYS);
#endif
}
int
linux_mq_notify(struct thread *td, struct linux_mq_notify_args *args)
{
#ifdef P1003_1B_MQUEUE
return sys_kmq_notify(td, (struct kmq_notify_args *) args);
#else
return (ENOSYS);
#endif
}
int
linux_mq_getsetattr(struct thread *td, struct linux_mq_getsetattr_args *args)
{
#ifdef P1003_1B_MQUEUE
return sys_kmq_setattr(td, (struct kmq_setattr_args *) args);
#else
return (ENOSYS);
#endif
}
int
linux_wait4(struct thread *td, struct linux_wait4_args *args)
{
int error, options;
struct rusage ru, *rup;
#ifdef DEBUG
if (ldebug(wait4))
printf(ARGS(wait4, "%d, %p, %d, %p"),
args->pid, (void *)args->status, args->options,
(void *)args->rusage);
#endif
options = (args->options & (WNOHANG | WUNTRACED));
/* WLINUXCLONE should be equal to __WCLONE, but we make sure */
if (args->options & __WCLONE)
options |= WLINUXCLONE;
if (args->rusage != NULL)
rup = &ru;
else
rup = NULL;
error = linux_common_wait(td, args->pid, args->status, options, rup);
if (error)
return (error);
if (args->rusage != NULL)
error = copyout(&ru, args->rusage, sizeof(ru));
return (error);
}