freebsd-dev/contrib/libpcap/sockutils.c
Hans Petter Selasky b00ab7548b MFV r333789: libpcap 1.9.0 (pre-release)
MFC after:	1 month
Sponsored by:	Mellanox Technologies
2018-05-28 08:12:18 +00:00

1490 lines
49 KiB
C

/*
* Copyright (c) 2002 - 2003
* NetGroup, Politecnico di Torino (Italy)
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Politecnico di Torino nor the names of its
* contributors may be used to endorse or promote products derived from
* this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
/*
* \file sockutils.c
*
* The goal of this file is to provide a common set of primitives for socket
* manipulation.
*
* Although the socket interface defined in the RFC 2553 (and its updates)
* is excellent, there are still differences between the behavior of those
* routines on UN*X and Windows, and between UN*Xes.
*
* These calls provide an interface similar to the socket interface, but
* that hides the differences between operating systems. It does not
* attempt to significantly improve on the socket interface in other
* ways.
*/
#include "ftmacros.h"
#include <string.h>
#include <errno.h> /* for the errno variable */
#include <stdio.h> /* for the stderr file */
#include <stdlib.h> /* for malloc() and free() */
#ifdef HAVE_LIMITS_H
#include <limits.h>
#else
#define INT_MAX 2147483647
#endif
#include "pcap-int.h"
#include "sockutils.h"
#include "portability.h"
#ifdef _WIN32
/*
* Winsock initialization.
*
* Ask for WinSock 2.2.
*/
#define WINSOCK_MAJOR_VERSION 2
#define WINSOCK_MINOR_VERSION 2
static int sockcount = 0; /*!< Variable that allows calling the WSAStartup() only one time */
#endif
/* Some minor differences between UNIX and Win32 */
#ifdef _WIN32
#define SHUT_WR SD_SEND /* The control code for shutdown() is different in Win32 */
#endif
/* Size of the buffer that has to keep error messages */
#define SOCK_ERRBUF_SIZE 1024
/* Constants; used in order to keep strings here */
#define SOCKET_NO_NAME_AVAILABLE "No name available"
#define SOCKET_NO_PORT_AVAILABLE "No port available"
#define SOCKET_NAME_NULL_DAD "Null address (possibly DAD Phase)"
/*
* On UN*X, send() and recv() return ssize_t.
*
* On Windows, send() and recv() return an int.
*
* Wth MSVC, there *is* no ssize_t.
*
* With MinGW, there is an ssize_t type; it is either an int (32 bit)
* or a long long (64 bit).
*
* So, on Windows, if we don't have ssize_t defined, define it as an
* int, so we can use it, on all platforms, as the type of variables
* that hold the return values from send() and recv().
*/
#if defined(_WIN32) && !defined(_SSIZE_T_DEFINED)
typedef int ssize_t;
#endif
/****************************************************
* *
* Locally defined functions *
* *
****************************************************/
static int sock_ismcastaddr(const struct sockaddr *saddr);
/****************************************************
* *
* Function bodies *
* *
****************************************************/
/*
* Format an error message given an errno value (UN*X) or a WinSock error
* (Windows).
*/
void sock_fmterror(const char *caller, int errcode, char *errbuf, int errbuflen)
{
#ifdef _WIN32
int retval;
TCHAR message[SOCK_ERRBUF_SIZE]; /* It will be char (if we're using ascii) or wchar_t (if we're using unicode) */
if (errbuf == NULL)
return;
retval = FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS |
FORMAT_MESSAGE_MAX_WIDTH_MASK,
NULL, errcode, MAKELANGID(LANG_NEUTRAL, SUBLANG_DEFAULT),
message, sizeof(message) / sizeof(TCHAR), NULL);
if (retval == 0)
{
if ((caller) && (*caller))
pcap_snprintf(errbuf, errbuflen, "%sUnable to get the exact error message", caller);
else
pcap_snprintf(errbuf, errbuflen, "Unable to get the exact error message");
}
else
{
if ((caller) && (*caller))
pcap_snprintf(errbuf, errbuflen, "%s%s (code %d)", caller, message, errcode);
else
pcap_snprintf(errbuf, errbuflen, "%s (code %d)", message, errcode);
}
#else
char *message;
if (errbuf == NULL)
return;
message = strerror(errcode);
if ((caller) && (*caller))
pcap_snprintf(errbuf, errbuflen, "%s%s (code %d)", caller, message, errcode);
else
pcap_snprintf(errbuf, errbuflen, "%s (code %d)", message, errcode);
#endif
}
/*
* \brief It retrieves the error message after an error occurred in the socket interface.
*
* This function is defined because of the different way errors are returned in UNIX
* and Win32. This function provides a consistent way to retrieve the error message
* (after a socket error occurred) on all the platforms.
*
* \param caller: a pointer to a user-allocated string which contains a message that has
* to be printed *before* the true error message. It could be, for example, 'this error
* comes from the recv() call at line 31'. It may be NULL.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return No return values. The error message is returned in the 'string' parameter.
*/
void sock_geterror(const char *caller, char *errbuf, int errbuflen)
{
#ifdef _WIN32
if (errbuf == NULL)
return;
sock_fmterror(caller, GetLastError(), errbuf, errbuflen);
#else
if (errbuf == NULL)
return;
sock_fmterror(caller, errno, errbuf, errbuflen);
#endif
}
/*
* \brief It initializes sockets.
*
* This function is pretty useless on UNIX, since socket initialization is not required.
* However it is required on Win32. In UNIX, this function appears to be completely empty.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
* in the 'errbuf' variable.
*/
#ifdef _WIN32
int sock_init(char *errbuf, int errbuflen)
{
if (sockcount == 0)
{
WSADATA wsaData; /* helper variable needed to initialize Winsock */
if (WSAStartup(MAKEWORD(WINSOCK_MAJOR_VERSION,
WINSOCK_MINOR_VERSION), &wsaData) != 0)
{
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "Failed to initialize Winsock\n");
WSACleanup();
return -1;
}
}
sockcount++;
#else
int sock_init(char *errbuf _U_, int errbuflen _U_)
{
#endif
return 0;
}
/*
* \brief It deallocates sockets.
*
* This function is pretty useless on UNIX, since socket deallocation is not required.
* However it is required on Win32. In UNIX, this function appears to be completely empty.
*
* \return No error values.
*/
void sock_cleanup(void)
{
#ifdef _WIN32
sockcount--;
if (sockcount == 0)
WSACleanup();
#endif
}
/*
* \brief It checks if the sockaddr variable contains a multicast address.
*
* \return '0' if the address is multicast, '-1' if it is not.
*/
static int sock_ismcastaddr(const struct sockaddr *saddr)
{
if (saddr->sa_family == PF_INET)
{
struct sockaddr_in *saddr4 = (struct sockaddr_in *) saddr;
if (IN_MULTICAST(ntohl(saddr4->sin_addr.s_addr))) return 0;
else return -1;
}
else
{
struct sockaddr_in6 *saddr6 = (struct sockaddr_in6 *) saddr;
if (IN6_IS_ADDR_MULTICAST(&saddr6->sin6_addr)) return 0;
else return -1;
}
}
/*
* \brief It initializes a network connection both from the client and the server side.
*
* In case of a client socket, this function calls socket() and connect().
* In the meanwhile, it checks for any socket error.
* If an error occurs, it writes the error message into 'errbuf'.
*
* In case of a server socket, the function calls socket(), bind() and listen().
*
* This function is usually preceeded by the sock_initaddress().
*
* \param addrinfo: pointer to an addrinfo variable which will be used to
* open the socket and such. This variable is the one returned by the previous call to
* sock_initaddress().
*
* \param server: '1' if this is a server socket, '0' otherwise.
*
* \param nconn: number of the connections that are allowed to wait into the listen() call.
* This value has no meanings in case of a client socket.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return the socket that has been opened (that has to be used in the following sockets calls)
* if everything is fine, INVALID_SOCKET if some errors occurred. The error message is returned
* in the 'errbuf' variable.
*/
SOCKET sock_open(struct addrinfo *addrinfo, int server, int nconn, char *errbuf, int errbuflen)
{
SOCKET sock;
#if defined(SO_NOSIGPIPE) || defined(IPV6_V6ONLY) || defined(IPV6_BINDV6ONLY)
int on = 1;
#endif
sock = socket(addrinfo->ai_family, addrinfo->ai_socktype, addrinfo->ai_protocol);
if (sock == INVALID_SOCKET)
{
sock_geterror("socket(): ", errbuf, errbuflen);
return INVALID_SOCKET;
}
/*
* Disable SIGPIPE, if we have SO_NOSIGPIPE. We don't want to
* have to deal with signals if the peer closes the connection,
* especially in client programs, which may not even be aware that
* they're sending to sockets.
*/
#ifdef SO_NOSIGPIPE
if (setsockopt(sock, SOL_SOCKET, SO_NOSIGPIPE, (char *)&on,
sizeof (int)) == -1)
{
sock_geterror("setsockopt(SO_NOSIGPIPE)", errbuf, errbuflen);
closesocket(sock);
return INVALID_SOCKET;
}
#endif
/* This is a server socket */
if (server)
{
#if defined(IPV6_V6ONLY) || defined(IPV6_BINDV6ONLY)
/*
* Force the use of IPv6-only addresses.
*
* RFC 3493 indicates that you can support IPv4 on an
* IPv6 socket:
*
* https://tools.ietf.org/html/rfc3493#section-3.7
*
* and that this is the default behavior. This means
* that if we first create an IPv6 socket bound to the
* "any" address, it is, in effect, also bound to the
* IPv4 "any" address, so when we create an IPv4 socket
* and try to bind it to the IPv4 "any" address, it gets
* EADDRINUSE.
*
* Not all network stacks support IPv4 on IPv6 sockets;
* pre-NT 6 Windows stacks don't support it, and the
* OpenBSD stack doesn't support it for security reasons
* (see the OpenBSD inet6(4) man page). Therefore, we
* don't want to rely on this behavior.
*
* So we try to disable it, using either the IPV6_V6ONLY
* option from RFC 3493:
*
* https://tools.ietf.org/html/rfc3493#section-5.3
*
* or the IPV6_BINDV6ONLY option from older UN*Xes.
*/
#ifndef IPV6_V6ONLY
/* For older systems */
#define IPV6_V6ONLY IPV6_BINDV6ONLY
#endif /* IPV6_V6ONLY */
if (addrinfo->ai_family == PF_INET6)
{
if (setsockopt(sock, IPPROTO_IPV6, IPV6_V6ONLY,
(char *)&on, sizeof (int)) == -1)
{
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "setsockopt(IPV6_V6ONLY)");
closesocket(sock);
return INVALID_SOCKET;
}
}
#endif /* defined(IPV6_V6ONLY) || defined(IPV6_BINDV6ONLY) */
/* WARNING: if the address is a mcast one, I should place the proper Win32 code here */
if (bind(sock, addrinfo->ai_addr, (int) addrinfo->ai_addrlen) != 0)
{
sock_geterror("bind(): ", errbuf, errbuflen);
closesocket(sock);
return INVALID_SOCKET;
}
if (addrinfo->ai_socktype == SOCK_STREAM)
if (listen(sock, nconn) == -1)
{
sock_geterror("listen(): ", errbuf, errbuflen);
closesocket(sock);
return INVALID_SOCKET;
}
/* server side ended */
return sock;
}
else /* we're the client */
{
struct addrinfo *tempaddrinfo;
char *errbufptr;
size_t bufspaceleft;
tempaddrinfo = addrinfo;
errbufptr = errbuf;
bufspaceleft = errbuflen;
*errbufptr = 0;
/*
* We have to loop though all the addinfo returned.
* For instance, we can have both IPv6 and IPv4 addresses, but the service we're trying
* to connect to is unavailable in IPv6, so we have to try in IPv4 as well
*/
while (tempaddrinfo)
{
if (connect(sock, tempaddrinfo->ai_addr, (int) tempaddrinfo->ai_addrlen) == -1)
{
size_t msglen;
char TmpBuffer[100];
char SocketErrorMessage[SOCK_ERRBUF_SIZE];
/*
* We have to retrieve the error message before any other socket call completes, otherwise
* the error message is lost
*/
sock_geterror(NULL, SocketErrorMessage, sizeof(SocketErrorMessage));
/* Returns the numeric address of the host that triggered the error */
sock_getascii_addrport((struct sockaddr_storage *) tempaddrinfo->ai_addr, TmpBuffer, sizeof(TmpBuffer), NULL, 0, NI_NUMERICHOST, TmpBuffer, sizeof(TmpBuffer));
pcap_snprintf(errbufptr, bufspaceleft,
"Is the server properly installed on %s? connect() failed: %s", TmpBuffer, SocketErrorMessage);
/* In case more then one 'connect' fails, we manage to keep all the error messages */
msglen = strlen(errbufptr);
errbufptr[msglen] = ' ';
errbufptr[msglen + 1] = 0;
bufspaceleft = bufspaceleft - (msglen + 1);
errbufptr += (msglen + 1);
tempaddrinfo = tempaddrinfo->ai_next;
}
else
break;
}
/*
* Check how we exit from the previous loop
* If tempaddrinfo is equal to NULL, it means that all the connect() failed.
*/
if (tempaddrinfo == NULL)
{
closesocket(sock);
return INVALID_SOCKET;
}
else
return sock;
}
}
/*
* \brief Closes the present (TCP and UDP) socket connection.
*
* This function sends a shutdown() on the socket in order to disable send() calls
* (while recv() ones are still allowed). Then, it closes the socket.
*
* \param sock: the socket identifier of the connection that has to be closed.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
* in the 'errbuf' variable.
*/
int sock_close(SOCKET sock, char *errbuf, int errbuflen)
{
/*
* SHUT_WR: subsequent calls to the send function are disallowed.
* For TCP sockets, a FIN will be sent after all data is sent and
* acknowledged by the Server.
*/
if (shutdown(sock, SHUT_WR))
{
sock_geterror("shutdown(): ", errbuf, errbuflen);
/* close the socket anyway */
closesocket(sock);
return -1;
}
closesocket(sock);
return 0;
}
/*
* \brief Checks that the address, port and flags given are valids and it returns an 'addrinfo' structure.
*
* This function basically calls the getaddrinfo() calls, and it performs a set of sanity checks
* to control that everything is fine (e.g. a TCP socket cannot have a mcast address, and such).
* If an error occurs, it writes the error message into 'errbuf'.
*
* \param host: a pointer to a string identifying the host. It can be
* a host name, a numeric literal address, or NULL or "" (useful
* in case of a server socket which has to bind to all addresses).
*
* \param port: a pointer to a user-allocated buffer containing the network port to use.
*
* \param hints: an addrinfo variable (passed by reference) containing the flags needed to create the
* addrinfo structure appropriately.
*
* \param addrinfo: it represents the true returning value. This is a pointer to an addrinfo variable
* (passed by reference), which will be allocated by this function and returned back to the caller.
* This variable will be used in the next sockets calls.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '0' if everything is fine, '-1' if some errors occurred. The error message is returned
* in the 'errbuf' variable. The addrinfo variable that has to be used in the following sockets calls is
* returned into the addrinfo parameter.
*
* \warning The 'addrinfo' variable has to be deleted by the programmer by calling freeaddrinfo() when
* it is no longer needed.
*
* \warning This function requires the 'hints' variable as parameter. The semantic of this variable is the same
* of the one of the corresponding variable used into the standard getaddrinfo() socket function. We suggest
* the programmer to look at that function in order to set the 'hints' variable appropriately.
*/
int sock_initaddress(const char *host, const char *port,
struct addrinfo *hints, struct addrinfo **addrinfo, char *errbuf, int errbuflen)
{
int retval;
retval = getaddrinfo(host, port, hints, addrinfo);
if (retval != 0)
{
/*
* if the getaddrinfo() fails, you have to use gai_strerror(), instead of using the standard
* error routines (errno) in UNIX; Winsock suggests using the GetLastError() instead.
*/
if (errbuf)
{
#ifdef _WIN32
sock_geterror("getaddrinfo(): ", errbuf, errbuflen);
#else
pcap_snprintf(errbuf, errbuflen, "getaddrinfo() %s", gai_strerror(retval));
#endif
}
return -1;
}
/*
* \warning SOCKET: I should check all the accept() in order to bind to all addresses in case
* addrinfo has more han one pointers
*/
/*
* This software only supports PF_INET and PF_INET6.
*
* XXX - should we just check that at least *one* address is
* either PF_INET or PF_INET6, and, when using the list,
* ignore all addresses that are neither? (What, no IPX
* support? :-))
*/
if (((*addrinfo)->ai_family != PF_INET) &&
((*addrinfo)->ai_family != PF_INET6))
{
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "getaddrinfo(): socket type not supported");
freeaddrinfo(*addrinfo);
*addrinfo = NULL;
return -1;
}
/*
* You can't do multicast (or broadcast) TCP.
*/
if (((*addrinfo)->ai_socktype == SOCK_STREAM) &&
(sock_ismcastaddr((*addrinfo)->ai_addr) == 0))
{
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "getaddrinfo(): multicast addresses are not valid when using TCP streams");
freeaddrinfo(*addrinfo);
*addrinfo = NULL;
return -1;
}
return 0;
}
/*
* \brief It sends the amount of data contained into 'buffer' on the given socket.
*
* This function basically calls the send() socket function and it checks that all
* the data specified in 'buffer' (of size 'size') will be sent. If an error occurs,
* it writes the error message into 'errbuf'.
* In case the socket buffer does not have enough space, it loops until all data
* has been sent.
*
* \param socket: the connected socket currently opened.
*
* \param buffer: a char pointer to a user-allocated buffer in which data is contained.
*
* \param size: number of bytes that have to be sent.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '0' if everything is fine, '-1' if an error other than
* "connection reset" or "peer has closed the receive side" occurred,
* '-2' if we got one of those errors.
* For errors, an error message is returned in the 'errbuf' variable.
*/
int sock_send(SOCKET sock, const char *buffer, size_t size,
char *errbuf, int errbuflen)
{
int remaining;
ssize_t nsent;
if (size > INT_MAX)
{
if (errbuf)
{
pcap_snprintf(errbuf, errbuflen,
"Can't send more than %u bytes with sock_recv",
INT_MAX);
}
return -1;
}
remaining = (int)size;
do {
#ifdef MSG_NOSIGNAL
/*
* Send with MSG_NOSIGNAL, so that we don't get SIGPIPE
* on errors on stream-oriented sockets when the other
* end breaks the connection.
* The EPIPE error is still returned.
*/
nsent = send(sock, buffer, remaining, MSG_NOSIGNAL);
#else
nsent = send(sock, buffer, remaining, 0);
#endif
if (nsent == -1)
{
/*
* If the client closed the connection out from
* under us, there's no need to log that as an
* error.
*/
int errcode;
#ifdef _WIN32
errcode = GetLastError();
if (errcode == WSAECONNRESET ||
errcode == WSAECONNABORTED)
{
/*
* WSAECONNABORTED appears to be the error
* returned in Winsock when you try to send
* on a connection where the peer has closed
* the receive side.
*/
return -2;
}
sock_fmterror("send(): ", errcode, errbuf, errbuflen);
#else
errcode = errno;
if (errcode == ECONNRESET || errcode == EPIPE)
{
/*
* EPIPE is what's returned on UN*X when
* you try to send on a connection when
* the peer has closed the receive side.
*/
return -2;
}
sock_fmterror("send(): ", errcode, errbuf, errbuflen);
#endif
return -1;
}
remaining -= nsent;
buffer += nsent;
} while (remaining != 0);
return 0;
}
/*
* \brief It copies the amount of data contained into 'buffer' into 'tempbuf'.
* and it checks for buffer overflows.
*
* This function basically copies 'size' bytes of data contained into 'buffer'
* into 'tempbuf', starting at offset 'offset'. Before that, it checks that the
* resulting buffer will not be larger than 'totsize'. Finally, it updates
* the 'offset' variable in order to point to the first empty location of the buffer.
*
* In case the function is called with 'checkonly' equal to 1, it does not copy
* the data into the buffer. It only checks for buffer overflows and it updates the
* 'offset' variable. This mode can be useful when the buffer already contains the
* data (maybe because the producer writes directly into the target buffer), so
* only the buffer overflow check has to be made.
* In this case, both 'buffer' and 'tempbuf' can be NULL values.
*
* This function is useful in case the userland application does not know immediately
* all the data it has to write into the socket. This function provides a way to create
* the "stream" step by step, appending the new data to the old one. Then, when all the
* data has been bufferized, the application can call the sock_send() function.
*
* \param buffer: a char pointer to a user-allocated buffer that keeps the data
* that has to be copied.
*
* \param size: number of bytes that have to be copied.
*
* \param tempbuf: user-allocated buffer (of size 'totsize') in which data
* has to be copied.
*
* \param offset: an index into 'tempbuf' which keeps the location of its first
* empty location.
*
* \param totsize: total size of the buffer in which data is being copied.
*
* \param checkonly: '1' if we do not want to copy data into the buffer and we
* want just do a buffer ovreflow control, '0' if data has to be copied as well.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '0' if everything is fine, '-1' if some errors occurred. The error message
* is returned in the 'errbuf' variable. When the function returns, 'tempbuf' will
* have the new string appended, and 'offset' will keep the length of that buffer.
* In case of 'checkonly == 1', data is not copied, but 'offset' is updated in any case.
*
* \warning This function assumes that the buffer in which data has to be stored is
* large 'totbuf' bytes.
*
* \warning In case of 'checkonly', be carefully to call this function *before* copying
* the data into the buffer. Otherwise, the control about the buffer overflow is useless.
*/
int sock_bufferize(const char *buffer, int size, char *tempbuf, int *offset, int totsize, int checkonly, char *errbuf, int errbuflen)
{
if ((*offset + size) > totsize)
{
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "Not enough space in the temporary send buffer.");
return -1;
}
if (!checkonly)
memcpy(tempbuf + (*offset), buffer, size);
(*offset) += size;
return 0;
}
/*
* \brief It waits on a connected socket and it manages to receive data.
*
* This function basically calls the recv() socket function and it checks that no
* error occurred. If that happens, it writes the error message into 'errbuf'.
*
* This function changes its behavior according to the 'receiveall' flag: if we
* want to receive exactly 'size' byte, it loops on the recv() until all the requested
* data is arrived. Otherwise, it returns the data currently available.
*
* In case the socket does not have enough data available, it cycles on the recv()
* until the requested data (of size 'size') is arrived.
* In this case, it blocks until the number of bytes read is equal to 'size'.
*
* \param sock: the connected socket currently opened.
*
* \param buffer: a char pointer to a user-allocated buffer in which data has to be stored
*
* \param size: size of the allocated buffer. WARNING: this indicates the number of bytes
* that we are expecting to be read.
*
* \param flags:
*
* SOCK_RECEIVALL_XXX:
*
* if SOCK_RECEIVEALL_NO, return as soon as some data is ready
* if SOCK_RECEIVALL_YES, wait until 'size' data has been
* received (in case the socket does not have enough data available).
*
* SOCK_EOF_XXX:
*
* if SOCK_EOF_ISNT_ERROR, if the first read returns 0, just return 0,
* and return an error on any subsequent read that returns 0;
* if SOCK_EOF_IS_ERROR, if any read returns 0, return an error.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return the number of bytes read if everything is fine, '-1' if some errors occurred.
* The error message is returned in the 'errbuf' variable.
*/
int sock_recv(SOCKET sock, void *buffer, size_t size, int flags,
char *errbuf, int errbuflen)
{
char *bufp = buffer;
int remaining;
ssize_t nread;
if (size == 0)
{
SOCK_DEBUG_MESSAGE("I have been requested to read zero bytes");
return 0;
}
if (size > INT_MAX)
{
if (errbuf)
{
pcap_snprintf(errbuf, errbuflen,
"Can't read more than %u bytes with sock_recv",
INT_MAX);
}
return -1;
}
bufp = (char *) buffer;
remaining = (int) size;
/*
* We don't use MSG_WAITALL because it's not supported in
* Win32.
*/
for (;;) {
nread = recv(sock, bufp, remaining, 0);
if (nread == -1)
{
#ifndef _WIN32
if (errno == EINTR)
return -3;
#endif
sock_geterror("recv(): ", errbuf, errbuflen);
return -1;
}
if (nread == 0)
{
if ((flags & SOCK_EOF_IS_ERROR) ||
(remaining != (int) size))
{
/*
* Either we've already read some data,
* or we're always supposed to return
* an error on EOF.
*/
if (errbuf)
{
pcap_snprintf(errbuf, errbuflen,
"The other host terminated the connection.");
}
return -1;
}
else
return 0;
}
/*
* Do we want to read the amount requested, or just return
* what we got?
*/
if (!(flags & SOCK_RECEIVEALL_YES))
{
/*
* Just return what we got.
*/
return (int) nread;
}
bufp += nread;
remaining -= nread;
if (remaining == 0)
return (int) size;
}
}
/*
* Receives a datagram from a socket.
*
* Returns the size of the datagram on success or -1 on error.
*/
int sock_recv_dgram(SOCKET sock, void *buffer, size_t size,
char *errbuf, int errbuflen)
{
ssize_t nread;
#ifndef _WIN32
struct msghdr message;
struct iovec iov;
#endif
if (size == 0)
{
SOCK_DEBUG_MESSAGE("I have been requested to read zero bytes");
return 0;
}
if (size > INT_MAX)
{
if (errbuf)
{
pcap_snprintf(errbuf, errbuflen,
"Can't read more than %u bytes with sock_recv_dgram",
INT_MAX);
}
return -1;
}
/*
* This should be a datagram socket, so we should get the
* entire datagram in one recv() or recvmsg() call, and
* don't need to loop.
*/
#ifdef _WIN32
nread = recv(sock, buffer, size, 0);
if (nread == SOCKET_ERROR)
{
/*
* To quote the MSDN documentation for recv(),
* "If the datagram or message is larger than
* the buffer specified, the buffer is filled
* with the first part of the datagram, and recv
* generates the error WSAEMSGSIZE. For unreliable
* protocols (for example, UDP) the excess data is
* lost..."
*
* So if the message is bigger than the buffer
* supplied to us, the excess data is discarded,
* and we'll report an error.
*/
sock_geterror("recv(): ", errbuf, errbuflen);
return -1;
}
#else /* _WIN32 */
/*
* The Single UNIX Specification says that a recv() on
* a socket for a message-oriented protocol will discard
* the excess data. It does *not* indicate that the
* receive will fail with, for example, EMSGSIZE.
*
* Therefore, we use recvmsg(), which appears to be
* the only way to get a "message truncated" indication
* when receiving a message for a message-oriented
* protocol.
*/
message.msg_name = NULL; /* we don't care who it's from */
message.msg_namelen = 0;
iov.iov_base = buffer;
iov.iov_len = size;
message.msg_iov = &iov;
message.msg_iovlen = 1;
#ifdef HAVE_STRUCT_MSGHDR_MSG_CONTROL
message.msg_control = NULL; /* we don't care about control information */
message.msg_controllen = 0;
#endif
#ifdef HAVE_STRUCT_MSGHDR_MSG_FLAGS
message.msg_flags = 0;
#endif
nread = recvmsg(sock, &message, 0);
if (nread == -1)
{
if (errno == EINTR)
return -3;
sock_geterror("recv(): ", errbuf, errbuflen);
return -1;
}
#ifdef HAVE_STRUCT_MSGHDR_MSG_FLAGS
/*
* XXX - Solaris supports this, but only if you ask for the
* X/Open version of recvmsg(); should we use that, or will
* that cause other problems?
*/
if (message.msg_flags & MSG_TRUNC)
{
/*
* Message was bigger than the specified buffer size.
*
* Report this as an error, as the Microsoft documentation
* implies we'd do in a similar case on Windows.
*/
pcap_snprintf(errbuf, errbuflen, "recv(): Message too long");
return -1;
}
#endif /* HAVE_STRUCT_MSGHDR_MSG_FLAGS */
#endif /* _WIN32 */
/*
* The size we're reading fits in an int, so the return value
* will fit in an int.
*/
return (int)nread;
}
/*
* \brief It discards N bytes that are currently waiting to be read on the current socket.
*
* This function is useful in case we receive a message we cannot understand (e.g.
* wrong version number when receiving a network packet), so that we have to discard all
* data before reading a new message.
*
* This function will read 'size' bytes from the socket and discard them.
* It defines an internal buffer in which data will be copied; however, in case
* this buffer is not large enough, it will cycle in order to read everything as well.
*
* \param sock: the connected socket currently opened.
*
* \param size: number of bytes that have to be discarded.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '0' if everything is fine, '-1' if some errors occurred.
* The error message is returned in the 'errbuf' variable.
*/
int sock_discard(SOCKET sock, int size, char *errbuf, int errbuflen)
{
#define TEMP_BUF_SIZE 32768
char buffer[TEMP_BUF_SIZE]; /* network buffer, to be used when the message is discarded */
/*
* A static allocation avoids the need of a 'malloc()' each time we want to discard a message
* Our feeling is that a buffer if 32KB is enough for most of the application;
* in case this is not enough, the "while" loop discards the message by calling the
* sockrecv() several times.
* We do not want to create a bigger variable because this causes the program to exit on
* some platforms (e.g. BSD)
*/
while (size > TEMP_BUF_SIZE)
{
if (sock_recv(sock, buffer, TEMP_BUF_SIZE, SOCK_RECEIVEALL_YES, errbuf, errbuflen) == -1)
return -1;
size -= TEMP_BUF_SIZE;
}
/*
* If there is still data to be discarded
* In this case, the data can fit into the temporary buffer
*/
if (size)
{
if (sock_recv(sock, buffer, size, SOCK_RECEIVEALL_YES, errbuf, errbuflen) == -1)
return -1;
}
SOCK_DEBUG_MESSAGE("I'm currently discarding data\n");
return 0;
}
/*
* \brief Checks that one host (identified by the sockaddr_storage structure) belongs to an 'allowed list'.
*
* This function is useful after an accept() call in order to check if the connecting
* host is allowed to connect to me. To do that, we have a buffer that keeps the list of the
* allowed host; this function checks the sockaddr_storage structure of the connecting host
* against this host list, and it returns '0' is the host is included in this list.
*
* \param hostlist: pointer to a string that contains the list of the allowed host.
*
* \param sep: a string that keeps the separators used between the hosts (for example the
* space character) in the host list.
*
* \param from: a sockaddr_storage structure, as it is returned by the accept() call.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return It returns:
* - '1' if the host list is empty
* - '0' if the host belongs to the host list (and therefore it is allowed to connect)
* - '-1' in case the host does not belong to the host list (and therefore it is not allowed to connect
* - '-2' in case or error. The error message is returned in the 'errbuf' variable.
*/
int sock_check_hostlist(char *hostlist, const char *sep, struct sockaddr_storage *from, char *errbuf, int errbuflen)
{
/* checks if the connecting host is among the ones allowed */
if ((hostlist) && (hostlist[0]))
{
char *token; /* temp, needed to separate items into the hostlist */
struct addrinfo *addrinfo, *ai_next;
char *temphostlist;
char *lasts;
/*
* The problem is that strtok modifies the original variable by putting '0' at the end of each token
* So, we have to create a new temporary string in which the original content is kept
*/
temphostlist = strdup(hostlist);
if (temphostlist == NULL)
{
sock_geterror("sock_check_hostlist(), malloc() failed", errbuf, errbuflen);
return -2;
}
token = pcap_strtok_r(temphostlist, sep, &lasts);
/* it avoids a warning in the compilation ('addrinfo used but not initialized') */
addrinfo = NULL;
while (token != NULL)
{
struct addrinfo hints;
int retval;
addrinfo = NULL;
memset(&hints, 0, sizeof(struct addrinfo));
hints.ai_family = PF_UNSPEC;
hints.ai_socktype = SOCK_STREAM;
retval = getaddrinfo(token, "0", &hints, &addrinfo);
if (retval != 0)
{
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "getaddrinfo() %s", gai_strerror(retval));
SOCK_DEBUG_MESSAGE(errbuf);
/* Get next token */
token = pcap_strtok_r(NULL, sep, &lasts);
continue;
}
/* ai_next is required to preserve the content of addrinfo, in order to deallocate it properly */
ai_next = addrinfo;
while (ai_next)
{
if (sock_cmpaddr(from, (struct sockaddr_storage *) ai_next->ai_addr) == 0)
{
free(temphostlist);
freeaddrinfo(addrinfo);
return 0;
}
/*
* If we are here, it means that the current address does not matches
* Let's try with the next one in the header chain
*/
ai_next = ai_next->ai_next;
}
freeaddrinfo(addrinfo);
addrinfo = NULL;
/* Get next token */
token = pcap_strtok_r(NULL, sep, &lasts);
}
if (addrinfo)
{
freeaddrinfo(addrinfo);
addrinfo = NULL;
}
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "The host is not in the allowed host list. Connection refused.");
free(temphostlist);
return -1;
}
/* No hostlist, so we have to return 'empty list' */
return 1;
}
/*
* \brief Compares two addresses contained into two sockaddr_storage structures.
*
* This function is useful to compare two addresses, given their internal representation,
* i.e. an sockaddr_storage structure.
*
* The two structures do not need to be sockaddr_storage; you can have both 'sockaddr_in' and
* sockaddr_in6, properly acsted in order to be compliant to the function interface.
*
* This function will return '0' if the two addresses matches, '-1' if not.
*
* \param first: a sockaddr_storage structure, (for example the one that is returned by an
* accept() call), containing the first address to compare.
*
* \param second: a sockaddr_storage structure containing the second address to compare.
*
* \return '0' if the addresses are equal, '-1' if they are different.
*/
int sock_cmpaddr(struct sockaddr_storage *first, struct sockaddr_storage *second)
{
if (first->ss_family == second->ss_family)
{
if (first->ss_family == AF_INET)
{
if (memcmp(&(((struct sockaddr_in *) first)->sin_addr),
&(((struct sockaddr_in *) second)->sin_addr),
sizeof(struct in_addr)) == 0)
return 0;
}
else /* address family is AF_INET6 */
{
if (memcmp(&(((struct sockaddr_in6 *) first)->sin6_addr),
&(((struct sockaddr_in6 *) second)->sin6_addr),
sizeof(struct in6_addr)) == 0)
return 0;
}
}
return -1;
}
/*
* \brief It gets the address/port the system picked for this socket (on connected sockets).
*
* It is used to return the address and port the server picked for our socket on the local machine.
* It works only on:
* - connected sockets
* - server sockets
*
* On unconnected client sockets it does not work because the system dynamically chooses a port
* only when the socket calls a send() call.
*
* \param sock: the connected socket currently opened.
*
* \param address: it contains the address that will be returned by the function. This buffer
* must be properly allocated by the user. The address can be either literal or numeric depending
* on the value of 'Flags'.
*
* \param addrlen: the length of the 'address' buffer.
*
* \param port: it contains the port that will be returned by the function. This buffer
* must be properly allocated by the user.
*
* \param portlen: the length of the 'port' buffer.
*
* \param flags: a set of flags (the ones defined into the getnameinfo() standard socket function)
* that determine if the resulting address must be in numeric / literal form, and so on.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return It returns '-1' if this function succeeds, '0' otherwise.
* The address and port corresponding are returned back in the buffers 'address' and 'port'.
* In any case, the returned strings are '0' terminated.
*
* \warning If the socket is using a connectionless protocol, the address may not be available
* until I/O occurs on the socket.
*/
int sock_getmyinfo(SOCKET sock, char *address, int addrlen, char *port, int portlen, int flags, char *errbuf, int errbuflen)
{
struct sockaddr_storage mysockaddr;
socklen_t sockaddrlen;
sockaddrlen = sizeof(struct sockaddr_storage);
if (getsockname(sock, (struct sockaddr *) &mysockaddr, &sockaddrlen) == -1)
{
sock_geterror("getsockname(): ", errbuf, errbuflen);
return 0;
}
/* Returns the numeric address of the host that triggered the error */
return sock_getascii_addrport(&mysockaddr, address, addrlen, port, portlen, flags, errbuf, errbuflen);
}
/*
* \brief It retrieves two strings containing the address and the port of a given 'sockaddr' variable.
*
* This function is basically an extended version of the inet_ntop(), which does not exist in
* Winsock because the same result can be obtained by using the getnameinfo().
* However, differently from inet_ntop(), this function is able to return also literal names
* (e.g. 'localhost') dependently from the 'Flags' parameter.
*
* The function accepts a sockaddr_storage variable (which can be returned by several functions
* like bind(), connect(), accept(), and more) and it transforms its content into a 'human'
* form. So, for instance, it is able to translate an hex address (stored in binary form) into
* a standard IPv6 address like "::1".
*
* The behavior of this function depends on the parameters we have in the 'Flags' variable, which
* are the ones allowed in the standard getnameinfo() socket function.
*
* \param sockaddr: a 'sockaddr_in' or 'sockaddr_in6' structure containing the address that
* need to be translated from network form into the presentation form. This structure must be
* zero-ed prior using it, and the address family field must be filled with the proper value.
* The user must cast any 'sockaddr_in' or 'sockaddr_in6' structures to 'sockaddr_storage' before
* calling this function.
*
* \param address: it contains the address that will be returned by the function. This buffer
* must be properly allocated by the user. The address can be either literal or numeric depending
* on the value of 'Flags'.
*
* \param addrlen: the length of the 'address' buffer.
*
* \param port: it contains the port that will be returned by the function. This buffer
* must be properly allocated by the user.
*
* \param portlen: the length of the 'port' buffer.
*
* \param flags: a set of flags (the ones defined into the getnameinfo() standard socket function)
* that determine if the resulting address must be in numeric / literal form, and so on.
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return It returns '-1' if this function succeeds, '0' otherwise.
* The address and port corresponding to the given SockAddr are returned back in the buffers 'address'
* and 'port'.
* In any case, the returned strings are '0' terminated.
*/
int sock_getascii_addrport(const struct sockaddr_storage *sockaddr, char *address, int addrlen, char *port, int portlen, int flags, char *errbuf, int errbuflen)
{
socklen_t sockaddrlen;
int retval; /* Variable that keeps the return value; */
retval = -1;
#ifdef _WIN32
if (sockaddr->ss_family == AF_INET)
sockaddrlen = sizeof(struct sockaddr_in);
else
sockaddrlen = sizeof(struct sockaddr_in6);
#else
sockaddrlen = sizeof(struct sockaddr_storage);
#endif
if ((flags & NI_NUMERICHOST) == 0) /* Check that we want literal names */
{
if ((sockaddr->ss_family == AF_INET6) &&
(memcmp(&((struct sockaddr_in6 *) sockaddr)->sin6_addr, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0", sizeof(struct in6_addr)) == 0))
{
if (address)
strlcpy(address, SOCKET_NAME_NULL_DAD, addrlen);
return retval;
}
}
if (getnameinfo((struct sockaddr *) sockaddr, sockaddrlen, address, addrlen, port, portlen, flags) != 0)
{
/* If the user wants to receive an error message */
if (errbuf)
{
sock_geterror("getnameinfo(): ", errbuf, errbuflen);
errbuf[errbuflen - 1] = 0;
}
if (address)
{
strlcpy(address, SOCKET_NO_NAME_AVAILABLE, addrlen);
address[addrlen - 1] = 0;
}
if (port)
{
strlcpy(port, SOCKET_NO_PORT_AVAILABLE, portlen);
port[portlen - 1] = 0;
}
retval = 0;
}
return retval;
}
/*
* \brief It translates an address from the 'presentation' form into the 'network' form.
*
* This function basically replaces inet_pton(), which does not exist in Winsock because
* the same result can be obtained by using the getaddrinfo().
* An additional advantage is that 'Address' can be both a numeric address (e.g. '127.0.0.1',
* like in inet_pton() ) and a literal name (e.g. 'localhost').
*
* This function does the reverse job of sock_getascii_addrport().
*
* \param address: a zero-terminated string which contains the name you have to
* translate. The name can be either literal (e.g. 'localhost') or numeric (e.g. '::1').
*
* \param sockaddr: a user-allocated sockaddr_storage structure which will contains the
* 'network' form of the requested address.
*
* \param addr_family: a constant which can assume the following values:
* - 'AF_INET' if we want to ping an IPv4 host
* - 'AF_INET6' if we want to ping an IPv6 host
* - 'AF_UNSPEC' if we do not have preferences about the protocol used to ping the host
*
* \param errbuf: a pointer to an user-allocated buffer that will contain the complete
* error message. This buffer has to be at least 'errbuflen' in length.
* It can be NULL; in this case the error cannot be printed.
*
* \param errbuflen: length of the buffer that will contains the error. The error message cannot be
* larger than 'errbuflen - 1' because the last char is reserved for the string terminator.
*
* \return '-1' if the translation succeeded, '-2' if there was some non critical error, '0'
* otherwise. In case it fails, the content of the SockAddr variable remains unchanged.
* A 'non critical error' can occur in case the 'Address' is a literal name, which can be mapped
* to several network addresses (e.g. 'foo.bar.com' => '10.2.2.2' and '10.2.2.3'). In this case
* the content of the SockAddr parameter will be the address corresponding to the first mapping.
*
* \warning The sockaddr_storage structure MUST be allocated by the user.
*/
int sock_present2network(const char *address, struct sockaddr_storage *sockaddr, int addr_family, char *errbuf, int errbuflen)
{
int retval;
struct addrinfo *addrinfo;
struct addrinfo hints;
memset(&hints, 0, sizeof(hints));
hints.ai_family = addr_family;
if ((retval = sock_initaddress(address, "22222" /* fake port */, &hints, &addrinfo, errbuf, errbuflen)) == -1)
return 0;
if (addrinfo->ai_family == PF_INET)
memcpy(sockaddr, addrinfo->ai_addr, sizeof(struct sockaddr_in));
else
memcpy(sockaddr, addrinfo->ai_addr, sizeof(struct sockaddr_in6));
if (addrinfo->ai_next != NULL)
{
freeaddrinfo(addrinfo);
if (errbuf)
pcap_snprintf(errbuf, errbuflen, "More than one socket requested; using the first one returned");
return -2;
}
freeaddrinfo(addrinfo);
return -1;
}