freebsd-dev/sys/sparc64/pci/ofw_pcibus.c
2006-01-20 22:01:34 +00:00

248 lines
7.6 KiB
C

/*-
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* Copyright (c) 2000, Michael Smith <msmith@freebsd.org>
* Copyright (c) 2000, BSDi
* Copyright (c) 2003, Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ofw_pci.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/libkern.h>
#include <sys/module.h>
#include <sys/pciio.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/ofw_pci.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/bus_common.h>
#include <machine/cache.h>
#include <machine/iommureg.h>
#include <machine/resource.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pci_private.h>
#include <sparc64/pci/ofw_pci.h>
#include "pcib_if.h"
#include "pci_if.h"
/* Helper functions. */
static void ofw_pcibus_setup_device(device_t, u_int, u_int, u_int);
/* Methods. */
static device_probe_t ofw_pcibus_probe;
static device_attach_t ofw_pcibus_attach;
static pci_assign_interrupt_t ofw_pcibus_assign_interrupt;
static ofw_bus_get_devinfo_t ofw_pcibus_get_devinfo;
static device_method_t ofw_pcibus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ofw_pcibus_probe),
DEVMETHOD(device_attach, ofw_pcibus_attach),
/* Bus interface */
/* PCI interface */
DEVMETHOD(pci_assign_interrupt, ofw_pcibus_assign_interrupt),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, ofw_pcibus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
{ 0, 0 }
};
struct ofw_pcibus_devinfo {
struct pci_devinfo opd_dinfo;
struct ofw_bus_devinfo opd_obdinfo;
};
struct ofw_pcibus_softc {
phandle_t ops_node;
};
static devclass_t pci_devclass;
DEFINE_CLASS_1(pci, ofw_pcibus_driver, ofw_pcibus_methods,
sizeof(struct ofw_pcibus_softc), pci_driver);
DRIVER_MODULE(ofw_pcibus, pcib, ofw_pcibus_driver, pci_devclass, 0, 0);
MODULE_VERSION(ofw_pcibus, 1);
MODULE_DEPEND(ofw_pcibus, pci, 1, 1, 1);
static int
ofw_pcibus_probe(device_t dev)
{
if (ofw_bus_get_node(dev) == 0)
return (ENXIO);
device_set_desc(dev, "OFW PCI bus");
return (0);
}
/*
* Perform miscellaneous setups the firmware usually does not do for us.
*/
static void
ofw_pcibus_setup_device(device_t bridge, u_int busno, u_int slot, u_int func)
{
u_int lat, clnsz;
/*
* Initialize the latency timer register for busmaster devices to work
* properly. This is another task which the firmware does not always
* perform. The Min_Gnt register can be used to compute it's recommended
* value: it contains the desired latency in units of 1/4 us. To
* calculate the correct latency timer value, a bus clock of 33MHz and
* no wait states should be assumed.
*/
lat = PCIB_READ_CONFIG(bridge, busno, slot, func, PCIR_MINGNT, 1) *
33 / 4;
if (lat != 0) {
#ifdef OFW_PCI_DEBUG
device_printf(bridge, "device %d/%d/%d: latency timer %d -> "
"%d\n", busno, slot, func,
PCIB_READ_CONFIG(bridge, busno, slot, func,
PCIR_LATTIMER, 1), lat);
#endif /* OFW_PCI_DEBUG */
PCIB_WRITE_CONFIG(bridge, busno, slot, func,
PCIR_LATTIMER, min(lat, 255), 1);
}
/*
* Compute a value to write into the cache line size register.
* The role of the streaming cache is unclear in write invalidate
* transfers, so it is made sure that it's line size is always reached.
*/
clnsz = max(cache.ec_linesize, STRBUF_LINESZ);
KASSERT((clnsz / STRBUF_LINESZ) * STRBUF_LINESZ == clnsz &&
(clnsz / cache.ec_linesize) * cache.ec_linesize == clnsz &&
(clnsz / 4) * 4 == clnsz, ("bogus cache line size %d", clnsz));
PCIB_WRITE_CONFIG(bridge, busno, slot, func, PCIR_CACHELNSZ,
clnsz / 4, 1);
/*
* The preset in the intline register is usually wrong. Reset it to 255,
* so that the PCI code will reroute the interrupt if needed.
*/
PCIB_WRITE_CONFIG(bridge, busno, slot, func, PCIR_INTLINE,
PCI_INVALID_IRQ, 1);
}
static int
ofw_pcibus_attach(device_t dev)
{
device_t pcib;
struct ofw_pci_register pcir;
struct ofw_pcibus_devinfo *dinfo;
phandle_t node, child;
u_int slot, busno, func;
pcib = device_get_parent(dev);
/*
* Ask the bridge for the bus number - in some cases, we need to
* renumber buses, so the firmware information cannot be trusted.
*/
busno = pcib_get_bus(dev);
if (bootverbose)
device_printf(dev, "physical bus=%d\n", busno);
node = ofw_bus_get_node(dev);
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if (OF_getprop(child, "reg", &pcir, sizeof(pcir)) == -1)
continue;
slot = OFW_PCI_PHYS_HI_DEVICE(pcir.phys_hi);
func = OFW_PCI_PHYS_HI_FUNCTION(pcir.phys_hi);
ofw_pcibus_setup_device(pcib, busno, slot, func);
dinfo = (struct ofw_pcibus_devinfo *)pci_read_device(pcib,
busno, slot, func, sizeof(*dinfo));
if (dinfo == NULL)
continue;
if (ofw_bus_gen_setup_devinfo(&dinfo->opd_obdinfo, child) !=
0) {
pci_freecfg((struct pci_devinfo *)dinfo);
continue;
}
pci_add_child(dev, (struct pci_devinfo *)dinfo);
}
return (bus_generic_attach(dev));
}
static int
ofw_pcibus_assign_interrupt(device_t dev, device_t child)
{
ofw_pci_intr_t intr;
int isz;
isz = OF_getprop(ofw_bus_get_node(child), "interrupts", &intr,
sizeof(intr));
if (isz != sizeof(intr)) {
/* No property; our best guess is the intpin. */
intr = pci_get_intpin(child);
} else if (intr >= 255) {
/*
* A fully specified interrupt (including IGN), as present on
* SPARCengine Ultra AX and e450. Extract the INO and return it.
*/
return (INTINO(intr));
}
/*
* If we got intr from a property, it may or may not be an intpin.
* For on-board devices, it frequently is not, and is completely out
* of the valid intpin range. For PCI slots, it hopefully is, otherwise
* we will have trouble interfacing with non-OFW buses such as cardbus.
* Since we cannot tell which it is without violating layering, we
* will always use the route_interrupt method, and treat exceptions on
* the level they become apparent.
*/
return (PCIB_ROUTE_INTERRUPT(device_get_parent(dev), child, intr));
}
static const struct ofw_bus_devinfo *
ofw_pcibus_get_devinfo(device_t bus, device_t dev)
{
struct ofw_pcibus_devinfo *dinfo;
dinfo = device_get_ivars(dev);
return (&dinfo->opd_obdinfo);
}