freebsd-dev/sys/i4b/layer1/i4b_avm_a1.c
1999-03-07 16:08:20 +00:00

509 lines
14 KiB
C

/*
* Copyright (c) 1996 Andrew Gordon. All rights reserved.
*
* Copyright (c) 1997, 1999 Hellmuth Michaelis. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* 4. Altered versions must be plainly marked as such, and must not be
* misrepresented as being the original software and/or documentation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* i4b_avm_a1.c - AVM A1/Fritz passive card driver for isdn4bsd
* ------------------------------------------------------------
*
* $Id: i4b_avm_a1.c,v 1.21 1999/02/14 09:44:58 hm Exp $
*
* last edit-date: [Sun Feb 14 10:25:11 1999]
*
*---------------------------------------------------------------------------*/
#if defined(__FreeBSD__)
#include "isic.h"
#include "opt_i4b.h"
#else
#define NISIC 1
#endif
#if NISIC > 0 && defined(AVM_A1)
#include <sys/param.h>
#if defined(__FreeBSD__) && __FreeBSD__ >= 3
#include <sys/ioccom.h>
#else
#include <sys/ioctl.h>
#endif
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#ifdef __FreeBSD__
#include <machine/clock.h>
#include <i386/isa/isa_device.h>
#else
#include <machine/bus.h>
#include <sys/device.h>
#endif
#include <sys/socket.h>
#include <net/if.h>
#ifdef __FreeBSD__
#include <machine/i4b_debug.h>
#include <machine/i4b_ioctl.h>
#else
#include <i4b/i4b_debug.h>
#include <i4b/i4b_ioctl.h>
#endif
#include <i4b/include/i4b_global.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/i4b_isac.h>
#include <i4b/layer1/i4b_hscx.h>
#ifndef __FreeBSD__
static u_int8_t avma1_read_reg __P((struct isic_softc *sc, int what, bus_size_t offs));
static void avma1_write_reg __P((struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data));
static void avma1_read_fifo __P((struct isic_softc *sc, int what, void *buf, size_t size));
static void avma1_write_fifo __P((struct isic_softc *sc, int what, const void *data, size_t size));
#endif
/*---------------------------------------------------------------------------*
* AVM A1 and AVM Fritz! Card special registers
*---------------------------------------------------------------------------*/
#define AVM_CONF_REG 0x1800 /* base offset for config register */
#define AVM_CONF_IRQ 0x1801 /* base offset for IRQ register */
/* config register write */
#define AVM_CONF_WR_RESET 0x01 /* 1 = RESET ISAC and HSCX */
#define AVM_CONF_WR_CCL 0x02 /* 1 = clear counter low nibble */
#define AVM_CONF_WR_CCH 0x04 /* 1 = clear counter high nibble */
#define AVM_CONF_WR_IRQEN 0x08 /* 1 = enable IRQ */
#define AVM_CONF_WR_TEST 0x10 /* test bit */
/* config register read */
#define AVM_CONF_RD_IIRQ 0x01 /* 0 = ISAC IRQ active */
#define AVM_CONF_RD_HIRQ 0x02 /* 0 = HSCX IRQ active */
#define AVM_CONF_RD_CIRQ 0x04 /* 0 = counter IRQ active */
#define AVM_CONF_RD_ZER1 0x08 /* unused, always read 0 */
#define AVM_CONF_RD_TEST 0x10 /* test bit read back */
#define AVM_CONF_RD_ZER2 0x20 /* unused, always read 0 */
/*---------------------------------------------------------------------------*
* AVM read fifo routines
*---------------------------------------------------------------------------*/
#ifdef __FreeBSD__
static void
avma1_read_fifo(void *buf, const void *base, size_t len)
{
insb((int)base - 0x3e0, (u_char *)buf, (u_int)len);
}
#else
static void
avma1_read_fifo(struct isic_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = sc->sc_maps[what+4].t;
bus_space_handle_t h = sc->sc_maps[what+4].h;
bus_space_read_multi_1(t, h, 0, buf, size);
}
#endif
/*---------------------------------------------------------------------------*
* AVM write fifo routines
*---------------------------------------------------------------------------*/
#ifdef __FreeBSD__
static void
avma1_write_fifo(void *base, const void *buf, size_t len)
{
outsb((int)base - 0x3e0, (u_char *)buf, (u_int)len);
}
#else
static void
avma1_write_fifo(struct isic_softc *sc, int what, const void *buf, size_t size)
{
bus_space_tag_t t = sc->sc_maps[what+4].t;
bus_space_handle_t h = sc->sc_maps[what+4].h;
bus_space_write_multi_1(t, h, 0, (u_int8_t*)buf, size);
}
#endif
/*---------------------------------------------------------------------------*
* AVM write register routines
*---------------------------------------------------------------------------*/
#ifdef __FreeBSD__
static void
avma1_write_reg(u_char *base, u_int offset, u_int v)
{
outb((int)base + offset, (u_char)v);
}
#else
static void
avma1_write_reg(struct isic_softc *sc, int what, bus_size_t offs, u_int8_t data)
{
bus_space_tag_t t = sc->sc_maps[what+1].t;
bus_space_handle_t h = sc->sc_maps[what+1].h;
bus_space_write_1(t, h, offs, data);
}
#endif
/*---------------------------------------------------------------------------*
* AVM read register routines
*---------------------------------------------------------------------------*/
#ifdef __FreeBSD__
static u_char
avma1_read_reg(u_char *base, u_int offset)
{
return (inb((int)base + offset));
}
#else
static u_int8_t
avma1_read_reg(struct isic_softc *sc, int what, bus_size_t offs)
{
bus_space_tag_t t = sc->sc_maps[what+1].t;
bus_space_handle_t h = sc->sc_maps[what+1].h;
return bus_space_read_1(t, h, offs);
}
#endif
/*---------------------------------------------------------------------------*
* isic_probe_avma1 - probe for AVM A1 and compatibles
*---------------------------------------------------------------------------*/
#ifdef __FreeBSD__
int
isic_probe_avma1(struct isa_device *dev)
{
struct isic_softc *sc = &isic_sc[dev->id_unit];
u_char savebyte;
u_char byte;
/* check max unit range */
if(dev->id_unit >= ISIC_MAXUNIT)
{
printf("isic%d: Error, unit %d >= ISIC_MAXUNIT for AVM A1/Fritz!\n",
dev->id_unit, dev->id_unit);
return(0);
}
sc->sc_unit = dev->id_unit;
/* check IRQ validity */
switch(ffs(dev->id_irq)-1)
{
case 3:
case 4:
case 5:
case 6:
case 7:
case 8:
case 10:
case 11:
case 12:
case 13:
case 14:
case 15:
break;
default:
printf("isic%d: Error, invalid IRQ [%d] specified for AVM A1/Fritz!\n",
dev->id_unit, ffs(dev->id_irq)-1);
return(0);
break;
}
sc->sc_irq = dev->id_irq;
/* check if memory addr specified */
if(dev->id_maddr)
{
printf("isic%d: Error, mem addr 0x%lx specified for AVM A1/Fritz!\n",
dev->id_unit, (u_long)dev->id_maddr);
return(0);
}
dev->id_msize = 0;
/* check if we got an iobase */
switch(dev->id_iobase)
{
case 0x200:
case 0x240:
case 0x300:
case 0x340:
break;
default:
printf("isic%d: Error, invalid iobase 0x%x specified for AVM A1/Fritz!\n",
dev->id_unit, dev->id_iobase);
return(0);
break;
}
sc->sc_port = dev->id_iobase;
sc->clearirq = NULL;
sc->readreg = avma1_read_reg;
sc->writereg = avma1_write_reg;
sc->readfifo = avma1_read_fifo;
sc->writefifo = avma1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_AVMA1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* setup ISAC and HSCX base addr */
ISAC_BASE = (caddr_t)dev->id_iobase + 0x1400 - 0x20;
HSCX_A_BASE = (caddr_t)dev->id_iobase + 0x400 - 0x20;
HSCX_B_BASE = (caddr_t)dev->id_iobase + 0xc00 - 0x20;
/*
* Read HSCX A/B VSTR.
* Expected value for AVM A1 is 0x04 or 0x05 and for the
* AVM Fritz!Card is 0x05 in the least significant bits.
*/
if( (((HSCX_READ(0, H_VSTR) & 0xf) != 0x5) &&
((HSCX_READ(0, H_VSTR) & 0xf) != 0x4)) ||
(((HSCX_READ(1, H_VSTR) & 0xf) != 0x5) &&
((HSCX_READ(1, H_VSTR) & 0xf) != 0x4)) )
{
printf("isic%d: HSCX VSTR test failed for AVM A1/Fritz\n",
dev->id_unit);
printf("isic%d: HSC0: VSTR: %#x\n",
dev->id_unit, HSCX_READ(0, H_VSTR));
printf("isic%d: HSC1: VSTR: %#x\n",
dev->id_unit, HSCX_READ(1, H_VSTR));
return (0);
}
/* AVM A1 or Fritz! control register bits: */
/* read write */
/* 0x01 hscx irq* RESET */
/* 0x02 isac irq* clear counter1 */
/* 0x04 counter irq* clear counter2 */
/* 0x08 always 0 irq enable */
/* 0x10 read test bit set test bit */
/* 0x20 always 0 unused */
/*
* XXX the following test may be destructive, to prevent the
* worst case, we save the byte first, and in case the test
* fails, we write back the saved byte .....
*/
savebyte = inb(dev->id_iobase + AVM_CONF_REG);
/* write low to test bit */
outb(dev->id_iobase + AVM_CONF_REG, 0x00);
/* test bit and next higher and lower bit must be 0 */
if((byte = inb(dev->id_iobase + AVM_CONF_REG) & 0x38) != 0x00)
{
printf("isic%d: Error, probe-1 failed, 0x%02x should be 0x00 for AVM A1/Fritz!\n",
dev->id_unit, byte);
outb(dev->id_iobase + AVM_CONF_REG, savebyte);
return (0);
}
/* write high to test bit */
outb(dev->id_iobase + AVM_CONF_REG, 0x10);
/* test bit must be high, next higher and lower bit must be 0 */
if((byte = inb(dev->id_iobase + AVM_CONF_REG) & 0x38) != 0x10)
{
printf("isic%d: Error, probe-2 failed, 0x%02x should be 0x10 for AVM A1/Fritz!\n",
dev->id_unit, byte);
outb(dev->id_iobase + AVM_CONF_REG, savebyte);
return (0);
}
return (1);
}
#else
int
isic_probe_avma1(struct isic_attach_args *ia)
{
u_int8_t savebyte, v1, v2;
/*
* Read HSCX A/B VSTR.
* Expected value for AVM A1 is 0x04 or 0x05 and for the
* AVM Fritz!Card is 0x05 in the least significant bits.
*/
v1 = bus_space_read_1(ia->ia_maps[ISIC_WHAT_HSCXA+1].t, ia->ia_maps[ISIC_WHAT_HSCXA+1].h, H_VSTR) & 0x0f;
v2 = bus_space_read_1(ia->ia_maps[ISIC_WHAT_HSCXB+1].t, ia->ia_maps[ISIC_WHAT_HSCXB+1].h, H_VSTR) & 0x0f;
if (v1 != v2 || (v1 != 0x05 && v1 != 0x04))
return 0;
/* AVM A1 or Fritz! control register bits: */
/* read write */
/* 0x01 hscx irq* RESET */
/* 0x02 isac irq* clear counter1 */
/* 0x04 counter irq* clear counter2 */
/* 0x08 always 0 irq enable */
/* 0x10 read test bit set test bit */
/* 0x20 always 0 unused */
/*
* XXX the following test may be destructive, to prevent the
* worst case, we save the byte first, and in case the test
* fails, we write back the saved byte .....
*/
savebyte = bus_space_read_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0);
/* write low to test bit */
bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, 0);
/* test bit and next higher and lower bit must be 0 */
if((bus_space_read_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0) & 0x38) != 0x00)
{
bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, savebyte);
return 0;
}
/* write high to test bit */
bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, 0x10);
/* test bit must be high, next higher and lower bit must be 0 */
if((bus_space_read_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0) & 0x38) != 0x10)
{
bus_space_write_1(ia->ia_maps[0].t, ia->ia_maps[0].h, 0, savebyte);
return 0;
}
return (1);
}
#endif
/*---------------------------------------------------------------------------*
* isic_attach_avma1 - attach AVM A1 and compatibles
*---------------------------------------------------------------------------*/
#ifdef __FreeBSD__
int
isic_attach_avma1(struct isa_device *dev)
{
struct isic_softc *sc = &isic_sc[dev->id_unit];
/* reset the HSCX and ISAC chips */
outb(dev->id_iobase + AVM_CONF_REG, 0x00);
DELAY(SEC_DELAY / 10);
outb(dev->id_iobase + AVM_CONF_REG, AVM_CONF_WR_RESET);
DELAY(SEC_DELAY / 10);
outb(dev->id_iobase + AVM_CONF_REG, 0x00);
DELAY(SEC_DELAY / 10);
/* setup IRQ */
outb(dev->id_iobase + AVM_CONF_IRQ, (ffs(sc->sc_irq)) - 1);
DELAY(SEC_DELAY / 10);
/* enable IRQ, disable counter IRQ */
outb(dev->id_iobase + AVM_CONF_REG, AVM_CONF_WR_IRQEN |
AVM_CONF_WR_CCH | AVM_CONF_WR_CCL);
DELAY(SEC_DELAY / 10);
return (1);
}
#else
int
isic_attach_avma1(struct isic_softc *sc)
{
bus_space_tag_t t = sc->sc_maps[0].t;
bus_space_handle_t h = sc->sc_maps[0].h;
sc->clearirq = NULL;
sc->readreg = avma1_read_reg;
sc->writereg = avma1_write_reg;
sc->readfifo = avma1_read_fifo;
sc->writefifo = avma1_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_AVMA1;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* reset the HSCX and ISAC chips */
bus_space_write_1(t, h, 0, 0x00);
DELAY(SEC_DELAY / 10);
bus_space_write_1(t, h, 0, AVM_CONF_WR_RESET);
DELAY(SEC_DELAY / 10);
bus_space_write_1(t, h, 0, 0x00);
DELAY(SEC_DELAY / 10);
/* setup IRQ */
bus_space_write_1(t, h, 1, sc->sc_irq);
DELAY(SEC_DELAY / 10);
/* enable IRQ, disable counter IRQ */
bus_space_write_1(t, h, 0, AVM_CONF_WR_IRQEN |
AVM_CONF_WR_CCH | AVM_CONF_WR_CCL);
DELAY(SEC_DELAY / 10);
return (1);
}
#endif
#endif /* ISIC > 0 */