freebsd-dev/sys/dev/rc/rcreg.h
John Baldwin 599c57a971 - New-bussify the rc(4) device driver.
- Add detach support to the driver so that you can kldunload the module.
  Note that currently rc_detach() fails to detach a unit if any of its
  child devices are open, thus a kldunload will fail if any of the tty
  devices are currently open.
- sys/i386/isa/ic/cd180.h was moved to sys/dev/ic/cd180.h as part of
  this change.

Requested by:	rwatson
Tested by:	rwatson
2002-10-23 15:53:09 +00:00

71 lines
3.1 KiB
C

/*
* Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
* Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
* Copyright (C) 2002 by John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Cirrus Logic CD180 -based RISCom/8 board definitions
*/
/* Oscillator frequency - 19660.08Mhz / 2 */
#define RC_OSCFREQ 9830400
#define RC_BRD(s) ((s) == 0 ? 0 : \
(((RC_OSCFREQ + (s) / 2) / (s)) + CD180_CTICKS/2) / CD180_CTICKS)
/* Riscom/8 board ISA I/O mapping */
#define RC_IOMAP(r) ((((r) & 07) << 1) | (((r) & ~07) << 7))
/* I/O commands */
#define RC_OUT(sc, addr, value) \
bus_space_write_1((sc)->sc_bt, (sc)->sc_bh, RC_IOMAP(addr), (value))
#define RC_IN(sc, addr) \
bus_space_read_1((sc)->sc_bt, (sc)->sc_bh, RC_IOMAP(addr))
/* Riscom on-board registers (mapping assumed) */
#define RC_RIREG 0x100 /* Ring Indicator Register (read-only) */
#define RC_DTREG 0x100 /* DTR Register (write-only) */
#define RC_BSR 0x101 /* Board Status Register (read-only) */
#define RC_CTOUT 0x101 /* Clear Timeout (write-only) */
/* Board Status Register */
#define RC_BSR_TOUT 0x08 /* Timeout */
#define RC_BSR_RXINT 0x04 /* Receiver Interrupt */
#define RC_BSR_TXINT 0x02 /* Transmitter Interrupt */
#define RC_BSR_MOINT 0x01 /* Modem Control Interrupt */
/* Interrupt groups */
#define RC_MODEMGRP 0x01 /* Modem interrupt group */
#define RC_RXGRP 0x02 /* Receiver interrupt group */
#define RC_TXGRP 0x04 /* Transmitter interrupt group */
/* Priority Interrupt Level definitions */
#define RC_PILR_MODEM (0x80 | RC_MODEMGRP)
#define RC_PILR_RX (0x80 | RC_RXGRP )
#define RC_PILR_TX (0x80 | RC_TXGRP )