d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
838d985825
freebsd-dev/sys/netinet/ip_fw.h
Oleg Bulyzhin dda10d624c Close long existed race with net.inet.ip.fw.one_pass = 0: 
If packet leaves ipfw to other kernel subsystem (dummynet, netgraph, etc)
it carries pointer to matching ipfw rule. If this packet then reinjected back
to ipfw, ruleset processing starts from that rule. If rule was deleted
meanwhile, due to existed race condition panic was possible (as well as
other odd effects like parsing rules in 'reap list').

P.S. this commit changes ABI so userland ipfw related binaries should be
recompiled.

MFC after:	1 month
Tested by:	Mikolaj Golub
2009-06-09 21:27:11 +00:00

775 lines
23 KiB
C
Raw Blame History

/*-
* Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IPFW2_H
#define _IPFW2_H
/*
* The default rule number. By the design of ip_fw, the default rule
* is the last one, so its number can also serve as the highest number
* allowed for a rule. The ip_fw code relies on both meanings of this
* constant.
*/
#define IPFW_DEFAULT_RULE 65535
/*
* The number of ipfw tables. The maximum allowed table number is the
* (IPFW_TABLES_MAX - 1).
*/
#define IPFW_TABLES_MAX 128
/*
* Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
* argument between 1 and 65534. The value 0 is unused, the value
* 65535 (IP_FW_TABLEARG) is used to represent 'tablearg', i.e. the
* can be 1..65534, or 65535 to indicate the use of a 'tablearg'
* result of the most recent table() lookup.
* Note that 16bit is only a historical limit, resulting from
* the use of a 16-bit fields for that value. In reality, we can have
* 2^32 pipes, queues, tag values and so on, and use 0 as a tablearg.
*/
#define IPFW_ARG_MIN 1
#define IPFW_ARG_MAX 65534
#define IP_FW_TABLEARG 65535 /* XXX should use 0 */
/*
* The kernel representation of ipfw rules is made of a list of
* 'instructions' (for all practical purposes equivalent to BPF
* instructions), which specify which fields of the packet
* (or its metadata) should be analysed.
*
* Each instruction is stored in a structure which begins with
* "ipfw_insn", and can contain extra fields depending on the
* instruction type (listed below).
* Note that the code is written so that individual instructions
* have a size which is a multiple of 32 bits. This means that, if
* such structures contain pointers or other 64-bit entities,
* (there is just one instance now) they may end up unaligned on
* 64-bit architectures, so the must be handled with care.
*
* "enum ipfw_opcodes" are the opcodes supported. We can have up
* to 256 different opcodes. When adding new opcodes, they should
* be appended to the end of the opcode list before O_LAST_OPCODE,
* this will prevent the ABI from being broken, otherwise users
* will have to recompile ipfw(8) when they update the kernel.
*/
enum ipfw_opcodes { /* arguments (4 byte each) */
O_NOP,
O_IP_SRC, /* u32 = IP */
O_IP_SRC_MASK, /* ip = IP/mask */
O_IP_SRC_ME, /* none */
O_IP_SRC_SET, /* u32=base, arg1=len, bitmap */
O_IP_DST, /* u32 = IP */
O_IP_DST_MASK, /* ip = IP/mask */
O_IP_DST_ME, /* none */
O_IP_DST_SET, /* u32=base, arg1=len, bitmap */
O_IP_SRCPORT, /* (n)port list:mask 4 byte ea */
O_IP_DSTPORT, /* (n)port list:mask 4 byte ea */
O_PROTO, /* arg1=protocol */
O_MACADDR2, /* 2 mac addr:mask */
O_MAC_TYPE, /* same as srcport */
O_LAYER2, /* none */
O_IN, /* none */
O_FRAG, /* none */
O_RECV, /* none */
O_XMIT, /* none */
O_VIA, /* none */
O_IPOPT, /* arg1 = 2*u8 bitmap */
O_IPLEN, /* arg1 = len */
O_IPID, /* arg1 = id */
O_IPTOS, /* arg1 = id */
O_IPPRECEDENCE, /* arg1 = precedence << 5 */
O_IPTTL, /* arg1 = TTL */
O_IPVER, /* arg1 = version */
O_UID, /* u32 = id */
O_GID, /* u32 = id */
O_ESTAB, /* none (tcp established) */
O_TCPFLAGS, /* arg1 = 2*u8 bitmap */
O_TCPWIN, /* arg1 = desired win */
O_TCPSEQ, /* u32 = desired seq. */
O_TCPACK, /* u32 = desired seq. */
O_ICMPTYPE, /* u32 = icmp bitmap */
O_TCPOPTS, /* arg1 = 2*u8 bitmap */
O_VERREVPATH, /* none */
O_VERSRCREACH, /* none */
O_PROBE_STATE, /* none */
O_KEEP_STATE, /* none */
O_LIMIT, /* ipfw_insn_limit */
O_LIMIT_PARENT, /* dyn_type, not an opcode. */
/*
* These are really 'actions'.
*/
O_LOG, /* ipfw_insn_log */
O_PROB, /* u32 = match probability */
O_CHECK_STATE, /* none */
O_ACCEPT, /* none */
O_DENY, /* none */
O_REJECT, /* arg1=icmp arg (same as deny) */
O_COUNT, /* none */
O_SKIPTO, /* arg1=next rule number */
O_PIPE, /* arg1=pipe number */
O_QUEUE, /* arg1=queue number */
O_DIVERT, /* arg1=port number */
O_TEE, /* arg1=port number */
O_FORWARD_IP, /* fwd sockaddr */
O_FORWARD_MAC, /* fwd mac */
O_NAT, /* nope */
O_REASS, /* none */
/*
* More opcodes.
*/
O_IPSEC, /* has ipsec history */
O_IP_SRC_LOOKUP, /* arg1=table number, u32=value */
O_IP_DST_LOOKUP, /* arg1=table number, u32=value */
O_ANTISPOOF, /* none */
O_JAIL, /* u32 = id */
O_ALTQ, /* u32 = altq classif. qid */
O_DIVERTED, /* arg1=bitmap (1:loop, 2:out) */
O_TCPDATALEN, /* arg1 = tcp data len */
O_IP6_SRC, /* address without mask */
O_IP6_SRC_ME, /* my addresses */
O_IP6_SRC_MASK, /* address with the mask */
O_IP6_DST,
O_IP6_DST_ME,
O_IP6_DST_MASK,
O_FLOW6ID, /* for flow id tag in the ipv6 pkt */
O_ICMP6TYPE, /* icmp6 packet type filtering */
O_EXT_HDR, /* filtering for ipv6 extension header */
O_IP6,
/*
* actions for ng_ipfw
*/
O_NETGRAPH, /* send to ng_ipfw */
O_NGTEE, /* copy to ng_ipfw */
O_IP4,
O_UNREACH6, /* arg1=icmpv6 code arg (deny) */
O_TAG, /* arg1=tag number */
O_TAGGED, /* arg1=tag number */
O_SETFIB, /* arg1=FIB number */
O_FIB, /* arg1=FIB desired fib number */
O_LAST_OPCODE /* not an opcode! */
};
/*
* The extension header are filtered only for presence using a bit
* vector with a flag for each header.
*/
#define EXT_FRAGMENT 0x1
#define EXT_HOPOPTS 0x2
#define EXT_ROUTING 0x4
#define EXT_AH 0x8
#define EXT_ESP 0x10
#define EXT_DSTOPTS 0x20
#define EXT_RTHDR0 0x40
#define EXT_RTHDR2 0x80
/*
* Template for instructions.
*
* ipfw_insn is used for all instructions which require no operands,
* a single 16-bit value (arg1), or a couple of 8-bit values.
*
* For other instructions which require different/larger arguments
* we have derived structures, ipfw_insn_*.
*
* The size of the instruction (in 32-bit words) is in the low
* 6 bits of "len". The 2 remaining bits are used to implement
* NOT and OR on individual instructions. Given a type, you can
* compute the length to be put in "len" using F_INSN_SIZE(t)
*
* F_NOT negates the match result of the instruction.
*
* F_OR is used to build or blocks. By default, instructions
* are evaluated as part of a logical AND. An "or" block
* { X or Y or Z } contains F_OR set in all but the last
* instruction of the block. A match will cause the code
* to skip past the last instruction of the block.
*
* NOTA BENE: in a couple of places we assume that
* sizeof(ipfw_insn) == sizeof(u_int32_t)
* this needs to be fixed.
*
*/
typedef struct _ipfw_insn { /* template for instructions */
enum ipfw_opcodes opcode:8;
u_int8_t len; /* number of 32-bit words */
#define F_NOT 0x80
#define F_OR 0x40
#define F_LEN_MASK 0x3f
#define F_LEN(cmd) ((cmd)->len & F_LEN_MASK)
u_int16_t arg1;
} ipfw_insn;
/*
* The F_INSN_SIZE(type) computes the size, in 4-byte words, of
* a given type.
*/
#define F_INSN_SIZE(t) ((sizeof (t))/sizeof(u_int32_t))
/*
* This is used to store an array of 16-bit entries (ports etc.)
*/
typedef struct _ipfw_insn_u16 {
ipfw_insn o;
u_int16_t ports[2]; /* there may be more */
} ipfw_insn_u16;
/*
* This is used to store an array of 32-bit entries
* (uid, single IPv4 addresses etc.)
*/
typedef struct _ipfw_insn_u32 {
ipfw_insn o;
u_int32_t d[1]; /* one or more */
} ipfw_insn_u32;
/*
* This is used to store IP addr-mask pairs.
*/
typedef struct _ipfw_insn_ip {
ipfw_insn o;
struct in_addr addr;
struct in_addr mask;
} ipfw_insn_ip;
/*
* This is used to forward to a given address (ip).
*/
typedef struct _ipfw_insn_sa {
ipfw_insn o;
struct sockaddr_in sa;
} ipfw_insn_sa;
/*
* This is used for MAC addr-mask pairs.
*/
typedef struct _ipfw_insn_mac {
ipfw_insn o;
u_char addr[12]; /* dst[6] + src[6] */
u_char mask[12]; /* dst[6] + src[6] */
} ipfw_insn_mac;
/*
* This is used for interface match rules (recv xx, xmit xx).
*/
typedef struct _ipfw_insn_if {
ipfw_insn o;
union {
struct in_addr ip;
int glob;
} p;
char name[IFNAMSIZ];
} ipfw_insn_if;
/*
* This is used for storing an altq queue id number.
*/
typedef struct _ipfw_insn_altq {
ipfw_insn o;
u_int32_t qid;
} ipfw_insn_altq;
/*
* This is used for limit rules.
*/
typedef struct _ipfw_insn_limit {
ipfw_insn o;
u_int8_t _pad;
u_int8_t limit_mask; /* combination of DYN_* below */
#define DYN_SRC_ADDR 0x1
#define DYN_SRC_PORT 0x2
#define DYN_DST_ADDR 0x4
#define DYN_DST_PORT 0x8
u_int16_t conn_limit;
} ipfw_insn_limit;
/*
* This is used for log instructions.
*/
typedef struct _ipfw_insn_log {
ipfw_insn o;
u_int32_t max_log; /* how many do we log -- 0 = all */
u_int32_t log_left; /* how many left to log */
} ipfw_insn_log;
/*
* Data structures required by both ipfw(8) and ipfw(4) but not part of the
* management API are protected by IPFW_INTERNAL.
*/
#ifdef IPFW_INTERNAL
/* Server pool support (LSNAT). */
struct cfg_spool {
LIST_ENTRY(cfg_spool) _next; /* chain of spool instances */
struct in_addr addr;
u_short port;
};
#endif
/* Redirect modes id. */
#define REDIR_ADDR 0x01
#define REDIR_PORT 0x02
#define REDIR_PROTO 0x04
#ifdef IPFW_INTERNAL
/* Nat redirect configuration. */
struct cfg_redir {
LIST_ENTRY(cfg_redir) _next; /* chain of redir instances */
u_int16_t mode; /* type of redirect mode */
struct in_addr laddr; /* local ip address */
struct in_addr paddr; /* public ip address */
struct in_addr raddr; /* remote ip address */
u_short lport; /* local port */
u_short pport; /* public port */
u_short rport; /* remote port */
u_short pport_cnt; /* number of public ports */
u_short rport_cnt; /* number of remote ports */
int proto; /* protocol: tcp/udp */
struct alias_link **alink;
/* num of entry in spool chain */
u_int16_t spool_cnt;
/* chain of spool instances */
LIST_HEAD(spool_chain, cfg_spool) spool_chain;
};
#endif
#define NAT_BUF_LEN 1024
#ifdef IPFW_INTERNAL
/* Nat configuration data struct. */
struct cfg_nat {
/* chain of nat instances */
LIST_ENTRY(cfg_nat) _next;
int id; /* nat id */
struct in_addr ip; /* nat ip address */
char if_name[IF_NAMESIZE]; /* interface name */
int mode; /* aliasing mode */
struct libalias *lib; /* libalias instance */
/* number of entry in spool chain */
int redir_cnt;
/* chain of redir instances */
LIST_HEAD(redir_chain, cfg_redir) redir_chain;
};
#endif
#define SOF_NAT sizeof(struct cfg_nat)
#define SOF_REDIR sizeof(struct cfg_redir)
#define SOF_SPOOL sizeof(struct cfg_spool)
/* Nat command. */
typedef struct _ipfw_insn_nat {
ipfw_insn o;
struct cfg_nat *nat;
} ipfw_insn_nat;
/* Apply ipv6 mask on ipv6 addr */
#define APPLY_MASK(addr,mask) \
(addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
(addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
(addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
(addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3];
/* Structure for ipv6 */
typedef struct _ipfw_insn_ip6 {
ipfw_insn o;
struct in6_addr addr6;
struct in6_addr mask6;
} ipfw_insn_ip6;
/* Used to support icmp6 types */
typedef struct _ipfw_insn_icmp6 {
ipfw_insn o;
uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
* define ICMP6_MAXTYPE
* as follows: n = ICMP6_MAXTYPE/32 + 1
* Actually is 203
*/
} ipfw_insn_icmp6;
/*
* Here we have the structure representing an ipfw rule.
*
* It starts with a general area (with link fields and counters)
* followed by an array of one or more instructions, which the code
* accesses as an array of 32-bit values.
*
* Given a rule pointer r:
*
* r->cmd is the start of the first instruction.
* ACTION_PTR(r) is the start of the first action (things to do
* once a rule matched).
*
* When assembling instruction, remember the following:
*
* + if a rule has a "keep-state" (or "limit") option, then the
* first instruction (at r->cmd) MUST BE an O_PROBE_STATE
* + if a rule has a "log" option, then the first action
* (at ACTION_PTR(r)) MUST be O_LOG
* + if a rule has an "altq" option, it comes after "log"
* + if a rule has an O_TAG option, it comes after "log" and "altq"
*
* NOTE: we use a simple linked list of rules because we never need
* to delete a rule without scanning the list. We do not use
* queue(3) macros for portability and readability.
*/
struct ip_fw {
struct ip_fw *next; /* linked list of rules */
struct ip_fw *next_rule; /* ptr to next [skipto] rule */
/* 'next_rule' is used to pass up 'set_disable' status */
uint16_t act_ofs; /* offset of action in 32-bit units */
uint16_t cmd_len; /* # of 32-bit words in cmd */
uint16_t rulenum; /* rule number */
uint8_t set; /* rule set (0..31) */
#define RESVD_SET 31 /* set for default and persistent rules */
uint8_t _pad; /* padding */
uint32_t id; /* rule id */
/* These fields are present in all rules. */
uint64_t pcnt; /* Packet counter */
uint64_t bcnt; /* Byte counter */
uint32_t timestamp; /* tv_sec of last match */
ipfw_insn cmd[1]; /* storage for commands */
};
#define ACTION_PTR(rule) \
(ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
#define RULESIZE(rule) (sizeof(struct ip_fw) + \
((struct ip_fw *)(rule))->cmd_len * 4 - 4)
/*
* This structure is used as a flow mask and a flow id for various
* parts of the code.
*/
struct ipfw_flow_id {
u_int32_t dst_ip;
u_int32_t src_ip;
u_int16_t dst_port;
u_int16_t src_port;
u_int8_t fib;
u_int8_t proto;
u_int8_t flags; /* protocol-specific flags */
uint8_t addr_type; /* 4 = ipv4, 6 = ipv6, 1=ether ? */
struct in6_addr dst_ip6; /* could also store MAC addr! */
struct in6_addr src_ip6;
u_int32_t flow_id6;
u_int32_t frag_id6;
};
#define IS_IP6_FLOW_ID(id) ((id)->addr_type == 6)
/*
* Dynamic ipfw rule.
*/
typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
struct _ipfw_dyn_rule {
ipfw_dyn_rule *next; /* linked list of rules. */
struct ip_fw *rule; /* pointer to rule */
/* 'rule' is used to pass up the rule number (from the parent) */
ipfw_dyn_rule *parent; /* pointer to parent rule */
u_int64_t pcnt; /* packet match counter */
u_int64_t bcnt; /* byte match counter */
struct ipfw_flow_id id; /* (masked) flow id */
u_int32_t expire; /* expire time */
u_int32_t bucket; /* which bucket in hash table */
u_int32_t state; /* state of this rule (typically a
* combination of TCP flags)
*/
u_int32_t ack_fwd; /* most recent ACKs in forward */
u_int32_t ack_rev; /* and reverse directions (used */
/* to generate keepalives) */
u_int16_t dyn_type; /* rule type */
u_int16_t count; /* refcount */
};
/*
* Definitions for IP option names.
*/
#define IP_FW_IPOPT_LSRR 0x01
#define IP_FW_IPOPT_SSRR 0x02
#define IP_FW_IPOPT_RR 0x04
#define IP_FW_IPOPT_TS 0x08
/*
* Definitions for TCP option names.
*/
#define IP_FW_TCPOPT_MSS 0x01
#define IP_FW_TCPOPT_WINDOW 0x02
#define IP_FW_TCPOPT_SACK 0x04
#define IP_FW_TCPOPT_TS 0x08
#define IP_FW_TCPOPT_CC 0x10
#define ICMP_REJECT_RST 0x100 /* fake ICMP code (send a TCP RST) */
#define ICMP6_UNREACH_RST 0x100 /* fake ICMPv6 code (send a TCP RST) */
/*
* These are used for lookup tables.
*/
typedef struct _ipfw_table_entry {
in_addr_t addr; /* network address */
u_int32_t value; /* value */
u_int16_t tbl; /* table number */
u_int8_t masklen; /* mask length */
} ipfw_table_entry;
typedef struct _ipfw_table {
u_int32_t size; /* size of entries in bytes */
u_int32_t cnt; /* # of entries */
u_int16_t tbl; /* table number */
ipfw_table_entry ent[0]; /* entries */
} ipfw_table;
/*
* Main firewall chains definitions and global var's definitions.
*/
#ifdef _KERNEL
#define MTAG_IPFW 1148380143 /* IPFW-tagged cookie */
/* Return values from ipfw_chk() */
enum {
IP_FW_PASS = 0,
IP_FW_DENY,
IP_FW_DIVERT,
IP_FW_TEE,
IP_FW_DUMMYNET,
IP_FW_NETGRAPH,
IP_FW_NGTEE,
IP_FW_NAT,
IP_FW_REASS,
};
/* flags for divert mtag */
#define IP_FW_DIVERT_LOOPBACK_FLAG 0x00080000
#define IP_FW_DIVERT_OUTPUT_FLAG 0x00100000
/*
* Structure for collecting parameters to dummynet for ip6_output forwarding
*/
struct _ip6dn_args {
struct ip6_pktopts *opt_or;
struct route_in6 ro_or;
int flags_or;
struct ip6_moptions *im6o_or;
struct ifnet *origifp_or;
struct ifnet *ifp_or;
struct sockaddr_in6 dst_or;
u_long mtu_or;
struct route_in6 ro_pmtu_or;
};
/*
* Arguments for calling ipfw_chk() and dummynet_io(). We put them
* all into a structure because this way it is easier and more
* efficient to pass variables around and extend the interface.
*/
struct ip_fw_args {
struct mbuf *m; /* the mbuf chain */
struct ifnet *oif; /* output interface */
struct sockaddr_in *next_hop; /* forward address */
struct ip_fw *rule; /* matching rule */
uint32_t rule_id; /* matching rule id */
uint32_t chain_id; /* ruleset id */
struct ether_header *eh; /* for bridged packets */
struct ipfw_flow_id f_id; /* grabbed from IP header */
uint32_t cookie; /* a cookie depending on rule action */
struct inpcb *inp;
struct _ip6dn_args dummypar; /* dummynet->ip6_output */
struct sockaddr_in hopstore; /* store here if cannot use a pointer */
};
/*
* Function definitions.
*/
/* Firewall hooks */
struct sockopt;
struct dn_flow_set;
int ipfw_check_in(void *, struct mbuf **, struct ifnet *, int, struct inpcb *inp);
int ipfw_check_out(void *, struct mbuf **, struct ifnet *, int, struct inpcb *inp);
int ipfw_chk(struct ip_fw_args *);
int ipfw_init(void);
void ipfw_destroy(void);
#ifdef NOTYET
void ipfw_nat_destroy(void);
#endif
#ifdef VIMAGE_GLOBALS
extern int fw_one_pass;
extern int fw_enable;
#ifdef INET6
extern int fw6_enable;
#endif
#endif
struct ip_fw_chain {
struct ip_fw *rules; /* list of rules */
struct ip_fw *reap; /* list of rules to reap */
LIST_HEAD(, cfg_nat) nat; /* list of nat entries */
struct radix_node_head *tables[IPFW_TABLES_MAX];
struct rwlock rwmtx;
uint32_t id; /* ruleset id */
};
#ifdef IPFW_INTERNAL
#define IPFW_LOCK_INIT(_chain) \
rw_init(&(_chain)->rwmtx, "IPFW static rules")
#define IPFW_LOCK_DESTROY(_chain) rw_destroy(&(_chain)->rwmtx)
#define IPFW_WLOCK_ASSERT(_chain) rw_assert(&(_chain)->rwmtx, RA_WLOCKED)
#define IPFW_RLOCK(p) rw_rlock(&(p)->rwmtx)
#define IPFW_RUNLOCK(p) rw_runlock(&(p)->rwmtx)
#define IPFW_WLOCK(p) rw_wlock(&(p)->rwmtx)
#define IPFW_WUNLOCK(p) rw_wunlock(&(p)->rwmtx)
#define LOOKUP_NAT(l, i, p) do { \
LIST_FOREACH((p), &(l.nat), _next) { \
if ((p)->id == (i)) { \
break; \
} \
} \
} while (0)
typedef int ipfw_nat_t(struct ip_fw_args *, struct cfg_nat *, struct mbuf *);
typedef int ipfw_nat_cfg_t(struct sockopt *);
#endif
struct eventhandler_entry;
/*
* Stack virtualization support.
*/
struct vnet_ipfw {
int _fw_enable;
int _fw6_enable;
u_int32_t _set_disable;
int _fw_deny_unknown_exthdrs;
int _fw_verbose;
int _verbose_limit;
int _autoinc_step;
ipfw_dyn_rule ** _ipfw_dyn_v;
uma_zone_t _ipfw_dyn_rule_zone;
struct ip_fw_chain _layer3_chain;
u_int32_t _dyn_buckets;
u_int32_t _curr_dyn_buckets;
u_int32_t _dyn_ack_lifetime;
u_int32_t _dyn_syn_lifetime;
u_int32_t _dyn_fin_lifetime;
u_int32_t _dyn_rst_lifetime;
u_int32_t _dyn_udp_lifetime;
u_int32_t _dyn_short_lifetime;
u_int32_t _dyn_keepalive_interval;
u_int32_t _dyn_keepalive_period;
u_int32_t _dyn_keepalive;
u_int32_t _static_count;
u_int32_t _static_len;
u_int32_t _dyn_count;
u_int32_t _dyn_max;
u_int64_t _norule_counter;
struct callout _ipfw_timeout;
struct eventhandler_entry *_ifaddr_event_tag;
};
#ifndef VIMAGE
#ifndef VIMAGE_GLOBALS
extern struct vnet_ipfw vnet_ipfw_0;
#endif
#endif
/*
* Symbol translation macros
*/
#define INIT_VNET_IPFW(vnet) \
INIT_FROM_VNET(vnet, VNET_MOD_IPFW, struct vnet_ipfw, vnet_ipfw)
#define VNET_IPFW(sym) VSYM(vnet_ipfw, sym)
#define V_fw_enable VNET_IPFW(fw_enable)
#define V_fw6_enable VNET_IPFW(fw6_enable)
#define V_set_disable VNET_IPFW(set_disable)
#define V_fw_deny_unknown_exthdrs VNET_IPFW(fw_deny_unknown_exthdrs)
#define V_fw_verbose VNET_IPFW(fw_verbose)
#define V_verbose_limit VNET_IPFW(verbose_limit)
#define V_autoinc_step VNET_IPFW(autoinc_step)
#define V_ipfw_dyn_v VNET_IPFW(ipfw_dyn_v)
#define V_ipfw_dyn_rule_zone VNET_IPFW(ipfw_dyn_rule_zone)
#define V_layer3_chain VNET_IPFW(layer3_chain)
#define V_dyn_buckets VNET_IPFW(dyn_buckets)
#define V_curr_dyn_buckets VNET_IPFW(curr_dyn_buckets)
#define V_dyn_ack_lifetime VNET_IPFW(dyn_ack_lifetime)
#define V_dyn_syn_lifetime VNET_IPFW(dyn_syn_lifetime)
#define V_dyn_fin_lifetime VNET_IPFW(dyn_fin_lifetime)
#define V_dyn_rst_lifetime VNET_IPFW(dyn_rst_lifetime)
#define V_dyn_udp_lifetime VNET_IPFW(dyn_udp_lifetime)
#define V_dyn_short_lifetime VNET_IPFW(dyn_short_lifetime)
#define V_dyn_keepalive_interval VNET_IPFW(dyn_keepalive_interval)
#define V_dyn_keepalive_period VNET_IPFW(dyn_keepalive_period)
#define V_dyn_keepalive VNET_IPFW(dyn_keepalive)
#define V_static_count VNET_IPFW(static_count)
#define V_static_len VNET_IPFW(static_len)
#define V_dyn_count VNET_IPFW(dyn_count)
#define V_dyn_max VNET_IPFW(dyn_max)
#define V_norule_counter VNET_IPFW(norule_counter)
#define V_ipfw_timeout VNET_IPFW(ipfw_timeout)
#define V_ifaddr_event_tag VNET_IPFW(ifaddr_event_tag)
#endif /* _KERNEL */
#endif /* _IPFW2_H */
Reference in New Issue View Git Blame Copy Permalink