freebsd-dev/sys/modules/cxgbe
Navdeep Parhar 96807c23ce cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0.
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire
v2.12.0.3 for Linux" release.  Changes since 1.14.4.0 (which is the
firmware in -STABLE branches) are in the "Release Notes" accompanying
the Unified Wire release and are copy-pasted here as well.

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.15.37.0
Date    : 04/27/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
   queue was ignored.
 - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
 - Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
 - Fixed 40G link failures with some switches when auto-negotiation enabled.
 - Fixed to improve on link bring-up time.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where bogus d3hot bits were set causing traffic stall.
 - Fixed an issue where sometimes adapter was not seen after reboot.
 - Fixed an issue where iWARP was crashing in conjunction with traffic management.
 - Fixed an issue where link failed to come up after removing twinax cable and
   inserting optical module.

ETH
 - Fixed a link flap issue on T580-CR.

OFLD
 - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.

FOiSCSI
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
   use given inerface.
 - Fixed an issue where fw was sending ENETUNREACH event for normal tcp
   disconnection.

DCBX
 - Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE)
 - Fixed an issue where apply bit set for APP id was affecting the ETS and PFC
  settings.(DCBX IEEE)
 - Fixed an issue where app priority values are not handled correctly in fw.
  (DCBX IEEE)
 - Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE)

FOFCoE
 - Removed BB6 support.

ENHANCEMENTS
------------

BASE:
 - Added new interface to program DCA settings in SGE contexts; allow 32-byte
   IQE size
 - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

OFLD:
 - WR opcode is returned to host in cqe error response.

22.2. T4 Firmware
+++++++++++++++++

Version : 1.15.37.0
Date    : 04/27/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
   was ignored.
 - Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where iWARP was crashing in conjunction with traffic management.

FOiSCSI:
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
   use given inerface.

DCBX
 - Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE)
 - Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE)

FOiSCSI
 - Fixes an issue where fw was sending ENETUNREACH event for normal tcp
   disconnection.

FOFCoE
 - Removed BB6 support.

ENHANCEMENTS
------------

BASE:
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
================================================================================

Obtained from:	Chelsio Communications
MFC after:	6 weeks
Relnotes:	yes
Sponsored by:	Chelsio Communications
2016-05-13 17:38:59 +00:00
..
cxgbei cxgbei: Hardware accelerated iSCSI target and initiator for TOE capable 2015-12-26 06:05:21 +00:00
if_cxgbe Add a 'show t4 tcb <nexus> <tid>' command to dump a TCB from DDB. 2016-04-10 05:06:58 +00:00
if_cxl cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as 2015-02-06 01:10:04 +00:00
iw_cxgbe Finish process of moving the LinuxKPI module into the default kernel build. 2015-10-29 08:28:39 +00:00
t4_firmware cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0. 2016-05-13 17:38:59 +00:00
t5_firmware cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0. 2016-05-13 17:38:59 +00:00
tom Move most of the 15 variations on generating opt_inet.h and 2014-08-04 22:37:02 +00:00
Makefile cxgbei: Hardware accelerated iSCSI target and initiator for TOE capable 2015-12-26 06:05:21 +00:00