freebsd-dev/gnu/usr.bin/as/subsegs.c
1995-05-30 05:05:38 +00:00

312 lines
9.0 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* subsegs.c - subsegments -
Copyright (C) 1987, 1990, 1991, 1992 Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/*
* Segments & sub-segments.
*/
#ifndef lint
static char rcsid[] = "$Id: subsegs.c,v 1.3 1995/03/02 20:29:18 nate Exp $";
#endif
#include "as.h"
#include "subsegs.h"
#include "obstack.h"
#ifdef MANY_SEGMENTS
segment_info_type segment_info[SEG_MAXIMUM_ORDINAL];
frchainS* frchain_root,
* frchain_now;
#else
frchainS* frchain_root,
* frchain_now, /* Commented in "subsegs.h". */
* data0_frchainP;
#endif
char * const /* in: segT out: char* */
seg_name[] = {
"absolute",
#ifdef MANY_SEGMENTS
"e0","e1","e2","e3","e4","e5","e6","e7","e8","e9",
#else
"text",
"data",
"bss",
#endif
"unknown",
"absent",
"pass1",
"ASSEMBLER-INTERNAL-LOGIC-ERROR!",
"bignum/flonum",
"difference",
"debug",
"transfert vector preload",
"transfert vector postload",
"register",
"",
}; /* Used by error reporters, dumpers etc. */
void
subsegs_begin()
{
/* Check table(s) seg_name[], seg_N_TYPE[] is in correct order */
#ifdef MANY_SEGMENTS
#else
know(SEG_ABSOLUTE == 0);
know(SEG_TEXT == 1);
know(SEG_DATA == 2);
know(SEG_BSS == 3);
know(SEG_UNKNOWN == 4);
know(SEG_ABSENT == 5);
know(SEG_PASS1 == 6);
know(SEG_GOOF == 7);
know(SEG_BIG == 8);
know(SEG_DIFFERENCE == 9);
know(SEG_DEBUG == 10);
know(SEG_NTV == 11);
know(SEG_PTV == 12);
know(SEG_REGISTER == 13);
know(SEG_MAXIMUM_ORDINAL == SEG_REGISTER );
/* know(segment_name(SEG_MAXIMUM_ORDINAL + 1)[0] == 0);*/
#endif
obstack_begin(&frags, 5000);
frchain_root = NULL;
frchain_now = NULL; /* Warn new_subseg() that we are booting. */
/* Fake up 1st frag. */
/* It won't be used=> is ok if obstack... */
/* pads the end of it for alignment. */
frag_now=(fragS *)obstack_alloc(&frags,SIZEOF_STRUCT_FRAG);
memset(frag_now, SIZEOF_STRUCT_FRAG, 0);
/* This 1st frag will not be in any frchain. */
/* We simply give subseg_new somewhere to scribble. */
now_subseg = 42; /* Lie for 1st call to subseg_new. */
#ifdef MANY_SEGMENTS
{
int i;
for (i = SEG_E0; i < SEG_UNKNOWN; i++) {
subseg_new(i, 0);
segment_info[i].frchainP = frchain_now;
}
}
#else
subseg_new(SEG_DATA, 0); /* .data 0 */
data0_frchainP = frchain_now;
#endif
}
/*
* subseg_change()
*
* Change the subsegment we are in, BUT DO NOT MAKE A NEW FRAG for the
* subsegment. If we are already in the correct subsegment, change nothing.
* This is used eg as a worker for subseg_new [which does make a new frag_now]
* and for changing segments after we have read the source. We construct eg
* fixSs even after the source file is read, so we do have to keep the
* segment context correct.
*/
void
subseg_change (seg, subseg)
register segT seg;
register int subseg;
{
now_seg = seg;
now_subseg = subseg;
#ifdef MANY_SEGMENTS
seg_fix_rootP = &segment_info[seg].fix_root;
seg_fix_tailP = &segment_info[seg].fix_tail;
#else
if (seg == SEG_DATA) {
seg_fix_rootP = &data_fix_root;
seg_fix_tailP = &data_fix_tail;
} else if (seg == SEG_BSS) {
seg_fix_rootP = &bss_fix_root;
seg_fix_tailP = &bss_fix_tail;
} else {
know (seg == SEG_TEXT);
seg_fix_rootP = &text_fix_root;
seg_fix_tailP = &text_fix_tail;
}
#endif
}
/*
* subseg_new()
*
* If you attempt to change to the current subsegment, nothing happens.
*
* In: segT, subsegT code for new subsegment.
* frag_now -> incomplete frag for current subsegment.
* If frag_now == NULL, then there is no old, incomplete frag, so
* the old frag is not closed off.
*
* Out: now_subseg, now_seg updated.
* Frchain_now points to the (possibly new) struct frchain for this
* sub-segment.
* Frchain_root updated if needed.
*/
void
subseg_new (seg, subseg) /* begin assembly for a new sub-segment */
register segT seg; /* SEG_DATA or SEG_TEXT */
register subsegT subseg;
{
long tmp; /* JF for obstack alignment hacking */
#ifndef MANY_SEGMENTS
know(seg == SEG_DATA || seg == SEG_TEXT || seg == SEG_BSS);
#endif
if (seg != now_seg || subseg != now_subseg)
{ /* we just changed sub-segments */
register frchainS * frcP; /* crawl frchain chain */
register frchainS** lastPP; /* address of last pointer */
frchainS *newP; /* address of new frchain */
register fragS *former_last_fragP;
register fragS *new_fragP;
if (frag_now) /* If not bootstrapping. */
{
frag_now->fr_fix = obstack_next_free(& frags) - frag_now->fr_literal;
frag_wane(frag_now); /* Close off any frag in old subseg. */
}
/*
* It would be nice to keep an obstack for each subsegment, if we swap
* subsegments a lot. Hence we would have much fewer frag_wanes().
*/
{
obstack_finish( &frags);
/*
* If we don't do the above, the next object we put on obstack frags
* will appear to start at the fr_literal of the current frag.
* Also, above ensures that the next object will begin on a
* address that is aligned correctly for the engine that runs
* this program.
*/
}
subseg_change (seg, (int)subseg);
/*
* Attempt to find or make a frchain for that sub seg.
* Crawl along chain of frchainSs, begins @ frchain_root.
* If we need to make a frchainS, link it into correct
* position of chain rooted in frchain_root.
*/
for (frcP = * (lastPP = & frchain_root);
frcP
&& (int)(frcP->frch_seg) <= (int)seg;
frcP = * ( lastPP = & frcP->frch_next)
)
{
if ( (int)(frcP->frch_seg) == (int)seg
&& frcP->frch_subseg >= subseg)
{
break;
}
}
/*
* frcP: Address of the 1st frchainS in correct segment with
* frch_subseg >= subseg.
* We want to either use this frchainS, or we want
* to insert a new frchainS just before it.
*
* If frcP == NULL, then we are at the end of the chain
* of frchainS-s. A NULL frcP means we fell off the end
* of the chain looking for a
* frch_subseg >= subseg, so we
* must make a new frchainS.
*
* If we ever maintain a pointer to
* the last frchainS in the chain, we change that pointer
* ONLY when frcP == NULL.
*
* lastPP: Address of the pointer with value frcP;
* Never NULL.
* May point to frchain_root.
*
*/
if ( ! frcP
|| ( (int)(frcP->frch_seg) > (int)seg
|| frcP->frch_subseg > subseg)) /* Kinky logic only works with 2 segments. */
{
/*
* This should be the only code that creates a frchainS.
*/
newP=(frchainS *)obstack_alloc(&frags,sizeof(frchainS));
memset(newP, sizeof(frchainS), 0);
/* This begines on a good boundary */
/* because a obstack_done() preceeded it. */
/* It implies an obstack_done(), so we */
/* expect the next object allocated to */
/* begin on a correct boundary. */
*lastPP = newP;
newP->frch_next = frcP; /* perhaps NULL */
(frcP = newP)->frch_subseg = subseg;
newP->frch_seg = seg;
newP->frch_last = NULL;
}
/*
* Here with frcP->ing to the frchainS for subseg.
*/
frchain_now = frcP;
/*
* Make a fresh frag for the subsegment.
*/
/* We expect this to happen on a correct */
/* boundary since it was proceeded by a */
/* obstack_done(). */
tmp=obstack_alignment_mask(&frags); /* JF disable alignment */
obstack_alignment_mask(&frags)=0;
frag_now=(fragS *)obstack_alloc(&frags,SIZEOF_STRUCT_FRAG);
obstack_alignment_mask(&frags)=tmp;
/* know(frags.obstack_c_next_free == frag_now->fr_literal); */
/* But we want any more chars to come */
/* immediately after the structure we just made. */
new_fragP = frag_now;
new_fragP->fr_next = NULL;
/*
* Append new frag to current frchain.
*/
former_last_fragP = frcP->frch_last;
if (former_last_fragP)
{
know( former_last_fragP->fr_next == NULL );
know( frchain_now->frch_root );
former_last_fragP->fr_next = new_fragP;
}
else
{
frcP->frch_root = new_fragP;
}
frcP->frch_last = new_fragP;
} /* if (changing subsegments) */
} /* subseg_new() */
/*
* Local Variables:
* comment-column: 0
* fill-column: 131
* End:
*/
/* end of subsegs.c */