freebsd-dev/sys/dev/mii
Pyun YongHyeon fcb62a8b01 Add hack to pass controller specific information to phy driver.
Unlike most other PHYs there is no easy way to know which media
type the PHY supports on Marvell PHYs. MIIF_HAVEFIBER flags is now
passed via bus-specific instance variable of a device. While I'm
here add 88E1112 specific work around to set SIGDET polarity low.
Many thanks "Eugene Perevyazko <john <> dnepro dot net>" who kindly
gave remote access to system with DGE-560SX.
2009-09-28 21:03:28 +00:00
..
acphy.c
acphyreg.h
amphy.c
amphyreg.h
atphy.c Use auto-negotiation for manual media type selection. This fixes 2008-10-25 06:39:17 +00:00
atphyreg.h
axphy.c New PHY driver for the internal PHY found in the AX88790. There's a 2009-03-30 16:01:09 +00:00
axphyreg.h New PHY driver for the internal PHY found in the AX88790. There's a 2009-03-30 16:01:09 +00:00
bmtphy.c
bmtphyreg.h
brgphy.c Restore link state handling which was broken in rev 1.69. 2008-08-12 00:57:39 +00:00
brgphyreg.h
ciphy.c Correct PHY description and OUI of VSC8211. Previously VSC8211 was 2008-10-23 01:27:15 +00:00
ciphyreg.h
e1000phy.c Add hack to pass controller specific information to phy driver. 2009-09-28 21:03:28 +00:00
e1000phyreg.h Add hack to pass controller specific information to phy driver. 2009-09-28 21:03:28 +00:00
exphy.c
gentbi.c
icsphy.c
icsphyreg.h
inphy.c
inphyreg.h
ip1000phy.c For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
ip1000phyreg.h For IP1001 PHYs, read auto-negotiation advertisement register to 2009-03-09 08:17:46 +00:00
jmphy.c
jmphyreg.h
lxtphy.c
lxtphyreg.h
mii_physubr.c
mii.c Revert bogusly committed file. 2008-08-23 07:46:58 +00:00
mii.h
miibus_if.m
miidevs - Also probe DP83865, which is an is an ultra low power version 2009-06-13 23:27:04 +00:00
miivar.h
mlphy.c Move the code that looks for the companion phy to a subroutine to make 2008-08-23 15:50:18 +00:00
nsgphy.c - Also probe DP83865, which is an is an ultra low power version 2009-06-13 23:27:04 +00:00
nsgphyreg.h
nsphy.c
nsphyreg.h
nsphyter.c
nsphyterreg.h
pnaphy.c
qsphy.c
qsphyreg.h
rgephy.c
rgephyreg.h
rlphy.c
rlswitch.c
ruephy.c
ruephyreg.h
smcphy.c
tdkphy.c
tdkphyreg.h
tlphy.c It turns out that my analysis of the error handling here was wrong. 2008-08-23 15:29:28 +00:00
tlphyreg.h
truephy.c Renamed the FRAMELEN macro to TRUEPHY_FRAMELEN as for powerpc 2008-11-28 23:44:13 +00:00
truephyreg.h
ukphy_subr.c
ukphy.c
xmphy.c
xmphyreg.h