freebsd-dev/sys/dev/mpr/mpi/mpi2_tool.h
Kenneth D. Merry 991554f2c4 Bring in the mpr(4) driver for LSI's MPT3 12Gb SAS controllers.
This is derived from the mps(4) driver, but it supports only the 12Gb
IT and IR hardware including the SAS 3004, SAS 3008 and SAS 3108.

Some notes about this driver:
 o The 12Gb hardware can do "FastPath" I/O, and that capability is included in
   this driver.

 o WarpDrive functionality has been removed, since it isn't supported in
   the 12Gb driver interface.

 o The Scatter/Gather list handling code is significantly different between
   the 6Gb and 12Gb hardware.  The 12Gb boards support IEEE Scatter/Gather
   lists.

Thanks to LSI for developing and testing this driver for FreeBSD.

share/man/man4/mpr.4:
	mpr(4) man page.

sys/dev/mpr/*:
	mpr(4) driver files.

sys/modules/Makefile,
sys/modules/mpr/Makefile:
	Add a module Makefile for the mpr(4) driver.

sys/conf/files:
	Add the mpr(4) driver.

sys/amd64/conf/GENERIC,
sys/i386/conf/GENERIC,
sys/mips/conf/OCTEON1,
sys/sparc64/conf/GENERIC:
	Add the mpr(4) driver to all config files that currently
	have the mps(4) driver.

sys/ia64/conf/GENERIC:
	Add the mps(4) and mpr(4) drivers to the ia64 GENERIC
	config file.

sys/i386/conf/XEN:
	Exclude the mpr module from building here.

Submitted by:	Steve McConnell <Stephen.McConnell@lsi.com>
MFC after:	3 days
Tested by:	Chris Reeves <chrisr@spectralogic.com>
Sponsored by:	LSI, Spectra Logic
Relnotes:	LSI 12Gb SAS driver mpr(4) added
2014-05-02 20:25:09 +00:00

547 lines
27 KiB
C

/*-
* Copyright (c) 2013 LSI Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* LSI MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
/*
* Copyright (c) 2000-2013 LSI Corporation.
*
*
* Name: mpi2_tool.h
* Title: MPI diagnostic tool structures and definitions
* Creation Date: March 26, 2007
*
* mpi2_tool.h Version: 02.00.11
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 12-18-07 02.00.01 Added Diagnostic Buffer Post and Diagnostic Release
* structures and defines.
* 02-29-08 02.00.02 Modified various names to make them 32-character unique.
* 05-06-09 02.00.03 Added ISTWI Read Write Tool and Diagnostic CLI Tool.
* 07-30-09 02.00.04 Added ExtendedType field to DiagnosticBufferPost request
* and reply messages.
* Added MPI2_DIAG_BUF_TYPE_EXTENDED.
* Incremented MPI2_DIAG_BUF_TYPE_COUNT.
* 05-12-10 02.00.05 Added Diagnostic Data Upload tool.
* 08-11-10 02.00.06 Added defines that were missing for Diagnostic Buffer
* Post Request.
* 05-25-11 02.00.07 Added Flags field and related defines to
* MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST.
* 11-18-11 02.00.08 Incorporating additions for MPI v2.5.
* 07-10-12 02.00.09 Add MPI v2.5 Toolbox Diagnostic CLI Tool Request
* message.
* 07-26-12 02.00.10 Modified MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST so that
* it uses MPI Chain SGE as well as MPI Simple SGE.
* 08-19-13 02.00.11 Added MPI2_TOOLBOX_TEXT_DISPLAY_TOOL and related info.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_TOOL_H
#define MPI2_TOOL_H
/*****************************************************************************
*
* Toolbox Messages
*
*****************************************************************************/
/* defines for the Tools */
#define MPI2_TOOLBOX_CLEAN_TOOL (0x00)
#define MPI2_TOOLBOX_MEMORY_MOVE_TOOL (0x01)
#define MPI2_TOOLBOX_DIAG_DATA_UPLOAD_TOOL (0x02)
#define MPI2_TOOLBOX_ISTWI_READ_WRITE_TOOL (0x03)
#define MPI2_TOOLBOX_BEACON_TOOL (0x05)
#define MPI2_TOOLBOX_DIAGNOSTIC_CLI_TOOL (0x06)
#define MPI2_TOOLBOX_TEXT_DISPLAY_TOOL (0x07)
/****************************************************************************
* Toolbox reply
****************************************************************************/
typedef struct _MPI2_TOOLBOX_REPLY
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_TOOLBOX_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_REPLY,
Mpi2ToolboxReply_t, MPI2_POINTER pMpi2ToolboxReply_t;
/****************************************************************************
* Toolbox Clean Tool request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_CLEAN_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 Flags; /* 0x0C */
} MPI2_TOOLBOX_CLEAN_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_CLEAN_REQUEST,
Mpi2ToolboxCleanRequest_t, MPI2_POINTER pMpi2ToolboxCleanRequest_t;
/* values for the Flags field */
#define MPI2_TOOLBOX_CLEAN_BOOT_SERVICES (0x80000000)
#define MPI2_TOOLBOX_CLEAN_PERSIST_MANUFACT_PAGES (0x40000000)
#define MPI2_TOOLBOX_CLEAN_OTHER_PERSIST_PAGES (0x20000000)
#define MPI2_TOOLBOX_CLEAN_FW_CURRENT (0x10000000)
#define MPI2_TOOLBOX_CLEAN_FW_BACKUP (0x08000000)
#define MPI2_TOOLBOX_CLEAN_MEGARAID (0x02000000)
#define MPI2_TOOLBOX_CLEAN_INITIALIZATION (0x01000000)
#define MPI2_TOOLBOX_CLEAN_FLASH (0x00000004)
#define MPI2_TOOLBOX_CLEAN_SEEPROM (0x00000002)
#define MPI2_TOOLBOX_CLEAN_NVSRAM (0x00000001)
/****************************************************************************
* Toolbox Memory Move request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_MEM_MOVE_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
MPI2_SGE_SIMPLE_UNION SGL; /* 0x0C */
} MPI2_TOOLBOX_MEM_MOVE_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_MEM_MOVE_REQUEST,
Mpi2ToolboxMemMoveRequest_t, MPI2_POINTER pMpi2ToolboxMemMoveRequest_t;
/****************************************************************************
* Toolbox Diagnostic Data Upload request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U8 SGLFlags; /* 0x0C */
U8 Reserved5; /* 0x0D */
U16 Reserved6; /* 0x0E */
U32 Flags; /* 0x10 */
U32 DataLength; /* 0x14 */
MPI2_SGE_SIMPLE_UNION SGL; /* 0x18 */
} MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_DATA_UPLOAD_REQUEST,
Mpi2ToolboxDiagDataUploadRequest_t,
MPI2_POINTER pMpi2ToolboxDiagDataUploadRequest_t;
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
typedef struct _MPI2_DIAG_DATA_UPLOAD_HEADER
{
U32 DiagDataLength; /* 00h */
U8 FormatCode; /* 04h */
U8 Reserved1; /* 05h */
U16 Reserved2; /* 06h */
} MPI2_DIAG_DATA_UPLOAD_HEADER, MPI2_POINTER PTR_MPI2_DIAG_DATA_UPLOAD_HEADER,
Mpi2DiagDataUploadHeader_t, MPI2_POINTER pMpi2DiagDataUploadHeader_t;
/****************************************************************************
* Toolbox ISTWI Read Write Tool
****************************************************************************/
/* Toolbox ISTWI Read Write Tool request message */
typedef struct _MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 Reserved5; /* 0x0C */
U32 Reserved6; /* 0x10 */
U8 DevIndex; /* 0x14 */
U8 Action; /* 0x15 */
U8 SGLFlags; /* 0x16 */
U8 Flags; /* 0x17 */
U16 TxDataLength; /* 0x18 */
U16 RxDataLength; /* 0x1A */
U32 Reserved8; /* 0x1C */
U32 Reserved9; /* 0x20 */
U32 Reserved10; /* 0x24 */
U32 Reserved11; /* 0x28 */
U32 Reserved12; /* 0x2C */
MPI2_SGE_SIMPLE_UNION SGL; /* 0x30 */
} MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_READ_WRITE_REQUEST,
Mpi2ToolboxIstwiReadWriteRequest_t,
MPI2_POINTER pMpi2ToolboxIstwiReadWriteRequest_t;
/* values for the Action field */
#define MPI2_TOOL_ISTWI_ACTION_READ_DATA (0x01)
#define MPI2_TOOL_ISTWI_ACTION_WRITE_DATA (0x02)
#define MPI2_TOOL_ISTWI_ACTION_SEQUENCE (0x03)
#define MPI2_TOOL_ISTWI_ACTION_RESERVE_BUS (0x10)
#define MPI2_TOOL_ISTWI_ACTION_RELEASE_BUS (0x11)
#define MPI2_TOOL_ISTWI_ACTION_RESET (0x12)
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/* values for the Flags field */
#define MPI2_TOOL_ISTWI_FLAG_AUTO_RESERVE_RELEASE (0x80)
#define MPI2_TOOL_ISTWI_FLAG_PAGE_ADDR_MASK (0x07)
/* Toolbox ISTWI Read Write Tool reply message */
typedef struct _MPI2_TOOLBOX_ISTWI_REPLY
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U8 DevIndex; /* 0x14 */
U8 Action; /* 0x15 */
U8 IstwiStatus; /* 0x16 */
U8 Reserved6; /* 0x17 */
U16 TxDataCount; /* 0x18 */
U16 RxDataCount; /* 0x1A */
} MPI2_TOOLBOX_ISTWI_REPLY, MPI2_POINTER PTR_MPI2_TOOLBOX_ISTWI_REPLY,
Mpi2ToolboxIstwiReply_t, MPI2_POINTER pMpi2ToolboxIstwiReply_t;
/****************************************************************************
* Toolbox Beacon Tool request
****************************************************************************/
typedef struct _MPI2_TOOLBOX_BEACON_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U8 Reserved5; /* 0x0C */
U8 PhysicalPort; /* 0x0D */
U8 Reserved6; /* 0x0E */
U8 Flags; /* 0x0F */
} MPI2_TOOLBOX_BEACON_REQUEST, MPI2_POINTER PTR_MPI2_TOOLBOX_BEACON_REQUEST,
Mpi2ToolboxBeaconRequest_t, MPI2_POINTER pMpi2ToolboxBeaconRequest_t;
/* values for the Flags field */
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_OFF (0x00)
#define MPI2_TOOLBOX_FLAGS_BEACONMODE_ON (0x01)
/****************************************************************************
* Toolbox Diagnostic CLI Tool
****************************************************************************/
#define MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH (0x5C)
/* MPI v2.0 Toolbox Diagnostic CLI Tool request message */
typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U8 SGLFlags; /* 0x0C */
U8 Reserved5; /* 0x0D */
U16 Reserved6; /* 0x0E */
U32 DataLength; /* 0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */
MPI2_MPI_SGE_IO_UNION SGL; /* 0x70 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
MPI2_POINTER PTR_MPI2_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi2ToolboxDiagnosticCliRequest_t,
MPI2_POINTER pMpi2ToolboxDiagnosticCliRequest_t;
/* use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
/* MPI v2.5 Toolbox Diagnostic CLI Tool request message */
typedef struct _MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 Reserved5; /* 0x0C */
U32 DataLength; /* 0x10 */
U8 DiagnosticCliCommand[MPI2_TOOLBOX_DIAG_CLI_CMD_LENGTH]; /* 0x14 */
MPI25_SGE_IO_UNION SGL; /* 0x70 */
} MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
MPI2_POINTER PTR_MPI25_TOOLBOX_DIAGNOSTIC_CLI_REQUEST,
Mpi25ToolboxDiagnosticCliRequest_t,
MPI2_POINTER pMpi25ToolboxDiagnosticCliRequest_t;
/* Toolbox Diagnostic CLI Tool reply message */
typedef struct _MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 ReturnedDataLength; /* 0x14 */
} MPI2_TOOLBOX_DIAGNOSTIC_CLI_REPLY,
MPI2_POINTER PTR_MPI2_TOOLBOX_DIAG_CLI_REPLY,
Mpi2ToolboxDiagnosticCliReply_t,
MPI2_POINTER pMpi2ToolboxDiagnosticCliReply_t;
/****************************************************************************
* Toolbox Console Text Display Tool
****************************************************************************/
/* Toolbox Console Text Display Tool request message */
typedef struct _MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST
{
U8 Tool; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U8 Console; /* 0x0C */
U8 Flags; /* 0x0D */
U16 Reserved6; /* 0x0E */
U8 TextToDisplay[4]; /* 0x10 */ /* actual length determined at runtime based on frame size */
} MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
MPI2_POINTER PTR_MPI2_TOOLBOX_TEXT_DISPLAY_REQUEST,
Mpi2ToolboxTextDisplayRequest_t,
MPI2_POINTER pMpi2ToolboxTextDisplayRequest_t;
/* defines for the Console field */
#define MPI2_TOOLBOX_CONSOLE_TYPE_MASK (0xF0)
#define MPI2_TOOLBOX_CONSOLE_TYPE_DEFAULT (0x00)
#define MPI2_TOOLBOX_CONSOLE_TYPE_UART (0x10)
#define MPI2_TOOLBOX_CONSOLE_TYPE_ETHERNET (0x20)
#define MPI2_TOOLBOX_CONSOLE_NUMBER_MASK (0x0F)
/* defines for the Flags field */
#define MPI2_TOOLBOX_CONSOLE_FLAG_TIMESTAMP (0x01)
/*****************************************************************************
*
* Diagnostic Buffer Messages
*
*****************************************************************************/
/****************************************************************************
* Diagnostic Buffer Post request
****************************************************************************/
typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
{
U8 ExtendedType; /* 0x00 */
U8 BufferType; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U64 BufferAddress; /* 0x0C */
U32 BufferLength; /* 0x14 */
U32 Reserved5; /* 0x18 */
U32 Reserved6; /* 0x1C */
U32 Flags; /* 0x20 */
U32 ProductSpecific[23]; /* 0x24 */
} MPI2_DIAG_BUFFER_POST_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REQUEST,
Mpi2DiagBufferPostRequest_t, MPI2_POINTER pMpi2DiagBufferPostRequest_t;
/* values for the ExtendedType field */
#define MPI2_DIAG_EXTENDED_TYPE_UTILIZATION (0x02)
/* values for the BufferType field */
#define MPI2_DIAG_BUF_TYPE_TRACE (0x00)
#define MPI2_DIAG_BUF_TYPE_SNAPSHOT (0x01)
#define MPI2_DIAG_BUF_TYPE_EXTENDED (0x02)
/* count of the number of buffer types */
#define MPI2_DIAG_BUF_TYPE_COUNT (0x03)
/* values for the Flags field */
#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL (0x00000002) /* for MPI v2.0 products only */
#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE (0x00000001)
/****************************************************************************
* Diagnostic Buffer Post reply
****************************************************************************/
typedef struct _MPI2_DIAG_BUFFER_POST_REPLY
{
U8 ExtendedType; /* 0x00 */
U8 BufferType; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 TransferLength; /* 0x14 */
} MPI2_DIAG_BUFFER_POST_REPLY, MPI2_POINTER PTR_MPI2_DIAG_BUFFER_POST_REPLY,
Mpi2DiagBufferPostReply_t, MPI2_POINTER pMpi2DiagBufferPostReply_t;
/****************************************************************************
* Diagnostic Release request
****************************************************************************/
typedef struct _MPI2_DIAG_RELEASE_REQUEST
{
U8 Reserved1; /* 0x00 */
U8 BufferType; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
} MPI2_DIAG_RELEASE_REQUEST, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REQUEST,
Mpi2DiagReleaseRequest_t, MPI2_POINTER pMpi2DiagReleaseRequest_t;
/****************************************************************************
* Diagnostic Buffer Post reply
****************************************************************************/
typedef struct _MPI2_DIAG_RELEASE_REPLY
{
U8 Reserved1; /* 0x00 */
U8 BufferType; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_DIAG_RELEASE_REPLY, MPI2_POINTER PTR_MPI2_DIAG_RELEASE_REPLY,
Mpi2DiagReleaseReply_t, MPI2_POINTER pMpi2DiagReleaseReply_t;
#endif