154 lines
5.0 KiB
Plaintext
154 lines
5.0 KiB
Plaintext
<!-- $Id: m_diskless.sgml,v 1.1 1995/04/10 02:36:01 jfieber Exp $ -->
|
|
<!-- The FreeBSD Documentation Project -->
|
|
|
|
<sect><heading>Diskless operation</heading>
|
|
|
|
<p><em>Contributed by &a.martin;.</em>
|
|
|
|
<tt>netboot.com/netboot.rom</tt> allow you to boot your
|
|
FreeBSD machine over the network and run FreeBSD without
|
|
having a disk on your client. Under 2.0 it is now
|
|
possible to have local swap. Swapping over NFS is also
|
|
still supported.
|
|
|
|
Supported Ethernet cards include: Western Digital/SMC
|
|
8003, 8013, 8216 and compatibles; NE1000/NE2000 and
|
|
compatibles (requires recompile)
|
|
|
|
<sect1>
|
|
<heading>Setup Instructions</heading>
|
|
|
|
<p><enum>
|
|
<item> Find a machine that will be your server. This
|
|
machine will require enough disk space to hold the
|
|
FreeBSD 2.0 binaries and have bootp, tftp and NFS
|
|
services available.
|
|
|
|
Tested machines:
|
|
<itemize>
|
|
<item>HP9000/8xx running HP-UX 9.04 or later (pre
|
|
9.04 doesn't work)</item>
|
|
<item>Sun/Solaries 2.3. (you may need to get
|
|
bootp)</item>
|
|
</itemize>
|
|
|
|
<item>Set up a bootp server to provide the client with
|
|
IP, gateway, netmask.
|
|
<tscreen><verb>
|
|
diskless:\
|
|
:ht=ether:\
|
|
:ha=0000c01f848a:\
|
|
:sm=255.255.255.0:\
|
|
:hn:\
|
|
:ds=192.1.2.3:\
|
|
:ip=192.1.2.4:\
|
|
:gw=192.1.2.5:\
|
|
:vm=rfc1048:
|
|
</verb></tscreen></item>
|
|
|
|
<item>Set up a TFTP server (on same machine as bootp
|
|
server) to provide booting information to client.
|
|
The name of this file is <tt>cfg.X.X.X.X</tt> (or
|
|
<tt>/tftpboot/cfg.X.X.X.X</tt>, it will try both)
|
|
where <tt>X.X.X.X</tt> is the IP address of the
|
|
client. The contents of this file can be any valid
|
|
netboot commands. Under 2.0, netboot has the
|
|
following commands:
|
|
<tscreen><verb>
|
|
help - print help list
|
|
ip <X.X.X.X> - print/set client's IP address
|
|
server <X.X.X.X> - print/set bootp/tftp server address
|
|
netmask <X.X.X.X> - print/set netmask
|
|
hostname <name> - print/set hostname
|
|
kernel <name> - print/set kernel name
|
|
rootfs <ip:/fs> - print/set rootfilesystem
|
|
swapfs <ip:/fs> - print/set swapfilesystem
|
|
swapsize <size> - set diskless swapsize in Kbytes
|
|
diskboot - boot from disk
|
|
autoboot - continue boot process
|
|
</verb></tscreen>
|
|
A typical completely diskless cfg file might contain:
|
|
<tscreen><verb>
|
|
rootfs 192.1.2.3:/rootfs/myclient
|
|
swapfs 192.1.2.3:/swapfs
|
|
swapsize 20000
|
|
hostname myclient.mydomain
|
|
</verb></tscreen>
|
|
A cfg file for a machine with local swap might contain:
|
|
<tscreen><verb>
|
|
rootfs 192.1.2.3:/rootfs/myclient
|
|
hostname myclient.mydomain
|
|
</verb></tscreen>
|
|
|
|
<item>Ensure that your NFS server has exported the root
|
|
(and swap if applicable) filesystems to your client,
|
|
and that the client has root access to these
|
|
filesystems
|
|
|
|
A typical <tt>/etc/exports</tt> file on FreeBSD might
|
|
look like:
|
|
<tscreen><verb>
|
|
/rootfs/myclient -maproot=0:0 myclient.mydomain
|
|
/swapfs -maproot=0:0 myclient.mydomain
|
|
</verb></tscreen>
|
|
|
|
And on HP-UX:
|
|
<tscreen><verb>
|
|
/rootfs/myclient -root=myclient.mydomain
|
|
/swapfs -root=myclient.mydomain
|
|
</verb></tscreen>
|
|
|
|
<item>If you are swapping over NFS (completely diskless
|
|
configuration) create a swap file for your client
|
|
using touch. If your <tt>swapfs</tt> command has the
|
|
argument <tt>/swapfs</tt> as in the example above,
|
|
the swapfile for myclient will be called
|
|
<tt>/swapfs/swap.X.X.X.X</tt> where <tt>X.X.X.X</tt>
|
|
is the client's IP addr, eg:
|
|
<tscreen><verb>
|
|
# touch /swapfs/swap.192.1.2.4
|
|
</verb></tscreen>
|
|
|
|
<item> Unpack the root filesystem in the directory the
|
|
client will use for its root filesystem
|
|
(<tt>/rootfs/myclient</tt> in the example above).
|
|
|
|
<itemize>
|
|
|
|
<item> On HP-UX systems: The server should be
|
|
running HP-UX 9.04 or later for HP9000/800 series
|
|
machines. Prior versions don't allow the
|
|
creation of device files over NFS.
|
|
|
|
<item> When extracting <tt>/dev</tt> in
|
|
<tt>/rootfs/myclient</tt>, beware that some
|
|
systems (HPUX) will not create device files that
|
|
FreeBSD is happy with. You may have to go to
|
|
single user mode on the first bootup (press
|
|
control-c during the bootup phase), cd
|
|
<tt>/dev</tt> and do a "<tt>sh ./MAKEDEV
|
|
all</tt>" from the client to fix this.
|
|
</itemize>
|
|
|
|
<item>Run <tt>netboot.com</tt> on the client or make an EPROM
|
|
from the <tt>netboot.rom</tt> file
|
|
</enum>
|
|
|
|
<sect1>
|
|
<heading>Using Shared <tt>/</tt> and <tt>/usr</tt> filesystems</heading>
|
|
|
|
<p>At present there isn't an officially sanctioned way of
|
|
doing this, although I have been using a shared <tt>/usr</tt>
|
|
filesystem and individual <tt>/</tt> filesystems for each client.
|
|
If anyone has any suggestions on how to do this cleanly,
|
|
please let me and/or the core group know.
|
|
|
|
<sect1>
|
|
<heading>Compiling netboot for specific setups</heading>
|
|
|
|
<p>Netboot can be compiled to support NE1000/2000 cards by
|
|
changing the configuration in
|
|
<tt>/sys/i386/boot/netboot/Makefile</tt>. See the
|
|
comments at the top of this file.
|
|
|