c9bbc3ef29
Move definitions from cpuregs.h into the cca.h, and include cca.h into vm.h. This is required to make MIPS MD memattr definitions usable in userspace. Sponsored by: The FreeBSD Foundation, Mellanox Technologies MFC after: 1 week Differential revision: https://reviews.freebsd.org/D15583
646 lines
24 KiB
C
646 lines
24 KiB
C
/* $NetBSD: cpuregs.h,v 1.70 2006/05/15 02:26:54 simonb Exp $ */
|
|
|
|
/*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*
|
|
* Copyright (c) 1992, 1993
|
|
* The Regents of the University of California. All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to Berkeley by
|
|
* Ralph Campbell and Rick Macklem.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @(#)machConst.h 8.1 (Berkeley) 6/10/93
|
|
*
|
|
* machConst.h --
|
|
*
|
|
* Machine dependent constants.
|
|
*
|
|
* Copyright (C) 1989 Digital Equipment Corporation.
|
|
* Permission to use, copy, modify, and distribute this software and
|
|
* its documentation for any purpose and without fee is hereby granted,
|
|
* provided that the above copyright notice appears in all copies.
|
|
* Digital Equipment Corporation makes no representations about the
|
|
* suitability of this software for any purpose. It is provided "as is"
|
|
* without express or implied warranty.
|
|
*
|
|
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h,
|
|
* v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL)
|
|
* from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h,
|
|
* v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL)
|
|
* from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h,
|
|
* v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL)
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef _MIPS_CPUREGS_H_
|
|
#define _MIPS_CPUREGS_H_
|
|
|
|
#ifndef _KVM_MINIDUMP
|
|
#include <machine/cca.h>
|
|
#endif
|
|
|
|
/*
|
|
* Address space.
|
|
* 32-bit mips CPUS partition their 32-bit address space into four segments:
|
|
*
|
|
* kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped
|
|
* kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped
|
|
* kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped
|
|
* kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped
|
|
*
|
|
* Caching of mapped addresses is controlled by bits in the TLB entry.
|
|
*/
|
|
|
|
#define MIPS_KSEG0_LARGEST_PHYS (0x20000000)
|
|
#define MIPS_KSEG0_PHYS_MASK (0x1fffffff)
|
|
#define MIPS_XKPHYS_LARGEST_PHYS (0x10000000000) /* 40 bit PA */
|
|
#define MIPS_XKPHYS_PHYS_MASK (0x0ffffffffff)
|
|
|
|
#ifndef LOCORE
|
|
#define MIPS_KUSEG_START 0x00000000
|
|
#define MIPS_KSEG0_START ((intptr_t)(int32_t)0x80000000)
|
|
#define MIPS_KSEG0_END ((intptr_t)(int32_t)0x9fffffff)
|
|
#define MIPS_KSEG1_START ((intptr_t)(int32_t)0xa0000000)
|
|
#define MIPS_KSEG1_END ((intptr_t)(int32_t)0xbfffffff)
|
|
#define MIPS_KSSEG_START ((intptr_t)(int32_t)0xc0000000)
|
|
#define MIPS_KSSEG_END ((intptr_t)(int32_t)0xdfffffff)
|
|
#define MIPS_KSEG3_START ((intptr_t)(int32_t)0xe0000000)
|
|
#define MIPS_KSEG3_END ((intptr_t)(int32_t)0xffffffff)
|
|
#define MIPS_KSEG2_START MIPS_KSSEG_START
|
|
#define MIPS_KSEG2_END MIPS_KSSEG_END
|
|
#endif
|
|
|
|
#define MIPS_PHYS_TO_KSEG0(x) ((uintptr_t)(x) | MIPS_KSEG0_START)
|
|
#define MIPS_PHYS_TO_KSEG1(x) ((uintptr_t)(x) | MIPS_KSEG1_START)
|
|
#define MIPS_KSEG0_TO_PHYS(x) ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK)
|
|
#define MIPS_KSEG1_TO_PHYS(x) ((uintptr_t)(x) & MIPS_KSEG0_PHYS_MASK)
|
|
|
|
#define MIPS_IS_KSEG0_ADDR(x) \
|
|
(((vm_offset_t)(x) >= MIPS_KSEG0_START) && \
|
|
((vm_offset_t)(x) <= MIPS_KSEG0_END))
|
|
#define MIPS_IS_KSEG1_ADDR(x) \
|
|
(((vm_offset_t)(x) >= MIPS_KSEG1_START) && \
|
|
((vm_offset_t)(x) <= MIPS_KSEG1_END))
|
|
#define MIPS_IS_VALID_PTR(x) (MIPS_IS_KSEG0_ADDR(x) || \
|
|
MIPS_IS_KSEG1_ADDR(x))
|
|
|
|
#define MIPS_PHYS_TO_XKPHYS(cca,x) \
|
|
((0x2ULL << 62) | ((unsigned long long)(cca) << 59) | (x))
|
|
#define MIPS_PHYS_TO_XKPHYS_CACHED(x) \
|
|
((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_CACHED) << 59) | (x))
|
|
#define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \
|
|
((0x2ULL << 62) | ((unsigned long long)(MIPS_CCA_UNCACHED) << 59) | (x))
|
|
|
|
#define MIPS_XKPHYS_TO_PHYS(x) ((uintptr_t)(x) & MIPS_XKPHYS_PHYS_MASK)
|
|
|
|
#define MIPS_XKPHYS_START 0x8000000000000000
|
|
#define MIPS_XKPHYS_END 0xbfffffffffffffff
|
|
#define MIPS_XUSEG_START 0x0000000000000000
|
|
#define MIPS_XUSEG_END 0x0000010000000000
|
|
#define MIPS_XKSEG_START 0xc000000000000000
|
|
#define MIPS_XKSEG_END 0xc00000ff80000000
|
|
#define MIPS_XKSEG_COMPAT32_START 0xffffffff80000000
|
|
#define MIPS_XKSEG_COMPAT32_END 0xffffffffffffffff
|
|
#define MIPS_XKSEG_TO_COMPAT32(va) ((va) & 0xffffffff)
|
|
|
|
#ifdef __mips_n64
|
|
#define MIPS_DIRECT_MAPPABLE(pa) 1
|
|
#define MIPS_PHYS_TO_DIRECT(pa) MIPS_PHYS_TO_XKPHYS_CACHED(pa)
|
|
#define MIPS_PHYS_TO_DIRECT_UNCACHED(pa) MIPS_PHYS_TO_XKPHYS_UNCACHED(pa)
|
|
#define MIPS_DIRECT_TO_PHYS(va) MIPS_XKPHYS_TO_PHYS(va)
|
|
#else
|
|
#define MIPS_DIRECT_MAPPABLE(pa) ((pa) < MIPS_KSEG0_LARGEST_PHYS)
|
|
#define MIPS_PHYS_TO_DIRECT(pa) MIPS_PHYS_TO_KSEG0(pa)
|
|
#define MIPS_PHYS_TO_DIRECT_UNCACHED(pa) MIPS_PHYS_TO_KSEG1(pa)
|
|
#define MIPS_DIRECT_TO_PHYS(va) MIPS_KSEG0_TO_PHYS(va)
|
|
#endif
|
|
|
|
/* CPU dependent mtc0 hazard hook */
|
|
#if defined(CPU_CNMIPS) || defined(CPU_RMI)
|
|
#define COP0_SYNC
|
|
#elif defined(CPU_NLM)
|
|
#define COP0_SYNC .word 0xc0 /* ehb */
|
|
#elif defined(CPU_SB1)
|
|
#define COP0_SYNC ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop; ssnop
|
|
#elif defined(CPU_MIPS24K) || defined(CPU_MIPS34K) || \
|
|
defined(CPU_MIPS74K) || defined(CPU_MIPS1004K) || \
|
|
defined(CPU_MIPS1074K) || defined(CPU_INTERAPTIV) || \
|
|
defined(CPU_PROAPTIV)
|
|
/*
|
|
* According to MIPS32tm Architecture for Programmers, Vol.II, rev. 2.00:
|
|
* "As EHB becomes standard in MIPS implementations, the previous SSNOPs can be
|
|
* removed, leaving only the EHB".
|
|
* Also, all MIPS32 Release 2 implementations have the EHB instruction, which
|
|
* resolves all execution hazards. The same goes for MIPS32 Release 3.
|
|
*/
|
|
#define COP0_SYNC .word 0xc0 /* ehb */
|
|
#else
|
|
/*
|
|
* Pick a reasonable default based on the "typical" spacing described in the
|
|
* "CP0 Hazards" chapter of MIPS Architecture Book Vol III.
|
|
*/
|
|
#define COP0_SYNC ssnop; ssnop; ssnop; ssnop; .word 0xc0;
|
|
#endif
|
|
#define COP0_HAZARD_FPUENABLE nop; nop; nop; nop;
|
|
|
|
/*
|
|
* The bits in the cause register.
|
|
*
|
|
* Bits common to r3000 and r4000:
|
|
*
|
|
* MIPS_CR_BR_DELAY Exception happened in branch delay slot.
|
|
* MIPS_CR_COP_ERR Coprocessor error.
|
|
* MIPS_CR_IP Interrupt pending bits defined below.
|
|
* (same meaning as in CAUSE register).
|
|
* MIPS_CR_EXC_CODE The exception type (see exception codes below).
|
|
*
|
|
* Differences:
|
|
* r3k has 4 bits of execption type, r4k has 5 bits.
|
|
*/
|
|
#define MIPS_CR_BR_DELAY 0x80000000
|
|
#define MIPS_CR_COP_ERR 0x30000000
|
|
#define MIPS_CR_EXC_CODE 0x0000007C /* five bits */
|
|
#define MIPS_CR_IP 0x0000FF00
|
|
#define MIPS_CR_EXC_CODE_SHIFT 2
|
|
#define MIPS_CR_COP_ERR_SHIFT 28
|
|
|
|
/*
|
|
* The bits in the status register. All bits are active when set to 1.
|
|
*
|
|
* R3000 status register fields:
|
|
* MIPS_SR_COP_USABILITY Control the usability of the four coprocessors.
|
|
* MIPS_SR_TS TLB shutdown.
|
|
*
|
|
* MIPS_SR_INT_IE Master (current) interrupt enable bit.
|
|
*
|
|
* Differences:
|
|
* r3k has cache control is via frobbing SR register bits, whereas the
|
|
* r4k cache control is via explicit instructions.
|
|
* r3k has a 3-entry stack of kernel/user bits, whereas the
|
|
* r4k has kernel/supervisor/user.
|
|
*/
|
|
#define MIPS_SR_COP_USABILITY 0xf0000000
|
|
#define MIPS_SR_COP_0_BIT 0x10000000
|
|
#define MIPS_SR_COP_1_BIT 0x20000000
|
|
#define MIPS_SR_COP_2_BIT 0x40000000
|
|
|
|
/* r4k and r3k differences, see below */
|
|
|
|
#define MIPS_SR_MX 0x01000000 /* MIPS64 */
|
|
#define MIPS_SR_PX 0x00800000 /* MIPS64 */
|
|
#define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */
|
|
#define MIPS_SR_TS 0x00200000
|
|
#define MIPS_SR_DE 0x00010000
|
|
|
|
#define MIPS_SR_INT_IE 0x00000001
|
|
/*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */
|
|
#define MIPS_SR_INT_MASK 0x0000ff00
|
|
|
|
/*
|
|
* R4000 status register bit definitons,
|
|
* where different from r2000/r3000.
|
|
*/
|
|
#define MIPS_SR_XX 0x80000000
|
|
#define MIPS_SR_RP 0x08000000
|
|
#define MIPS_SR_FR 0x04000000
|
|
#define MIPS_SR_RE 0x02000000
|
|
|
|
#define MIPS_SR_DIAG_DL 0x01000000 /* QED 52xx */
|
|
#define MIPS_SR_DIAG_IL 0x00800000 /* QED 52xx */
|
|
#define MIPS_SR_SR 0x00100000
|
|
#define MIPS_SR_NMI 0x00080000 /* MIPS32/64 */
|
|
#define MIPS_SR_DIAG_CH 0x00040000
|
|
#define MIPS_SR_DIAG_CE 0x00020000
|
|
#define MIPS_SR_DIAG_PE 0x00010000
|
|
#define MIPS_SR_EIE 0x00010000 /* TX79/R5900 */
|
|
#define MIPS_SR_KX 0x00000080
|
|
#define MIPS_SR_SX 0x00000040
|
|
#define MIPS_SR_UX 0x00000020
|
|
#define MIPS_SR_KSU_MASK 0x00000018
|
|
#define MIPS_SR_KSU_USER 0x00000010
|
|
#define MIPS_SR_KSU_SUPER 0x00000008
|
|
#define MIPS_SR_KSU_KERNEL 0x00000000
|
|
#define MIPS_SR_ERL 0x00000004
|
|
#define MIPS_SR_EXL 0x00000002
|
|
|
|
/*
|
|
* The interrupt masks.
|
|
* If a bit in the mask is 1 then the interrupt is enabled (or pending).
|
|
*/
|
|
#define MIPS_INT_MASK 0xff00
|
|
#define MIPS_INT_MASK_5 0x8000
|
|
#define MIPS_INT_MASK_4 0x4000
|
|
#define MIPS_INT_MASK_3 0x2000
|
|
#define MIPS_INT_MASK_2 0x1000
|
|
#define MIPS_INT_MASK_1 0x0800
|
|
#define MIPS_INT_MASK_0 0x0400
|
|
#define MIPS_HARD_INT_MASK 0xfc00
|
|
#define MIPS_SOFT_INT_MASK_1 0x0200
|
|
#define MIPS_SOFT_INT_MASK_0 0x0100
|
|
|
|
/*
|
|
* The bits in the MIPS3 config register.
|
|
*
|
|
* bit 0..5: R/W, Bit 6..31: R/O
|
|
*/
|
|
|
|
/* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */
|
|
#define MIPS_CONFIG_K0_MASK 0x00000007
|
|
|
|
/*
|
|
* R/W Update on Store Conditional
|
|
* 0: Store Conditional uses coherency algorithm specified by TLB
|
|
* 1: Store Conditional uses cacheable coherent update on write
|
|
*/
|
|
#define MIPS_CONFIG_CU 0x00000008
|
|
|
|
#define MIPS_CONFIG_DB 0x00000010 /* Primary D-cache line size */
|
|
#define MIPS_CONFIG_IB 0x00000020 /* Primary I-cache line size */
|
|
#define MIPS_CONFIG_CACHE_L1_LSIZE(config, bit) \
|
|
(((config) & (bit)) ? 32 : 16)
|
|
|
|
#define MIPS_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */
|
|
#define MIPS_CONFIG_DC_SHIFT 6
|
|
#define MIPS_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */
|
|
#define MIPS_CONFIG_IC_SHIFT 9
|
|
#define MIPS_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */
|
|
|
|
/* Cache size mode indication: available only on Vr41xx CPUs */
|
|
#define MIPS_CONFIG_CS 0x00001000
|
|
#define MIPS_CONFIG_C_4100BASE 0x0400 /* base is 2^10 if CS=1 */
|
|
#define MIPS_CONFIG_CACHE_SIZE(config, mask, base, shift) \
|
|
((base) << (((config) & (mask)) >> (shift)))
|
|
|
|
/* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */
|
|
#define MIPS_CONFIG_SE 0x00001000
|
|
|
|
/* Block ordering: 0: sequential, 1: sub-block */
|
|
#define MIPS_CONFIG_EB 0x00002000
|
|
|
|
/* ECC mode - 0: ECC mode, 1: parity mode */
|
|
#define MIPS_CONFIG_EM 0x00004000
|
|
|
|
/* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */
|
|
#define MIPS_CONFIG_BE 0x00008000
|
|
|
|
/* Dirty Shared coherency state - 0: enabled, 1: disabled */
|
|
#define MIPS_CONFIG_SM 0x00010000
|
|
|
|
/* Secondary Cache - 0: present, 1: not present */
|
|
#define MIPS_CONFIG_SC 0x00020000
|
|
|
|
/* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */
|
|
#define MIPS_CONFIG_EW_MASK 0x000c0000
|
|
#define MIPS_CONFIG_EW_SHIFT 18
|
|
|
|
/* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */
|
|
#define MIPS_CONFIG_SW 0x00100000
|
|
|
|
/* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */
|
|
#define MIPS_CONFIG_SS 0x00200000
|
|
|
|
/* Secondary Cache line size */
|
|
#define MIPS_CONFIG_SB_MASK 0x00c00000
|
|
#define MIPS_CONFIG_SB_SHIFT 22
|
|
#define MIPS_CONFIG_CACHE_L2_LSIZE(config) \
|
|
(0x10 << (((config) & MIPS_CONFIG_SB_MASK) >> MIPS_CONFIG_SB_SHIFT))
|
|
|
|
/* Write back data rate */
|
|
#define MIPS_CONFIG_EP_MASK 0x0f000000
|
|
#define MIPS_CONFIG_EP_SHIFT 24
|
|
|
|
/* System clock ratio - this value is CPU dependent */
|
|
#define MIPS_CONFIG_EC_MASK 0x70000000
|
|
#define MIPS_CONFIG_EC_SHIFT 28
|
|
|
|
/* Master-Checker Mode - 1: enabled */
|
|
#define MIPS_CONFIG_CM 0x80000000
|
|
|
|
/*
|
|
* The bits in the MIPS4 config register.
|
|
*/
|
|
|
|
/*
|
|
* Location of exception vectors.
|
|
*
|
|
* Common vectors: reset and UTLB miss.
|
|
*/
|
|
#define MIPS_RESET_EXC_VEC ((intptr_t)(int32_t)0xBFC00000)
|
|
#define MIPS_UTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000000)
|
|
|
|
/*
|
|
* MIPS-III exception vectors
|
|
*/
|
|
#define MIPS_XTLB_MISS_EXC_VEC ((intptr_t)(int32_t)0x80000080)
|
|
#define MIPS_CACHE_ERR_EXC_VEC ((intptr_t)(int32_t)0x80000100)
|
|
#define MIPS_GEN_EXC_VEC ((intptr_t)(int32_t)0x80000180)
|
|
|
|
/*
|
|
* MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector.
|
|
*/
|
|
#define MIPS_INTR_EXC_VEC 0x80000200
|
|
|
|
/*
|
|
* Coprocessor 0 registers:
|
|
*
|
|
* v--- width for mips I,III,32,64
|
|
* (3=32bit, 6=64bit, i=impl dep)
|
|
* 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index.
|
|
* 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random.
|
|
* 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low.
|
|
* 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended.
|
|
* 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context.
|
|
* 4/2 MIPS_COP_0_USERLOCAL ..36 UserLocal.
|
|
* 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register.
|
|
* 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number.
|
|
* 7 MIPS_COP_0_HWRENA ..33 rdHWR Enable.
|
|
* 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address.
|
|
* 9 MIPS_COP_0_COUNT .333 Count register.
|
|
* 10 MIPS_COP_0_TLB_HI 3636 TLB entry high.
|
|
* 11 MIPS_COP_0_COMPARE .333 Compare (against Count).
|
|
* 12 MIPS_COP_0_STATUS 3333 Status register.
|
|
* 12/1 MIPS_COP_0_INTCTL ..33 Interrupt setup (MIPS32/64 r2).
|
|
* 13 MIPS_COP_0_CAUSE 3333 Exception cause register.
|
|
* 14 MIPS_COP_0_EXC_PC 3636 Exception PC.
|
|
* 15 MIPS_COP_0_PRID 3333 Processor revision identifier.
|
|
* 16 MIPS_COP_0_CONFIG 3333 Configuration register.
|
|
* 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1.
|
|
* 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2.
|
|
* 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3.
|
|
* 16/4 MIPS_COP_0_CONFIG4 ..33 Configuration register 4.
|
|
* 17 MIPS_COP_0_LLADDR .336 Load Linked Address.
|
|
* 18 MIPS_COP_0_WATCH_LO .336 WatchLo register.
|
|
* 19 MIPS_COP_0_WATCH_HI .333 WatchHi register.
|
|
* 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register.
|
|
* 23 MIPS_COP_0_DEBUG .... Debug JTAG register.
|
|
* 24 MIPS_COP_0_DEPC .... DEPC JTAG register.
|
|
* 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register.
|
|
* 26 MIPS_COP_0_ECC .3ii ECC / Error Control register.
|
|
* 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register.
|
|
* 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr).
|
|
* 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr).
|
|
* 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data).
|
|
* 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data).
|
|
* 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr).
|
|
* 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr).
|
|
* 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data).
|
|
* 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data).
|
|
* 30 MIPS_COP_0_ERROR_PC .636 Error EPC register.
|
|
* 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register.
|
|
*/
|
|
|
|
/* Deal with inclusion from an assembly file. */
|
|
#if defined(_LOCORE) || defined(LOCORE)
|
|
#define _(n) $n
|
|
#else
|
|
#define _(n) n
|
|
#endif
|
|
|
|
|
|
#define MIPS_COP_0_TLB_INDEX _(0)
|
|
#define MIPS_COP_0_TLB_RANDOM _(1)
|
|
/* Name and meaning of TLB bits for $2 differ on r3k and r4k. */
|
|
|
|
#define MIPS_COP_0_TLB_CONTEXT _(4)
|
|
/* $5 and $6 new with MIPS-III */
|
|
#define MIPS_COP_0_BAD_VADDR _(8)
|
|
#define MIPS_COP_0_TLB_HI _(10)
|
|
#define MIPS_COP_0_STATUS _(12)
|
|
#define MIPS_COP_0_CAUSE _(13)
|
|
#define MIPS_COP_0_EXC_PC _(14)
|
|
#define MIPS_COP_0_PRID _(15)
|
|
|
|
/* MIPS-III */
|
|
#define MIPS_COP_0_TLB_LO0 _(2)
|
|
#define MIPS_COP_0_TLB_LO1 _(3)
|
|
|
|
#define MIPS_COP_0_TLB_PG_MASK _(5)
|
|
#define MIPS_COP_0_TLB_WIRED _(6)
|
|
|
|
#define MIPS_COP_0_COUNT _(9)
|
|
#define MIPS_COP_0_COMPARE _(11)
|
|
#ifdef CPU_XBURST
|
|
#define MIPS_COP_0_XBURST_C12 _(12)
|
|
#endif
|
|
#define MIPS_COP_0_CONFIG _(16)
|
|
#define MIPS_COP_0_LLADDR _(17)
|
|
#define MIPS_COP_0_WATCH_LO _(18)
|
|
#define MIPS_COP_0_WATCH_HI _(19)
|
|
#define MIPS_COP_0_TLB_XCONTEXT _(20)
|
|
#ifdef CPU_XBURST
|
|
#define MIPS_COP_0_XBURST_MBOX _(20)
|
|
#endif
|
|
|
|
#define MIPS_COP_0_ECC _(26)
|
|
#define MIPS_COP_0_CACHE_ERR _(27)
|
|
#define MIPS_COP_0_TAG_LO _(28)
|
|
#define MIPS_COP_0_TAG_HI _(29)
|
|
#define MIPS_COP_0_ERROR_PC _(30)
|
|
|
|
/* MIPS32/64 */
|
|
#define MIPS_COP_0_USERLOCAL _(4) /* sel 2 is userlevel register */
|
|
#define MIPS_COP_0_HWRENA _(7)
|
|
#define MIPS_COP_0_INTCTL _(12)
|
|
#define MIPS_COP_0_DEBUG _(23)
|
|
#define MIPS_COP_0_DEPC _(24)
|
|
#define MIPS_COP_0_PERFCNT _(25)
|
|
#define MIPS_COP_0_DATA_LO _(28)
|
|
#define MIPS_COP_0_DATA_HI _(29)
|
|
#define MIPS_COP_0_DESAVE _(31)
|
|
|
|
/* MIPS32 Config register definitions */
|
|
#define MIPS_MMU_NONE 0x00 /* No MMU present */
|
|
#define MIPS_MMU_TLB 0x01 /* Standard TLB */
|
|
#define MIPS_MMU_BAT 0x02 /* Standard BAT */
|
|
#define MIPS_MMU_FIXED 0x03 /* Standard fixed mapping */
|
|
|
|
/*
|
|
* IntCtl Register Fields
|
|
*/
|
|
#define MIPS_INTCTL_IPTI_MASK 0xE0000000 /* bits 31..29 timer intr # */
|
|
#define MIPS_INTCTL_IPTI_SHIFT 29
|
|
#define MIPS_INTCTL_IPPCI_MASK 0x1C000000 /* bits 26..29 perf counter intr # */
|
|
#define MIPS_INTCTL_IPPCI_SHIFT 26
|
|
#define MIPS_INTCTL_VS_MASK 0x000001F0 /* bits 5..9 vector spacing */
|
|
#define MIPS_INTCTL_VS_SHIFT 4
|
|
|
|
/*
|
|
* Config Register Fields
|
|
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.39)
|
|
*/
|
|
#define MIPS_CONFIG0_M 0x80000000 /* Flag: Config1 is present. */
|
|
#define MIPS_CONFIG0_MT_MASK 0x00000380 /* bits 9..7 MMU Type */
|
|
#define MIPS_CONFIG0_MT_SHIFT 7
|
|
#define MIPS_CONFIG0_BE 0x00008000 /* data is big-endian */
|
|
#define MIPS_CONFIG0_VI 0x00000008 /* inst cache is virtual */
|
|
|
|
/*
|
|
* Config1 Register Fields
|
|
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9-1)
|
|
*/
|
|
#define MIPS_CONFIG1_M 0x80000000 /* Flag: Config2 is present. */
|
|
#define MIPS_CONFIG1_TLBSZ_MASK 0x7E000000 /* bits 30..25 # tlb entries minus one */
|
|
#define MIPS_CONFIG1_TLBSZ_SHIFT 25
|
|
|
|
#define MIPS_CONFIG1_IS_MASK 0x01C00000 /* bits 24..22 icache sets per way */
|
|
#define MIPS_CONFIG1_IS_SHIFT 22
|
|
#define MIPS_CONFIG1_IL_MASK 0x00380000 /* bits 21..19 icache line size */
|
|
#define MIPS_CONFIG1_IL_SHIFT 19
|
|
#define MIPS_CONFIG1_IA_MASK 0x00070000 /* bits 18..16 icache associativity */
|
|
#define MIPS_CONFIG1_IA_SHIFT 16
|
|
#define MIPS_CONFIG1_DS_MASK 0x0000E000 /* bits 15..13 dcache sets per way */
|
|
#define MIPS_CONFIG1_DS_SHIFT 13
|
|
#define MIPS_CONFIG1_DL_MASK 0x00001C00 /* bits 12..10 dcache line size */
|
|
#define MIPS_CONFIG1_DL_SHIFT 10
|
|
#define MIPS_CONFIG1_DA_MASK 0x00000380 /* bits 9.. 7 dcache associativity */
|
|
#define MIPS_CONFIG1_DA_SHIFT 7
|
|
#define MIPS_CONFIG1_LOWBITS 0x0000007F
|
|
#define MIPS_CONFIG1_C2 0x00000040 /* Coprocessor 2 implemented */
|
|
#define MIPS_CONFIG1_MD 0x00000020 /* MDMX ASE implemented (MIPS64) */
|
|
#define MIPS_CONFIG1_PC 0x00000010 /* Performance counters implemented */
|
|
#define MIPS_CONFIG1_WR 0x00000008 /* Watch registers implemented */
|
|
#define MIPS_CONFIG1_CA 0x00000004 /* MIPS16e ISA implemented */
|
|
#define MIPS_CONFIG1_EP 0x00000002 /* EJTAG implemented */
|
|
#define MIPS_CONFIG1_FP 0x00000001 /* FPU implemented */
|
|
|
|
#define MIPS_CONFIG2_SA_SHIFT 0 /* Secondary cache associativity */
|
|
#define MIPS_CONFIG2_SA_MASK 0xf
|
|
#define MIPS_CONFIG2_SL_SHIFT 4 /* Secondary cache line size */
|
|
#define MIPS_CONFIG2_SL_MASK 0xf
|
|
#define MIPS_CONFIG2_SS_SHIFT 8 /* Secondary cache sets per way */
|
|
#define MIPS_CONFIG2_SS_MASK 0xf
|
|
|
|
#define MIPS_CONFIG3_CMGCR_MASK (1 << 29) /* Coherence manager present */
|
|
|
|
/*
|
|
* Config2 Register Fields
|
|
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.40)
|
|
*/
|
|
#define MIPS_CONFIG2_M 0x80000000 /* Flag: Config3 is present. */
|
|
|
|
/*
|
|
* Config3 Register Fields
|
|
* (See "MIPS Architecture for Programmers Volume III", MD00091, Table 9.41)
|
|
*/
|
|
#define MIPS_CONFIG3_M 0x80000000 /* Flag: Config4 is present */
|
|
#define MIPS_CONFIG3_ULR 0x00002000 /* UserLocal reg implemented */
|
|
|
|
#define MIPS_CONFIG4_MMUSIZEEXT 0x000000FF /* bits 7.. 0 MMU Size Extension */
|
|
#define MIPS_CONFIG4_MMUEXTDEF 0x0000C000 /* bits 15.14 MMU Extension Definition */
|
|
#define MIPS_CONFIG4_MMUEXTDEF_MMUSIZEEXT 0x00004000 /* This values denotes CONFIG4 bits */
|
|
|
|
/*
|
|
* Values for the code field in a break instruction.
|
|
*/
|
|
#define MIPS_BREAK_INSTR 0x0000000d
|
|
#define MIPS_BREAK_VAL_MASK 0x03ff0000
|
|
#define MIPS_BREAK_VAL_SHIFT 16
|
|
#define MIPS_BREAK_KDB_VAL 512
|
|
#define MIPS_BREAK_SSTEP_VAL 513
|
|
#define MIPS_BREAK_BRKPT_VAL 514
|
|
#define MIPS_BREAK_SOVER_VAL 515
|
|
#define MIPS_BREAK_DDB_VAL 516
|
|
#define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
#define MIPS_BREAK_DDB (MIPS_BREAK_INSTR | \
|
|
(MIPS_BREAK_DDB_VAL << MIPS_BREAK_VAL_SHIFT))
|
|
|
|
/*
|
|
* Mininum and maximum cache sizes.
|
|
*/
|
|
#define MIPS_MIN_CACHE_SIZE (16 * 1024)
|
|
#define MIPS_MAX_CACHE_SIZE (256 * 1024)
|
|
#define MIPS_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */
|
|
|
|
/*
|
|
* The floating point version and status registers.
|
|
*/
|
|
#define MIPS_FPU_ID $0
|
|
#define MIPS_FPU_CSR $31
|
|
|
|
/*
|
|
* The floating point coprocessor status register bits.
|
|
*/
|
|
#define MIPS_FPU_ROUNDING_BITS 0x00000003
|
|
#define MIPS_FPU_ROUND_RN 0x00000000
|
|
#define MIPS_FPU_ROUND_RZ 0x00000001
|
|
#define MIPS_FPU_ROUND_RP 0x00000002
|
|
#define MIPS_FPU_ROUND_RM 0x00000003
|
|
#define MIPS_FPU_STICKY_BITS 0x0000007c
|
|
#define MIPS_FPU_STICKY_INEXACT 0x00000004
|
|
#define MIPS_FPU_STICKY_UNDERFLOW 0x00000008
|
|
#define MIPS_FPU_STICKY_OVERFLOW 0x00000010
|
|
#define MIPS_FPU_STICKY_DIV0 0x00000020
|
|
#define MIPS_FPU_STICKY_INVALID 0x00000040
|
|
#define MIPS_FPU_ENABLE_BITS 0x00000f80
|
|
#define MIPS_FPU_ENABLE_INEXACT 0x00000080
|
|
#define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100
|
|
#define MIPS_FPU_ENABLE_OVERFLOW 0x00000200
|
|
#define MIPS_FPU_ENABLE_DIV0 0x00000400
|
|
#define MIPS_FPU_ENABLE_INVALID 0x00000800
|
|
#define MIPS_FPU_EXCEPTION_BITS 0x0003f000
|
|
#define MIPS_FPU_EXCEPTION_INEXACT 0x00001000
|
|
#define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000
|
|
#define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000
|
|
#define MIPS_FPU_EXCEPTION_DIV0 0x00008000
|
|
#define MIPS_FPU_EXCEPTION_INVALID 0x00010000
|
|
#define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000
|
|
#define MIPS_FPU_COND_BIT 0x00800000
|
|
#define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */
|
|
#define MIPS_FPC_MBZ_BITS 0xfe7c0000
|
|
|
|
|
|
/*
|
|
* Constants to determine if have a floating point instruction.
|
|
*/
|
|
#define MIPS_OPCODE_SHIFT 26
|
|
#define MIPS_OPCODE_C1 0x11
|
|
|
|
/* Coherence manager constants */
|
|
#define MIPS_CMGCRB_BASE 11
|
|
#define MIPS_CMGCRF_BASE (~((1 << MIPS_CMGCRB_BASE) - 1))
|
|
|
|
/*
|
|
* Bits defined for for the HWREna (CP0 register 7, select 0).
|
|
*/
|
|
#define MIPS_HWRENA_CPUNUM (1<<0) /* CPU number program is running on */
|
|
#define MIPS_HWRENA_SYNCI_STEP (1<<1) /* Address step sized used with SYNCI */
|
|
#define MIPS_HWRENA_CC (1<<2) /* Hi Res cycle counter */
|
|
#define MIPS_HWRENA_CCRES (1<<3) /* Cycle counter resolution */
|
|
#define MIPS_HWRENA_UL (1<<29) /* UserLocal Register */
|
|
#define MIPS_HWRENA_IMPL30 (1<<30) /* Implementation-dependent 30 */
|
|
#define MIPS_HWRENA_IMPL31 (1<<31) /* Implementation-dependent 31 */
|
|
|
|
#endif /* _MIPS_CPUREGS_H_ */
|