8563f77dc9
IBM's DPTA and DTLA series of drives (no other disk vendors are known to support this) on non-Promise controllers (promise controllers lockup when given the tagged queuing specific commands). It gives especially master/slave comboes about 5% better performance. Add support for the Promise ATA100 OEM chip (pdc20265) Add support for the Cyrix 5530 Change the way status is read from the drives, use the alternate status reg when possible. Better support for DEVFS, the acdXtY devices are now created when needed. Lots of little cleanups.
701 lines
20 KiB
C
701 lines
20 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "atapicd.h"
|
|
#include "atapist.h"
|
|
#include "atapifd.h"
|
|
#include "opt_global.h"
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/malloc.h>
|
|
#include <machine/clock.h>
|
|
#include <machine/bus.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/atapi-all.h>
|
|
|
|
/* prototypes */
|
|
static void atapi_read(struct atapi_request *, int);
|
|
static void atapi_write(struct atapi_request *, int);
|
|
static void atapi_timeout(struct atapi_request *request);
|
|
static char *atapi_type(int);
|
|
static char *atapi_cmd2str(u_int8_t);
|
|
static char *atapi_skey2str(u_int8_t);
|
|
|
|
/* internal vars */
|
|
MALLOC_DEFINE(M_ATAPI, "ATAPI generic", "ATAPI driver generic layer");
|
|
|
|
/* defines */
|
|
#define ATAPI_MAX_RETRIES 3
|
|
#define ATP_PARAM ATA_PARAM(atp->controller, atp->unit)
|
|
|
|
void
|
|
atapi_attach(struct ata_softc *scp, int device)
|
|
{
|
|
struct atapi_softc *atp;
|
|
|
|
if (!(atp = malloc(sizeof(struct atapi_softc), M_ATAPI, M_NOWAIT))) {
|
|
ata_printf(scp, device, "failed to allocate driver storage\n");
|
|
return;
|
|
}
|
|
bzero(atp, sizeof(struct atapi_softc));
|
|
atp->controller = scp;
|
|
atp->unit = device;
|
|
if (bootverbose)
|
|
ata_printf(scp, device,
|
|
"piomode=%d dmamode=%d udmamode=%d dmaflag=%d\n",
|
|
ata_pmode(ATP_PARAM), ata_wmode(ATP_PARAM),
|
|
ata_umode(ATP_PARAM), ATP_PARAM->dmaflag);
|
|
|
|
#ifdef ATA_ENABLE_ATAPI_DMA
|
|
if (!(ATP_PARAM->drqtype == ATAPI_DRQT_INTR)) {
|
|
ata_dmainit(atp->controller, atp->unit,
|
|
(ata_pmode(ATP_PARAM) < 0) ?
|
|
(ATP_PARAM->dmaflag ? 4 : 0) : ata_pmode(ATP_PARAM),
|
|
(ata_wmode(ATP_PARAM) < 0) ?
|
|
(ATP_PARAM->dmaflag ? 2 : 0) : ata_wmode(ATP_PARAM),
|
|
ata_umode(ATP_PARAM));
|
|
}
|
|
else
|
|
#endif
|
|
/* set PIO mode */
|
|
ata_dmainit(atp->controller, atp->unit,
|
|
ata_pmode(ATP_PARAM)<0 ? 0 : ata_pmode(ATP_PARAM), -1, -1);
|
|
|
|
switch (ATP_PARAM->device_type) {
|
|
#if NATAPICD > 0
|
|
case ATAPI_TYPE_CDROM:
|
|
if (acdattach(atp))
|
|
goto notfound;
|
|
break;
|
|
#endif
|
|
#if NATAPIFD > 0
|
|
case ATAPI_TYPE_DIRECT:
|
|
if (afdattach(atp))
|
|
goto notfound;
|
|
break;
|
|
#endif
|
|
#if NATAPIST > 0
|
|
case ATAPI_TYPE_TAPE:
|
|
if (astattach(atp))
|
|
goto notfound;
|
|
break;
|
|
#endif
|
|
notfound:
|
|
default:
|
|
ata_printf(scp, device, "<%.40s/%.8s> %s device - NO DRIVER!\n",
|
|
ATP_PARAM->model, ATP_PARAM->revision,
|
|
atapi_type(ATP_PARAM->device_type));
|
|
free(atp, M_ATAPI);
|
|
atp = NULL;
|
|
}
|
|
/* store our softc */
|
|
scp->dev_softc[ATA_DEV(device)] = atp;
|
|
}
|
|
|
|
void
|
|
atapi_detach(struct atapi_softc *atp)
|
|
{
|
|
switch (ATP_PARAM->device_type) {
|
|
#if NATAPICD > 0
|
|
case ATAPI_TYPE_CDROM:
|
|
acddetach(atp);
|
|
break;
|
|
#endif
|
|
#if NATAPIFD > 0
|
|
case ATAPI_TYPE_DIRECT:
|
|
afddetach(atp);
|
|
break;
|
|
#endif
|
|
#if NATAPIST > 0
|
|
case ATAPI_TYPE_TAPE:
|
|
astdetach(atp);
|
|
break;
|
|
#endif
|
|
default:
|
|
return;
|
|
}
|
|
free(atp, M_ATAPI);
|
|
}
|
|
|
|
int
|
|
atapi_queue_cmd(struct atapi_softc *atp, int8_t *ccb, caddr_t data,
|
|
int count, int flags, int timeout,
|
|
atapi_callback_t callback, void *driver)
|
|
{
|
|
struct atapi_request *request;
|
|
int error, s;
|
|
|
|
if (!(request = malloc(sizeof(struct atapi_request), M_ATAPI, M_NOWAIT)))
|
|
return ENOMEM;
|
|
|
|
bzero(request, sizeof(struct atapi_request));
|
|
request->device = atp;
|
|
request->data = data;
|
|
request->bytecount = count;
|
|
request->flags = flags;
|
|
request->timeout = timeout * hz;
|
|
request->ccbsize = (ATP_PARAM->cmdsize) ? 16 : 12;
|
|
bcopy(ccb, request->ccb, request->ccbsize);
|
|
if (callback) {
|
|
request->callback = callback;
|
|
request->driver = driver;
|
|
}
|
|
if (atp->controller->mode[ATA_DEV(atp->unit)] >= ATA_DMA) {
|
|
if (!(request->dmatab = ata_dmaalloc(atp->controller, atp->unit)))
|
|
atp->controller->mode[ATA_DEV(atp->unit)] = ATA_PIO;
|
|
}
|
|
|
|
s = splbio();
|
|
|
|
/* if not using callbacks, prepare to sleep for this request */
|
|
if (!callback)
|
|
asleep((caddr_t)request, PRIBIO, "atprq", 0);
|
|
|
|
/* append onto controller queue and try to start controller */
|
|
#ifdef ATAPI_DEBUG
|
|
printf("%s: queueing %s ",
|
|
request->device->devname, atapi_cmd2str(request->ccb[0]));
|
|
atapi_dump("ccb = ", &request->ccb[0], sizeof(request->ccb));
|
|
#endif
|
|
if (flags & ATPR_F_AT_HEAD)
|
|
TAILQ_INSERT_HEAD(&atp->controller->atapi_queue, request, chain);
|
|
else
|
|
TAILQ_INSERT_TAIL(&atp->controller->atapi_queue, request, chain);
|
|
ata_start(atp->controller);
|
|
|
|
/* if callback used, then just return, gets called from interrupt context */
|
|
if (callback) {
|
|
splx(s);
|
|
return 0;
|
|
}
|
|
|
|
/* wait for request to complete */
|
|
await(PRIBIO, 0);
|
|
splx(s);
|
|
error = request->error;
|
|
#ifdef ATAPI_DEBUG
|
|
printf("%s: finished %s\n",
|
|
request->device->devname, atapi_cmd2str(request->ccb[0]));
|
|
#endif
|
|
if (request->dmatab)
|
|
free(request->dmatab, M_DEVBUF);
|
|
free(request, M_ATAPI);
|
|
return error;
|
|
}
|
|
|
|
void
|
|
atapi_start(struct atapi_softc *atp)
|
|
{
|
|
switch (ATP_PARAM->device_type) {
|
|
#if NATAPICD > 0
|
|
case ATAPI_TYPE_CDROM:
|
|
acd_start(atp);
|
|
break;
|
|
#endif
|
|
#if NATAPIFD > 0
|
|
case ATAPI_TYPE_DIRECT:
|
|
afd_start(atp);
|
|
break;
|
|
#endif
|
|
#if NATAPIST > 0
|
|
case ATAPI_TYPE_TAPE:
|
|
ast_start(atp);
|
|
break;
|
|
#endif
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
void
|
|
atapi_transfer(struct atapi_request *request)
|
|
{
|
|
struct atapi_softc *atp = request->device;
|
|
int timout;
|
|
u_int8_t reason;
|
|
|
|
#ifdef ATAPI_DEBUG
|
|
printf("%s: starting %s ",
|
|
request->device->devname, atapi_cmd2str(request->ccb[0]));
|
|
atapi_dump("ccb = ", &request->ccb[0], sizeof(request->ccb));
|
|
#endif
|
|
/* start timeout for this command */
|
|
request->timeout_handle = timeout((timeout_t *)atapi_timeout,
|
|
request, request->timeout);
|
|
if (request->ccb[0] != ATAPI_REQUEST_SENSE)
|
|
atp->cmd = request->ccb[0];
|
|
|
|
/* if DMA enabled setup DMA hardware */
|
|
request->flags &= ~ATPR_F_DMA_USED;
|
|
if ((atp->controller->mode[ATA_DEV(atp->unit)] >= ATA_DMA) &&
|
|
(request->ccb[0] == ATAPI_READ ||
|
|
request->ccb[0] == ATAPI_READ_BIG ||
|
|
((request->ccb[0] == ATAPI_WRITE ||
|
|
request->ccb[0] == ATAPI_WRITE_BIG) &&
|
|
!(atp->controller->flags & ATA_ATAPI_DMA_RO))) &&
|
|
!ata_dmasetup(atp->controller, atp->unit, request->dmatab,
|
|
(void *)request->data, request->bytecount)) {
|
|
request->flags |= ATPR_F_DMA_USED;
|
|
}
|
|
|
|
/* start ATAPI operation */
|
|
if (ata_command(atp->controller, atp->unit, ATA_C_PACKET_CMD,
|
|
request->bytecount, 0, 0, 0,
|
|
(request->flags & ATPR_F_DMA_USED) ? ATA_F_DMA : 0,
|
|
ATA_IMMEDIATE))
|
|
printf("%s: failure to send ATAPI packet command\n", atp->devname);
|
|
|
|
if (request->flags & ATPR_F_DMA_USED)
|
|
ata_dmastart(atp->controller, atp->unit,
|
|
request->dmatab, request->flags & ATPR_F_READ);
|
|
|
|
/* command interrupt device ? just return */
|
|
if (ATP_PARAM->drqtype == ATAPI_DRQT_INTR)
|
|
return;
|
|
|
|
/* ready to write ATAPI command */
|
|
timout = 5000; /* might be less for fast devices */
|
|
while (timout--) {
|
|
reason = inb(atp->controller->ioaddr + ATA_IREASON);
|
|
atp->controller->status = inb(atp->controller->ioaddr + ATA_STATUS);
|
|
if (((reason & (ATA_I_CMD | ATA_I_IN)) |
|
|
(atp->controller->status&(ATA_S_DRQ|ATA_S_BUSY)))==ATAPI_P_CMDOUT)
|
|
break;
|
|
DELAY(20);
|
|
}
|
|
if (timout <= 0) {
|
|
request->result = inb(atp->controller->ioaddr + ATA_ERROR);
|
|
printf("%s: failure to execute ATAPI packet command\n", atp->devname);
|
|
return;
|
|
}
|
|
|
|
/* this seems to be needed for some (slow) devices */
|
|
DELAY(10);
|
|
|
|
/* send actual command */
|
|
outsw(atp->controller->ioaddr + ATA_DATA, request->ccb,
|
|
request->ccbsize / sizeof(int16_t));
|
|
}
|
|
|
|
int
|
|
atapi_interrupt(struct atapi_request *request)
|
|
{
|
|
struct atapi_softc *atp = request->device;
|
|
int8_t **buffer = (int8_t **)&request->data;
|
|
int reason, dma_stat = 0;
|
|
|
|
if (request->ccb[0] == ATAPI_REQUEST_SENSE)
|
|
*buffer = (int8_t *)&request->sense;
|
|
|
|
reason = (inb(atp->controller->ioaddr+ATA_IREASON) & (ATA_I_CMD|ATA_I_IN)) |
|
|
(atp->controller->status & ATA_S_DRQ);
|
|
|
|
if (reason == ATAPI_P_CMDOUT) {
|
|
if (!(atp->controller->status & ATA_S_DRQ)) {
|
|
request->result = inb(atp->controller->ioaddr + ATA_ERROR);
|
|
printf("%s: command interrupt without DRQ\n", atp->devname);
|
|
goto op_finished;
|
|
}
|
|
outsw(atp->controller->ioaddr + ATA_DATA, request->ccb,
|
|
request->ccbsize / sizeof(int16_t));
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
if (request->flags & ATPR_F_DMA_USED) {
|
|
dma_stat = ata_dmadone(atp->controller);
|
|
if ((atp->controller->status & (ATA_S_ERROR | ATA_S_DWF)) ||
|
|
dma_stat & ATA_BMSTAT_ERROR) {
|
|
request->result = inb(atp->controller->ioaddr + ATA_ERROR);
|
|
}
|
|
else {
|
|
request->result = 0;
|
|
request->donecount = request->bytecount;
|
|
request->bytecount = 0;
|
|
}
|
|
}
|
|
else {
|
|
int length = inb(atp->controller->ioaddr + ATA_CYL_LSB) |
|
|
inb(atp->controller->ioaddr + ATA_CYL_MSB) << 8;
|
|
|
|
switch (reason) {
|
|
case ATAPI_P_WRITE:
|
|
if (request->flags & ATPR_F_READ) {
|
|
request->result = inb(atp->controller->ioaddr + ATA_ERROR);
|
|
printf("%s: %s trying to write on read buffer\n",
|
|
atp->devname, atapi_cmd2str(atp->cmd));
|
|
break;
|
|
}
|
|
atapi_write(request, length);
|
|
return ATA_OP_CONTINUES;
|
|
|
|
case ATAPI_P_READ:
|
|
if (!(request->flags & ATPR_F_READ)) {
|
|
request->result = inb(atp->controller->ioaddr + ATA_ERROR);
|
|
printf("%s: %s trying to read on write buffer\n",
|
|
atp->devname, atapi_cmd2str(atp->cmd));
|
|
break;
|
|
}
|
|
atapi_read(request, length);
|
|
return ATA_OP_CONTINUES;
|
|
|
|
case ATAPI_P_DONEDRQ:
|
|
printf("%s: %s DONEDRQ\n", atp->devname, atapi_cmd2str(atp->cmd));
|
|
if (request->flags & ATPR_F_READ)
|
|
atapi_read(request, length);
|
|
else
|
|
atapi_write(request, length);
|
|
/* FALLTHROUGH */
|
|
|
|
case ATAPI_P_ABORT:
|
|
case ATAPI_P_DONE:
|
|
if (atp->controller->status & (ATA_S_ERROR | ATA_S_DWF))
|
|
request->result = inb(atp->controller->ioaddr + ATA_ERROR);
|
|
else
|
|
if (request->ccb[0] != ATAPI_REQUEST_SENSE)
|
|
request->result = 0;
|
|
break;
|
|
|
|
default:
|
|
printf("%s: unknown transfer phase %d\n", atp->devname, reason);
|
|
}
|
|
}
|
|
|
|
op_finished:
|
|
untimeout((timeout_t *)atapi_timeout, request, request->timeout_handle);
|
|
|
|
/* check for error, if valid sense key, queue a request sense cmd */
|
|
if ((request->result & ATAPI_SK_MASK) &&
|
|
request->ccb[0] != ATAPI_REQUEST_SENSE) {
|
|
bzero(request->ccb, request->ccbsize);
|
|
request->ccb[0] = ATAPI_REQUEST_SENSE;
|
|
request->ccb[4] = sizeof(struct atapi_reqsense);
|
|
request->bytecount = sizeof(struct atapi_reqsense);
|
|
request->flags = ATPR_F_READ;
|
|
TAILQ_INSERT_HEAD(&atp->controller->atapi_queue, request, chain);
|
|
}
|
|
else {
|
|
request->error = 0;
|
|
if (request->result) {
|
|
switch ((request->result & ATAPI_SK_MASK)) {
|
|
case ATAPI_SK_RESERVED:
|
|
printf("%s: %s - timeout error = %02x\n",
|
|
atp->devname,
|
|
atapi_cmd2str(atp->cmd), request->result & ATAPI_E_MASK);
|
|
request->error = EIO;
|
|
break;
|
|
|
|
case ATAPI_SK_NO_SENSE:
|
|
request->error = 0;
|
|
break;
|
|
|
|
case ATAPI_SK_RECOVERED_ERROR:
|
|
printf("%s: %s - recovered error\n",
|
|
atp->devname, atapi_cmd2str(atp->cmd));
|
|
request->error = 0;
|
|
break;
|
|
|
|
case ATAPI_SK_NOT_READY:
|
|
request->error = EBUSY;
|
|
break;
|
|
|
|
case ATAPI_SK_UNIT_ATTENTION:
|
|
atp->flags |= ATAPI_F_MEDIA_CHANGED;
|
|
request->error = EIO;
|
|
break;
|
|
|
|
default:
|
|
printf("%s: %s - %s asc=%02x ascq=%02x error=%02x\n",
|
|
atp->devname, atapi_cmd2str(atp->cmd),
|
|
atapi_skey2str(request->sense.sense_key),
|
|
request->sense.asc, request->sense.ascq,
|
|
request->result & ATAPI_E_MASK);
|
|
request->error = EIO;
|
|
}
|
|
}
|
|
if (request->callback) {
|
|
#ifdef ATAPI_DEBUG
|
|
printf("%s: finished %s (callback)\n",
|
|
request->device->devname, atapi_cmd2str(request->ccb[0]));
|
|
#endif
|
|
if (!((request->callback)(request))) {
|
|
if (request->dmatab)
|
|
free(request->dmatab, M_DEVBUF);
|
|
free(request, M_ATAPI);
|
|
}
|
|
}
|
|
else
|
|
wakeup((caddr_t)request);
|
|
}
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
void
|
|
atapi_reinit(struct atapi_softc *atp)
|
|
{
|
|
/* reinit device parameters */
|
|
if (atp->controller->mode[ATA_DEV(atp->unit)] >= ATA_DMA)
|
|
ata_dmainit(atp->controller, atp->unit,
|
|
(ata_pmode(ATP_PARAM) < 0) ?
|
|
(ATP_PARAM->dmaflag ? 4 : 0) : ata_pmode(ATP_PARAM),
|
|
(ata_wmode(ATP_PARAM) < 0) ?
|
|
(ATP_PARAM->dmaflag ? 2 : 0) : ata_wmode(ATP_PARAM),
|
|
ata_umode(ATP_PARAM));
|
|
else
|
|
ata_dmainit(atp->controller, atp->unit,
|
|
ata_pmode(ATP_PARAM)<0 ? 0 : ata_pmode(ATP_PARAM), -1, -1);
|
|
}
|
|
|
|
int
|
|
atapi_test_ready(struct atapi_softc *atp)
|
|
{
|
|
int8_t ccb[16] = { ATAPI_TEST_UNIT_READY, 0, 0, 0, 0,
|
|
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
|
|
|
|
return atapi_queue_cmd(atp, ccb, NULL, 0, 0, 30, NULL, NULL);
|
|
}
|
|
|
|
int
|
|
atapi_wait_ready(struct atapi_softc *atp, int timeout)
|
|
{
|
|
int error = 0, timout = timeout * hz;
|
|
|
|
while (timout > 0) {
|
|
if ((error = atapi_test_ready(atp)) != EBUSY)
|
|
break;
|
|
tsleep((caddr_t)&error, PRIBIO, "atpwt", 50);
|
|
timout -= 50;
|
|
}
|
|
return error;
|
|
}
|
|
|
|
void
|
|
atapi_dump(char *label, void *data, int len)
|
|
{
|
|
u_int8_t *p = data;
|
|
|
|
printf ("%s %02x", label, *p++);
|
|
while (--len > 0)
|
|
printf ("-%02x", *p++);
|
|
printf ("\n");
|
|
}
|
|
|
|
static void
|
|
atapi_read(struct atapi_request *request, int length)
|
|
{
|
|
int8_t **buffer = (int8_t **)&request->data;
|
|
int size = min(request->bytecount, length);
|
|
int resid;
|
|
|
|
if (request->ccb[0] == ATAPI_REQUEST_SENSE)
|
|
*buffer = (int8_t *)&request->sense;
|
|
|
|
if (request->device->controller->flags & ATA_USE_16BIT ||
|
|
(size % sizeof(int32_t)))
|
|
insw(request->device->controller->ioaddr + ATA_DATA,
|
|
(void *)((uintptr_t)*buffer), size / sizeof(int16_t));
|
|
else
|
|
insl(request->device->controller->ioaddr + ATA_DATA,
|
|
(void *)((uintptr_t)*buffer), size / sizeof(int32_t));
|
|
|
|
if (request->bytecount < length) {
|
|
printf("%s: read data overrun %d/%d\n",
|
|
request->device->devname, length, request->bytecount);
|
|
for (resid=request->bytecount; resid<length; resid+=sizeof(int16_t))
|
|
inw(request->device->controller->ioaddr + ATA_DATA);
|
|
}
|
|
*buffer += size;
|
|
request->bytecount -= size;
|
|
request->donecount += size;
|
|
}
|
|
|
|
static void
|
|
atapi_write(struct atapi_request *request, int length)
|
|
{
|
|
int8_t **buffer = (int8_t **)&request->data;
|
|
int size = min(request->bytecount, length);
|
|
int resid;
|
|
|
|
if (request->ccb[0] == ATAPI_REQUEST_SENSE)
|
|
*buffer = (int8_t *)&request->sense;
|
|
|
|
if (request->device->controller->flags & ATA_USE_16BIT ||
|
|
(size % sizeof(int32_t)))
|
|
outsw(request->device->controller->ioaddr + ATA_DATA,
|
|
(void *)((uintptr_t)*buffer), size / sizeof(int16_t));
|
|
else
|
|
outsl(request->device->controller->ioaddr + ATA_DATA,
|
|
(void *)((uintptr_t)*buffer), size / sizeof(int32_t));
|
|
|
|
if (request->bytecount < length) {
|
|
printf("%s: write data underrun %d/%d\n",
|
|
request->device->devname, length, request->bytecount);
|
|
for (resid=request->bytecount; resid<length; resid+=sizeof(int16_t))
|
|
outw(request->device->controller->ioaddr + ATA_DATA, 0);
|
|
}
|
|
*buffer += size;
|
|
request->bytecount -= size;
|
|
request->donecount += size;
|
|
}
|
|
|
|
static void
|
|
atapi_timeout(struct atapi_request *request)
|
|
{
|
|
struct atapi_softc *atp = request->device;
|
|
int s = splbio();
|
|
|
|
atp->controller->running = NULL;
|
|
printf("%s: %s command timeout - resetting\n",
|
|
atp->devname, atapi_cmd2str(request->ccb[0]));
|
|
|
|
if (request->flags & ATPR_F_DMA_USED) {
|
|
ata_dmadone(atp->controller);
|
|
if (request->retries == ATAPI_MAX_RETRIES) {
|
|
ata_dmainit(atp->controller, atp->unit,
|
|
(ata_pmode(ATP_PARAM)<0)?0:ata_pmode(ATP_PARAM),-1,-1);
|
|
printf("%s: trying fallback to PIO mode\n", atp->devname);
|
|
request->retries = 0;
|
|
}
|
|
}
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < ATAPI_MAX_RETRIES)
|
|
TAILQ_INSERT_HEAD(&atp->controller->atapi_queue, request, chain);
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->result = ATAPI_SK_RESERVED | ATAPI_E_ABRT;
|
|
wakeup((caddr_t)request);
|
|
}
|
|
ata_reinit(atp->controller);
|
|
splx(s);
|
|
}
|
|
|
|
static char *
|
|
atapi_type(int type)
|
|
{
|
|
switch (type) {
|
|
case ATAPI_TYPE_CDROM:
|
|
return "CDROM";
|
|
case ATAPI_TYPE_DIRECT:
|
|
return "floppy";
|
|
case ATAPI_TYPE_TAPE:
|
|
return "tape";
|
|
case ATAPI_TYPE_OPTICAL:
|
|
return "optical";
|
|
default:
|
|
return "Unknown";
|
|
}
|
|
}
|
|
|
|
static char *
|
|
atapi_cmd2str(u_int8_t cmd)
|
|
{
|
|
switch (cmd) {
|
|
case 0x00: return ("TEST_UNIT_READY");
|
|
case 0x01: return ("REWIND");
|
|
case 0x03: return ("REQUEST_SENSE");
|
|
case 0x04: return ("FORMAT_UNIT");
|
|
case 0x08: return ("READ");
|
|
case 0x0a: return ("WRITE");
|
|
case 0x10: return ("WEOF");
|
|
case 0x11: return ("SPACE");
|
|
case 0x15: return ("MODE_SELECT");
|
|
case 0x19: return ("ERASE");
|
|
case 0x1a: return ("MODE_SENSE");
|
|
case 0x1b: return ("START_STOP");
|
|
case 0x1e: return ("PREVENT_ALLOW");
|
|
case 0x25: return ("READ_CAPACITY");
|
|
case 0x28: return ("READ_BIG");
|
|
case 0x2a: return ("WRITE_BIG");
|
|
case 0x2b: return ("LOCATE");
|
|
case 0x34: return ("READ_POSITION");
|
|
case 0x35: return ("SYNCHRONIZE_CACHE");
|
|
case 0x3b: return ("WRITE_BUFFER");
|
|
case 0x3c: return ("READ_BUFFER");
|
|
case 0x42: return ("READ_SUBCHANNEL");
|
|
case 0x43: return ("READ_TOC");
|
|
case 0x47: return ("PLAY_MSF");
|
|
case 0x48: return ("PLAY_TRACK");
|
|
case 0x4b: return ("PAUSE");
|
|
case 0x51: return ("READ_DISK_INFO");
|
|
case 0x52: return ("READ_TRACK_INFO");
|
|
case 0x53: return ("RESERVE_TRACK");
|
|
case 0x54: return ("SEND_OPC_INFO");
|
|
case 0x55: return ("MODE_SELECT_BIG");
|
|
case 0x58: return ("REPAIR_TRACK");
|
|
case 0x59: return ("READ_MASTER_CUE");
|
|
case 0x5a: return ("MODE_SENSE_BIG");
|
|
case 0x5b: return ("CLOSE_TRACK/SESSION");
|
|
case 0x5c: return ("READ_BUFFER_CAPACITY");
|
|
case 0x5d: return ("SEND_CUE_SHEET");
|
|
case 0xa1: return ("BLANK_CMD");
|
|
case 0xa3: return ("SEND_KEY");
|
|
case 0xa4: return ("REPORT_KEY");
|
|
case 0xa5: return ("PLAY_BIG");
|
|
case 0xa6: return ("LOAD_UNLOAD");
|
|
case 0xad: return ("READ_DVD_STRUCTURE");
|
|
case 0xb4: return ("PLAY_CD");
|
|
case 0xbb: return ("SET_SPEED");
|
|
case 0xbd: return ("MECH_STATUS");
|
|
case 0xbe: return ("READ_CD");
|
|
default: {
|
|
static char buffer[16];
|
|
sprintf(buffer, "unknown CMD (0x%02x)", cmd);
|
|
return buffer;
|
|
}
|
|
}
|
|
}
|
|
|
|
static char *
|
|
atapi_skey2str(u_int8_t skey)
|
|
{
|
|
switch (skey) {
|
|
case 0x00: return ("NO SENSE");
|
|
case 0x01: return ("RECOVERED ERROR");
|
|
case 0x02: return ("NOT READY");
|
|
case 0x03: return ("MEDIUM ERROR");
|
|
case 0x04: return ("HARDWARE ERROR");
|
|
case 0x05: return ("ILLEGAL REQUEST");
|
|
case 0x06: return ("UNIT ATTENTION");
|
|
case 0x07: return ("DATA PROTECT");
|
|
case 0x08: return ("BLANK CHECK");
|
|
case 0x09: return ("VENDOR SPECIFIC");
|
|
case 0x0a: return ("COPY ABORTED");
|
|
case 0x0b: return ("ABORTED COMMAND");
|
|
case 0x0c: return ("EQUAL");
|
|
case 0x0d: return ("VOLUME OVERFLOW");
|
|
case 0x0e: return ("MISCOMPARE");
|
|
case 0x0f: return ("RESERVED");
|
|
default: return("UNKNOWN");
|
|
}
|
|
}
|