freebsd-dev/sys/netinet6/udp6_output.c
Sam Leffler 5d84645305 Replace aux mbufs with packet tags:
o instead of a list of mbufs use a list of m_tag structures a la openbsd
o for netgraph et. al. extend the stock openbsd m_tag to include a 32-bit
  ABI/module number cookie
o for openbsd compatibility define a well-known cookie MTAG_ABI_COMPAT and
  use this in defining openbsd-compatible m_tag_find and m_tag_get routines
o rewrite KAME use of aux mbufs in terms of packet tags
o eliminate the most heavily used aux mbufs by adding an additional struct
  inpcb parameter to ip_output and ip6_output to allow the IPsec code to
  locate the security policy to apply to outbound packets
o bump __FreeBSD_version so code can be conditionalized
o fixup ipfilter's call to ip_output based on __FreeBSD_version

Reviewed by:	julian, luigi (silent), -arch, -net, darren
Approved by:	julian, silence from everyone else
Obtained from:	openbsd (mostly)
MFC after:	1 month
2002-10-16 01:54:46 +00:00

313 lines
9.2 KiB
C

/* $FreeBSD$ */
/* $KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $ */
/*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Copyright (c) 1982, 1986, 1989, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)udp_var.h 8.1 (Berkeley) 6/10/93
*/
#include "opt_ipsec.h"
#include "opt_inet.h"
#include "opt_inet6.h"
#include <sys/param.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/errno.h>
#include <sys/stat.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/route.h>
#include <net/if_types.h>
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/in_pcb.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/udp6_var.h>
#include <netinet/icmp6.h>
#include <netinet6/ip6protosw.h>
#ifdef IPSEC
#include <netinet6/ipsec.h>
#ifdef INET6
#include <netinet6/ipsec6.h>
#endif
#endif /* IPSEC */
#include <net/net_osdep.h>
/*
* UDP protocol inplementation.
* Per RFC 768, August, 1980.
*/
#define in6pcb inpcb
#define udp6stat udpstat
#define udp6s_opackets udps_opackets
int
udp6_output(in6p, m, addr6, control, td)
struct in6pcb *in6p;
struct mbuf *m;
struct mbuf *control;
struct sockaddr *addr6;
struct thread *td;
{
u_int32_t ulen = m->m_pkthdr.len;
u_int32_t plen = sizeof(struct udphdr) + ulen;
struct ip6_hdr *ip6;
struct udphdr *udp6;
struct in6_addr *laddr, *faddr;
u_short fport;
int error = 0;
struct ip6_pktopts opt, *stickyopt = in6p->in6p_outputopts;
int priv;
int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
int flags;
struct sockaddr_in6 tmp;
priv = 0;
if (td && !suser(td))
priv = 1;
if (control) {
if ((error = ip6_setpktoptions(control, &opt, priv, 0)) != 0)
goto release;
in6p->in6p_outputopts = &opt;
}
if (addr6) {
/*
* IPv4 version of udp_output calls in_pcbconnect in this case,
* which needs splnet and affects performance.
* Since we saw no essential reason for calling in_pcbconnect,
* we get rid of such kind of logic, and call in6_selectsrc
* and in6_pcbsetport in order to fill in the local address
* and the local port.
*/
struct sockaddr_in6 *sin6 = (struct sockaddr_in6 *)addr6;
if (sin6->sin6_port == 0) {
error = EADDRNOTAVAIL;
goto release;
}
if (!IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
/* how about ::ffff:0.0.0.0 case? */
error = EISCONN;
goto release;
}
/* protect *sin6 from overwrites */
tmp = *sin6;
sin6 = &tmp;
faddr = &sin6->sin6_addr;
fport = sin6->sin6_port; /* allow 0 port */
if (IN6_IS_ADDR_V4MAPPED(faddr)) {
if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
/*
* I believe we should explicitly discard the
* packet when mapped addresses are disabled,
* rather than send the packet as an IPv6 one.
* If we chose the latter approach, the packet
* might be sent out on the wire based on the
* default route, the situation which we'd
* probably want to avoid.
* (20010421 jinmei@kame.net)
*/
error = EINVAL;
goto release;
} else
af = AF_INET;
}
/* KAME hack: embed scopeid */
if (in6_embedscope(&sin6->sin6_addr, sin6, in6p, NULL) != 0) {
error = EINVAL;
goto release;
}
if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
laddr = in6_selectsrc(sin6, in6p->in6p_outputopts,
in6p->in6p_moptions,
&in6p->in6p_route,
&in6p->in6p_laddr, &error);
} else
laddr = &in6p->in6p_laddr; /* XXX */
if (laddr == NULL) {
if (error == 0)
error = EADDRNOTAVAIL;
goto release;
}
if (in6p->in6p_lport == 0 &&
(error = in6_pcbsetport(laddr, in6p, td)) != 0)
goto release;
} else {
if (IN6_IS_ADDR_UNSPECIFIED(&in6p->in6p_faddr)) {
error = ENOTCONN;
goto release;
}
if (IN6_IS_ADDR_V4MAPPED(&in6p->in6p_faddr)) {
if ((in6p->in6p_flags & IN6P_IPV6_V6ONLY)) {
/*
* XXX: this case would happen when the
* application sets the V6ONLY flag after
* connecting the foreign address.
* Such applications should be fixed,
* so we bark here.
*/
log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
"option was set for a connected socket\n");
error = EINVAL;
goto release;
} else
af = AF_INET;
}
laddr = &in6p->in6p_laddr;
faddr = &in6p->in6p_faddr;
fport = in6p->in6p_fport;
}
if (af == AF_INET)
hlen = sizeof(struct ip);
/*
* Calculate data length and get a mbuf
* for UDP and IP6 headers.
*/
M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT);
if (m == 0) {
error = ENOBUFS;
goto release;
}
/*
* Stuff checksum and output datagram.
*/
udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
udp6->uh_sport = in6p->in6p_lport; /* lport is always set in the PCB */
udp6->uh_dport = fport;
if (plen <= 0xffff)
udp6->uh_ulen = htons((u_short)plen);
else
udp6->uh_ulen = 0;
udp6->uh_sum = 0;
switch (af) {
case AF_INET6:
ip6 = mtod(m, struct ip6_hdr *);
ip6->ip6_flow = in6p->in6p_flowinfo & IPV6_FLOWINFO_MASK;
ip6->ip6_vfc &= ~IPV6_VERSION_MASK;
ip6->ip6_vfc |= IPV6_VERSION;
#if 0 /* ip6_plen will be filled in ip6_output. */
ip6->ip6_plen = htons((u_short)plen);
#endif
ip6->ip6_nxt = IPPROTO_UDP;
ip6->ip6_hlim = in6_selecthlim(in6p,
in6p->in6p_route.ro_rt ?
in6p->in6p_route.ro_rt->rt_ifp : NULL);
ip6->ip6_src = *laddr;
ip6->ip6_dst = *faddr;
if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
sizeof(struct ip6_hdr), plen)) == 0) {
udp6->uh_sum = 0xffff;
}
flags = 0;
udp6stat.udp6s_opackets++;
error = ip6_output(m, in6p->in6p_outputopts, &in6p->in6p_route,
flags, in6p->in6p_moptions, NULL, in6p);
break;
case AF_INET:
error = EAFNOSUPPORT;
goto release;
}
goto releaseopt;
release:
m_freem(m);
releaseopt:
if (control) {
ip6_clearpktopts(in6p->in6p_outputopts, 0, -1);
in6p->in6p_outputopts = stickyopt;
m_freem(control);
}
return(error);
}