freebsd-dev/sys/mips/atheros/ar933xreg.h
Adrian Chadd 34141ebcda Add register definitions for the AR933x SoC GMAC (ie, ethernet MAC)
control block.

The GMAC configuration block allows for some configuration of how
the GMAC0 (ie, arge0) port is connected to the on-board switch
(if indeed there is one.)  It both can be pushed into the on-board
switch; it could also be torn out and exposed via an external
MII (and that operational mode is also controllable.)

Obtained from:	Linux/OpenWRT
2013-10-14 23:57:12 +00:00

101 lines
3.8 KiB
C

/*-
* Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef __AR93XX_REG_H__
#define __AR93XX_REG_H__
#define REV_ID_MAJOR_AR9330 0x0110
#define REV_ID_MAJOR_AR9331 0x1110
#define AR933X_REV_ID_REVISION_MASK 0x3
#define AR933X_GPIO_COUNT 30
#define AR933X_UART_BASE (AR71XX_APB_BASE + 0x00020000)
#define AR933X_UART_SIZE 0x14
#define AR933X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
#define AR933X_GMAC_SIZE 0x04
#define AR933X_GMAC_REG_ETH_CFG (AR933X_GMAC_BASE + 0x00)
#define AR933X_ETH_CFG_RGMII_GE0 (1 << 0)
#define AR933X_ETH_CFG_MII_GE0 (1 << 1)
#define AR933X_ETH_CFG_GMII_GE0 (1 << 2)
#define AR933X_ETH_CFG_MII_GE0_MASTER (1 << 3)
#define AR933X_ETH_CFG_MII_GE0_SLAVE (1 << 4)
#define AR933X_ETH_CFG_MII_GE0_ERR_EN (1 << 5)
#define AR933X_ETH_CFG_SW_PHY_SWAP (1 << 7)
#define AR933X_ETH_CFG_SW_PHY_ADDR_SWAP (1 << 8)
#define AR933X_ETH_CFG_RMII_GE0 (1 << 9)
#define AR933X_ETH_CFG_RMII_GE0_SPD_10 0
#define AR933X_ETH_CFG_RMII_GE0_SPD_100 (1 << 10)
#define AR933X_WMAC_BASE (AR71XX_APB_BASE + 0x00100000)
#define AR933X_WMAC_SIZE 0x20000
#define AR933X_EHCI_BASE 0x1b000000
#define AR933X_EHCI_SIZE 0x1000
#define AR933X_DDR_REG_FLUSH_GE0 (AR71XX_APB_BASE + 0x7c)
#define AR933X_DDR_REG_FLUSH_GE1 (AR71XX_APB_BASE + 0x80)
#define AR933X_DDR_REG_FLUSH_USB (AR71XX_APB_BASE + 0x84)
#define AR933X_DDR_REG_FLUSH_WMAC (AR71XX_APB_BASE + 0x88)
#define AR933X_PLL_CPU_CONFIG_REG (AR71XX_PLL_CPU_BASE + 0x00)
#define AR933X_PLL_CLOCK_CTRL_REG (AR71XX_PLL_CPU_BASE + 0x08)
#define AR933X_PLL_CPU_CONFIG_NINT_SHIFT 10
#define AR933X_PLL_CPU_CONFIG_NINT_MASK 0x3f
#define AR933X_PLL_CPU_CONFIG_REFDIV_SHIFT 16
#define AR933X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
#define AR933X_PLL_CPU_CONFIG_OUTDIV_SHIFT 23
#define AR933X_PLL_CPU_CONFIG_OUTDIV_MASK 0x7
#define AR933X_PLL_CLOCK_CTRL_BYPASS (1 << 2)
#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_SHIFT 5
#define AR933X_PLL_CLOCK_CTRL_CPU_DIV_MASK 0x3
#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_SHIFT 10
#define AR933X_PLL_CLOCK_CTRL_DDR_DIV_MASK 0x3
#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_SHIFT 15
#define AR933X_PLL_CLOCK_CTRL_AHB_DIV_MASK 0x7
#define AR933X_RESET_REG_RESET_MODULE (AR71XX_RST_BLOCK_BASE + 0x1c)
#define AR933X_RESET_REG_BOOTSTRAP (AR71XX_RST_BLOCK_BASE + 0xac)
#define AR933X_RESET_WMAC (1 << 11)
#define AR933X_RESET_USB_HOST (1 << 5)
#define AR933X_RESET_USB_PHY (1 << 4)
#define AR933X_RESET_USBSUS_OVERRIDE (1 << 3)
#define AR933X_BOOTSTRAP_REF_CLK_40 (1 << 0)
#define AR933X_PLL_VAL_1000 0x00110000
#define AR933X_PLL_VAL_100 0x00001099
#define AR933X_PLL_VAL_10 0x00991099
#endif /* __AR93XX_REG_H__ */