freebsd-dev/share/man/man4/snd_hda.4
2007-07-14 12:35:29 +00:00

258 lines
6.0 KiB
Groff

.\" Copyright (c) 2006 Joel Dahl <joel@FreeBSD.org>
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd July 14, 2007
.Dt SND_HDA 4
.Os
.Sh NAME
.Nm snd_hda
.Nd "Intel High Definition Audio bridge device driver"
.Sh SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
.Bd -ragged -offset indent
.Cd "device sound"
.Cd "device snd_hda"
.Ed
.Pp
Alternatively, to load the driver as a module at boot time, place the
following line in
.Xr loader.conf 5 :
.Bd -literal -offset indent
snd_hda_load="YES"
.Ed
.Sh DESCRIPTION
The
.Nm
bridge device driver allows the generic audio driver,
.Xr sound 4 ,
to attach to Intel High Definition Audio devices.
The
.Nm
driver supports hardware that conforms with revision 1.0 of the Intel High
Definition Audio specification and tries to behave much like the Microsoft
Universal Audio Architecture (UAA) draft (revision 0.7b) for handling audio
devices.
HDA acts like a primary bus, similar to
.Xr miibus 4 ,
for handling various child buses such as audio, modem and HDMI (High Definition
Multimedia Interface).
Only audio is implemented in the
.Nm
driver.
.Pp
The High Definition (HD) Audio specification was developed by Intel as the
logical successor of the old AC'97 specification and has several advantages,
such as higher bandwidth which allows more channels and more detailed formats,
support for several logical audio devices, and general purpose DMA channels.
.Pp
The HDA specification defines the register-level interface, physical link
characteristics, codec programming models, and codec architectural components.
This specification is intended for both device driver developers and hardware
component designers.
.Ss Boot-time Configuration
The following variables are available at boot-time through the
.Xr device.hints 5
file:
.Bl -tag -width ".Va hint.pcm.%d.config" -offset indent
.It Va hint.pcm.%d.config
Configures a range of possible options.
Possible values are:
.Dq Li dmapos ,
.Dq Li eapdinv ,
.Dq Li gpio0 ,
.Dq Li gpio1 ,
.Dq Li gpio2 ,
.Dq Li gpio3 ,
.Dq Li gpio4 ,
.Dq Li gpio5 ,
.Dq Li gpio6 ,
.Dq Li gpio7 ,
.Dq Li gpioflush ,
.Dq Li ivref ,
.Dq Li ivref50 ,
.Dq Li ivref80 ,
.Dq Li ivref100 ,
.Dq Li fixedrate ,
.Dq Li forcestereo ,
.Dq Li ovref ,
.Dq Li ovref50 ,
.Dq Li ovref80 ,
.Dq Li ovref100 ,
.Dq Li softpcmvol ,
and
.Dq Li vref .
An option prefixed with
.Dq Li no ,
such as
.Dq Li nofixedrate ,
will do the opposite and takes precedence.
Options can be separated by whitespace and commas.
.El
.Ss Runtime Configuration
The following
.Xr sysctl 8
variables are available in addition to those available to all
.Xr sound 4
devices:
.Bl -tag -width ".Va dev.pcm.%d.polling" -offset indent
.It Va dev.pcm.%d.polling
Experimental polling mode, where the driver operates by querying the device
state on each tick using
.Xr callout 9 .
Polling is disabled by default.
Do not enable it unless you are facing weird interrupt problems or if the
device cannot generate interrupts at all.
.El
.Sh HARDWARE
The
.Nm
driver supports the following audio chipsets:
.Pp
.Bl -bullet -compact
.It
ATI SB450
.It
ATI SB600
.It
Intel 631x/632xESB
.It
Intel 82801F
.It
Intel 82801G
.It
Intel 82801H
.It
Intel 82801I
.It
nVidia MCP51
.It
nVidia MCP55
.It
nVidia MCP61A
.It
nVidia MCP61B
.It
nVidia MCP65A
.It
nVidia MCP65B
.It
SiS 966
.It
VIA VT8251/8237A
.El
.Pp
Generic audio chipsets compatible with the Intel HDA specification should work,
but have not been verified yet.
The following codecs have been verified to work:
.Pp
.Bl -bullet -compact
.It
Analog Devices AD1981HD
.It
Analog Devices AD1983
.It
Analog Devices AD1986A
.It
Analog Devices AD1988
.It
Analog Devices AD1988B
.It
CMedia CMI9880
.It
Conexant Venice
.It
Conexant Waikiki
.It
Realtek ALC260
.It
Realtek ALC262
.It
Realtek ALC268
.It
Realtek ALC660
.It
Realtek ALC861
.It
Realtek ALC861VD
.It
Realtek ALC880
.It
Realtek ALC882
.It
Realtek ALC883
.It
Realtek ALC885
.It
Realtek ALC888
.It
Sigmatel STAC9220
.It
Sigmatel STAC9220D/9223D
.It
Sigmatel STAC9221
.It
Sigmatel STAC9221D
.It
Sigmatel STAC9227
.It
Sigmatel STAC9271D
.It
VIA VT1708
.It
VIA VT1709
.El
.Sh SEE ALSO
.Xr sound 4 ,
.Xr device.hints 5 ,
.Xr loader.conf 5 ,
.Xr sysctl 8
.Sh HISTORY
The
.Nm
device driver first appeared in
.Fx 7.0 .
.Sh AUTHORS
.An -nosplit
The
.Nm
driver was written by
.An Stephane E. Potvin Aq sepotvin@videotron.ca
and
.An Ariff Abdullah Aq ariff@FreeBSD.org .
This manual page was written by
.An Joel Dahl Aq joel@FreeBSD.org .
.Sh BUGS
There are a couple of missing features, such as support for Digital
S/PDIF and multichannel output.
.Pp
A few Hardware/OEM vendors tend to screw up BIOS settings, thus
rendering the
.Nm
driver useless, which usually results in a state where the
.Nm
driver seems to attach and work, but without any sound.