8bb601ac8a
If a SCSI IO times out, then before initiating OCR, now the driver will try to send a target reset to the particular target for which the IO is timed out. If that also fails, then the driver will initiate OCR. Submitted by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com> MFC after: 3 days Sponsored by: Broadcom Limited/AVAGO Technologies
1686 lines
50 KiB
C
1686 lines
50 KiB
C
/*
|
|
* Copyright (c) 2015, AVAGO Tech. All rights reserved. Author: Marian Choy
|
|
* Copyright (c) 2014, LSI Corp. All rights reserved. Author: Marian Choy
|
|
* Support: freebsdraid@avagotech.com
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer. 2. Redistributions
|
|
* in binary form must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution. 3. Neither the name of the
|
|
* <ORGANIZATION> nor the names of its contributors may be used to endorse or
|
|
* promote products derived from this software without specific prior written
|
|
* permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "dev/mrsas/mrsas.h"
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
#include <cam/cam_debug.h>
|
|
#include <cam/cam_periph.h>
|
|
#include <cam/cam_xpt_periph.h>
|
|
|
|
#include <cam/scsi/scsi_all.h>
|
|
#include <cam/scsi/scsi_message.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/kernel.h>
|
|
|
|
|
|
#include <sys/time.h> /* XXX for pcpu.h */
|
|
#include <sys/pcpu.h> /* XXX for PCPU_GET */
|
|
|
|
#define smp_processor_id() PCPU_GET(cpuid)
|
|
|
|
/*
|
|
* Function prototypes
|
|
*/
|
|
int mrsas_cam_attach(struct mrsas_softc *sc);
|
|
int mrsas_find_io_type(struct cam_sim *sim, union ccb *ccb);
|
|
int mrsas_bus_scan(struct mrsas_softc *sc);
|
|
int mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim);
|
|
int
|
|
mrsas_map_request(struct mrsas_softc *sc,
|
|
struct mrsas_mpt_cmd *cmd, union ccb *ccb);
|
|
int
|
|
mrsas_build_ldio_rw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb);
|
|
int
|
|
mrsas_build_ldio_nonrw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb);
|
|
int
|
|
mrsas_build_syspdio(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb, struct cam_sim *sim, u_int8_t fp_possible);
|
|
int
|
|
mrsas_setup_io(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb, u_int32_t device_id,
|
|
MRSAS_RAID_SCSI_IO_REQUEST * io_request);
|
|
void mrsas_xpt_freeze(struct mrsas_softc *sc);
|
|
void mrsas_xpt_release(struct mrsas_softc *sc);
|
|
void mrsas_cam_detach(struct mrsas_softc *sc);
|
|
void mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd);
|
|
void mrsas_unmap_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd);
|
|
void mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd);
|
|
void
|
|
mrsas_fire_cmd(struct mrsas_softc *sc, u_int32_t req_desc_lo,
|
|
u_int32_t req_desc_hi);
|
|
void
|
|
mrsas_set_pd_lba(MRSAS_RAID_SCSI_IO_REQUEST * io_request,
|
|
u_int8_t cdb_len, struct IO_REQUEST_INFO *io_info, union ccb *ccb,
|
|
MR_DRV_RAID_MAP_ALL * local_map_ptr, u_int32_t ref_tag,
|
|
u_int32_t ld_block_size);
|
|
static void mrsas_freeze_simq(struct mrsas_mpt_cmd *cmd, struct cam_sim *sim);
|
|
static void mrsas_cam_poll(struct cam_sim *sim);
|
|
static void mrsas_action(struct cam_sim *sim, union ccb *ccb);
|
|
static void mrsas_scsiio_timeout(void *data);
|
|
static int mrsas_track_scsiio(struct mrsas_softc *sc, target_id_t id, u_int32_t bus_id);
|
|
static void mrsas_tm_response_code(struct mrsas_softc *sc,
|
|
MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply);
|
|
static int mrsas_issue_tm(struct mrsas_softc *sc,
|
|
MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc);
|
|
static void
|
|
mrsas_data_load_cb(void *arg, bus_dma_segment_t *segs,
|
|
int nseg, int error);
|
|
static int32_t
|
|
mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim,
|
|
union ccb *ccb);
|
|
struct mrsas_mpt_cmd *mrsas_get_mpt_cmd(struct mrsas_softc *sc);
|
|
MRSAS_REQUEST_DESCRIPTOR_UNION *
|
|
mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index);
|
|
|
|
extern void
|
|
mrsas_map_mpt_cmd_status(struct mrsas_mpt_cmd *cmd, u_int8_t status,
|
|
u_int8_t extStatus);
|
|
extern int mrsas_reset_targets(struct mrsas_softc *sc);
|
|
extern u_int16_t MR_TargetIdToLdGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map);
|
|
extern u_int32_t
|
|
MR_LdBlockSizeGet(u_int32_t ldTgtId, MR_DRV_RAID_MAP_ALL * map,
|
|
struct mrsas_softc *sc);
|
|
extern void mrsas_isr(void *arg);
|
|
extern void mrsas_aen_handler(struct mrsas_softc *sc);
|
|
extern u_int8_t
|
|
MR_BuildRaidContext(struct mrsas_softc *sc,
|
|
struct IO_REQUEST_INFO *io_info, RAID_CONTEXT * pRAID_Context,
|
|
MR_DRV_RAID_MAP_ALL * map);
|
|
extern u_int16_t
|
|
MR_LdSpanArrayGet(u_int32_t ld, u_int32_t span,
|
|
MR_DRV_RAID_MAP_ALL * map);
|
|
extern u_int16_t
|
|
mrsas_get_updated_dev_handle(struct mrsas_softc *sc,
|
|
PLD_LOAD_BALANCE_INFO lbInfo, struct IO_REQUEST_INFO *io_info);
|
|
extern u_int8_t
|
|
megasas_get_best_arm(PLD_LOAD_BALANCE_INFO lbInfo, u_int8_t arm,
|
|
u_int64_t block, u_int32_t count);
|
|
extern int mrsas_complete_cmd(struct mrsas_softc *sc, u_int32_t MSIxIndex);
|
|
extern MR_LD_RAID *MR_LdRaidGet(u_int32_t ld, MR_DRV_RAID_MAP_ALL * map);
|
|
extern void mrsas_disable_intr(struct mrsas_softc *sc);
|
|
extern void mrsas_enable_intr(struct mrsas_softc *sc);
|
|
|
|
|
|
/*
|
|
* mrsas_cam_attach: Main entry to CAM subsystem
|
|
* input: Adapter instance soft state
|
|
*
|
|
* This function is called from mrsas_attach() during initialization to perform
|
|
* SIM allocations and XPT bus registration. If the kernel version is 7.4 or
|
|
* earlier, it would also initiate a bus scan.
|
|
*/
|
|
int
|
|
mrsas_cam_attach(struct mrsas_softc *sc)
|
|
{
|
|
struct cam_devq *devq;
|
|
int mrsas_cam_depth;
|
|
|
|
mrsas_cam_depth = sc->max_fw_cmds - MRSAS_INTERNAL_CMDS;
|
|
|
|
if ((devq = cam_simq_alloc(mrsas_cam_depth)) == NULL) {
|
|
device_printf(sc->mrsas_dev, "Cannot allocate SIM queue\n");
|
|
return (ENOMEM);
|
|
}
|
|
/*
|
|
* Create SIM for bus 0 and register, also create path
|
|
*/
|
|
sc->sim_0 = cam_sim_alloc(mrsas_action, mrsas_cam_poll, "mrsas", sc,
|
|
device_get_unit(sc->mrsas_dev), &sc->sim_lock, mrsas_cam_depth,
|
|
mrsas_cam_depth, devq);
|
|
if (sc->sim_0 == NULL) {
|
|
cam_simq_free(devq);
|
|
device_printf(sc->mrsas_dev, "Cannot register SIM\n");
|
|
return (ENXIO);
|
|
}
|
|
/* Initialize taskqueue for Event Handling */
|
|
TASK_INIT(&sc->ev_task, 0, (void *)mrsas_aen_handler, sc);
|
|
sc->ev_tq = taskqueue_create("mrsas_taskq", M_NOWAIT | M_ZERO,
|
|
taskqueue_thread_enqueue, &sc->ev_tq);
|
|
|
|
/* Run the task queue with lowest priority */
|
|
taskqueue_start_threads(&sc->ev_tq, 1, 255, "%s taskq",
|
|
device_get_nameunit(sc->mrsas_dev));
|
|
mtx_lock(&sc->sim_lock);
|
|
if (xpt_bus_register(sc->sim_0, sc->mrsas_dev, 0) != CAM_SUCCESS) {
|
|
cam_sim_free(sc->sim_0, TRUE); /* passing true frees the devq */
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (ENXIO);
|
|
}
|
|
if (xpt_create_path(&sc->path_0, NULL, cam_sim_path(sc->sim_0),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_bus_deregister(cam_sim_path(sc->sim_0));
|
|
cam_sim_free(sc->sim_0, TRUE); /* passing true will free the
|
|
* devq */
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (ENXIO);
|
|
}
|
|
mtx_unlock(&sc->sim_lock);
|
|
|
|
/*
|
|
* Create SIM for bus 1 and register, also create path
|
|
*/
|
|
sc->sim_1 = cam_sim_alloc(mrsas_action, mrsas_cam_poll, "mrsas", sc,
|
|
device_get_unit(sc->mrsas_dev), &sc->sim_lock, mrsas_cam_depth,
|
|
mrsas_cam_depth, devq);
|
|
if (sc->sim_1 == NULL) {
|
|
cam_simq_free(devq);
|
|
device_printf(sc->mrsas_dev, "Cannot register SIM\n");
|
|
return (ENXIO);
|
|
}
|
|
mtx_lock(&sc->sim_lock);
|
|
if (xpt_bus_register(sc->sim_1, sc->mrsas_dev, 1) != CAM_SUCCESS) {
|
|
cam_sim_free(sc->sim_1, TRUE); /* passing true frees the devq */
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (ENXIO);
|
|
}
|
|
if (xpt_create_path(&sc->path_1, NULL, cam_sim_path(sc->sim_1),
|
|
CAM_TARGET_WILDCARD,
|
|
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_bus_deregister(cam_sim_path(sc->sim_1));
|
|
cam_sim_free(sc->sim_1, TRUE);
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (ENXIO);
|
|
}
|
|
mtx_unlock(&sc->sim_lock);
|
|
|
|
#if (__FreeBSD_version <= 704000)
|
|
if (mrsas_bus_scan(sc)) {
|
|
device_printf(sc->mrsas_dev, "Error in bus scan.\n");
|
|
return (1);
|
|
}
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_cam_detach: De-allocates and teardown CAM
|
|
* input: Adapter instance soft state
|
|
*
|
|
* De-registers and frees the paths and SIMs.
|
|
*/
|
|
void
|
|
mrsas_cam_detach(struct mrsas_softc *sc)
|
|
{
|
|
if (sc->ev_tq != NULL)
|
|
taskqueue_free(sc->ev_tq);
|
|
mtx_lock(&sc->sim_lock);
|
|
if (sc->path_0)
|
|
xpt_free_path(sc->path_0);
|
|
if (sc->sim_0) {
|
|
xpt_bus_deregister(cam_sim_path(sc->sim_0));
|
|
cam_sim_free(sc->sim_0, FALSE);
|
|
}
|
|
if (sc->path_1)
|
|
xpt_free_path(sc->path_1);
|
|
if (sc->sim_1) {
|
|
xpt_bus_deregister(cam_sim_path(sc->sim_1));
|
|
cam_sim_free(sc->sim_1, TRUE);
|
|
}
|
|
mtx_unlock(&sc->sim_lock);
|
|
}
|
|
|
|
/*
|
|
* mrsas_action: SIM callback entry point
|
|
* input: pointer to SIM pointer to CAM Control Block
|
|
*
|
|
* This function processes CAM subsystem requests. The type of request is stored
|
|
* in ccb->ccb_h.func_code. The preprocessor #ifdef is necessary because
|
|
* ccb->cpi.maxio is not supported for FreeBSD version 7.4 or earlier.
|
|
*/
|
|
static void
|
|
mrsas_action(struct cam_sim *sim, union ccb *ccb)
|
|
{
|
|
struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim);
|
|
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
|
|
u_int32_t device_id;
|
|
|
|
/*
|
|
* Check if the system going down
|
|
* or the adapter is in unrecoverable critical error
|
|
*/
|
|
if (sc->remove_in_progress ||
|
|
(sc->adprecovery == MRSAS_HW_CRITICAL_ERROR)) {
|
|
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
|
|
switch (ccb->ccb_h.func_code) {
|
|
case XPT_SCSI_IO:
|
|
{
|
|
device_id = ccb_h->target_id;
|
|
|
|
/*
|
|
* bus 0 is LD, bus 1 is for system-PD
|
|
*/
|
|
if (cam_sim_bus(sim) == 1 &&
|
|
sc->pd_list[device_id].driveState != MR_PD_STATE_SYSTEM) {
|
|
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
|
|
xpt_done(ccb);
|
|
} else {
|
|
if (mrsas_startio(sc, sim, ccb)) {
|
|
ccb->ccb_h.status |= CAM_REQ_INVALID;
|
|
xpt_done(ccb);
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
case XPT_ABORT:
|
|
{
|
|
ccb->ccb_h.status = CAM_UA_ABORT;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_RESET_BUS:
|
|
{
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_GET_TRAN_SETTINGS:
|
|
{
|
|
ccb->cts.protocol = PROTO_SCSI;
|
|
ccb->cts.protocol_version = SCSI_REV_2;
|
|
ccb->cts.transport = XPORT_SPI;
|
|
ccb->cts.transport_version = 2;
|
|
ccb->cts.xport_specific.spi.valid = CTS_SPI_VALID_DISC;
|
|
ccb->cts.xport_specific.spi.flags = CTS_SPI_FLAGS_DISC_ENB;
|
|
ccb->cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ;
|
|
ccb->cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_SET_TRAN_SETTINGS:
|
|
{
|
|
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_CALC_GEOMETRY:
|
|
{
|
|
cam_calc_geometry(&ccb->ccg, 1);
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_PATH_INQ:
|
|
{
|
|
ccb->cpi.version_num = 1;
|
|
ccb->cpi.hba_inquiry = 0;
|
|
ccb->cpi.target_sprt = 0;
|
|
#if (__FreeBSD_version >= 902001)
|
|
ccb->cpi.hba_misc = PIM_UNMAPPED;
|
|
#else
|
|
ccb->cpi.hba_misc = 0;
|
|
#endif
|
|
ccb->cpi.hba_eng_cnt = 0;
|
|
ccb->cpi.max_lun = MRSAS_SCSI_MAX_LUNS;
|
|
ccb->cpi.unit_number = cam_sim_unit(sim);
|
|
ccb->cpi.bus_id = cam_sim_bus(sim);
|
|
ccb->cpi.initiator_id = MRSAS_SCSI_INITIATOR_ID;
|
|
ccb->cpi.base_transfer_speed = 150000;
|
|
strncpy(ccb->cpi.sim_vid, "FreeBSD", SIM_IDLEN);
|
|
strncpy(ccb->cpi.hba_vid, "AVAGO", HBA_IDLEN);
|
|
strncpy(ccb->cpi.dev_name, cam_sim_name(sim), DEV_IDLEN);
|
|
ccb->cpi.transport = XPORT_SPI;
|
|
ccb->cpi.transport_version = 2;
|
|
ccb->cpi.protocol = PROTO_SCSI;
|
|
ccb->cpi.protocol_version = SCSI_REV_2;
|
|
if (ccb->cpi.bus_id == 0)
|
|
ccb->cpi.max_target = MRSAS_MAX_PD - 1;
|
|
else
|
|
ccb->cpi.max_target = MRSAS_MAX_LD_IDS - 1;
|
|
#if (__FreeBSD_version > 704000)
|
|
ccb->cpi.maxio = sc->max_num_sge * MRSAS_PAGE_SIZE;
|
|
#endif
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
default:
|
|
{
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mrsas_scsiio_timeout: Callback function for IO timed out
|
|
* input: mpt command context
|
|
*
|
|
* This function will execute after timeout value provided by ccb header from
|
|
* CAM layer, if timer expires. Driver will run timer for all DCDM and LDIO
|
|
* coming from CAM layer. This function is callback function for IO timeout
|
|
* and it runs in no-sleep context. Set do_timedout_reset in Adapter context
|
|
* so that it will execute OCR/Kill adpter from ocr_thread context.
|
|
*/
|
|
static void
|
|
mrsas_scsiio_timeout(void *data)
|
|
{
|
|
struct mrsas_mpt_cmd *cmd;
|
|
struct mrsas_softc *sc;
|
|
u_int32_t target_id;
|
|
|
|
if (!data)
|
|
return;
|
|
|
|
cmd = (struct mrsas_mpt_cmd *)data;
|
|
sc = cmd->sc;
|
|
|
|
if (cmd->ccb_ptr == NULL) {
|
|
printf("command timeout with NULL ccb\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Below callout is dummy entry so that it will be cancelled from
|
|
* mrsas_cmd_done(). Now Controller will go to OCR/Kill Adapter based
|
|
* on OCR enable/disable property of Controller from ocr_thread
|
|
* context.
|
|
*/
|
|
#if (__FreeBSD_version >= 1000510)
|
|
callout_reset_sbt(&cmd->cm_callout, SBT_1S * 180, 0,
|
|
mrsas_scsiio_timeout, cmd, 0);
|
|
#else
|
|
callout_reset(&cmd->cm_callout, (180000 * hz) / 1000,
|
|
mrsas_scsiio_timeout, cmd);
|
|
#endif
|
|
|
|
if (cmd->ccb_ptr->cpi.bus_id == 0)
|
|
target_id = cmd->ccb_ptr->ccb_h.target_id;
|
|
else
|
|
target_id = (cmd->ccb_ptr->ccb_h.target_id + (MRSAS_MAX_PD - 1));
|
|
|
|
/* Save the cmd to be processed for TM, if it is not there in the array */
|
|
if (sc->target_reset_pool[target_id] == NULL) {
|
|
sc->target_reset_pool[target_id] = cmd;
|
|
mrsas_atomic_inc(&sc->target_reset_outstanding);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* mrsas_startio: SCSI IO entry point
|
|
* input: Adapter instance soft state
|
|
* pointer to CAM Control Block
|
|
*
|
|
* This function is the SCSI IO entry point and it initiates IO processing. It
|
|
* copies the IO and depending if the IO is read/write or inquiry, it would
|
|
* call mrsas_build_ldio() or mrsas_build_dcdb(), respectively. It returns 0
|
|
* if the command is sent to firmware successfully, otherwise it returns 1.
|
|
*/
|
|
static int32_t
|
|
mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim,
|
|
union ccb *ccb)
|
|
{
|
|
struct mrsas_mpt_cmd *cmd;
|
|
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
|
|
struct ccb_scsiio *csio = &(ccb->csio);
|
|
MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc;
|
|
u_int8_t cmd_type;
|
|
|
|
if ((csio->cdb_io.cdb_bytes[0]) == SYNCHRONIZE_CACHE) {
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
return (0);
|
|
}
|
|
ccb_h->status |= CAM_SIM_QUEUED;
|
|
cmd = mrsas_get_mpt_cmd(sc);
|
|
|
|
if (!cmd) {
|
|
ccb_h->status |= CAM_REQUEUE_REQ;
|
|
xpt_done(ccb);
|
|
return (0);
|
|
}
|
|
if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
|
|
if (ccb_h->flags & CAM_DIR_IN)
|
|
cmd->flags |= MRSAS_DIR_IN;
|
|
if (ccb_h->flags & CAM_DIR_OUT)
|
|
cmd->flags |= MRSAS_DIR_OUT;
|
|
} else
|
|
cmd->flags = MRSAS_DIR_NONE; /* no data */
|
|
|
|
/* For FreeBSD 9.2 and higher */
|
|
#if (__FreeBSD_version >= 902001)
|
|
/*
|
|
* XXX We don't yet support physical addresses here.
|
|
*/
|
|
switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) {
|
|
case CAM_DATA_PADDR:
|
|
case CAM_DATA_SG_PADDR:
|
|
device_printf(sc->mrsas_dev, "%s: physical addresses not supported\n",
|
|
__func__);
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_INVALID;
|
|
ccb_h->status &= ~CAM_SIM_QUEUED;
|
|
goto done;
|
|
case CAM_DATA_SG:
|
|
device_printf(sc->mrsas_dev, "%s: scatter gather is not supported\n",
|
|
__func__);
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_INVALID;
|
|
goto done;
|
|
case CAM_DATA_VADDR:
|
|
if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) {
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_TOO_BIG;
|
|
goto done;
|
|
}
|
|
cmd->length = csio->dxfer_len;
|
|
if (cmd->length)
|
|
cmd->data = csio->data_ptr;
|
|
break;
|
|
case CAM_DATA_BIO:
|
|
if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) {
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_TOO_BIG;
|
|
goto done;
|
|
}
|
|
cmd->length = csio->dxfer_len;
|
|
if (cmd->length)
|
|
cmd->data = csio->data_ptr;
|
|
break;
|
|
default:
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
goto done;
|
|
}
|
|
#else
|
|
if (!(ccb_h->flags & CAM_DATA_PHYS)) { /* Virtual data address */
|
|
if (!(ccb_h->flags & CAM_SCATTER_VALID)) {
|
|
if (csio->dxfer_len > (sc->max_num_sge * MRSAS_PAGE_SIZE)) {
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_TOO_BIG;
|
|
goto done;
|
|
}
|
|
cmd->length = csio->dxfer_len;
|
|
if (cmd->length)
|
|
cmd->data = csio->data_ptr;
|
|
} else {
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_INVALID;
|
|
goto done;
|
|
}
|
|
} else { /* Data addresses are physical. */
|
|
mrsas_release_mpt_cmd(cmd);
|
|
ccb_h->status = CAM_REQ_INVALID;
|
|
ccb_h->status &= ~CAM_SIM_QUEUED;
|
|
goto done;
|
|
}
|
|
#endif
|
|
/* save ccb ptr */
|
|
cmd->ccb_ptr = ccb;
|
|
|
|
req_desc = mrsas_get_request_desc(sc, (cmd->index) - 1);
|
|
if (!req_desc) {
|
|
device_printf(sc->mrsas_dev, "Cannot get request_descriptor.\n");
|
|
return (FAIL);
|
|
}
|
|
memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION));
|
|
cmd->request_desc = req_desc;
|
|
|
|
if (ccb_h->flags & CAM_CDB_POINTER)
|
|
bcopy(csio->cdb_io.cdb_ptr, cmd->io_request->CDB.CDB32, csio->cdb_len);
|
|
else
|
|
bcopy(csio->cdb_io.cdb_bytes, cmd->io_request->CDB.CDB32, csio->cdb_len);
|
|
mtx_lock(&sc->raidmap_lock);
|
|
|
|
/* Check for IO type READ-WRITE targeted for Logical Volume */
|
|
cmd_type = mrsas_find_io_type(sim, ccb);
|
|
switch (cmd_type) {
|
|
case READ_WRITE_LDIO:
|
|
/* Build READ-WRITE IO for Logical Volume */
|
|
if (mrsas_build_ldio_rw(sc, cmd, ccb)) {
|
|
device_printf(sc->mrsas_dev, "Build RW LDIO failed.\n");
|
|
mtx_unlock(&sc->raidmap_lock);
|
|
return (1);
|
|
}
|
|
break;
|
|
case NON_READ_WRITE_LDIO:
|
|
/* Build NON READ-WRITE IO for Logical Volume */
|
|
if (mrsas_build_ldio_nonrw(sc, cmd, ccb)) {
|
|
device_printf(sc->mrsas_dev, "Build NON-RW LDIO failed.\n");
|
|
mtx_unlock(&sc->raidmap_lock);
|
|
return (1);
|
|
}
|
|
break;
|
|
case READ_WRITE_SYSPDIO:
|
|
case NON_READ_WRITE_SYSPDIO:
|
|
if (sc->secure_jbod_support &&
|
|
(cmd_type == NON_READ_WRITE_SYSPDIO)) {
|
|
/* Build NON-RW IO for JBOD */
|
|
if (mrsas_build_syspdio(sc, cmd, ccb, sim, 0)) {
|
|
device_printf(sc->mrsas_dev,
|
|
"Build SYSPDIO failed.\n");
|
|
mtx_unlock(&sc->raidmap_lock);
|
|
return (1);
|
|
}
|
|
} else {
|
|
/* Build RW IO for JBOD */
|
|
if (mrsas_build_syspdio(sc, cmd, ccb, sim, 1)) {
|
|
device_printf(sc->mrsas_dev,
|
|
"Build SYSPDIO failed.\n");
|
|
mtx_unlock(&sc->raidmap_lock);
|
|
return (1);
|
|
}
|
|
}
|
|
}
|
|
mtx_unlock(&sc->raidmap_lock);
|
|
|
|
if (cmd->flags == MRSAS_DIR_IN) /* from device */
|
|
cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_READ;
|
|
else if (cmd->flags == MRSAS_DIR_OUT) /* to device */
|
|
cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_WRITE;
|
|
|
|
cmd->io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING;
|
|
cmd->io_request->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL) / 4;
|
|
cmd->io_request->SenseBufferLowAddress = cmd->sense_phys_addr;
|
|
cmd->io_request->SenseBufferLength = MRSAS_SCSI_SENSE_BUFFERSIZE;
|
|
|
|
req_desc = cmd->request_desc;
|
|
req_desc->SCSIIO.SMID = cmd->index;
|
|
|
|
/*
|
|
* Start timer for IO timeout. Default timeout value is 90 second.
|
|
*/
|
|
#if (__FreeBSD_version >= 1000510)
|
|
callout_reset_sbt(&cmd->cm_callout, SBT_1S * 180, 0,
|
|
mrsas_scsiio_timeout, cmd, 0);
|
|
#else
|
|
callout_reset(&cmd->cm_callout, (180000 * hz) / 1000,
|
|
mrsas_scsiio_timeout, cmd);
|
|
#endif
|
|
mrsas_atomic_inc(&sc->fw_outstanding);
|
|
|
|
if (mrsas_atomic_read(&sc->fw_outstanding) > sc->io_cmds_highwater)
|
|
sc->io_cmds_highwater++;
|
|
|
|
mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high);
|
|
return (0);
|
|
|
|
done:
|
|
xpt_done(ccb);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_find_io_type: Determines if IO is read/write or inquiry
|
|
* input: pointer to CAM Control Block
|
|
*
|
|
* This function determines if the IO is read/write or inquiry. It returns a 1
|
|
* if the IO is read/write and 0 if it is inquiry.
|
|
*/
|
|
int
|
|
mrsas_find_io_type(struct cam_sim *sim, union ccb *ccb)
|
|
{
|
|
struct ccb_scsiio *csio = &(ccb->csio);
|
|
|
|
switch (csio->cdb_io.cdb_bytes[0]) {
|
|
case READ_10:
|
|
case WRITE_10:
|
|
case READ_12:
|
|
case WRITE_12:
|
|
case READ_6:
|
|
case WRITE_6:
|
|
case READ_16:
|
|
case WRITE_16:
|
|
return (cam_sim_bus(sim) ?
|
|
READ_WRITE_SYSPDIO : READ_WRITE_LDIO);
|
|
default:
|
|
return (cam_sim_bus(sim) ?
|
|
NON_READ_WRITE_SYSPDIO : NON_READ_WRITE_LDIO);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mrsas_get_mpt_cmd: Get a cmd from free command pool
|
|
* input: Adapter instance soft state
|
|
*
|
|
* This function removes an MPT command from the command free list and
|
|
* initializes it.
|
|
*/
|
|
struct mrsas_mpt_cmd *
|
|
mrsas_get_mpt_cmd(struct mrsas_softc *sc)
|
|
{
|
|
struct mrsas_mpt_cmd *cmd = NULL;
|
|
|
|
mtx_lock(&sc->mpt_cmd_pool_lock);
|
|
if (!TAILQ_EMPTY(&sc->mrsas_mpt_cmd_list_head)) {
|
|
cmd = TAILQ_FIRST(&sc->mrsas_mpt_cmd_list_head);
|
|
TAILQ_REMOVE(&sc->mrsas_mpt_cmd_list_head, cmd, next);
|
|
} else {
|
|
goto out;
|
|
}
|
|
|
|
memset((uint8_t *)cmd->io_request, 0, MRSAS_MPI2_RAID_DEFAULT_IO_FRAME_SIZE);
|
|
cmd->data = NULL;
|
|
cmd->length = 0;
|
|
cmd->flags = 0;
|
|
cmd->error_code = 0;
|
|
cmd->load_balance = 0;
|
|
cmd->ccb_ptr = NULL;
|
|
|
|
out:
|
|
mtx_unlock(&sc->mpt_cmd_pool_lock);
|
|
return cmd;
|
|
}
|
|
|
|
/*
|
|
* mrsas_release_mpt_cmd: Return a cmd to free command pool
|
|
* input: Command packet for return to free command pool
|
|
*
|
|
* This function returns an MPT command to the free command list.
|
|
*/
|
|
void
|
|
mrsas_release_mpt_cmd(struct mrsas_mpt_cmd *cmd)
|
|
{
|
|
struct mrsas_softc *sc = cmd->sc;
|
|
|
|
mtx_lock(&sc->mpt_cmd_pool_lock);
|
|
cmd->sync_cmd_idx = (u_int32_t)MRSAS_ULONG_MAX;
|
|
TAILQ_INSERT_HEAD(&(sc->mrsas_mpt_cmd_list_head), cmd, next);
|
|
mtx_unlock(&sc->mpt_cmd_pool_lock);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* mrsas_get_request_desc: Get request descriptor from array
|
|
* input: Adapter instance soft state
|
|
* SMID index
|
|
*
|
|
* This function returns a pointer to the request descriptor.
|
|
*/
|
|
MRSAS_REQUEST_DESCRIPTOR_UNION *
|
|
mrsas_get_request_desc(struct mrsas_softc *sc, u_int16_t index)
|
|
{
|
|
u_int8_t *p;
|
|
|
|
if (index >= sc->max_fw_cmds) {
|
|
device_printf(sc->mrsas_dev, "Invalid SMID (0x%x)request for desc\n", index);
|
|
return NULL;
|
|
}
|
|
p = sc->req_desc + sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION) * index;
|
|
|
|
return (MRSAS_REQUEST_DESCRIPTOR_UNION *) p;
|
|
}
|
|
|
|
/*
|
|
* mrsas_build_ldio_rw: Builds an LDIO command
|
|
* input: Adapter instance soft state
|
|
* Pointer to command packet
|
|
* Pointer to CCB
|
|
*
|
|
* This function builds the LDIO command packet. It returns 0 if the command is
|
|
* built successfully, otherwise it returns a 1.
|
|
*/
|
|
int
|
|
mrsas_build_ldio_rw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb)
|
|
{
|
|
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
|
|
struct ccb_scsiio *csio = &(ccb->csio);
|
|
u_int32_t device_id;
|
|
MRSAS_RAID_SCSI_IO_REQUEST *io_request;
|
|
|
|
device_id = ccb_h->target_id;
|
|
|
|
io_request = cmd->io_request;
|
|
io_request->RaidContext.VirtualDiskTgtId = device_id;
|
|
io_request->RaidContext.status = 0;
|
|
io_request->RaidContext.exStatus = 0;
|
|
|
|
/* just the cdb len, other flags zero, and ORed-in later for FP */
|
|
io_request->IoFlags = csio->cdb_len;
|
|
|
|
if (mrsas_setup_io(sc, cmd, ccb, device_id, io_request) != SUCCESS)
|
|
device_printf(sc->mrsas_dev, "Build ldio or fpio error\n");
|
|
|
|
io_request->DataLength = cmd->length;
|
|
|
|
if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) {
|
|
if (cmd->sge_count > sc->max_num_sge) {
|
|
device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds"
|
|
"max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge);
|
|
return (FAIL);
|
|
}
|
|
/*
|
|
* numSGE store lower 8 bit of sge_count. numSGEExt store
|
|
* higher 8 bit of sge_count
|
|
*/
|
|
io_request->RaidContext.numSGE = cmd->sge_count;
|
|
io_request->RaidContext.numSGEExt = (uint8_t)(cmd->sge_count >> 8);
|
|
|
|
} else {
|
|
device_printf(sc->mrsas_dev, "Data map/load failed.\n");
|
|
return (FAIL);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_setup_io: Set up data including Fast Path I/O
|
|
* input: Adapter instance soft state
|
|
* Pointer to command packet
|
|
* Pointer to CCB
|
|
*
|
|
* This function builds the DCDB inquiry command. It returns 0 if the command
|
|
* is built successfully, otherwise it returns a 1.
|
|
*/
|
|
int
|
|
mrsas_setup_io(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb, u_int32_t device_id,
|
|
MRSAS_RAID_SCSI_IO_REQUEST * io_request)
|
|
{
|
|
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
|
|
struct ccb_scsiio *csio = &(ccb->csio);
|
|
struct IO_REQUEST_INFO io_info;
|
|
MR_DRV_RAID_MAP_ALL *map_ptr;
|
|
MR_LD_RAID *raid;
|
|
u_int8_t fp_possible;
|
|
u_int32_t start_lba_hi, start_lba_lo, ld_block_size, ld;
|
|
u_int32_t datalength = 0;
|
|
|
|
start_lba_lo = 0;
|
|
start_lba_hi = 0;
|
|
fp_possible = 0;
|
|
|
|
/*
|
|
* READ_6 (0x08) or WRITE_6 (0x0A) cdb
|
|
*/
|
|
if (csio->cdb_len == 6) {
|
|
datalength = (u_int32_t)csio->cdb_io.cdb_bytes[4];
|
|
start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[1] << 16) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[2] << 8) |
|
|
(u_int32_t)csio->cdb_io.cdb_bytes[3];
|
|
start_lba_lo &= 0x1FFFFF;
|
|
}
|
|
/*
|
|
* READ_10 (0x28) or WRITE_6 (0x2A) cdb
|
|
*/
|
|
else if (csio->cdb_len == 10) {
|
|
datalength = (u_int32_t)csio->cdb_io.cdb_bytes[8] |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[7] << 8);
|
|
start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) |
|
|
(u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[5]);
|
|
}
|
|
/*
|
|
* READ_12 (0xA8) or WRITE_12 (0xAA) cdb
|
|
*/
|
|
else if (csio->cdb_len == 12) {
|
|
datalength = (u_int32_t)csio->cdb_io.cdb_bytes[6] << 24 |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[7] << 16) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[8] << 8) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[9]);
|
|
start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) |
|
|
(u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[5]);
|
|
}
|
|
/*
|
|
* READ_16 (0x88) or WRITE_16 (0xx8A) cdb
|
|
*/
|
|
else if (csio->cdb_len == 16) {
|
|
datalength = (u_int32_t)csio->cdb_io.cdb_bytes[10] << 24 |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[11] << 16) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[12] << 8) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[13]);
|
|
start_lba_lo = ((u_int32_t)csio->cdb_io.cdb_bytes[6] << 24) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[7] << 16) |
|
|
(u_int32_t)csio->cdb_io.cdb_bytes[8] << 8 |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[9]);
|
|
start_lba_hi = ((u_int32_t)csio->cdb_io.cdb_bytes[2] << 24) |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[3] << 16) |
|
|
(u_int32_t)csio->cdb_io.cdb_bytes[4] << 8 |
|
|
((u_int32_t)csio->cdb_io.cdb_bytes[5]);
|
|
}
|
|
memset(&io_info, 0, sizeof(struct IO_REQUEST_INFO));
|
|
io_info.ldStartBlock = ((u_int64_t)start_lba_hi << 32) | start_lba_lo;
|
|
io_info.numBlocks = datalength;
|
|
io_info.ldTgtId = device_id;
|
|
|
|
switch (ccb_h->flags & CAM_DIR_MASK) {
|
|
case CAM_DIR_IN:
|
|
io_info.isRead = 1;
|
|
break;
|
|
case CAM_DIR_OUT:
|
|
io_info.isRead = 0;
|
|
break;
|
|
case CAM_DIR_NONE:
|
|
default:
|
|
mrsas_dprint(sc, MRSAS_TRACE, "From %s : DMA Flag is %d \n", __func__, ccb_h->flags & CAM_DIR_MASK);
|
|
break;
|
|
}
|
|
|
|
map_ptr = sc->ld_drv_map[(sc->map_id & 1)];
|
|
ld_block_size = MR_LdBlockSizeGet(device_id, map_ptr, sc);
|
|
|
|
ld = MR_TargetIdToLdGet(device_id, map_ptr);
|
|
if ((ld >= MAX_LOGICAL_DRIVES_EXT) || (!sc->fast_path_io)) {
|
|
io_request->RaidContext.regLockFlags = 0;
|
|
fp_possible = 0;
|
|
} else {
|
|
if (MR_BuildRaidContext(sc, &io_info, &io_request->RaidContext, map_ptr))
|
|
fp_possible = io_info.fpOkForIo;
|
|
}
|
|
|
|
raid = MR_LdRaidGet(ld, map_ptr);
|
|
/* Store the TM capability value in cmd */
|
|
cmd->tmCapable = raid->capability.tmCapable;
|
|
|
|
cmd->request_desc->SCSIIO.MSIxIndex =
|
|
sc->msix_vectors ? smp_processor_id() % sc->msix_vectors : 0;
|
|
|
|
|
|
if (fp_possible) {
|
|
mrsas_set_pd_lba(io_request, csio->cdb_len, &io_info, ccb, map_ptr,
|
|
start_lba_lo, ld_block_size);
|
|
io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MPI2_REQ_DESCRIPT_FLAGS_FP_IO <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
if (sc->mrsas_gen3_ctrl) {
|
|
if (io_request->RaidContext.regLockFlags == REGION_TYPE_UNUSED)
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MRSAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
io_request->RaidContext.Type = MPI2_TYPE_CUDA;
|
|
io_request->RaidContext.nseg = 0x1;
|
|
io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH;
|
|
io_request->RaidContext.regLockFlags |=
|
|
(MR_RL_FLAGS_GRANT_DESTINATION_CUDA |
|
|
MR_RL_FLAGS_SEQ_NUM_ENABLE);
|
|
}
|
|
if ((sc->load_balance_info[device_id].loadBalanceFlag) &&
|
|
(io_info.isRead)) {
|
|
io_info.devHandle =
|
|
mrsas_get_updated_dev_handle(sc,
|
|
&sc->load_balance_info[device_id], &io_info);
|
|
cmd->load_balance = MRSAS_LOAD_BALANCE_FLAG;
|
|
cmd->pd_r1_lb = io_info.pd_after_lb;
|
|
} else
|
|
cmd->load_balance = 0;
|
|
cmd->request_desc->SCSIIO.DevHandle = io_info.devHandle;
|
|
io_request->DevHandle = io_info.devHandle;
|
|
} else {
|
|
/* Not FP IO */
|
|
io_request->RaidContext.timeoutValue = map_ptr->raidMap.fpPdIoTimeoutSec;
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MRSAS_REQ_DESCRIPT_FLAGS_LD_IO <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
if (sc->mrsas_gen3_ctrl) {
|
|
if (io_request->RaidContext.regLockFlags == REGION_TYPE_UNUSED)
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MRSAS_REQ_DESCRIPT_FLAGS_NO_LOCK <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
io_request->RaidContext.Type = MPI2_TYPE_CUDA;
|
|
io_request->RaidContext.regLockFlags |=
|
|
(MR_RL_FLAGS_GRANT_DESTINATION_CPU0 |
|
|
MR_RL_FLAGS_SEQ_NUM_ENABLE);
|
|
io_request->RaidContext.nseg = 0x1;
|
|
}
|
|
io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST;
|
|
io_request->DevHandle = device_id;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_build_ldio_nonrw: Builds an LDIO command
|
|
* input: Adapter instance soft state
|
|
* Pointer to command packet
|
|
* Pointer to CCB
|
|
*
|
|
* This function builds the LDIO command packet. It returns 0 if the command is
|
|
* built successfully, otherwise it returns a 1.
|
|
*/
|
|
int
|
|
mrsas_build_ldio_nonrw(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb)
|
|
{
|
|
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
|
|
u_int32_t device_id, ld;
|
|
MR_DRV_RAID_MAP_ALL *map_ptr;
|
|
MR_LD_RAID *raid;
|
|
MRSAS_RAID_SCSI_IO_REQUEST *io_request;
|
|
|
|
io_request = cmd->io_request;
|
|
device_id = ccb_h->target_id;
|
|
|
|
map_ptr = sc->ld_drv_map[(sc->map_id & 1)];
|
|
ld = MR_TargetIdToLdGet(device_id, map_ptr);
|
|
raid = MR_LdRaidGet(ld, map_ptr);
|
|
/* Store the TM capability value in cmd */
|
|
cmd->tmCapable = raid->capability.tmCapable;
|
|
|
|
/* FW path for LD Non-RW (SCSI management commands) */
|
|
io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST;
|
|
io_request->DevHandle = device_id;
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
|
|
io_request->RaidContext.VirtualDiskTgtId = device_id;
|
|
io_request->LUN[1] = ccb_h->target_lun & 0xF;
|
|
io_request->DataLength = cmd->length;
|
|
|
|
if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) {
|
|
if (cmd->sge_count > sc->max_num_sge) {
|
|
device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds"
|
|
"max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge);
|
|
return (1);
|
|
}
|
|
/*
|
|
* numSGE store lower 8 bit of sge_count. numSGEExt store
|
|
* higher 8 bit of sge_count
|
|
*/
|
|
io_request->RaidContext.numSGE = cmd->sge_count;
|
|
io_request->RaidContext.numSGEExt = (uint8_t)(cmd->sge_count >> 8);
|
|
} else {
|
|
device_printf(sc->mrsas_dev, "Data map/load failed.\n");
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_build_syspdio: Builds an DCDB command
|
|
* input: Adapter instance soft state
|
|
* Pointer to command packet
|
|
* Pointer to CCB
|
|
*
|
|
* This function builds the DCDB inquiry command. It returns 0 if the command
|
|
* is built successfully, otherwise it returns a 1.
|
|
*/
|
|
int
|
|
mrsas_build_syspdio(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd,
|
|
union ccb *ccb, struct cam_sim *sim, u_int8_t fp_possible)
|
|
{
|
|
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
|
|
u_int32_t device_id;
|
|
MR_DRV_RAID_MAP_ALL *local_map_ptr;
|
|
MRSAS_RAID_SCSI_IO_REQUEST *io_request;
|
|
struct MR_PD_CFG_SEQ_NUM_SYNC *pd_sync;
|
|
|
|
io_request = cmd->io_request;
|
|
device_id = ccb_h->target_id;
|
|
local_map_ptr = sc->ld_drv_map[(sc->map_id & 1)];
|
|
io_request->RaidContext.RAIDFlags = MR_RAID_FLAGS_IO_SUB_TYPE_SYSTEM_PD
|
|
<< MR_RAID_CTX_RAID_FLAGS_IO_SUB_TYPE_SHIFT;
|
|
io_request->RaidContext.regLockFlags = 0;
|
|
io_request->RaidContext.regLockRowLBA = 0;
|
|
io_request->RaidContext.regLockLength = 0;
|
|
|
|
/* If FW supports PD sequence number */
|
|
if (sc->use_seqnum_jbod_fp &&
|
|
sc->pd_list[device_id].driveType == 0x00) {
|
|
//printf("Using Drv seq num\n");
|
|
pd_sync = (void *)sc->jbodmap_mem[(sc->pd_seq_map_id - 1) & 1];
|
|
cmd->tmCapable = pd_sync->seq[device_id].capability.tmCapable;
|
|
io_request->RaidContext.VirtualDiskTgtId = device_id + 255;
|
|
io_request->RaidContext.configSeqNum = pd_sync->seq[device_id].seqNum;
|
|
io_request->DevHandle = pd_sync->seq[device_id].devHandle;
|
|
io_request->RaidContext.regLockFlags |=
|
|
(MR_RL_FLAGS_SEQ_NUM_ENABLE | MR_RL_FLAGS_GRANT_DESTINATION_CUDA);
|
|
io_request->RaidContext.Type = MPI2_TYPE_CUDA;
|
|
io_request->RaidContext.nseg = 0x1;
|
|
} else if (sc->fast_path_io) {
|
|
//printf("Using LD RAID map\n");
|
|
io_request->RaidContext.VirtualDiskTgtId = device_id;
|
|
io_request->RaidContext.configSeqNum = 0;
|
|
local_map_ptr = sc->ld_drv_map[(sc->map_id & 1)];
|
|
io_request->DevHandle =
|
|
local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
|
|
} else {
|
|
//printf("Using FW PATH\n");
|
|
/* Want to send all IO via FW path */
|
|
io_request->RaidContext.VirtualDiskTgtId = device_id;
|
|
io_request->RaidContext.configSeqNum = 0;
|
|
io_request->DevHandle = 0xFFFF;
|
|
}
|
|
|
|
cmd->request_desc->SCSIIO.DevHandle = io_request->DevHandle;
|
|
cmd->request_desc->SCSIIO.MSIxIndex =
|
|
sc->msix_vectors ? smp_processor_id() % sc->msix_vectors : 0;
|
|
|
|
if (!fp_possible) {
|
|
/* system pd firmware path */
|
|
io_request->Function = MRSAS_MPI2_FUNCTION_LD_IO_REQUEST;
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MPI2_REQ_DESCRIPT_FLAGS_SCSI_IO <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
io_request->RaidContext.timeoutValue =
|
|
local_map_ptr->raidMap.fpPdIoTimeoutSec;
|
|
io_request->RaidContext.VirtualDiskTgtId = device_id;
|
|
} else {
|
|
/* system pd fast path */
|
|
io_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
|
|
io_request->RaidContext.timeoutValue = local_map_ptr->raidMap.fpPdIoTimeoutSec;
|
|
|
|
/*
|
|
* NOTE - For system pd RW cmds only IoFlags will be FAST_PATH
|
|
* Because the NON RW cmds will now go via FW Queue
|
|
* and not the Exception queue
|
|
*/
|
|
io_request->IoFlags |= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH;
|
|
|
|
cmd->request_desc->SCSIIO.RequestFlags =
|
|
(MPI2_REQ_DESCRIPT_FLAGS_FP_IO <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
}
|
|
|
|
io_request->LUN[1] = ccb_h->target_lun & 0xF;
|
|
io_request->DataLength = cmd->length;
|
|
|
|
if (mrsas_map_request(sc, cmd, ccb) == SUCCESS) {
|
|
if (cmd->sge_count > sc->max_num_sge) {
|
|
device_printf(sc->mrsas_dev, "Error: sge_count (0x%x) exceeds"
|
|
"max (0x%x) allowed\n", cmd->sge_count, sc->max_num_sge);
|
|
return (1);
|
|
}
|
|
/*
|
|
* numSGE store lower 8 bit of sge_count. numSGEExt store
|
|
* higher 8 bit of sge_count
|
|
*/
|
|
io_request->RaidContext.numSGE = cmd->sge_count;
|
|
io_request->RaidContext.numSGEExt = (uint8_t)(cmd->sge_count >> 8);
|
|
} else {
|
|
device_printf(sc->mrsas_dev, "Data map/load failed.\n");
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_map_request: Map and load data
|
|
* input: Adapter instance soft state
|
|
* Pointer to command packet
|
|
*
|
|
* For data from OS, map and load the data buffer into bus space. The SG list
|
|
* is built in the callback. If the bus dmamap load is not successful,
|
|
* cmd->error_code will contain the error code and a 1 is returned.
|
|
*/
|
|
int
|
|
mrsas_map_request(struct mrsas_softc *sc,
|
|
struct mrsas_mpt_cmd *cmd, union ccb *ccb)
|
|
{
|
|
u_int32_t retcode = 0;
|
|
struct cam_sim *sim;
|
|
|
|
sim = xpt_path_sim(cmd->ccb_ptr->ccb_h.path);
|
|
|
|
if (cmd->data != NULL) {
|
|
/* Map data buffer into bus space */
|
|
mtx_lock(&sc->io_lock);
|
|
#if (__FreeBSD_version >= 902001)
|
|
retcode = bus_dmamap_load_ccb(sc->data_tag, cmd->data_dmamap, ccb,
|
|
mrsas_data_load_cb, cmd, 0);
|
|
#else
|
|
retcode = bus_dmamap_load(sc->data_tag, cmd->data_dmamap, cmd->data,
|
|
cmd->length, mrsas_data_load_cb, cmd, BUS_DMA_NOWAIT);
|
|
#endif
|
|
mtx_unlock(&sc->io_lock);
|
|
if (retcode)
|
|
device_printf(sc->mrsas_dev, "bus_dmamap_load(): retcode = %d\n", retcode);
|
|
if (retcode == EINPROGRESS) {
|
|
device_printf(sc->mrsas_dev, "request load in progress\n");
|
|
mrsas_freeze_simq(cmd, sim);
|
|
}
|
|
}
|
|
if (cmd->error_code)
|
|
return (1);
|
|
return (retcode);
|
|
}
|
|
|
|
/*
|
|
* mrsas_unmap_request: Unmap and unload data
|
|
* input: Adapter instance soft state
|
|
* Pointer to command packet
|
|
*
|
|
* This function unmaps and unloads data from OS.
|
|
*/
|
|
void
|
|
mrsas_unmap_request(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd)
|
|
{
|
|
if (cmd->data != NULL) {
|
|
if (cmd->flags & MRSAS_DIR_IN)
|
|
bus_dmamap_sync(sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_POSTREAD);
|
|
if (cmd->flags & MRSAS_DIR_OUT)
|
|
bus_dmamap_sync(sc->data_tag, cmd->data_dmamap, BUS_DMASYNC_POSTWRITE);
|
|
mtx_lock(&sc->io_lock);
|
|
bus_dmamap_unload(sc->data_tag, cmd->data_dmamap);
|
|
mtx_unlock(&sc->io_lock);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mrsas_data_load_cb: Callback entry point
|
|
* input: Pointer to command packet as argument
|
|
* Pointer to segment
|
|
* Number of segments Error
|
|
*
|
|
* This is the callback function of the bus dma map load. It builds the SG
|
|
* list.
|
|
*/
|
|
static void
|
|
mrsas_data_load_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
|
|
{
|
|
struct mrsas_mpt_cmd *cmd = (struct mrsas_mpt_cmd *)arg;
|
|
struct mrsas_softc *sc = cmd->sc;
|
|
MRSAS_RAID_SCSI_IO_REQUEST *io_request;
|
|
pMpi25IeeeSgeChain64_t sgl_ptr;
|
|
int i = 0, sg_processed = 0;
|
|
|
|
if (error) {
|
|
cmd->error_code = error;
|
|
device_printf(sc->mrsas_dev, "mrsas_data_load_cb: error=%d\n", error);
|
|
if (error == EFBIG) {
|
|
cmd->ccb_ptr->ccb_h.status = CAM_REQ_TOO_BIG;
|
|
return;
|
|
}
|
|
}
|
|
if (cmd->flags & MRSAS_DIR_IN)
|
|
bus_dmamap_sync(cmd->sc->data_tag, cmd->data_dmamap,
|
|
BUS_DMASYNC_PREREAD);
|
|
if (cmd->flags & MRSAS_DIR_OUT)
|
|
bus_dmamap_sync(cmd->sc->data_tag, cmd->data_dmamap,
|
|
BUS_DMASYNC_PREWRITE);
|
|
if (nseg > sc->max_num_sge) {
|
|
device_printf(sc->mrsas_dev, "SGE count is too large or 0.\n");
|
|
return;
|
|
}
|
|
io_request = cmd->io_request;
|
|
sgl_ptr = (pMpi25IeeeSgeChain64_t)&io_request->SGL;
|
|
|
|
if (sc->mrsas_gen3_ctrl) {
|
|
pMpi25IeeeSgeChain64_t sgl_ptr_end = sgl_ptr;
|
|
|
|
sgl_ptr_end += sc->max_sge_in_main_msg - 1;
|
|
sgl_ptr_end->Flags = 0;
|
|
}
|
|
if (nseg != 0) {
|
|
for (i = 0; i < nseg; i++) {
|
|
sgl_ptr->Address = segs[i].ds_addr;
|
|
sgl_ptr->Length = segs[i].ds_len;
|
|
sgl_ptr->Flags = 0;
|
|
if (sc->mrsas_gen3_ctrl) {
|
|
if (i == nseg - 1)
|
|
sgl_ptr->Flags = IEEE_SGE_FLAGS_END_OF_LIST;
|
|
}
|
|
sgl_ptr++;
|
|
sg_processed = i + 1;
|
|
if ((sg_processed == (sc->max_sge_in_main_msg - 1)) &&
|
|
(nseg > sc->max_sge_in_main_msg)) {
|
|
pMpi25IeeeSgeChain64_t sg_chain;
|
|
|
|
if (sc->mrsas_gen3_ctrl) {
|
|
if ((cmd->io_request->IoFlags & MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
|
|
!= MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH)
|
|
cmd->io_request->ChainOffset = sc->chain_offset_io_request;
|
|
else
|
|
cmd->io_request->ChainOffset = 0;
|
|
} else
|
|
cmd->io_request->ChainOffset = sc->chain_offset_io_request;
|
|
sg_chain = sgl_ptr;
|
|
if (sc->mrsas_gen3_ctrl)
|
|
sg_chain->Flags = IEEE_SGE_FLAGS_CHAIN_ELEMENT;
|
|
else
|
|
sg_chain->Flags = (IEEE_SGE_FLAGS_CHAIN_ELEMENT | MPI2_IEEE_SGE_FLAGS_IOCPLBNTA_ADDR);
|
|
sg_chain->Length = (sizeof(MPI2_SGE_IO_UNION) * (nseg - sg_processed));
|
|
sg_chain->Address = cmd->chain_frame_phys_addr;
|
|
sgl_ptr = (pMpi25IeeeSgeChain64_t)cmd->chain_frame;
|
|
}
|
|
}
|
|
}
|
|
cmd->sge_count = nseg;
|
|
}
|
|
|
|
/*
|
|
* mrsas_freeze_simq: Freeze SIM queue
|
|
* input: Pointer to command packet
|
|
* Pointer to SIM
|
|
*
|
|
* This function freezes the sim queue.
|
|
*/
|
|
static void
|
|
mrsas_freeze_simq(struct mrsas_mpt_cmd *cmd, struct cam_sim *sim)
|
|
{
|
|
union ccb *ccb = (union ccb *)(cmd->ccb_ptr);
|
|
|
|
xpt_freeze_simq(sim, 1);
|
|
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
|
|
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
|
|
}
|
|
|
|
void
|
|
mrsas_xpt_freeze(struct mrsas_softc *sc)
|
|
{
|
|
xpt_freeze_simq(sc->sim_0, 1);
|
|
xpt_freeze_simq(sc->sim_1, 1);
|
|
}
|
|
|
|
void
|
|
mrsas_xpt_release(struct mrsas_softc *sc)
|
|
{
|
|
xpt_release_simq(sc->sim_0, 1);
|
|
xpt_release_simq(sc->sim_1, 1);
|
|
}
|
|
|
|
/*
|
|
* mrsas_cmd_done: Perform remaining command completion
|
|
* input: Adapter instance soft state Pointer to command packet
|
|
*
|
|
* This function calls ummap request and releases the MPT command.
|
|
*/
|
|
void
|
|
mrsas_cmd_done(struct mrsas_softc *sc, struct mrsas_mpt_cmd *cmd)
|
|
{
|
|
mrsas_unmap_request(sc, cmd);
|
|
|
|
mtx_lock(&sc->sim_lock);
|
|
callout_stop(&cmd->cm_callout);
|
|
xpt_done(cmd->ccb_ptr);
|
|
cmd->ccb_ptr = NULL;
|
|
mtx_unlock(&sc->sim_lock);
|
|
mrsas_release_mpt_cmd(cmd);
|
|
}
|
|
|
|
/*
|
|
* mrsas_cam_poll: Polling entry point
|
|
* input: Pointer to SIM
|
|
*
|
|
* This is currently a stub function.
|
|
*/
|
|
static void
|
|
mrsas_cam_poll(struct cam_sim *sim)
|
|
{
|
|
int i;
|
|
struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim);
|
|
|
|
if (sc->msix_vectors != 0){
|
|
for (i=0; i<sc->msix_vectors; i++){
|
|
mrsas_complete_cmd(sc, i);
|
|
}
|
|
} else {
|
|
mrsas_complete_cmd(sc, 0);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* mrsas_bus_scan: Perform bus scan
|
|
* input: Adapter instance soft state
|
|
*
|
|
* This mrsas_bus_scan function is needed for FreeBSD 7.x. Also, it should not
|
|
* be called in FreeBSD 8.x and later versions, where the bus scan is
|
|
* automatic.
|
|
*/
|
|
int
|
|
mrsas_bus_scan(struct mrsas_softc *sc)
|
|
{
|
|
union ccb *ccb_0;
|
|
union ccb *ccb_1;
|
|
|
|
if ((ccb_0 = xpt_alloc_ccb()) == NULL) {
|
|
return (ENOMEM);
|
|
}
|
|
if ((ccb_1 = xpt_alloc_ccb()) == NULL) {
|
|
xpt_free_ccb(ccb_0);
|
|
return (ENOMEM);
|
|
}
|
|
mtx_lock(&sc->sim_lock);
|
|
if (xpt_create_path(&ccb_0->ccb_h.path, xpt_periph, cam_sim_path(sc->sim_0),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_free_ccb(ccb_0);
|
|
xpt_free_ccb(ccb_1);
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (EIO);
|
|
}
|
|
if (xpt_create_path(&ccb_1->ccb_h.path, xpt_periph, cam_sim_path(sc->sim_1),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_free_ccb(ccb_0);
|
|
xpt_free_ccb(ccb_1);
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (EIO);
|
|
}
|
|
mtx_unlock(&sc->sim_lock);
|
|
xpt_rescan(ccb_0);
|
|
xpt_rescan(ccb_1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_bus_scan_sim: Perform bus scan per SIM
|
|
* input: adapter instance soft state
|
|
*
|
|
* This function will be called from Event handler on LD creation/deletion,
|
|
* JBOD on/off.
|
|
*/
|
|
int
|
|
mrsas_bus_scan_sim(struct mrsas_softc *sc, struct cam_sim *sim)
|
|
{
|
|
union ccb *ccb;
|
|
|
|
if ((ccb = xpt_alloc_ccb()) == NULL) {
|
|
return (ENOMEM);
|
|
}
|
|
mtx_lock(&sc->sim_lock);
|
|
if (xpt_create_path(&ccb->ccb_h.path, xpt_periph, cam_sim_path(sim),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_free_ccb(ccb);
|
|
mtx_unlock(&sc->sim_lock);
|
|
return (EIO);
|
|
}
|
|
mtx_unlock(&sc->sim_lock);
|
|
xpt_rescan(ccb);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* mrsas_track_scsiio: Track IOs for a given target in the mpt_cmd_list
|
|
* input: Adapter instance soft state
|
|
* Target ID of target
|
|
* Bus ID of the target
|
|
*
|
|
* This function checks for any pending IO in the whole mpt_cmd_list pool
|
|
* with the bus_id and target_id passed in arguments. If some IO is found
|
|
* that means target reset is not successfully completed.
|
|
*
|
|
* Returns FAIL if IOs pending to the target device, else return SUCCESS
|
|
*/
|
|
static int
|
|
mrsas_track_scsiio(struct mrsas_softc *sc, target_id_t tgt_id, u_int32_t bus_id)
|
|
{
|
|
int i;
|
|
struct mrsas_mpt_cmd *mpt_cmd = NULL;
|
|
|
|
for (i = 0 ; i < sc->max_fw_cmds; i++) {
|
|
mpt_cmd = sc->mpt_cmd_list[i];
|
|
|
|
/*
|
|
* Check if the target_id and bus_id is same as the timeout IO
|
|
*/
|
|
if (mpt_cmd->ccb_ptr) {
|
|
/* bus_id = 1 denotes a VD */
|
|
if (bus_id == 1)
|
|
tgt_id = (mpt_cmd->ccb_ptr->ccb_h.target_id - (MRSAS_MAX_PD - 1));
|
|
|
|
if (mpt_cmd->ccb_ptr->cpi.bus_id == bus_id &&
|
|
mpt_cmd->ccb_ptr->ccb_h.target_id == tgt_id) {
|
|
device_printf(sc->mrsas_dev,
|
|
"IO commands pending to target id %d\n", tgt_id);
|
|
return FAIL;
|
|
}
|
|
}
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
#if TM_DEBUG
|
|
/*
|
|
* mrsas_tm_response_code: Prints TM response code received from FW
|
|
* input: Adapter instance soft state
|
|
* MPI reply returned from firmware
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
mrsas_tm_response_code(struct mrsas_softc *sc,
|
|
MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply)
|
|
{
|
|
char *desc;
|
|
|
|
switch (mpi_reply->ResponseCode) {
|
|
case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
|
|
desc = "task management request completed";
|
|
break;
|
|
case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
|
|
desc = "invalid frame";
|
|
break;
|
|
case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
|
|
desc = "task management request not supported";
|
|
break;
|
|
case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
|
|
desc = "task management request failed";
|
|
break;
|
|
case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
|
|
desc = "task management request succeeded";
|
|
break;
|
|
case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
|
|
desc = "invalid lun";
|
|
break;
|
|
case 0xA:
|
|
desc = "overlapped tag attempted";
|
|
break;
|
|
case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
|
|
desc = "task queued, however not sent to target";
|
|
break;
|
|
default:
|
|
desc = "unknown";
|
|
break;
|
|
}
|
|
device_printf(sc->mrsas_dev, "response_code(%01x): %s\n",
|
|
mpi_reply->ResponseCode, desc);
|
|
device_printf(sc->mrsas_dev,
|
|
"TerminationCount/DevHandle/Function/TaskType/IOCStat/IOCLoginfo\n"
|
|
"0x%x/0x%x/0x%x/0x%x/0x%x/0x%x\n",
|
|
mpi_reply->TerminationCount, mpi_reply->DevHandle,
|
|
mpi_reply->Function, mpi_reply->TaskType,
|
|
mpi_reply->IOCStatus, mpi_reply->IOCLogInfo);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* mrsas_issue_tm: Fires the TM command to FW and waits for completion
|
|
* input: Adapter instance soft state
|
|
* reqest descriptor compiled by mrsas_reset_targets
|
|
*
|
|
* Returns FAIL if TM command TIMEDOUT from FW else SUCCESS.
|
|
*/
|
|
static int
|
|
mrsas_issue_tm(struct mrsas_softc *sc,
|
|
MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc)
|
|
{
|
|
int sleep_stat;
|
|
|
|
mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high);
|
|
sleep_stat = msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "tm_sleep", 50*hz);
|
|
|
|
if (sleep_stat == EWOULDBLOCK) {
|
|
device_printf(sc->mrsas_dev, "tm cmd TIMEDOUT\n");
|
|
return FAIL;
|
|
}
|
|
|
|
return SUCCESS;
|
|
}
|
|
|
|
/*
|
|
* mrsas_reset_targets : Gathers info to fire a target reset command
|
|
* input: Adapter instance soft state
|
|
*
|
|
* This function compiles data for a target reset command to be fired to the FW
|
|
* and then traverse the target_reset_pool to see targets with TIMEDOUT IOs.
|
|
*
|
|
* Returns SUCCESS or FAIL
|
|
*/
|
|
int mrsas_reset_targets(struct mrsas_softc *sc)
|
|
{
|
|
struct mrsas_mpt_cmd *tm_mpt_cmd = NULL;
|
|
struct mrsas_mpt_cmd *tgt_mpt_cmd = NULL;
|
|
MR_TASK_MANAGE_REQUEST *mr_request;
|
|
MPI2_SCSI_TASK_MANAGE_REQUEST *tm_mpi_request;
|
|
MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc;
|
|
int retCode = FAIL, count, i, outstanding;
|
|
u_int32_t MSIxIndex, bus_id;
|
|
target_id_t tgt_id;
|
|
#if TM_DEBUG
|
|
MPI2_SCSI_TASK_MANAGE_REPLY *mpi_reply;
|
|
#endif
|
|
|
|
outstanding = mrsas_atomic_read(&sc->fw_outstanding);
|
|
|
|
if (!outstanding) {
|
|
device_printf(sc->mrsas_dev, "NO IOs pending...\n");
|
|
mrsas_atomic_set(&sc->target_reset_outstanding, 0);
|
|
retCode = SUCCESS;
|
|
goto return_status;
|
|
} else if (sc->adprecovery != MRSAS_HBA_OPERATIONAL) {
|
|
device_printf(sc->mrsas_dev, "Controller is not operational\n");
|
|
goto return_status;
|
|
} else {
|
|
/* Some more error checks will be added in future */
|
|
}
|
|
|
|
/* Get an mpt frame and an index to fire the TM cmd */
|
|
tm_mpt_cmd = mrsas_get_mpt_cmd(sc);
|
|
if (!tm_mpt_cmd) {
|
|
retCode = FAIL;
|
|
goto return_status;
|
|
}
|
|
|
|
req_desc = mrsas_get_request_desc(sc, (tm_mpt_cmd->index) - 1);
|
|
if (!req_desc) {
|
|
device_printf(sc->mrsas_dev, "Cannot get request_descriptor for tm.\n");
|
|
retCode = FAIL;
|
|
goto release_mpt;
|
|
}
|
|
memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION));
|
|
|
|
req_desc->HighPriority.SMID = tm_mpt_cmd->index;
|
|
req_desc->HighPriority.RequestFlags =
|
|
(MPI2_REQ_DESCRIPT_FLAGS_HIGH_PRIORITY <<
|
|
MRSAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
|
|
req_desc->HighPriority.MSIxIndex = 0;
|
|
req_desc->HighPriority.LMID = 0;
|
|
req_desc->HighPriority.Reserved1 = 0;
|
|
tm_mpt_cmd->request_desc = req_desc;
|
|
|
|
mr_request = (MR_TASK_MANAGE_REQUEST *) tm_mpt_cmd->io_request;
|
|
memset(mr_request, 0, sizeof(MR_TASK_MANAGE_REQUEST));
|
|
|
|
tm_mpi_request = (MPI2_SCSI_TASK_MANAGE_REQUEST *) &mr_request->TmRequest;
|
|
tm_mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
|
|
tm_mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
|
|
tm_mpi_request->TaskMID = 0; /* smid task */
|
|
tm_mpi_request->LUN[1] = 0;
|
|
|
|
/* Traverse the tm_mpt pool to get valid entries */
|
|
for (i = 0 ; i < MRSAS_MAX_TM_TARGETS; i++) {
|
|
if(!sc->target_reset_pool[i]) {
|
|
continue;
|
|
} else {
|
|
tgt_mpt_cmd = sc->target_reset_pool[i];
|
|
}
|
|
|
|
tgt_id = i;
|
|
|
|
/* See if the target is tm capable or NOT */
|
|
if (!tgt_mpt_cmd->tmCapable) {
|
|
device_printf(sc->mrsas_dev, "Task management NOT SUPPORTED for "
|
|
"CAM target:%d\n", tgt_id);
|
|
|
|
retCode = FAIL;
|
|
goto release_mpt;
|
|
}
|
|
|
|
tm_mpi_request->DevHandle = tgt_mpt_cmd->io_request->DevHandle;
|
|
|
|
if (i < (MRSAS_MAX_PD - 1)) {
|
|
mr_request->uTmReqReply.tmReqFlags.isTMForPD = 1;
|
|
bus_id = 0;
|
|
} else {
|
|
mr_request->uTmReqReply.tmReqFlags.isTMForLD = 1;
|
|
bus_id = 1;
|
|
}
|
|
|
|
device_printf(sc->mrsas_dev, "TM will be fired for "
|
|
"CAM target:%d and bus_id %d\n", tgt_id, bus_id);
|
|
|
|
sc->ocr_chan = (void *)&tm_mpt_cmd;
|
|
retCode = mrsas_issue_tm(sc, req_desc);
|
|
if (retCode == FAIL)
|
|
goto release_mpt;
|
|
|
|
#if TM_DEBUG
|
|
mpi_reply =
|
|
(MPI2_SCSI_TASK_MANAGE_REPLY *) &mr_request->uTmReqReply.TMReply;
|
|
mrsas_tm_response_code(sc, mpi_reply);
|
|
#endif
|
|
mrsas_atomic_dec(&sc->target_reset_outstanding);
|
|
sc->target_reset_pool[i] = NULL;
|
|
|
|
/* Check for pending cmds in the mpt_cmd_pool with the tgt_id */
|
|
mrsas_disable_intr(sc);
|
|
/* Wait for 1 second to complete parallel ISR calling same
|
|
* mrsas_complete_cmd()
|
|
*/
|
|
msleep(&sc->ocr_chan, &sc->sim_lock, PRIBIO, "mrsas_reset_wakeup",
|
|
1 * hz);
|
|
count = sc->msix_vectors > 0 ? sc->msix_vectors : 1;
|
|
mtx_unlock(&sc->sim_lock);
|
|
for (MSIxIndex = 0; MSIxIndex < count; MSIxIndex++)
|
|
mrsas_complete_cmd(sc, MSIxIndex);
|
|
mtx_lock(&sc->sim_lock);
|
|
retCode = mrsas_track_scsiio(sc, tgt_id, bus_id);
|
|
mrsas_enable_intr(sc);
|
|
|
|
if (retCode == FAIL)
|
|
goto release_mpt;
|
|
}
|
|
|
|
device_printf(sc->mrsas_dev, "Number of targets outstanding "
|
|
"after reset: %d\n", mrsas_atomic_read(&sc->target_reset_outstanding));
|
|
|
|
release_mpt:
|
|
mrsas_release_mpt_cmd(tm_mpt_cmd);
|
|
return_status:
|
|
device_printf(sc->mrsas_dev, "target reset %s!!\n",
|
|
(retCode == SUCCESS) ? "SUCCESS" : "FAIL");
|
|
|
|
return retCode;
|
|
}
|
|
|