d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
85de9f54f8
freebsd-dev/sys/dev/le/if_le_ledma.c
Marius Strobl 85de9f54f8 o Move the MODULE_DEPEND() for cam(4) from the esp_sbus.c front-end to 
the ncr53c9x.c core where it actually belongs so future front-ends
  don't need to add it.
o Use the correct OFW property when looking for the initiator ID of the
  SBus device.
o Don't specify an alignment when creating the parent DMA tag for
  SUNW,fas; their DMA engine doesn't require an alignment constraint
  and it's no inherited by the child DMA tags anyway (which probably
  is a bug though).
o Drop the superfluous sc_maxsync and use sc_minsync instead. The
  former apparently was added due to a confusion with the maximum
  frequency used in cam(4), which basically corresponds to the
  inverse of minimum sync period.
o Merge ncr53c9x.c from NetBSD:
  1.116: NCRDMA_SETUP() should be called before NCR_SET_COUNT() and
         NCRCMD_DMA command in ncr53c9x_select().
  1.125: free allocated resources on detach.
o Static'ize ncr53c9x_action(), ncr53c9x_init() and ncr53c9x_reset()
  as these are not required outside of ncr53c9x.c.
o In ncr53c9x_attach() don't leak the device mutex in case attaching
  fails.
o Register an asynchronous notification handler so in case cam(4)
  reports a lost device we can cancel outstanding commands and
  restore the default parameters for the target in question.
o For FAS366 correctly support 16-bit target IDs and let it know
  that we use 32-bit transfers.
o Overhaul the negotiation of transfer settings. This includes
  distinguishing between current and goal transfer settings of the
  target so we can renegotiate their goal settings when necessary
  and correcting the order in which tagged, wide and synchronous
  transfers are negotiated.
o If we are requesting sense, force a renegotiation if we are
  currently using anything different from asynchronous at 8 bit
  as the target might have lost our transfer negotiations.
o In case of an XPT_RESET_BUS just directly call ncr53c9x_init()
  instead of issuing a NCRCMD_RSTSCSI, which in turn will issue an
  interrupt that is treated as an unexpected SCSI bus reset by
  ncr53c9x_intr() and thus calls ncr53c9x_init(). Remove the now
  no longer used ncr53c9x_scsi_reset().
o Correct an off-by-one error when setting cpi->max_lun.
o In replace printf(9) with device_printf(9) calls where appropriate
  and in ncr53c9x_action() remove some unnecessarily verbose messages.
o In ncr53c9x_sched() use TAILQ_FOREACH() instead of reimplementing
  it and consolidate two tagging-related target info checks into one.
o In ncr53c9x_done() set the CAM status to CAM_SCSI_STATUS_ERROR when
  appropriate, respect CAM_DIS_AUTOSENSE and teach it to return SCSI
  status information.
o In ncr53c9x_dequeue() ensure the tags are cleared.
o Use ulmin() instead of min() where appropriate.
o In ncr53c9x_msgout() consistently use the reset label.
o When we're interrupted during a data phase and the DMA engine is
  still active, don't panic but reset the core and the DMA engine as
  this should be sufficient. Also, the typical problem for triggering
  this was the lack of renegotiation when requesting sense.
o Correctly handle DEVICE RESETs.
o Adapt the locking of esp(4) to MPSAFE cam(4). This includes moving
  the calls of lsi64854_attach() to the bus front-ends so it can pass
  the esp(4) mutex to bus_dma_tag_create(9).
o Change the LSI64854 driver to not create a DMA tag and map for the
  Ethernet channel as le(4) will handle these on its own as well as
  sync and unload the DMA maps for the SCSI and parallel port channel
  after a DMA transfer.
o Cam(4)'ify some NetBSD-centric comments.
o Use bus_{read,write}_*(9) instead of bus_space_{read,write}_*(9)
  and take advantage of rman_get_rid(9) in order to save some softc
  members.

Reviewed by:	scottl
MFC after:	1 month
2008-09-08 20:20:44 +00:00

501 lines
13 KiB
C
Raw Blame History

/* $NetBSD: if_le_ledma.c,v 1.26 2005/12/11 12:23:44 christos Exp $ */
/*-
* Copyright (c) 1997, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace
* Simulation Facility, NASA Ames Research Center; Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/resource.h>
#include <sys/rman.h>
#include <sys/socket.h>
#include <dev/ofw/ofw_bus.h>
#include <machine/bus.h>
#include <machine/ofw_machdep.h>
#include <machine/resource.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_media.h>
#include <sparc64/sbus/lsi64854reg.h>
#include <sparc64/sbus/lsi64854var.h>
#include <dev/le/lancereg.h>
#include <dev/le/lancevar.h>
#include <dev/le/am7990var.h>
#define LEDMA_ALIGNMENT 8 /* ring desc. alignmet for NCR92C990 */
#define LEDMA_BOUNDARY (16*1024*1024) /* must not cross 16MB boundary */
#define LEDMA_MEMSIZE (16*1024) /* LANCE memory size */
#define LEREG1_RDP 0 /* Register Data Port */
#define LEREG1_RAP 2 /* Register Address Port */
struct le_dma_softc {
struct am7990_softc sc_am7990; /* glue to MI code */
struct resource *sc_rres;
struct resource *sc_ires;
void *sc_ih;
bus_dma_tag_t sc_dmat;
bus_dmamap_t sc_dmam;
bus_addr_t sc_laddr; /* LANCE DMA address */
struct lsi64854_softc *sc_dma; /* pointer to DMA engine */
};
static device_probe_t le_dma_probe;
static device_attach_t le_dma_attach;
static device_detach_t le_dma_detach;
static device_resume_t le_dma_resume;
static device_suspend_t le_dma_suspend;
static device_method_t le_dma_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, le_dma_probe),
DEVMETHOD(device_attach, le_dma_attach),
DEVMETHOD(device_detach, le_dma_detach),
/* We can just use the suspend method here. */
DEVMETHOD(device_shutdown, le_dma_suspend),
DEVMETHOD(device_suspend, le_dma_suspend),
DEVMETHOD(device_resume, le_dma_resume),
{ 0, 0 }
};
DEFINE_CLASS_0(le, le_dma_driver, le_dma_methods, sizeof(struct le_dma_softc));
DRIVER_MODULE(le, dma, le_dma_driver, le_devclass, 0, 0);
MODULE_DEPEND(le, dma, 1, 1, 1);
MODULE_DEPEND(le, ether, 1, 1, 1);
/*
* Media types supported
*/
static const int le_dma_supmedia[] = {
IFM_MAKEWORD(IFM_ETHER, IFM_AUTO, 0, 0),
IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0),
IFM_MAKEWORD(IFM_ETHER, IFM_10_5, 0, 0)
};
static void le_dma_wrcsr(struct lance_softc *, uint16_t, uint16_t);
static uint16_t le_dma_rdcsr(struct lance_softc *, uint16_t);
static void le_dma_setutp(struct lance_softc *);
static void le_dma_setaui(struct lance_softc *);
static int le_dma_supmediachange(struct lance_softc *);
static void le_dma_supmediastatus(struct lance_softc *, struct ifmediareq *);
static void le_dma_hwreset(struct lance_softc *);
static int le_dma_hwintr(struct lance_softc *);
static void le_dma_nocarrier(struct lance_softc *);
static bus_dmamap_callback_t le_dma_dma_callback;
static void
le_dma_wrcsr(struct lance_softc *sc, uint16_t port, uint16_t val)
{
struct le_dma_softc *lesc = (struct le_dma_softc *)sc;
bus_write_2(lesc->sc_rres, LEREG1_RAP, port);
bus_barrier(lesc->sc_rres, LEREG1_RAP, 2, BUS_SPACE_BARRIER_WRITE);
bus_write_2(lesc->sc_rres, LEREG1_RDP, val);
}
static uint16_t
le_dma_rdcsr(struct lance_softc *sc, uint16_t port)
{
struct le_dma_softc *lesc = (struct le_dma_softc *)sc;
bus_write_2(lesc->sc_rres, LEREG1_RAP, port);
bus_barrier(lesc->sc_rres, LEREG1_RAP, 2, BUS_SPACE_BARRIER_WRITE);
return (bus_read_2(lesc->sc_rres, LEREG1_RDP));
}
static void
le_dma_setutp(struct lance_softc *sc)
{
struct lsi64854_softc *dma = ((struct le_dma_softc *)sc)->sc_dma;
L64854_SCSR(dma, L64854_GCSR(dma) | E_TP_AUI);
DELAY(20000); /* We must not touch the LANCE chip for 20ms. */
}
static void
le_dma_setaui(struct lance_softc *sc)
{
struct lsi64854_softc *dma = ((struct le_dma_softc *)sc)->sc_dma;
L64854_SCSR(dma, L64854_GCSR(dma) & ~E_TP_AUI);
DELAY(20000); /* We must not touch the LANCE chip for 20ms. */
}
static int
le_dma_supmediachange(struct lance_softc *sc)
{
struct ifmedia *ifm = &sc->sc_media;
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
return (EINVAL);
/*
* Switch to the selected media. If autoselect is set, we don't
* really have to do anything. We'll switch to the other media
* when we detect loss of carrier.
*/
switch (IFM_SUBTYPE(ifm->ifm_media)) {
case IFM_10_T:
le_dma_setutp(sc);
break;
case IFM_10_5:
le_dma_setaui(sc);
break;
case IFM_AUTO:
break;
default:
return (EINVAL);
}
return (0);
}
static void
le_dma_supmediastatus(struct lance_softc *sc, struct ifmediareq *ifmr)
{
struct lsi64854_softc *dma = ((struct le_dma_softc *)sc)->sc_dma;
/*
* Notify the world which media we're currently using.
*/
if (L64854_GCSR(dma) & E_TP_AUI)
ifmr->ifm_active = IFM_MAKEWORD(IFM_ETHER, IFM_10_T, 0, 0);
else
ifmr->ifm_active = IFM_MAKEWORD(IFM_ETHER, IFM_10_5, 0, 0);
}
static void
le_dma_hwreset(struct lance_softc *sc)
{
struct le_dma_softc *lesc = (struct le_dma_softc *)sc;
struct lsi64854_softc *dma = lesc->sc_dma;
uint32_t aui_bit, csr;
/*
* Reset DMA channel.
*/
csr = L64854_GCSR(dma);
aui_bit = csr & E_TP_AUI;
DMA_RESET(dma);
/* Write bits 24-31 of Lance address. */
bus_write_4(dma->sc_res, L64854_REG_ENBAR,
lesc->sc_laddr & 0xff000000);
DMA_ENINTR(dma);
/*
* Disable E-cache invalidates on chip writes.
* Retain previous cable selection bit.
*/
csr = L64854_GCSR(dma);
csr |= (E_DSBL_WR_INVAL | aui_bit);
L64854_SCSR(dma, csr);
DELAY(20000); /* We must not touch the LANCE chip for 20ms. */
}
static int
le_dma_hwintr(struct lance_softc *sc)
{
struct le_dma_softc *lesc = (struct le_dma_softc *)sc;
struct lsi64854_softc *dma = lesc->sc_dma;
return (DMA_INTR(dma));
}
static void
le_dma_nocarrier(struct lance_softc *sc)
{
struct le_dma_softc *lesc = (struct le_dma_softc *)sc;
/*
* Check if the user has requested a certain cable type, and
* if so, honor that request.
*/
if (L64854_GCSR(lesc->sc_dma) & E_TP_AUI) {
switch (IFM_SUBTYPE(sc->sc_media.ifm_media)) {
case IFM_10_5:
case IFM_AUTO:
if_printf(sc->sc_ifp, "lost carrier on UTP port, "
"switching to AUI port\n");
le_dma_setaui(sc);
}
} else {
switch (IFM_SUBTYPE(sc->sc_media.ifm_media)) {
case IFM_10_T:
case IFM_AUTO:
if_printf(sc->sc_ifp, "lost carrier on AUI port, "
"switching to UTP port\n");
le_dma_setutp(sc);
}
}
}
static void
le_dma_dma_callback(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
{
struct le_dma_softc *lesc = (struct le_dma_softc *)xsc;
if (error != 0)
return;
KASSERT(nsegs == 1, ("%s: bad DMA segment count", __func__));
lesc->sc_laddr = segs[0].ds_addr;
}
static int
le_dma_probe(device_t dev)
{
if (strcmp(ofw_bus_get_name(dev), "le") == 0) {
device_set_desc(dev, "LANCE Ethernet");
return (BUS_PROBE_DEFAULT);
}
return (ENXIO);
}
static int
le_dma_attach(device_t dev)
{
struct le_dma_softc *lesc;
struct lsi64854_softc *dma;
struct lance_softc *sc;
int error, i;
lesc = device_get_softc(dev);
sc = &lesc->sc_am7990.lsc;
LE_LOCK_INIT(sc, device_get_nameunit(dev));
/*
* Establish link to `ledma' device.
* XXX hackery.
*/
dma = (struct lsi64854_softc *)device_get_softc(device_get_parent(dev));
lesc->sc_dma = dma;
lesc->sc_dma->sc_client = lesc;
i = 0;
lesc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
&i, RF_ACTIVE);
if (lesc->sc_rres == NULL) {
device_printf(dev, "cannot allocate registers\n");
error = ENXIO;
goto fail_mtx;
}
i = 0;
if ((lesc->sc_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ,
&i, RF_SHAREABLE | RF_ACTIVE)) == NULL) {
device_printf(dev, "cannot allocate interrupt\n");
error = ENXIO;
goto fail_rres;
}
/* Attach the DMA engine. */
error = lsi64854_attach(dma);
if (error != 0) {
device_printf(dev, "lsi64854_attach failed\n");
goto fail_ires;
}
sc->sc_memsize = LEDMA_MEMSIZE;
error = bus_dma_tag_create(
dma->sc_parent_dmat, /* parent */
LEDMA_ALIGNMENT, /* alignment */
LEDMA_BOUNDARY, /* boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
sc->sc_memsize, /* maxsize */
1, /* nsegments */
sc->sc_memsize, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&lesc->sc_dmat);
if (error != 0) {
device_printf(dev, "cannot allocate buffer DMA tag\n");
goto fail_lsi;
}
error = bus_dmamem_alloc(lesc->sc_dmat, (void **)&sc->sc_mem,
BUS_DMA_WAITOK | BUS_DMA_COHERENT, &lesc->sc_dmam);
if (error != 0) {
device_printf(dev, "cannot allocate DMA buffer memory\n");
goto fail_dtag;
}
lesc->sc_laddr = 0;
error = bus_dmamap_load(lesc->sc_dmat, lesc->sc_dmam, sc->sc_mem,
sc->sc_memsize, le_dma_dma_callback, lesc, 0);
if (error != 0 || lesc->sc_laddr == 0) {
device_printf(dev, "cannot load DMA buffer map\n");
goto fail_dmem;
}
sc->sc_addr = lesc->sc_laddr & 0xffffff;
sc->sc_flags = 0;
sc->sc_conf3 = LE_C3_BSWP | LE_C3_ACON | LE_C3_BCON;
sc->sc_mediachange = le_dma_supmediachange;
sc->sc_mediastatus = le_dma_supmediastatus;
sc->sc_supmedia = le_dma_supmedia;
sc->sc_nsupmedia = sizeof(le_dma_supmedia) / sizeof(le_dma_supmedia[0]);
sc->sc_defaultmedia = le_dma_supmedia[0];
OF_getetheraddr(dev, sc->sc_enaddr);
sc->sc_copytodesc = lance_copytobuf_contig;
sc->sc_copyfromdesc = lance_copyfrombuf_contig;
sc->sc_copytobuf = lance_copytobuf_contig;
sc->sc_copyfrombuf = lance_copyfrombuf_contig;
sc->sc_zerobuf = lance_zerobuf_contig;
sc->sc_rdcsr = le_dma_rdcsr;
sc->sc_wrcsr = le_dma_wrcsr;
sc->sc_hwreset = le_dma_hwreset;
sc->sc_hwintr = le_dma_hwintr;
sc->sc_nocarrier = le_dma_nocarrier;
error = am7990_config(&lesc->sc_am7990, device_get_name(dev),
device_get_unit(dev));
if (error != 0) {
device_printf(dev, "cannot attach Am7990\n");
goto fail_dmap;
}
error = bus_setup_intr(dev, lesc->sc_ires, INTR_TYPE_NET | INTR_MPSAFE,
NULL, am7990_intr, sc, &lesc->sc_ih);
if (error != 0) {
device_printf(dev, "cannot set up interrupt\n");
goto fail_am7990;
}
return (0);
fail_am7990:
am7990_detach(&lesc->sc_am7990);
fail_dmap:
bus_dmamap_unload(lesc->sc_dmat, lesc->sc_dmam);
fail_dmem:
bus_dmamem_free(lesc->sc_dmat, sc->sc_mem, lesc->sc_dmam);
fail_dtag:
bus_dma_tag_destroy(lesc->sc_dmat);
fail_lsi:
lsi64854_detach(dma);
fail_ires:
bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(lesc->sc_ires),
lesc->sc_ires);
fail_rres:
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(lesc->sc_rres),
lesc->sc_rres);
fail_mtx:
LE_LOCK_DESTROY(sc);
return (error);
}
static int
le_dma_detach(device_t dev)
{
struct le_dma_softc *lesc;
struct lance_softc *sc;
int error;
lesc = device_get_softc(dev);
sc = &lesc->sc_am7990.lsc;
bus_teardown_intr(dev, lesc->sc_ires, lesc->sc_ih);
am7990_detach(&lesc->sc_am7990);
bus_dmamap_unload(lesc->sc_dmat, lesc->sc_dmam);
bus_dmamem_free(lesc->sc_dmat, sc->sc_mem, lesc->sc_dmam);
bus_dma_tag_destroy(lesc->sc_dmat);
error = lsi64854_detach(lesc->sc_dma);
if (error != 0)
return (error);
bus_release_resource(dev, SYS_RES_IRQ, rman_get_rid(lesc->sc_ires),
lesc->sc_ires);
bus_release_resource(dev, SYS_RES_MEMORY, rman_get_rid(lesc->sc_rres),
lesc->sc_rres);
LE_LOCK_DESTROY(sc);
return (0);
}
static int
le_dma_suspend(device_t dev)
{
struct le_dma_softc *lesc;
lesc = device_get_softc(dev);
lance_suspend(&lesc->sc_am7990.lsc);
return (0);
}
static int
le_dma_resume(device_t dev)
{
struct le_dma_softc *lesc;
lesc = device_get_softc(dev);
lance_resume(&lesc->sc_am7990.lsc);
return (0);
}
Reference in New Issue View Git Blame Copy Permalink