freebsd-dev/sys/i386/isa/kbd.h
1995-05-30 08:16:23 +00:00

57 lines
2.2 KiB
C

/*
* Keyboard definitions
* from: unknown origin, 386BSD 0.1
* $Id: kbd.h,v 1.3 1993/11/07 17:44:33 wollman Exp $
*/
#ifndef _I386_ISA_KBD_H_
#define _I386_ISA_KBD_H_ 1
/* Reference: IBM AT Technical Reference Manual,
* pp. 1-38 to 1-43, 4-3 to 4-22
*/
/* commands sent to KBCMDP */
#define KBC_CMDREAD 0x20 /* read kbd cntrl command byte */
#define KBC_CMDWRITE 0x60 /* == LD_CMDBYTE in kd.h, write command */
#define KBC_SELFTEST 0xAA /* perform self test, returns 55 when ok */
#define KBC_IFTEST 0xAB /* perform interface test */
#define KBC_DIAGDUMP 0xAC /* send 19 status bytes to system */
#define KBC_DISKBD 0xAD /* disable keyboard */
#define KBC_ENAKBD 0xAE /* enable keyboard */
#define KBC_RDINP 0xC0 /* read input port */
#define KBC_RDID 0xC4 /* read keyboard ID */
#define KBC_RDOUTP 0xD0 /* read output port */
#define KBC_WROUTP 0xD1 /* write output port */
#define KBC_RDTINP 0xE0 /* read test inputs */
/* commands sent to KBDATAP */
#define KBC_STSIND 0xED /* set keyboard status indicators */
#define KBC_ECHO 0xEE /* reply with 0xEE */
#define KBC_SETTPM 0xF3 /* Set typematic rate/delay */
#define KBC_ENABLE 0xF4 /* Start scanning */
#define KBC_SETDEFD 0xF5 /* =KBC_SETDEF, but disable scanning */
#define KBC_SETDEF 0xF6 /* Set power on defaults */
#define KBC_RESEND 0xFE /* system wants keyboard to resend last code */
#define KBC_RESET 0xFF /* Reset the keyboard */
/* responses */
#define KBR_OVERRUN 0x00 /* Keyboard flooded */
#define KBR_STOK 0x55 /* Selftest ok response */
#define KBR_IFOK 0x00 /* Interface test ok */
#define KBR_IFCL_SA0 0x01 /* Clock Stuck-at-0 fault */
#define KBR_IFCL_SA1 0x02 /* Clock Stuck-at-1 fault */
#define KBR_IFDA_SA0 0x03 /* Data Stuck-at-0 fault */
#define KBR_IFDA_SA1 0x04 /* Data Stuck-at-1 fault */
#define KBR_RSTDONE 0xAA /* Keyboard reset (BAT) complete */
#define KBR_E0 0xE0 /* Extended prefix */
#define KBR_E1 0xE1 /* BREAK'S HIT :-( */
#define KBR_ECHO 0xEE /* Echo response */
#define KBR_F0 0xF0 /* Break code prefix */
#define KBR_ACK 0xFA /* Keyboard did receive command */
#define KBR_BATFAIL 0xFC /* BAT failed */
#define KBR_DIAGFAIL 0xFD /* Diagnostic failed response */
#define KBR_RESEND 0xFE /* Keyboard needs resend of command */
#endif /* _I386_ISA_KBD_H_ */