d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
85fee3197a
freebsd-dev/sys/i4b/layer1/itjc/i4b_itjc_pci.c
Poul-Henning Kamp 695aa14fe2 Add missing calls to mtx_init(). 
It seems counter-intuitive that all drivers have to do this.

Pointed in right direction by:	gj
2002-09-10 16:41:08 +00:00

2143 lines
49 KiB
C
Raw Blame History

/*
* Copyright (c) 2000, 2001 Sergio Prallon. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
* 4. Altered versions must be plainly marked as such, and must not be
* misrepresented as being the original software and/or documentation.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* i4b_itjc_pci.c: NetJet-S hardware driver
* ----------------------------------------
*
* $FreeBSD$
*
* last edit-date: [Thu Jan 11 11:29:38 2001]
*
*---------------------------------------------------------------------------*/
#include "opt_i4b.h"
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <machine/clock.h>
#include <machine/bus_pio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <sys/socket.h>
#include <net/if.h>
#include <machine/i4b_debug.h>
#include <machine/i4b_ioctl.h>
#include <machine/i4b_trace.h>
#include <i4b/include/i4b_global.h>
#include <i4b/include/i4b_mbuf.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/itjc/i4b_hdlc.h> /* XXXXXXXXXXXXXXXXXXXXXXXX */
#include <i4b/layer1/isic/i4b_isic.h>
#include <i4b/layer1/isic/i4b_isac.h>
#include <i4b/layer1/itjc/i4b_itjc_ext.h>
#define PCI_TJNET_VID (0xe159)
#define PCI_TJ300_DID (0x0001)
/*
* Function prototypes
*/
static int itjc_probe(device_t dev);
static int itjc_attach(device_t dev);
static void itjc_shutdown(device_t dev);
static void itjc_intr(void *xsc);
static int itjc_dma_start(struct l1_softc *sc);
static void itjc_dma_stop(struct l1_softc *sc);
static void itjc_isac_intr(struct l1_softc *sc);
static void itjc_init_linktab(struct l1_softc *sc);
static void itjc_bchannel_setup(int unit, int h_chan, int bprot,
int activate);
static void itjc_bchannel_stat(int unit, int h_chan, bchan_statistics_t *bsp);
/*
* Shorter names to bus resource manager routines.
*/
#define itjc_bus_setup(sc) \
bus_space_handle_t h = \
rman_get_bushandle((sc)->sc_resources.io_base[0]); \
bus_space_tag_t t = \
rman_get_bustag((sc)->sc_resources.io_base[0]);
#define itjc_read_1(port) (bus_space_read_1(t, h, (port)))
#define itjc_read_4(port) (bus_space_read_4(t, h, (port)))
#define itjc_write_1(port, data) (bus_space_write_1(t, h, (port), (data)))
#define itjc_write_4(port, data) (bus_space_write_4(t, h, (port), (data)))
#define itjc_read_multi_1(port, buf, size) \
(bus_space_read_multi_1(t, h, (port), (buf), (size)))
#define itjc_write_multi_1(port, buf, size) \
(bus_space_write_multi_1(t, h, (port), (buf), (size)))
/*---------------------------------------------------------------------------*
* Glue data to register ourselves as a PCI device driver.
*---------------------------------------------------------------------------*/
static device_method_t itjc_pci_methods[] =
{
/* Device interface */
DEVMETHOD(device_probe, itjc_probe),
DEVMETHOD(device_attach, itjc_attach),
DEVMETHOD(device_shutdown, itjc_shutdown),
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
{ 0, 0 }
};
static driver_t itjc_pci_driver =
{
"itjc",
itjc_pci_methods,
sizeof(struct l1_softc)
};
static devclass_t itjc_pci_devclass;
DRIVER_MODULE(netjet, pci, itjc_pci_driver, itjc_pci_devclass, 0, 0);
/*
* Jump table for multiplex routines.
*/
struct i4b_l1mux_func itjc_l1mux_func =
{
itjc_ret_linktab,
itjc_set_linktab,
itjc_mph_command_req,
itjc_ph_data_req,
itjc_ph_activate_req,
};
struct l1_softc *itjc_scp[ITJC_MAXUNIT];
/*---------------------------------------------------------------------------*
* Tiger300/320 PCI ASIC registers.
*---------------------------------------------------------------------------*/
/*
* Register offsets from i/o base.
*/
enum tiger_regs
{
TIGER_RESET_PIB_CL_TIME = 0x00,
TIGER_DMA_OPER = 0x01,
TIGER_AUX_PORT_CNTL = 0x02,
TIGER_AUX_PORT_DATA = 0x03,
TIGER_INT0_MASK = 0x04,
TIGER_INT1_MASK = 0x05,
TIGER_INT0_STATUS = 0x06,
TIGER_INT1_STATUS = 0x07,
TIGER_DMA_WR_START_ADDR = 0x08,
TIGER_DMA_WR_INT_ADDR = 0x0C,
TIGER_DMA_WR_END_ADDR = 0x10,
TIGER_DMA_WR_CURR_ADDR = 0x14,
TIGER_DMA_RD_START_ADDR = 0x18,
TIGER_DMA_RD_INT_ADDR = 0x1C,
TIGER_DMA_RD_END_ADDR = 0x20,
TIGER_DMA_RD_CURR_ADDR = 0x24,
TIGER_PULSE_COUNTER = 0x28,
};
/*
* Bits on the above registers.
*/
enum tiger_reg_bits
{
/* Reset and PIB Cycle Timing */
TIGER_DMA_OP_MODE_MASK = 0x80,
TIGER_SELF_ADDR_DMA = 0x00, /* Wrap around ending addr */
TIGER_NORMAL_DMA = 0x80, /* Stop at ending addr */
TIGER_DMA_INT_MODE_MASK = 0x40,
TIGER_DONT_LATCH_DMA_INT= 0x00, /* Bits on int0 status will be
set only while curr addr
equals int or end addr */
TIGER_LATCH_DMA_INT = 0x40, /* Bits on int0 status remain
set until cleared by CPU */
TIGER_PIB_CYCLE_TIMING_MASK = 0x30,
TIGER_PIB_3_CYCLES = 0x00,
TIGER_PIB_5_CYCLES = 0x01,
TIGER_PIB_12_CYCLES = 0x10,
TIGER_RESET_MASK = 0x0F,
TIGER_RESET_PULSE_COUNT = 0x08,
TIGER_RESET_SERIAL_PORT = 0x04,
TIGER_RESET_DMA_LOGIC = 0x02,
TIGER_RESET_EXTERNAL = 0x01,
TIGER_RESET_ALL = 0x0F,
/* DMA Operation */
TIGER_DMA_RESTART_MASK = 0x02,
TIGER_HOLD_DMA = 0x00,
TIGER_RESTART_DMA = 0x00,
TIGER_DMA_ENABLE_MASK = 0x01,
TIGER_ENABLE_DMA = 0x01,
TIGER_DISABLE_DMA = 0x00,
/* AUX Port Control & Data plus Interrupt 1 Mask & Status */
TIGER_AUX_7_MASK = 0x80,
TIGER_AUX_6_MASK = 0x40,
TIGER_AUX_5_MASK = 0x20,
TIGER_AUX_4_MASK = 0x10,
TIGER_ISAC_INT_MASK = 0x10,
TIGER_AUX_3_MASK = 0x08,
TIGER_AUX_2_MASK = 0x04,
TIGER_AUX_1_MASK = 0x02,
TIGER_AUX_0_MASK = 0x01,
/* AUX Port Control */
TIGER_AUX_7_IS_INPUT = 0x00,
TIGER_AUX_7_IS_OUTPUT = 0x80,
TIGER_AUX_6_IS_INPUT = 0x00,
TIGER_AUX_6_IS_OUTPUT = 0x40,
TIGER_AUX_5_IS_INPUT = 0x00,
TIGER_AUX_5_IS_OUTPUT = 0x20,
TIGER_AUX_4_IS_INPUT = 0x00,
TIGER_AUX_4_IS_OUTPUT = 0x10,
TIGER_AUX_3_IS_INPUT = 0x00,
TIGER_AUX_3_IS_OUTPUT = 0x80,
TIGER_AUX_2_IS_INPUT = 0x00,
TIGER_AUX_2_IS_OUTPUT = 0x40,
TIGER_AUX_1_IS_INPUT = 0x00,
TIGER_AUX_1_IS_OUTPUT = 0x20,
TIGER_AUX_0_IS_INPUT = 0x00,
TIGER_AUX_0_IS_OUTPUT = 0x10,
TIGER_AUX_NJ_DEFAULT = 0xEF, /* All but ISAC int is output */
/* Interrupt 0 Mask & Status */
TIGER_PCI_TARGET_ABORT_INT_MASK = 0x20,
TIGER_NO_TGT_ABORT_INT = 0x00,
TIGER_TARGET_ABORT_INT = 0x20,
TIGER_PCI_MASTER_ABORT_INT_MASK = 0x10,
TIGER_NO_MST_ABORT_INT = 0x00,
TIGER_MASTER_ABORT_INT = 0x10,
TIGER_DMA_RD_END_INT_MASK = 0x08,
TIGER_NO_RD_END_INT = 0x00,
TIGER_RD_END_INT = 0x08,
TIGER_DMA_RD_INT_INT_MASK = 0x04,
TIGER_NO_RD_INT_INT = 0x00,
TIGER_RD_INT_INT = 0x04,
TIGER_DMA_WR_END_INT_MASK = 0x02,
TIGER_NO_WR_END_INT = 0x00,
TIGER_WR_END_INT = 0x02,
TIGER_DMA_WR_INT_INT_MASK = 0x01,
TIGER_NO_WR_INT_INT = 0x00,
TIGER_WR_INT_INT = 0x01,
/* Interrupt 1 Mask & Status */
TIGER_NO_AUX_7_INT = 0x00,
TIGER_AUX_7_INT = 0x80,
TIGER_NO_AUX_6_INT = 0x00,
TIGER_AUX_6_INT = 0x40,
TIGER_NO_AUX_5_INT = 0x00,
TIGER_AUX_5_INT = 0x20,
TIGER_NO_AUX_4_INT = 0x00,
TIGER_AUX_4_INT = 0x10,
TIGER_NO_ISAC_INT = 0x00,
TIGER_ISAC_INT = 0x10,
TIGER_NO_AUX_3_INT = 0x00,
TIGER_AUX_3_INT = 0x08,
TIGER_NO_AUX_2_INT = 0x00,
TIGER_AUX_2_INT = 0x04,
TIGER_NO_AUX_1_INT = 0x00,
TIGER_AUX_1_INT = 0x02,
TIGER_NO_AUX_0_INT = 0x00,
TIGER_AUX_0_INT = 0x01
};
/*
* Peripheral Interface Bus definitions. This is an ISA like bus
* created by the Tiger ASIC to keep ISA chips like the ISAC happy
* on a PCI environment.
*
* Since the PIB only supplies 4 addressing lines, the 2 higher bits
* (A4 & A5) of the ISAC register addresses are wired on the 2 lower
* AUX lines. Another restriction is that all I/O to the PIB (8bit
* wide) is mapped on the PCI side as 32bit data. So the PCI address
* of a given ISAC register has to be multiplied by 4 before being
* added to the PIB base offset.
*/
enum tiger_pib_regs_defs
{
/* Offset from the I/O base to the ISAC registers. */
PIB_OFFSET = 0xC0,
PIB_LO_ADDR_MASK = 0x0F,
PIB_HI_ADDR_MASK = 0x30,
PIB_LO_ADDR_SHIFT = 2, /* Align on dword boundary */
PIB_HI_ADDR_SHIFT = 4 /* Right shift to AUX_1 & AUX_0 */
};
#define itjc_set_pib_addr_msb(a) \
( \
itjc_write_1(TIGER_AUX_PORT_DATA, \
((a) & PIB_HI_ADDR_MASK) >> PIB_HI_ADDR_SHIFT) \
)
#define itjc_pib_2_pci(a) \
( \
(((a) & PIB_LO_ADDR_MASK) << PIB_LO_ADDR_SHIFT) + PIB_OFFSET \
)
#define itjc_get_dma_offset(ctx,reg) \
( \
(u_int16_t)((bus_addr_t)itjc_read_4((reg)) - (ctx)->bus_addr) \
)
/*
* IOM-2 serial channel 0 DMA data ring buffers.
*
* The Tiger300/320 ASIC do not nothing more than transfer via DMA the
* first 32 bits of every IOM-2 frame on the serial interface to the
* ISAC. So we have no framing/deframing facilities like we would have
* with an HSCX, having to do the job with CPU cycles. On the plus side
* we are able to specify large rings which can limit the occurrence of
* over/underruns.
*/
enum
{
ITJC_RING_SLOT_WORDS = 64,
ITJC_RING_WORDS = 3 * ITJC_RING_SLOT_WORDS,
ITJC_RING_SLOT_BYTES = 4 * ITJC_RING_SLOT_WORDS,
ITJC_RING_BYTES = 4 * ITJC_RING_WORDS,
ITJC_DMA_POOL_WORDS = 2 * ITJC_RING_WORDS,
ITJC_DMA_POOL_BYTES = 4 * ITJC_DMA_POOL_WORDS
};
#define itjc_ring_add(x, d) (((x) + 4 * (d)) % ITJC_RING_BYTES)
#define itjc_ring_sub(x, d) (((x) + ITJC_RING_BYTES - 4 * (d)) \
% ITJC_RING_BYTES)
enum
{
TIGER_CH_A = 0,
TIGER_CH_B = 1,
HSCX_CH_A = 0, /* For compatibility reasons. */
HSCX_CH_B = 1,
};
enum
{
ITJC_TEL_SILENCE_BYTE = 0x00,
ITJC_HDLC_FLAG_BYTE = 0x7E,
ITJC_HDLC_ABORT_BYTE = 0xFF
};
/*
* Hardware DMA control block (one per card).
*/
typedef enum
{
ITJC_DS_LOAD_FAILED = -1,
ITJC_DS_FREE = 0,
ITJC_DS_LOADING,
ITJC_DS_STOPPED,
ITJC_DS_RUNNING
}
dma_state_t;
typedef struct
{
dma_state_t state;
u_int8_t *pool;
bus_addr_t bus_addr;
bus_dma_tag_t tag;
bus_dmamap_t map;
int error;
}
dma_context_t;
dma_context_t
dma_context [ ITJC_MAXUNIT ];
/*
* B-channel DMA control blocks (4 per card -- 1 RX & 1 TX per channel).
*/
typedef enum
{
ITJC_RS_IDLE = 0,
ITJC_RS_ACTIVE
}
dma_rx_state_t;
typedef enum
{
ITJC_TS_IDLE = 0,
ITJC_TS_ACTIVE,
ITJC_TS_AFTER_XDU
}
dma_tx_state_t;
typedef struct
{
u_int8_t *ring;
bus_addr_t bus_addr;
u_int16_t next_read;
u_int16_t hdlc_len;
u_int16_t hdlc_tmp;
u_int16_t hdlc_crc;
u_int16_t hdlc_ib;
u_int8_t hdlc_blevel;
u_int8_t hdlc_flag;
dma_rx_state_t state;
}
dma_rx_context_t;
typedef struct
{
u_int8_t *ring;
bus_addr_t bus_addr;
u_int16_t next_write;
u_int32_t hdlc_tmp;
u_int16_t hdlc_blevel;
u_int16_t hdlc_crc;
u_int16_t hdlc_ib;
u_int16_t next_frame;
u_int16_t filled;
u_int8_t hdlc_flag;
dma_tx_state_t state;
}
dma_tx_context_t;
dma_rx_context_t
dma_rx_context [ ITJC_MAXUNIT ] [ 2 ];
dma_tx_context_t
dma_tx_context [ ITJC_MAXUNIT ] [ 2 ];
/*
* Used by the mbuf handling functions.
*/
typedef enum
{
ITJC_MB_CURR = 0,
ITJC_MB_NEXT = 1,
ITJC_MB_NEW = 2
}
which_mb_t;
/*---------------------------------------------------------------------------*
* itjc_map_callback - get DMA bus address from resource mgr.
*---------------------------------------------------------------------------*/
static void
itjc_map_callback(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
dma_context_t *ctx = (dma_context_t *)arg;
if (error)
{
ctx->error = error;
ctx->state = ITJC_DS_LOAD_FAILED;
return;
}
ctx->bus_addr = segs->ds_addr;
ctx->state = ITJC_DS_STOPPED;
}
/*---------------------------------------------------------------------------*
* itjc_dma_start - Complete DMA setup & start the Tiger DMA engine.
*---------------------------------------------------------------------------*/
static int
itjc_dma_start(struct l1_softc *sc)
{
int unit = sc->sc_unit;
dma_context_t *ctx = &dma_context[unit];
dma_rx_context_t *rxc = &dma_rx_context[unit][0];
dma_tx_context_t *txc = &dma_tx_context[unit][0];
bus_addr_t ba;
u_int8_t i;
u_int32_t *pool_end,
*ip;
itjc_bus_setup(sc);
/* See if it is already running. */
if (ctx->state == ITJC_DS_RUNNING)
return 0;
if (ctx->state == ITJC_DS_LOAD_FAILED)
{
NDBGL1(L1_ERROR, "itjc%d: dma_start: DMA map loading "
"failed (error=%d).\n", unit, ctx->error);
return 1;
}
if (ctx->state != ITJC_DS_STOPPED)
{
NDBGL1(L1_ERROR, "itjc%d: dma_start: Unexpected DMA "
"state (%d).\n", unit, ctx->state);
return 1;
}
/*
* Initialize the DMA control structures (hardware & B-channel).
*/
ba = ctx->bus_addr;
txc->ring = ctx->pool + TIGER_CH_A;
rxc->ring = ctx->pool + TIGER_CH_A + ITJC_RING_BYTES;
txc->bus_addr = ba;
rxc->bus_addr = ba + ITJC_RING_BYTES;
++rxc; ++txc;
txc->ring = ctx->pool + TIGER_CH_B;
rxc->ring = ctx->pool + TIGER_CH_B + ITJC_RING_BYTES;
txc->bus_addr = ba;
rxc->bus_addr = ba + ITJC_RING_BYTES;
/*
* Fill the DMA ring buffers with IOM-2 channel 0 frames made of
* idle/abort sequences for the B & D channels and NOP for IOM-2
* cmd/ind, monitor handshake & data.
*/
pool_end = (u_int32_t *)ctx->pool + ITJC_DMA_POOL_WORDS;
for (ip = (u_int32_t *)ctx->pool; ip < pool_end; ++ip)
*ip = 0xFFFFFFFF;
/*
* Program the Tiger DMA gears.
*/
itjc_write_4(TIGER_DMA_WR_START_ADDR, ba);
itjc_write_4(TIGER_DMA_WR_INT_ADDR, ba + ITJC_RING_SLOT_BYTES - 4);
itjc_write_4(TIGER_DMA_WR_END_ADDR, ba + ITJC_RING_BYTES - 4);
ba += ITJC_RING_BYTES;
itjc_write_4(TIGER_DMA_RD_START_ADDR, ba);
itjc_write_4(TIGER_DMA_RD_INT_ADDR, ba + ITJC_RING_SLOT_BYTES * 2 - 4);
itjc_write_4(TIGER_DMA_RD_END_ADDR, ba + ITJC_RING_BYTES - 4);
itjc_write_1(TIGER_INT0_MASK,
TIGER_WR_END_INT | TIGER_WR_INT_INT | TIGER_RD_INT_INT);
itjc_write_1(TIGER_DMA_OPER, TIGER_ENABLE_DMA);
/*
* See if it really started.
*/
ba = itjc_read_4(TIGER_DMA_RD_CURR_ADDR);
for (i = 0; i < 10; ++i)
{
DELAY(SEC_DELAY/1000);
if (ba != itjc_read_4(TIGER_DMA_RD_CURR_ADDR))
{
ctx->state = ITJC_DS_RUNNING;
return 0;
}
}
NDBGL1(L1_ERROR, "itjc%d: dma_start: DMA start failed.\n ", unit);
return 1;
}
/*---------------------------------------------------------------------------*
* itjc_dma_stop - Stop the Tiger DMA engine.
*---------------------------------------------------------------------------*/
void
itjc_dma_stop(struct l1_softc *sc)
{
dma_context_t *ctx = &dma_context[sc->sc_unit];
itjc_bus_setup(sc);
/* Only stop the DMA if it is running. */
if (ctx->state != ITJC_DS_RUNNING)
return;
itjc_write_1(TIGER_DMA_OPER, TIGER_DISABLE_DMA);
DELAY(SEC_DELAY/1000);
ctx->state = ITJC_DS_STOPPED;
}
/*---------------------------------------------------------------------------*
* itjc_bchannel_dma_setup - The DMA side of itjc_bchannel_setup.
*---------------------------------------------------------------------------*/
static void
itjc_bchannel_dma_setup(struct l1_softc *sc, int h_chan, int activate)
{
dma_rx_context_t *rxc = &dma_rx_context[sc->sc_unit][h_chan];
dma_tx_context_t *txc = &dma_tx_context[sc->sc_unit][h_chan];
l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
u_int8_t fill_byte,
*ring_end,
*cp;
int s = SPLI4B();
itjc_bus_setup(sc);
if (activate)
{
/*
* Get the DMA engine going if it's not running already.
*/
itjc_dma_start(sc);
rxc->hdlc_len = rxc->hdlc_tmp = rxc->hdlc_crc = 0;
rxc->hdlc_ib = rxc->hdlc_blevel = rxc->hdlc_flag = 0;
txc->hdlc_tmp = txc->hdlc_blevel = txc->hdlc_crc = 0;
txc->hdlc_ib = 0;
txc->hdlc_flag = 2;
txc->filled = 0;
if (chan->bprot == BPROT_NONE)
fill_byte = ITJC_TEL_SILENCE_BYTE;
else
fill_byte = ITJC_HDLC_ABORT_BYTE;
ring_end = rxc->ring + ITJC_RING_BYTES;
for (cp = rxc->ring; cp < ring_end; cp += 4)
*cp = fill_byte;
ring_end = txc->ring + ITJC_RING_BYTES;
for (cp = txc->ring; cp < ring_end; cp += 4)
*cp = fill_byte;
rxc->next_read =
itjc_get_dma_offset(rxc, TIGER_DMA_RD_CURR_ADDR);
txc->next_frame = txc->next_write =
itjc_get_dma_offset(txc, TIGER_DMA_WR_CURR_ADDR);
rxc->state = ITJC_RS_ACTIVE;
txc->state = ITJC_TS_AFTER_XDU;
}
else
{
dma_rx_context_t *rxc2;
txc->state = ITJC_TS_IDLE;
rxc->state = ITJC_RS_IDLE;
rxc2 = &dma_rx_context[sc->sc_unit][0];
if (rxc2->state == ITJC_RS_IDLE
&& rxc2[1].state == ITJC_RS_IDLE)
itjc_dma_stop(sc);
}
splx(s);
}
/*---------------------------------------------------------------------------*
* Mbuf & if_queues management routines.
*---------------------------------------------------------------------------*/
static u_int8_t *
itjc_get_rx_mbuf(l1_bchan_state_t *chan, u_int8_t **dst_end_p,
which_mb_t which)
{
struct mbuf *mbuf = chan->in_mbuf;
if (mbuf == NULL && which == ITJC_MB_NEW)
{
if ((mbuf = i4b_Bgetmbuf(BCH_MAX_DATALEN)) == NULL)
panic("itjc_get_rx_mbuf: cannot allocate mbuf!");
chan->in_mbuf = mbuf;
chan->in_cbptr = (u_int8_t *)mbuf->m_data;
chan->in_len = 0;
}
if (dst_end_p != NULL)
{
if (mbuf != NULL)
*dst_end_p = (u_int8_t *)(mbuf->m_data)
+ BCH_MAX_DATALEN;
else
*dst_end_p = NULL;
}
return chan->in_cbptr;
}
static void
itjc_save_rx_mbuf(l1_bchan_state_t *chan, u_int8_t * dst)
{
struct mbuf *mbuf = chan->in_mbuf;
if (dst != NULL && mbuf != NULL)
{
chan->in_cbptr = dst;
chan->in_len = dst - (u_int8_t *)mbuf->m_data;
}
else if (dst == NULL && mbuf == NULL)
{
chan->in_cbptr = NULL;
chan->in_len = 0;
}
else
panic("itjc_save_rx_mbuf: stale pointer dst=%p mbuf=%p "
"in_cbptr=%p in_len=%d", dst, mbuf,
chan->in_cbptr, chan->in_len);
}
static void
itjc_free_rx_mbuf(l1_bchan_state_t *chan)
{
struct mbuf *mbuf = chan->in_mbuf;
if (mbuf != NULL)
i4b_Bfreembuf(mbuf);
chan->in_mbuf = NULL;
chan->in_cbptr = NULL;
chan->in_len = 0;
}
static void
itjc_put_rx_mbuf(struct l1_softc *sc, l1_bchan_state_t *chan, u_int16_t len)
{
i4b_trace_hdr_t hdr;
struct mbuf *mbuf = chan->in_mbuf;
u_int8_t *data = mbuf->m_data;
int activity = 1;
mbuf->m_pkthdr.len = mbuf->m_len = len;
if (sc->sc_trace & TRACE_B_RX)
{
hdr.unit = L0ITJCUNIT(sc->sc_unit);
hdr.type = (chan->channel == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
hdr.dir = FROM_NT;
hdr.count = ++sc->sc_trace_bcount;
MICROTIME(hdr.time);
i4b_l1_trace_ind(&hdr, len, data);
}
if (chan->bprot == BPROT_NONE)
{
activity = ! i4b_l1_bchan_tel_silence(data, len);
/* move rx'd data to rx queue */
if (! _IF_QFULL(&chan->rx_queue))
{
IF_ENQUEUE(&chan->rx_queue, mbuf);
}
else
{
i4b_Bfreembuf(mbuf);
len = 0;
}
}
if (len != 0)
{
chan->rxcount += len;
(*chan->isic_drvr_linktab->bch_rx_data_ready)
(chan->isic_drvr_linktab->unit);
}
if (activity)
(*chan->isic_drvr_linktab->bch_activity)
(chan->isic_drvr_linktab->unit, ACT_RX);
chan->in_mbuf = NULL;
chan->in_cbptr = NULL;
chan->in_len = 0;
}
#define itjc_free_tx_mbufs(chan) \
{ \
i4b_Bfreembuf((chan)->out_mbuf_head); \
(chan)->out_mbuf_cur = (chan)->out_mbuf_head = NULL; \
(chan)->out_mbuf_cur_ptr = NULL; \
(chan)->out_mbuf_cur_len = 0; \
}
static u_int16_t
itjc_get_tx_mbuf(struct l1_softc *sc, l1_bchan_state_t *chan,
u_int8_t **src_p, which_mb_t which)
{
i4b_trace_hdr_t hdr;
struct mbuf *mbuf = chan->out_mbuf_cur;
u_int8_t activity = 1;
u_int16_t len;
void *data;
switch (which)
{
case ITJC_MB_CURR:
if (mbuf != NULL)
{
*src_p = chan->out_mbuf_cur_ptr;
return chan->out_mbuf_cur_len;
}
break;
case ITJC_MB_NEXT:
if (mbuf != NULL)
{
chan->txcount += mbuf->m_len;
mbuf = mbuf->m_next;
if (mbuf != NULL)
goto new_mbuf;
}
chan->out_mbuf_cur_ptr = *src_p = NULL;
chan->out_mbuf_cur_len = 0;
if (chan->out_mbuf_head != NULL)
{
i4b_Bfreembuf(chan->out_mbuf_head);
chan->out_mbuf_head = NULL;
}
return 0;
case ITJC_MB_NEW:
if (mbuf != NULL)
chan->txcount += mbuf->m_len;
}
if (chan->out_mbuf_head != NULL)
i4b_Bfreembuf(chan->out_mbuf_head);
IF_DEQUEUE(&chan->tx_queue, mbuf);
if (mbuf == NULL)
{
chan->out_mbuf_cur = chan->out_mbuf_head = NULL;
chan->out_mbuf_cur_ptr = *src_p = NULL;
chan->out_mbuf_cur_len = 0;
chan->state &= ~(HSCX_TX_ACTIVE);
(*chan->isic_drvr_linktab->bch_tx_queue_empty)
(chan->isic_drvr_linktab->unit);
return 0;
}
chan->out_mbuf_head = mbuf;
new_mbuf:
chan->out_mbuf_cur = mbuf;
chan->out_mbuf_cur_ptr = data = mbuf->m_data;
chan->out_mbuf_cur_len = len = mbuf->m_len;
chan->state |= HSCX_TX_ACTIVE;
if (sc->sc_trace & TRACE_B_TX)
{
hdr.unit = L0ITJCUNIT(sc->sc_unit);
hdr.type = (chan->channel == HSCX_CH_A ? TRC_CH_B1 : TRC_CH_B2);
hdr.dir = FROM_TE;
hdr.count = ++sc->sc_trace_bcount;
MICROTIME(hdr.time);
i4b_l1_trace_ind(&hdr, len, data);
}
if (chan->bprot == BPROT_NONE)
activity = ! i4b_l1_bchan_tel_silence(data, len);
if (activity)
(*chan->isic_drvr_linktab->bch_activity)
(chan->isic_drvr_linktab->unit, ACT_TX);
*src_p = data;
return len;
}
#define itjc_save_tx_mbuf(chan, src, dst) \
( \
(chan)->out_mbuf_cur != NULL ? \
( \
(chan)->out_mbuf_cur_ptr = (src), \
(chan)->out_mbuf_cur_len = (len) \
) \
: \
0 \
)
/*---------------------------------------------------------------------------*
* B-channel interrupt service routines.
*---------------------------------------------------------------------------*/
/*
* Since the Tiger ASIC doesn't produce a XMIT underflow indication,
* we need to deduce it ourselves. This is somewhat tricky because we
* are dealing with modulo m arithmetic. The idea here is to have a
* "XDU zone" ahead of the writing pointer sized 1/3 of total ring
* length (a ring slot). If the hardware DMA pointer is found there we
* consider that a XDU has occurred. To complete the scheme, we never
* let the ring have more than 2 slots of (unsent) data and adjust the
* interrupt registers to cause an interrupt at every slot.
*/
static u_int8_t
itjc_xdu(struct l1_softc *sc, l1_bchan_state_t *chan, dma_tx_context_t *ctx,
u_int16_t *dst_p, u_int16_t *dst_end_p, u_int8_t tx_restart)
{
u_int8_t xdu;
u_int16_t dst_end,
dst,
dma,
dma_l,
dma_h,
xdu_l,
xdu_h;
itjc_bus_setup(sc);
/*
* Since the hardware is running, be conservative and assume
* the pointer location has a `fuzy' error factor.
*/
dma = itjc_get_dma_offset(ctx, TIGER_DMA_WR_CURR_ADDR);
dma_l = dma;
dma_h = itjc_ring_add(dma, 1);
dst_end = itjc_ring_sub(dma_l, ITJC_RING_SLOT_WORDS);
if (ctx->state != ITJC_TS_ACTIVE)
{
xdu = (ctx->state == ITJC_TS_AFTER_XDU);
dst = itjc_ring_add(dma_h, 4);
goto done;
}
/*
* Check for xmit underruns.
*/
xdu_l = dst = ctx->next_write;
xdu_h = itjc_ring_add(dst, ITJC_RING_SLOT_WORDS);
if (xdu_l < xdu_h)
xdu = (xdu_l <= dma_l && dma_l < xdu_h)
|| (xdu_l <= dma_h && dma_h < xdu_h);
else
xdu = (xdu_l <= dma_l || dma_l < xdu_h)
|| (xdu_l <= dma_h || dma_h < xdu_h);
if (xdu)
{
ctx->state = ITJC_TS_AFTER_XDU;
dst = itjc_ring_add(dma_h, 4);
}
else if (tx_restart)
{
/*
* See if we still can restart from immediately
* after the last frame sent. It's a XDU test but
* using the real data end on the comparsions. We
* don't consider XDU an error here because we were
* just trying to avoid send a filling gap between
* frames. If it's already sent no harm is done.
*/
xdu_l = dst = ctx->next_frame;
xdu_h = itjc_ring_add(dst, ITJC_RING_SLOT_WORDS);
if (xdu_l < xdu_h)
xdu = (xdu_l <= dma_l && dma_l < xdu_h)
|| (xdu_l <= dma_h && dma_h < xdu_h);
else
xdu = (xdu_l <= dma_l || dma_l < xdu_h)
|| (xdu_l <= dma_h || dma_h < xdu_h);
if (xdu)
dst = itjc_ring_add(dma_h, 4);
xdu = 0;
}
done:
if (dst_p != NULL)
*dst_p = dst;
if (dst_end_p != NULL)
*dst_end_p = dst_end;
ctx->next_write = dst_end;
return xdu;
}
#define itjc_rotate_hdlc_flag(blevel) \
((u_int8_t)(0x7E7E >> (8 - (u_int8_t)((blevel) >> 8))))
static void
itjc_dma_rx_intr(struct l1_softc *sc, l1_bchan_state_t *chan,
dma_rx_context_t *ctx)
{
u_int8_t *ring,
*dst,
*dst_end,
flag,
blevel;
u_int16_t dma,
src,
tmp2,
tmp,
len,
crc,
ib;
itjc_bus_setup(sc);
if (ctx->state == ITJC_RS_IDLE)
return;
ring = ctx->ring;
dma = itjc_get_dma_offset(ctx, TIGER_DMA_RD_CURR_ADDR);
dma = itjc_ring_sub(dma, 1);
src = ctx->next_read;
if (chan->bprot == BPROT_NONE)
{
dst = itjc_get_rx_mbuf(chan, &dst_end, ITJC_MB_CURR);
while (src != dma)
{
if (dst == NULL)
dst = itjc_get_rx_mbuf(chan, &dst_end,
ITJC_MB_NEW);
*dst++ = ring[src];
src = itjc_ring_add(src, 1);
if (dst >= dst_end)
{
itjc_put_rx_mbuf(sc, chan, BCH_MAX_DATALEN);
dst = dst_end = NULL;
}
}
ctx->next_read = src;
itjc_save_rx_mbuf(chan, dst);
return;
}
blevel = ctx->hdlc_blevel;
flag = ctx->hdlc_flag;
len = ctx->hdlc_len;
tmp = ctx->hdlc_tmp;
crc = ctx->hdlc_crc;
ib = ctx->hdlc_ib;
dst = itjc_get_rx_mbuf(chan, NULL, ITJC_MB_CURR);
while (src != dma)
{
HDLC_DECODE(*dst++, len, tmp, tmp2, blevel, ib, crc, flag,
{/* rdd */
tmp2 = ring[src];
src = itjc_ring_add(src, 1);
},
{/* nfr */
if (dst != NULL)
panic("itjc_dma_rx_intr: nfrcmd with "
"valid current frame");
dst = itjc_get_rx_mbuf(chan, &dst_end, ITJC_MB_NEW);
len = dst_end - dst;
},
{/* cfr */
len = BCH_MAX_DATALEN - len;
if ((!len) || (len > BCH_MAX_DATALEN))
{
/*
* NOTE: frames without any data, only crc
* field, should be silently discared.
*/
NDBGL1(L1_S_MSG, "itjc_dma_rx_intr: "
"bad frame (len=%d, unit=%d)",
len, sc->sc_unit);
itjc_free_rx_mbuf(chan);
goto s0;
}
if (crc)
{
NDBGL1(L1_S_ERR,
"CRC (crc=0x%04x, len=%d, unit=%d)",
crc, len, sc->sc_unit);
itjc_free_rx_mbuf(chan);
goto s0;
}
itjc_put_rx_mbuf(sc, chan, len);
s0:
dst = NULL;
len = 0;
},
{/* rab */
NDBGL1(L1_S_ERR, "Read Abort (unit=%d)", sc->sc_unit);
itjc_free_rx_mbuf(chan);
dst = NULL;
len = 0;
},
{/* rdo */
NDBGL1(L1_S_ERR, "RDO (unit=%d) dma=%d src=%d",
sc->sc_unit, dma, src);
itjc_free_rx_mbuf(chan);
dst = NULL;
len = 0;
},
continue,
d);
}
itjc_save_rx_mbuf(chan, dst);
ctx->next_read = src;
ctx->hdlc_blevel= blevel;
ctx->hdlc_flag = flag;
ctx->hdlc_len = len;
ctx->hdlc_tmp = tmp;
ctx->hdlc_crc = crc;
ctx->hdlc_ib = ib;
}
/*
* The HDLC side of itjc_dma_tx_intr. We made a separate function
* to improve readability and (perhaps) help the compiler with
* register allocation.
*/
static void
itjc_hdlc_encode(struct l1_softc *sc, l1_bchan_state_t *chan,
dma_tx_context_t * ctx)
{
u_int8_t *ring,
*src,
xdu,
flag,
flag_byte,
tx_restart;
u_int16_t saved_len,
dst_end,
dst_end1,
dst,
filled,
blevel,
tmp2,
len,
crc,
ib;
u_int32_t tmp;
saved_len = len = itjc_get_tx_mbuf(sc, chan, &src, ITJC_MB_CURR);
filled = ctx->filled;
flag = ctx->hdlc_flag;
if (src == NULL && flag == 2 && filled >= ITJC_RING_WORDS)
return;
tx_restart = (flag == 2 && src != NULL);
xdu = itjc_xdu(sc, chan, ctx, &dst, &dst_end, tx_restart);
ring = ctx->ring;
ib = ctx->hdlc_ib;
crc = ctx->hdlc_crc;
tmp = ctx->hdlc_tmp;
blevel = ctx->hdlc_blevel;
if (xdu)
{
if (flag != 2)
{
NDBGL1(L1_H_XFRERR, "XDU");
++chan->stat_XDU;
/*
* Abort the current frame and
* prepare for a full restart.
*/
itjc_free_tx_mbufs(chan);
saved_len = len = filled = 0;
flag = (u_int8_t)-2;
}
else if (filled < ITJC_RING_SLOT_WORDS)
{
/*
* A little garbage may have been retransmitted.
* Send an abort before any new data.
*/
filled = 0;
flag = (u_int8_t)-2;
}
}
if (flag != 3)
len = 0;
while (dst != dst_end)
{
HDLC_ENCODE(
*src++, len, tmp, tmp2, blevel, ib, crc, flag,
{/* gfr */
if ((len = saved_len) == 0)
len = itjc_get_tx_mbuf(sc, chan, &src,
ITJC_MB_NEW);
if (len == 0)
{
ctx->next_frame = dst;
flag_byte = itjc_rotate_hdlc_flag(blevel);
for (dst_end1 = itjc_ring_sub(dst_end, 1);
dst != dst_end1;
dst = itjc_ring_add(dst, 1))
{
ring[dst] = flag_byte;
++filled;
}
}
else
filled = 0;
ctx->state = ITJC_TS_ACTIVE;
},
{/* nmb */
saved_len = 0;
len = itjc_get_tx_mbuf(sc, chan, &src, ITJC_MB_NEXT);
},
{/* wrd */
ring[dst] = (u_int8_t)tmp;
dst = itjc_ring_add(dst, 1);
},
d1);
}
ctx->hdlc_blevel = blevel;
ctx->hdlc_flag = flag;
ctx->hdlc_tmp = tmp;
ctx->hdlc_crc = crc;
ctx->hdlc_ib = ib;
ctx->filled = filled;
ctx->next_write = dst;
itjc_save_tx_mbuf(chan, src, len);
}
static void
itjc_dma_tx_intr(struct l1_softc *sc, l1_bchan_state_t *chan,
dma_tx_context_t * ctx)
{
u_int8_t *data_end,
*ring,
*src,
xdu;
u_int16_t dst,
dst_end,
filled,
len;
if (ctx->state == ITJC_TS_IDLE)
goto done;
if (chan->bprot != BPROT_NONE)
{
itjc_hdlc_encode(sc, chan, ctx);
goto done;
}
ring = ctx->ring;
filled = ctx->filled;
len = itjc_get_tx_mbuf(sc, chan, &src, ITJC_MB_CURR);
if (len == 0 && filled >= ITJC_RING_WORDS)
goto done;
xdu = itjc_xdu(sc, chan, ctx, &dst, &dst_end, len != 0);
if (xdu && filled < ITJC_RING_WORDS)
{
NDBGL1(L1_H_XFRERR, "XDU");
++chan->stat_XDU;
filled = 0;
}
if (len == 0)
goto fill_ring;
ctx->state = ITJC_TS_ACTIVE;
data_end = src + len;
while (dst != dst_end)
{
ring[dst] = *src++; --len;
dst = itjc_ring_add(dst, 1);
if (src >= data_end)
{
len = itjc_get_tx_mbuf(sc, chan, &src, ITJC_MB_NEXT);
if (len == 0)
len = itjc_get_tx_mbuf(sc, chan,
&src, ITJC_MB_NEW);
if (len == 0)
{
data_end = NULL;
break;
}
data_end = src + len;
}
}
itjc_save_tx_mbuf(chan, src, len);
filled = 0;
fill_ring:
ctx->next_frame = dst;
for (; dst != dst_end; dst = itjc_ring_add(dst, 1))
{
ring[dst] = ITJC_TEL_SILENCE_BYTE;
++filled;
}
ctx->next_write = dst;
ctx->filled = filled;
done:
return;
}
/*---------------------------------------------------------------------------*
* NetJet fifo read/write routines.
*---------------------------------------------------------------------------*/
static void
itjc_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
itjc_bus_setup(sc);
if (what != ISIC_WHAT_ISAC)
panic("itjc_write_fifo: Trying to read from HSCX fifo.\n");
itjc_set_pib_addr_msb(0);
itjc_read_multi_1(PIB_OFFSET, buf, size);
}
static void
itjc_write_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
itjc_bus_setup(sc);
if (what != ISIC_WHAT_ISAC)
panic("itjc_write_fifo: Trying to write to HSCX fifo.\n");
itjc_set_pib_addr_msb(0);
itjc_write_multi_1(PIB_OFFSET, buf, size);
}
/*---------------------------------------------------------------------------*
* Read an ISAC register.
*---------------------------------------------------------------------------*/
static u_int8_t
itjc_read_reg(struct l1_softc *sc, int what, bus_size_t offs)
{
itjc_bus_setup(sc);
if (what != ISIC_WHAT_ISAC)
{
panic("itjc_read_reg: what(%d) != ISIC_WHAT_ISAC\n",
what);
return 0;
}
itjc_set_pib_addr_msb(offs);
return itjc_read_1(itjc_pib_2_pci(offs));
}
/*---------------------------------------------------------------------------*
* Write an ISAC register.
*---------------------------------------------------------------------------*/
static void
itjc_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data)
{
itjc_bus_setup(sc);
if (what != ISIC_WHAT_ISAC)
{
panic("itjc_write_reg: what(%d) != ISIC_WHAT_ISAC\n",
what);
return;
}
itjc_set_pib_addr_msb(offs);
itjc_write_1(itjc_pib_2_pci(offs), data);
}
/*---------------------------------------------------------------------------*
* itjc_probe - probe for a card.
*---------------------------------------------------------------------------*/
static int itjc_probe(device_t dev)
{
u_int16_t vid = pci_get_vendor(dev),
did = pci_get_device(dev);
if ((vid == PCI_TJNET_VID) && (did == PCI_TJ300_DID))
{
device_set_desc(dev, "NetJet-S");
return 0;
}
return ENXIO;
}
/*---------------------------------------------------------------------------*
* itjc_attach - attach a (previously probed) card.
*---------------------------------------------------------------------------*/
int
itjc_attach(device_t dev)
{
bus_space_handle_t h;
bus_space_tag_t t;
struct l1_softc *sc = device_get_softc(dev);
u_int16_t vid = pci_get_vendor(dev),
did = pci_get_device(dev);
int unit = device_get_unit(dev),
s = splimp(),
res_init_level = 0,
error = 0;
void *ih = 0;
dma_context_t *ctx = &dma_context[unit];
l1_bchan_state_t *chan;
bzero(sc, sizeof(struct l1_softc));
/* Probably not really required. */
if (unit > ITJC_MAXUNIT)
{
printf("itjc%d: Error, unit > ITJC_MAXUNIT!\n", unit);
splx(s);
return ENXIO;
}
if (!(vid == PCI_TJNET_VID && did == PCI_TJ300_DID))
{
printf("itjc%d: unknown device (%04X,%04X)!\n", unit, vid, did);
goto fail;
}
itjc_scp[unit] = sc;
sc->sc_resources.io_rid[0] = PCIR_MAPS+0;
sc->sc_resources.io_base[0] = bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[0], 0, ~0, 1, RF_ACTIVE);
if (sc->sc_resources.io_base[0] == NULL)
{
printf("itjc%d: couldn't map IO port\n", unit);
error = ENXIO;
goto fail;
}
h = rman_get_bushandle(sc->sc_resources.io_base[0]);
t = rman_get_bustag(sc->sc_resources.io_base[0]);
++res_init_level;
/* Allocate interrupt. */
sc->sc_resources.irq_rid = 0;
sc->sc_resources.irq = bus_alloc_resource(dev, SYS_RES_IRQ,
&sc->sc_resources.irq_rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE);
if (sc->sc_resources.irq == NULL)
{
printf("itjc%d: couldn't map interrupt\n", unit);
error = ENXIO;
goto fail;
}
++res_init_level;
error = bus_setup_intr(dev, sc->sc_resources.irq, INTR_TYPE_NET,
itjc_intr, sc, &ih);
if (error)
{
printf("itjc%d: couldn't set up irq handler\n", unit);
error = ENXIO;
goto fail;
}
/*
* Reset the ASIC & the ISAC.
*/
itjc_write_1(TIGER_RESET_PIB_CL_TIME, TIGER_RESET_ALL);
DELAY(SEC_DELAY/100); /* Give it 10 ms to reset ...*/
itjc_write_1(TIGER_RESET_PIB_CL_TIME,
TIGER_SELF_ADDR_DMA | TIGER_PIB_3_CYCLES);
DELAY(SEC_DELAY/100); /* ... and more 10 to recover. */
/*
* First part of DMA initialization. Create & map the memory
* pool that will be used to bear the rx & tx ring buffers.
*/
ctx->state = ITJC_DS_LOADING;
error = bus_dma_tag_create(
NULL, /* parent */
4, /* alignment*/
0, /* boundary*/
BUS_SPACE_MAXADDR_32BIT, /* lowaddr*/
BUS_SPACE_MAXADDR, /* highaddr*/
NULL, /* filter*/
NULL, /* filterarg*/
ITJC_DMA_POOL_BYTES, /* maxsize*/
1, /* nsegments*/
ITJC_DMA_POOL_BYTES, /* maxsegsz*/
BUS_DMA_ALLOCNOW | BUS_DMAMEM_NOSYNC, /* flags*/
&ctx->tag);
if (error)
{
printf("itjc%d: couldn't create bus DMA tag.\n", unit);
goto fail;
}
++res_init_level;
error = bus_dmamem_alloc(
ctx->tag, /* DMA tag */
(void **)&ctx->pool, /* KV addr of the allocated memory */
BUS_DMA_NOWAIT | BUS_DMAMEM_NOSYNC, /* flags */
&ctx->map); /* KV <-> PCI map */
if (error)
goto fail;
/*
* Load the KV <-> PCI map so the device sees the same
* memory segment as pointed by pool. Note: since the
* load may happen assyncronously (completion indicated by
* the execution of the callback function) we have to
* delay the initialization of the DMA engine to a moment we
* actually have the proper bus addresses to feed the Tiger
* and our DMA control blocks. This will be done in
* itjc_bchannel_setup via a call to itjc_dma_start.
*/
bus_dmamap_load(
ctx->tag, /* DMA tag */
ctx->map, /* DMA map */
ctx->pool, /* KV addr of buffer */
ITJC_DMA_POOL_BYTES, /* buffer size */
itjc_map_callback, /* this receive the bus addr/error */
ctx, /* callback aux arg */
0); /* flags */
++res_init_level;
/*
* Setup the AUX port so we can talk to the ISAC.
*/
itjc_write_1(TIGER_AUX_PORT_CNTL, TIGER_AUX_NJ_DEFAULT);
itjc_write_1(TIGER_INT1_MASK, TIGER_ISAC_INT);
/*
* From now on, almost like a `normal' ISIC driver.
*/
sc->sc_unit = unit;
ISAC_BASE = (caddr_t)ISIC_WHAT_ISAC;
HSCX_A_BASE = (caddr_t)ISIC_WHAT_HSCXA;
HSCX_B_BASE = (caddr_t)ISIC_WHAT_HSCXB;
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = itjc_read_reg;
sc->writereg = itjc_write_reg;
sc->readfifo = itjc_read_fifo;
sc->writefifo = itjc_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_NETJET_S;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
/* set up some other miscellaneous things */
sc->sc_ipac = 0;
sc->sc_bfifolen = 2 * ITJC_RING_SLOT_WORDS;
printf("itjc%d: ISAC 2186 Version 1.1 (IOM-2)\n", unit);
/* init the ISAC */
itjc_isac_init(sc);
chan = &sc->sc_chan[HSCX_CH_A];
if(!mtx_initialized(&chan->rx_queue.ifq_mtx))
mtx_init(&chan->rx_queue.ifq_mtx, "i4b_avma1pp_rx", NULL, MTX_DEF);
if(!mtx_initialized(&chan->tx_queue.ifq_mtx))
mtx_init(&chan->tx_queue.ifq_mtx, "i4b_avma1pp_tx", NULL, MTX_DEF);
chan = &sc->sc_chan[HSCX_CH_B];
if(!mtx_initialized(&chan->rx_queue.ifq_mtx))
mtx_init(&chan->rx_queue.ifq_mtx, "i4b_avma1pp_rx", NULL, MTX_DEF);
if(!mtx_initialized(&chan->tx_queue.ifq_mtx))
mtx_init(&chan->tx_queue.ifq_mtx, "i4b_avma1pp_tx", NULL, MTX_DEF);
/* init the "HSCX" */
itjc_bchannel_setup(sc->sc_unit, HSCX_CH_A, BPROT_NONE, 0);
itjc_bchannel_setup(sc->sc_unit, HSCX_CH_B, BPROT_NONE, 0);
/* can't use the normal B-Channel stuff */
itjc_init_linktab(sc);
/* set trace level */
sc->sc_trace = TRACE_OFF;
sc->sc_state = ISAC_IDLE;
sc->sc_ibuf = NULL;
sc->sc_ib = NULL;
sc->sc_ilen = 0;
sc->sc_obuf = NULL;
sc->sc_op = NULL;
sc->sc_ol = 0;
sc->sc_freeflag = 0;
sc->sc_obuf2 = NULL;
sc->sc_freeflag2 = 0;
#if defined(__FreeBSD__) && __FreeBSD__ >=3
callout_handle_init(&sc->sc_T3_callout);
callout_handle_init(&sc->sc_T4_callout);
#endif
/* init higher protocol layers */
i4b_l1_mph_status_ind(L0ITJCUNIT(sc->sc_unit), STI_ATTACH,
sc->sc_cardtyp, &itjc_l1mux_func);
splx(s);
return 0;
fail:
switch (res_init_level)
{
case 5:
bus_dmamap_unload(ctx->tag, ctx->map);
/* FALL TRHU */
case 4:
bus_dmamem_free(ctx->tag, ctx->pool, ctx->map);
bus_dmamap_destroy(ctx->tag, ctx->map);
/* FALL TRHU */
case 3:
bus_dma_tag_destroy(ctx->tag);
/* FALL TRHU */
case 2:
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_resources.irq);
/* FALL TRHU */
case 1:
bus_release_resource(dev, SYS_RES_IOPORT, PCIR_MAPS+0,
sc->sc_resources.io_base[0]);
/* FALL TRHU */
case 0:
break;
}
itjc_scp[unit] = NULL;
splx(s);
return error;
}
/*---------------------------------------------------------------------------*
* itjc_intr - main interrupt service routine.
*---------------------------------------------------------------------------*/
static void
itjc_intr(void *xsc)
{
struct l1_softc *sc = xsc;
l1_bchan_state_t *chan = &sc->sc_chan[0];
dma_context_t *dma = &dma_context[sc->sc_unit];
dma_rx_context_t *rxc = &dma_rx_context[sc->sc_unit][0];
dma_tx_context_t *txc = &dma_tx_context[sc->sc_unit][0];
itjc_bus_setup(sc);
/* Honor interrupts from successfully configured cards only. */
if (dma->state < ITJC_DS_STOPPED)
return;
/* First, we check the ISAC... */
if (! (itjc_read_1(TIGER_AUX_PORT_DATA) & TIGER_ISAC_INT_MASK))
{
itjc_write_1(TIGER_INT1_STATUS, TIGER_ISAC_INT);
NDBGL1(L1_H_IRQ, "ISAC");
itjc_isac_intr(sc);
}
/* ... after what we always have a look at the DMA rings. */
NDBGL1(L1_H_IRQ, "Tiger");
itjc_read_1(TIGER_INT0_STATUS);
itjc_write_1(TIGER_INT0_STATUS, TIGER_TARGET_ABORT_INT
| TIGER_MASTER_ABORT_INT | TIGER_RD_END_INT
| TIGER_RD_INT_INT | TIGER_WR_END_INT | TIGER_WR_INT_INT);
itjc_dma_rx_intr(sc, chan, rxc);
itjc_dma_tx_intr(sc, chan, txc);
++chan; ++rxc; ++txc;
itjc_dma_rx_intr(sc, chan, rxc);
itjc_dma_tx_intr(sc, chan, txc);
}
/*---------------------------------------------------------------------------*
* itjc_bchannel_setup - (Re)initialize and start/stop a Bchannel.
*---------------------------------------------------------------------------*/
static void
itjc_bchannel_setup(int unit, int h_chan, int bprot, int activate)
{
#ifdef __FreeBSD__
struct l1_softc *sc = itjc_scp[unit];
#else
struct l1_softc *sc = isic_find_sc(unit);
#endif
l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
int s = SPLI4B();
NDBGL1(L1_BCHAN, "unit=%d, channel=%d, %s",
unit, h_chan, activate ? "activate" : "deactivate");
/*
* If we are deactivating the channel, we have to stop
* the DMA before we reset the channel control structures.
*/
if (! activate)
itjc_bchannel_dma_setup(sc, h_chan, activate);
/* general part */
chan->state = HSCX_IDLE;
chan->unit = sc->sc_unit; /* unit number */
chan->channel = h_chan; /* B channel */
chan->bprot = bprot; /* B channel protocol */
/* receiver part */
i4b_Bcleanifq(&chan->rx_queue); /* clean rx queue */
chan->rx_queue.ifq_maxlen = IFQ_MAXLEN;
chan->rxcount = 0; /* reset rx counter */
i4b_Bfreembuf(chan->in_mbuf); /* clean rx mbuf */
chan->in_mbuf = NULL; /* reset mbuf ptr */
chan->in_cbptr = NULL; /* reset mbuf curr ptr */
chan->in_len = 0; /* reset mbuf data len */
/* transmitter part */
i4b_Bcleanifq(&chan->tx_queue); /* clean tx queue */
chan->tx_queue.ifq_maxlen = IFQ_MAXLEN;
chan->txcount = 0; /* reset tx counter */
i4b_Bfreembuf(chan->out_mbuf_head); /* clean tx mbuf */
chan->out_mbuf_head = NULL; /* reset head mbuf ptr */
chan->out_mbuf_cur = NULL; /* reset current mbuf ptr */
chan->out_mbuf_cur_ptr = NULL; /* reset current mbuf data ptr */
chan->out_mbuf_cur_len = 0; /* reset current mbuf data cnt */
/*
* Only setup & start the DMA after all other channel
* control structures are in place.
*/
if (activate)
itjc_bchannel_dma_setup(sc, h_chan, activate);
splx(s);
}
/*---------------------------------------------------------------------------*
* itjc_bchannel_start - Signal us we have more data to send.
*---------------------------------------------------------------------------*/
static void
itjc_bchannel_start(int unit, int h_chan)
{
#if Buggy_code
/*
* I disabled this routine because it was causing crashes when
* this driver was used with the ISP (kernel SPPP) protocol driver.
* The scenario is reproductible:
* Use the -link1 (dial on demand) ifconfig option.
* Start an interactive TCP connection to somewhere.
* Wait until the PPP connection times out and is dropped.
* Try to send something on the TCP connection.
* The machine will print some garbage and halt or reboot
* (no panic messages).
*
* I've nailed down the problem to the fact that this routine
* was being called before the B channel had been setup again.
*
* For now, I don't have a good solution other than this one.
* But, don't despair. The impact of it is unnoticeable.
*/
#ifdef __FreeBSD__
struct l1_softc *sc = itjc_scp[unit];
#else
struct l1_softc *sc = isic_find_sc(unit);
#endif
l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
int s = SPLI4B();
dma_tx_context_t *txc = &dma_tx_context[unit][h_chan];
if (chan->state & HSCX_TX_ACTIVE)
{
splx(s);
return;
}
itjc_dma_tx_intr(sc, chan, txc);
splx(s);
#endif
}
/*---------------------------------------------------------------------------*
* itjc_shutdown - Stop the driver and reset the card.
*---------------------------------------------------------------------------*/
static void
itjc_shutdown(device_t dev)
{
struct l1_softc *sc = device_get_softc(dev);
itjc_bus_setup(sc);
/*
* Stop the DMA the nice and easy way.
*/
itjc_bchannel_setup(sc->sc_unit, 0, BPROT_NONE, 0);
itjc_bchannel_setup(sc->sc_unit, 1, BPROT_NONE, 0);
/*
* Reset the card.
*/
itjc_write_1(TIGER_RESET_PIB_CL_TIME, TIGER_RESET_ALL);
DELAY(SEC_DELAY/100); /* Give it 10 ms to reset ...*/
itjc_write_1(TIGER_RESET_PIB_CL_TIME,
TIGER_SELF_ADDR_DMA | TIGER_LATCH_DMA_INT | TIGER_PIB_3_CYCLES);
DELAY(SEC_DELAY/100); /* ... and more 10 to recover */
}
/*---------------------------------------------------------------------------*
* itjc_ret_linktab - Return the address of itjc drivers linktab.
*---------------------------------------------------------------------------*/
isdn_link_t *
itjc_ret_linktab(int unit, int channel)
{
#ifdef __FreeBSD__
struct l1_softc *sc = itjc_scp[unit];
#else
struct l1_softc *sc = isic_find_sc(unit);
#endif
l1_bchan_state_t *chan = &sc->sc_chan[channel];
return(&chan->isic_isdn_linktab);
}
/*---------------------------------------------------------------------------*
* itjc_set_linktab - Set the driver linktab in the b channel softc.
*---------------------------------------------------------------------------*/
void
itjc_set_linktab(int unit, int channel, drvr_link_t *dlt)
{
#ifdef __FreeBSD__
struct l1_softc *sc = itjc_scp[unit];
#else
struct l1_softc *sc = isic_find_sc(unit);
#endif
l1_bchan_state_t *chan = &sc->sc_chan[channel];
chan->isic_drvr_linktab = dlt;
}
/*---------------------------------------------------------------------------*
* itjc_init_linktab - Initialize our local linktab.
*---------------------------------------------------------------------------*/
static void
itjc_init_linktab(struct l1_softc *sc)
{
l1_bchan_state_t *chan = &sc->sc_chan[HSCX_CH_A];
isdn_link_t *lt = &chan->isic_isdn_linktab;
/* make sure the hardware driver is known to layer 4 */
/* avoid overwriting if already set */
if (ctrl_types[CTRL_PASSIVE].set_linktab == NULL)
{
ctrl_types[CTRL_PASSIVE].set_linktab = itjc_set_linktab;
ctrl_types[CTRL_PASSIVE].get_linktab = itjc_ret_linktab;
}
/* local setup */
lt->unit = sc->sc_unit;
lt->channel = HSCX_CH_A;
lt->bch_config = itjc_bchannel_setup;
lt->bch_tx_start = itjc_bchannel_start;
lt->bch_stat = itjc_bchannel_stat;
lt->tx_queue = &chan->tx_queue;
/* used by non-HDLC data transfers, i.e. telephony drivers */
lt->rx_queue = &chan->rx_queue;
/* used by HDLC data transfers, i.e. ipr and isp drivers */
lt->rx_mbuf = &chan->in_mbuf;
chan = &sc->sc_chan[HSCX_CH_B];
lt = &chan->isic_isdn_linktab;
lt->unit = sc->sc_unit;
lt->channel = HSCX_CH_B;
lt->bch_config = itjc_bchannel_setup;
lt->bch_tx_start = itjc_bchannel_start;
lt->bch_stat = itjc_bchannel_stat;
lt->tx_queue = &chan->tx_queue;
/* used by non-HDLC data transfers, i.e. telephony drivers */
lt->rx_queue = &chan->rx_queue;
/* used by HDLC data transfers, i.e. ipr and isp drivers */
lt->rx_mbuf = &chan->in_mbuf;
}
/*---------------------------------------------------------------------------*
* itjc_bchannel_stat - Collect link statistics for a given B channel.
*---------------------------------------------------------------------------*/
static void
itjc_bchannel_stat(int unit, int h_chan, bchan_statistics_t *bsp)
{
#ifdef __FreeBSD__
struct l1_softc *sc = itjc_scp[unit];
#else
struct l1_softc *sc = isic_find_sc(unit);
#endif
l1_bchan_state_t *chan = &sc->sc_chan[h_chan];
int s;
s = SPLI4B();
bsp->outbytes = chan->txcount;
bsp->inbytes = chan->rxcount;
chan->txcount = 0;
chan->rxcount = 0;
splx(s);
}
/*---------------------------------------------------------------------------*
* Netjet - ISAC interrupt routine.
*---------------------------------------------------------------------------*/
static void
itjc_isac_intr(struct l1_softc *sc)
{
register u_char irq_stat;
do
{
/* get isac irq status */
irq_stat = ISAC_READ(I_ISTA);
if(irq_stat)
itjc_isac_irq(sc, irq_stat); /* isac handler */
}
while(irq_stat);
ISAC_WRITE(I_MASK, 0xff);
DELAY(100);
ISAC_WRITE(I_MASK, ISAC_IMASK);
}
/*---------------------------------------------------------------------------*
* itjc_recover - Try to recover from ISAC irq lockup.
*---------------------------------------------------------------------------*/
void
itjc_recover(struct l1_softc *sc)
{
u_char byte;
/* get isac irq status */
byte = ISAC_READ(I_ISTA);
NDBGL1(L1_ERROR, " ISAC: ISTA = 0x%x", byte);
if(byte & ISAC_ISTA_EXI)
NDBGL1(L1_ERROR, " ISAC: EXIR = 0x%x", (u_char)ISAC_READ(I_EXIR));
if(byte & ISAC_ISTA_CISQ)
{
byte = ISAC_READ(I_CIRR);
NDBGL1(L1_ERROR, " ISAC: CISQ = 0x%x", byte);
if(byte & ISAC_CIRR_SQC)
NDBGL1(L1_ERROR, " ISAC: SQRR = 0x%x", (u_char)ISAC_READ(I_SQRR));
}
NDBGL1(L1_ERROR, " ISAC: IMASK = 0x%x", ISAC_IMASK);
ISAC_WRITE(I_MASK, 0xff);
DELAY(100);
ISAC_WRITE(I_MASK, ISAC_IMASK);
}
Reference in New Issue View Git Blame Copy Permalink