freebsd-dev/sys/i4b/layer1/i4b_isic_pci.c
Peter Wemm 38a67d80b4 Use COMPAT_PCI_DRIVER() for registration if it exists. This shouldn't
hurt the driver portability to 3.x too much for where drivers are shared.
1999-04-24 20:24:02 +00:00

474 lines
11 KiB
C

/*
* Copyright (c) 1997, 1999 Hellmuth Michaelis. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* i4b_isic_pci.c - PCI bus interface
* ==================================
*
* $Id: i4b_isic_pci.c,v 1.3 1999/03/07 16:08:16 hm Exp $
*
* last edit-date: [Wed Feb 17 15:19:44 1999]
*
*---------------------------------------------------------------------------*/
#include "isic.h"
#if defined(__FreeBSD__)
#include "opt_i4b.h"
#include "pci.h"
#endif
#if (NISIC > 0) && (NPCI > 0)
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#ifdef __FreeBSD__
#if __FreeBSD__ >= 3
#include <sys/ioccom.h>
#else
#include <sys/ioctl.h>
#endif
#include <machine/clock.h>
#include <i386/isa/isa_device.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#else
#include <machine/bus.h>
#include <sys/device.h>
#endif
#ifdef __FreeBSD__
#include <machine/i4b_debug.h>
#include <machine/i4b_ioctl.h>
#else
#include <i4b/i4b_debug.h>
#include <i4b/i4b_ioctl.h>
#endif
#include <i4b/include/i4b_global.h>
#include <i4b/include/i4b_l1l2.h>
#include <i4b/include/i4b_mbuf.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/i4b_ipac.h>
#include <i4b/layer1/i4b_isac.h>
#include <i4b/layer1/i4b_hscx.h>
#define PCI_QS1000_ID 0x10001048
#define PCI_AVMA1_ID 0x0a001244
#define MEM0_MAPOFF 0
#define PORT0_MAPOFF 4
#define PORT1_MAPOFF 12
static char* i4b_pci_probe(pcici_t tag, pcidi_t type);
static void i4b_pci_attach(pcici_t config_id, int unit);
static int isic_pciattach(int unit, u_long type, u_int iobase1, u_int iobase2);
static u_long i4b_pci_count = 0;
static struct pci_device i4b_pci_driver = {
"isic",
i4b_pci_probe,
i4b_pci_attach,
&i4b_pci_count,
NULL
};
#ifndef COMPAT_PCI_DRIVER
DATA_SET (pcidevice_set, i4b_pci_driver);
#else
COMPAT_PCI_DRIVER (isic_pci, i4b_pci_driver);
#endif /* COMPAT_PCI_DRIVER */
static void isic_pci_intr_sc(struct isic_softc *sc);
#ifdef AVM_A1_PCI
extern void avma1pp_map_int(pcici_t, void *, unsigned *);
#endif
/*---------------------------------------------------------------------------*
* PCI probe routine
*---------------------------------------------------------------------------*/
static char *
i4b_pci_probe(pcici_t tag, pcidi_t type)
{
switch(type)
{
case PCI_QS1000_ID:
return("ELSA QuickStep 1000pro PCI ISDN adapter");
case PCI_AVMA1_ID:
return("AVM Fritz!Card PCI ISDN adapter");
default:
if(bootverbose)
printf("i4b_pci_probe: unknown PCI type %ul!\n", (u_int)type);
return(NULL);
}
return(NULL);
}
/*---------------------------------------------------------------------------*
* PCI attach routine
*---------------------------------------------------------------------------*/
static void
i4b_pci_attach(pcici_t config_id, int unit)
{
unsigned short iobase1;
unsigned short iobase2;
unsigned long type;
struct isic_softc *sc = &isic_sc[unit];
u_long reg1, reg2;
if(unit != next_isic_unit)
{
printf("i4b_pci_attach: Error: new unit (%d) != next_isic_unit (%d)!\n", unit, next_isic_unit);
return;
}
/* IMHO the all following should be done in the low-level driver - GJ */
type = pci_conf_read(config_id, PCI_ID_REG);
/* not all cards have their ports at the same location !!! */
switch(type)
{
case PCI_QS1000_ID:
reg1 = PCI_MAP_REG_START+PORT0_MAPOFF;
reg2 = PCI_MAP_REG_START+PORT1_MAPOFF;
break;
case PCI_AVMA1_ID:
reg1 = PCI_MAP_REG_START+PORT0_MAPOFF;
reg2 = 0;
break;
default:
reg1 = PCI_MAP_REG_START+PORT0_MAPOFF;
reg2 = PCI_MAP_REG_START+PORT1_MAPOFF;
break;
}
if(reg1 && !(pci_map_port(config_id, reg1, &iobase1)))
{
printf("i4b_pci_attach: pci_map_port 1 failed!\n");
return;
}
if(reg2 && !(pci_map_port(config_id, reg2, &iobase2)))
{
printf("i4b_pci_attach: pci_map_port 2 failed!\n");
return;
}
if(bootverbose)
printf("i4b_pci_attach: unit %d, port0 0x%x, port1 0x%x\n", unit, iobase1, iobase2);
if((isic_pciattach(unit, type, iobase1, iobase2)) == 0)
return;
#ifdef AVM_A1_PCI
/* the AVM FRTIZ!PCI needs to handle its own interrupts */
if (type == PCI_AVMA1_ID)
{
avma1pp_map_int(config_id, (void *)sc, &net_imask);
return;
}
#endif
/* seems like this should be done before the attach in case it fails */
if(!(pci_map_int(config_id, (void *)isic_pci_intr_sc, (void *)sc, &net_imask)))
return;
}
/*---------------------------------------------------------------------------*
* isic - pci device driver attach routine
*---------------------------------------------------------------------------*/
static int
isic_pciattach(int unit, u_long type, u_int iobase1, u_int iobase2)
{
int ret = 0;
struct isic_softc *sc = &isic_sc[unit];
static char *ISACversion[] = {
"2085 Version A1/A2 or 2086/2186 Version 1.1",
"2085 Version B1",
"2085 Version B2",
"2085 Version V2.3 (B3)",
"Unknown Version"
};
static char *HSCXversion[] = {
"82525 Version A1",
"Unknown (0x01)",
"82525 Version A2",
"Unknown (0x03)",
"82525 Version A3",
"82525 or 21525 Version 2.1",
"Unknown Version"
};
switch(type)
{
#ifdef ELSA_QS1PCI
case PCI_QS1000_ID:
ret = isic_attach_Eqs1pp(unit, iobase1, iobase2);
break;
#endif
#ifdef AVM_A1_PCI
case PCI_AVMA1_ID:
ret = isic_attach_avma1pp(unit, iobase1, iobase2);
if (ret)
next_isic_unit++;
return(ret);
#endif
default:
break;
}
if(ret == 0)
return(ret);
sc->sc_isac_version = 0;
sc->sc_hscx_version = 0;
sc->sc_unit = unit;
if(sc->sc_ipac)
{
ret = IPAC_READ(IPAC_ID);
switch(ret)
{
case 0x01:
printf("isic%d: IPAC PSB2115 Version 1.1\n", unit);
break;
default:
printf("isic%d: Error, IPAC version %d unknown!\n",
unit, ret);
return(0);
break;
}
}
else
{
sc->sc_isac_version = ((ISAC_READ(I_RBCH)) >> 5) & 0x03;
switch(sc->sc_isac_version)
{
case ISAC_VA:
case ISAC_VB1:
case ISAC_VB2:
case ISAC_VB3:
printf("isic%d: ISAC %s (IOM-%c)\n",
unit,
ISACversion[sc->sc_isac_version],
sc->sc_bustyp == BUS_TYPE_IOM1 ? '1' : '2');
break;
default:
printf("isic%d: Error, ISAC version %d unknown!\n",
unit, sc->sc_isac_version);
return(0);
break;
}
sc->sc_hscx_version = HSCX_READ(0, H_VSTR) & 0xf;
switch(sc->sc_hscx_version)
{
case HSCX_VA1:
case HSCX_VA2:
case HSCX_VA3:
case HSCX_V21:
printf("isic%d: HSCX %s\n",
unit,
HSCXversion[sc->sc_hscx_version]);
break;
default:
printf("isic%d: Error, HSCX version %d unknown!\n",
unit, sc->sc_hscx_version);
return(0);
break;
}
}
/* ISAC setup */
isic_isac_init(sc);
/* HSCX setup */
isic_bchannel_setup(sc->sc_unit, HSCX_CH_A, BPROT_NONE, 0);
isic_bchannel_setup(sc->sc_unit, HSCX_CH_B, BPROT_NONE, 0);
/* setup linktab */
isic_init_linktab(sc);
/* set trace level */
sc->sc_trace = TRACE_OFF;
sc->sc_state = ISAC_IDLE;
sc->sc_ibuf = NULL;
sc->sc_ib = NULL;
sc->sc_ilen = 0;
sc->sc_obuf = NULL;
sc->sc_op = NULL;
sc->sc_ol = 0;
sc->sc_freeflag = 0;
sc->sc_obuf2 = NULL;
sc->sc_freeflag2 = 0;
#if defined(__FreeBSD__) && __FreeBSD__ >=3
callout_handle_init(&sc->sc_T3_callout);
callout_handle_init(&sc->sc_T4_callout);
#endif
/* init higher protocol layers */
MPH_Status_Ind(sc->sc_unit, STI_ATTACH, sc->sc_cardtyp);
next_isic_unit++;
return(1);
}
/*---------------------------------------------------------------------------*
* isic - PCI device driver interrupt routine
*---------------------------------------------------------------------------*/
static void
isic_pci_intr_sc(struct isic_softc *sc)
{
if(sc->sc_ipac == 0) /* HSCX/ISAC interupt routine */
{
register u_char hscx_irq_stat;
register u_char isac_irq_stat;
for(;;)
{
/* get hscx irq status from hscx b ista */
hscx_irq_stat =
HSCX_READ(HSCX_CH_B, H_ISTA) & ~HSCX_B_IMASK;
/* get isac irq status */
isac_irq_stat = ISAC_READ(I_ISTA);
/* do as long as there are pending irqs in the chips */
if(!hscx_irq_stat && !isac_irq_stat)
break;
if(hscx_irq_stat & (HSCX_ISTA_RME | HSCX_ISTA_RPF |
HSCX_ISTA_RSC | HSCX_ISTA_XPR |
HSCX_ISTA_TIN | HSCX_ISTA_EXB))
{
isic_hscx_irq(sc, hscx_irq_stat,
HSCX_CH_B,
hscx_irq_stat & HSCX_ISTA_EXB);
}
if(hscx_irq_stat & (HSCX_ISTA_ICA | HSCX_ISTA_EXA))
{
isic_hscx_irq(sc,
HSCX_READ(HSCX_CH_A, H_ISTA) & ~HSCX_A_IMASK,
HSCX_CH_A,
hscx_irq_stat & HSCX_ISTA_EXA);
}
if(isac_irq_stat)
{ /* isac handler */
isic_isac_irq(sc, isac_irq_stat);
}
}
HSCX_WRITE(0, H_MASK, 0xff);
ISAC_WRITE(I_MASK, 0xff);
HSCX_WRITE(1, H_MASK, 0xff);
DELAY(100);
HSCX_WRITE(0, H_MASK, HSCX_A_IMASK);
ISAC_WRITE(I_MASK, ISAC_IMASK);
HSCX_WRITE(1, H_MASK, HSCX_B_IMASK);
}
else /* IPAC interrupt routine */
{
register u_char ipac_irq_stat;
for(;;)
{
/* get global irq status */
ipac_irq_stat = (IPAC_READ(IPAC_ISTA)) & 0x3f;
/* do as long as there are pending irqs in the chip */
if(!ipac_irq_stat)
break;
/* check hscx a */
if(ipac_irq_stat & (IPAC_ISTA_ICA | IPAC_ISTA_EXA))
{
/* HSCX A interrupt */
isic_hscx_irq(sc, HSCX_READ(HSCX_CH_A, H_ISTA),
HSCX_CH_A,
ipac_irq_stat & IPAC_ISTA_EXA);
}
if(ipac_irq_stat & (IPAC_ISTA_ICB | IPAC_ISTA_EXB))
{
/* HSCX B interrupt */
isic_hscx_irq(sc, HSCX_READ(HSCX_CH_B, H_ISTA),
HSCX_CH_B,
ipac_irq_stat & IPAC_ISTA_EXB);
}
if(ipac_irq_stat & (IPAC_ISTA_ICD | IPAC_ISTA_EXD))
{
/* ISAC interrupt */
isic_isac_irq(sc, ISAC_READ(I_ISTA));
}
}
IPAC_WRITE(IPAC_MASK, 0xff);
DELAY(50);
IPAC_WRITE(IPAC_MASK, 0xc0);
}
}
#endif /* (NISIC > 0) && (NPCI > 0) */