freebsd-dev/contrib/ntp/ntpd/refclock_atom.c
2001-08-29 14:35:15 +00:00

501 lines
14 KiB
C

/*
* refclock_atom - clock driver for 1-pps signals
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#include <stdio.h>
#include <ctype.h>
#include "ntpd.h"
#include "ntp_io.h"
#include "ntp_unixtime.h"
#include "ntp_refclock.h"
#include "ntp_stdlib.h"
#if defined(REFCLOCK) && defined(CLOCK_ATOM)
#ifdef HAVE_PPSAPI
# ifdef HAVE_TIMEPPS_H
# include <timepps.h>
# else
# ifdef HAVE_SYS_TIMEPPS_H
# include <sys/timepps.h>
# endif
# endif
#endif /* HAVE_PPSAPI */
/*
* This driver furnishes an interface for pulse-per-second (PPS) signals
* produced by a cesium clock, timing receiver or related equipment. It
* can be used to remove accumulated jitter and retime a secondary
* server when synchronized to a primary server over a congested, wide-
* area network and before redistributing the time to local clients.
*
* Before this driver becomes active, the local clock must be set to
* within +-500 ms by another means, such as a radio clock or NTP
* itself. There are two ways to connect the PPS signal, normally at TTL
* levels, to the computer. One is to shift to EIA levels and connect to
* pin 8 (DCD) of a serial port. This requires a level converter and
* may require a one-shot flipflop to lengthen the pulse. The other is
* to connect the PPS signal directly to pin 10 (ACK) of a PC paralell
* port. These methods are architecture dependent.
*
* Both methods require a modified device driver and kernel interface
* compatible with the Pulse-per-Second API for Unix-like Operating
* Systems, Version 1.0, RFC-2783 (PPSAPI). Implementations are
* available for FreeBSD, Linux, SunOS, Solaris and Alpha. However, at
* present only the Alpha implementation provides the full generality of
* the API with multiple PPS drivers and multiple handles per driver.
*
* In many configurations a single port is used for the radio timecode
* and PPS signal. In order to provide for this configuration and others
* involving dedicated multiple serial/parallel ports, the driver first
* attempts to open the device /dev/pps%d, where %d is the unit number.
* If this fails, the driver attempts to open the device specified by
* the pps configuration command. If a port is to be shared, the pps
* command must be placed before the radio device(s) and the radio
* device(s) must be placed before the PPS driver(s) in the
* configuration file.
*
* This driver normally uses the PLL/FLL clock discipline implemented in
* the ntpd code. If kernel support is available, the kernel PLL/FLL
* clock discipline is used instead. The default configuration is not to
* use the kernel PPS discipline, if present. The kernel PPS discipline
* can be enabled using the pps command.
*
* Fudge Factors
*
* There are no special fudge factors other than the generic. The fudge
* time1 parameter can be used to compensate for miscellaneous device
* driver and OS delays.
*/
/*
* Interface definitions
*/
#ifdef HAVE_PPSAPI
extern int pps_assert; /* selects rising or falling edge */
extern int pps_hardpps; /* enables the kernel PPS interface */
#define DEVICE "/dev/pps%d" /* device name and unit */
#endif /* HAVE_PPSAPI */
#define PRECISION (-20) /* precision assumed (about 1 us) */
#define REFID "PPS\0" /* reference ID */
#define DESCRIPTION "PPS Clock Discipline" /* WRU */
#define NANOSECOND 1000000000 /* one second (ns) */
#define RANGEGATE 500000 /* range gate (ns) */
#define ASTAGE 8 /* filter stages */
static struct peer *pps_peer; /* atom driver for PPS sources */
#ifdef HAVE_PPSAPI
/*
* PPS unit control structure
*/
struct ppsunit {
struct timespec ts; /* last timestamp */
int fddev; /* pps device descriptor */
pps_params_t pps_params; /* pps parameters */
pps_info_t pps_info; /* last pps data */
pps_handle_t handle; /* pps handlebars */
};
#endif /* HAVE_PPSAPI */
/*
* Function prototypes
*/
static int atom_start P((int, struct peer *));
static void atom_poll P((int, struct peer *));
#ifdef HAVE_PPSAPI
static void atom_shutdown P((int, struct peer *));
static void atom_control P((int, struct refclockstat *, struct
refclockstat *, struct peer *));
static int atom_pps P((struct peer *));
static int atom_ppsapi P((struct peer *, int, int));
#endif /* HAVE_PPSAPI */
/*
* Transfer vector
*/
struct refclock refclock_atom = {
atom_start, /* start up driver */
#ifdef HAVE_PPSAPI
atom_shutdown, /* shut down driver */
#else
noentry, /* shut down driver */
#endif /* HAVE_PPSAPI */
atom_poll, /* transmit poll message */
#ifdef HAVE_PPSAPI
atom_control, /* fudge control */
#else
noentry, /* fudge control */
#endif /* HAVE_PPSAPI */
noentry, /* initialize driver */
noentry, /* not used (old atom_buginfo) */
NOFLAGS /* not used */
};
/*
* atom_start - initialize data for processing
*/
static int
atom_start(
int unit, /* unit number (not used) */
struct peer *peer /* peer structure pointer */
)
{
struct refclockproc *pp;
#ifdef HAVE_PPSAPI
register struct ppsunit *up;
char device[80];
#endif /* HAVE_PPSAPI */
/*
* Allocate and initialize unit structure
*/
pps_peer = peer;
pp = peer->procptr;
peer->precision = PRECISION;
pp->clockdesc = DESCRIPTION;
memcpy((char *)&pp->refid, REFID, 4);
peer->burst = ASTAGE;
peer->stratum = STRATUM_UNSPEC;
#ifdef HAVE_PPSAPI
up = emalloc(sizeof(struct ppsunit));
memset(up, 0, sizeof(struct ppsunit));
pp->unitptr = (caddr_t)up;
/*
* Open PPS device. If this fails and some driver has already
* opened the associated radio device, fdpps has the file
* descriptor for it.
*/
sprintf(device, DEVICE, unit);
up->fddev = open(device, O_RDWR, 0777);
if (up->fddev <= 0 && fdpps > 0) {
strcpy(device, pps_device);
up->fddev = fdpps;
}
if (up->fddev <= 0) {
msyslog(LOG_ERR,
"refclock_atom: %s: %m", device);
return (0);
}
/*
* Light off the PPSAPI interface. If this PPS device is shared
* with the radio device, take the default options from the pps
* command. This is for legacy purposes.
*/
if (time_pps_create(up->fddev, &up->handle) < 0) {
msyslog(LOG_ERR,
"refclock_atom: time_pps_create failed: %m");
return (0);
}
return (atom_ppsapi(peer, pps_assert, pps_hardpps));
#else /* HAVE_PPSAPI */
return (1);
#endif /* HAVE_PPSAPI */
}
#ifdef HAVE_PPSAPI
/*
* atom_control - fudge control
*/
static void
atom_control(
int unit, /* unit (not used */
struct refclockstat *in, /* input parameters (not uded) */
struct refclockstat *out, /* output parameters (not used) */
struct peer *peer /* peer structure pointer */
)
{
struct refclockproc *pp;
pp = peer->procptr;
atom_ppsapi(peer, pp->sloppyclockflag & CLK_FLAG2,
pp->sloppyclockflag & CLK_FLAG3);
}
/*
* Initialize PPSAPI
*/
int
atom_ppsapi(
struct peer *peer, /* peer structure pointer */
int enb_clear, /* clear enable */
int enb_hardpps /* hardpps enable */
)
{
struct refclockproc *pp;
register struct ppsunit *up;
int capability;
pp = peer->procptr;
up = (struct ppsunit *)pp->unitptr;
if (time_pps_getcap(up->handle, &capability) < 0) {
msyslog(LOG_ERR,
"refclock_atom: time_pps_getcap failed: %m");
return (0);
}
memset(&up->pps_params, 0, sizeof(pps_params_t));
if (enb_clear)
up->pps_params.mode = capability & PPS_CAPTURECLEAR;
else
up->pps_params.mode = capability & PPS_CAPTUREASSERT;
if (!up->pps_params.mode) {
msyslog(LOG_ERR,
"refclock_atom: invalid capture edge %d",
pps_assert);
return (0);
}
up->pps_params.mode |= PPS_TSFMT_TSPEC;
if (time_pps_setparams(up->handle, &up->pps_params) < 0) {
msyslog(LOG_ERR,
"refclock_atom: time_pps_setparams failed: %m");
return (0);
}
if (enb_hardpps) {
if (time_pps_kcbind(up->handle, PPS_KC_HARDPPS,
up->pps_params.mode & ~PPS_TSFMT_TSPEC,
PPS_TSFMT_TSPEC) < 0) {
msyslog(LOG_ERR,
"refclock_atom: time_pps_kcbind failed: %m");
return (0);
}
pps_enable = 1;
}
#if DEBUG
if (debug) {
time_pps_getparams(up->handle, &up->pps_params);
printf(
"refclock_ppsapi: fd %d capability 0x%x version %d mode 0x%x kern %d\n",
up->fddev, capability, up->pps_params.api_version,
up->pps_params.mode, enb_hardpps);
}
#endif
return (1);
}
/*
* atom_shutdown - shut down the clock
*/
static void
atom_shutdown(
int unit, /* unit number (not used) */
struct peer *peer /* peer structure pointer */
)
{
struct refclockproc *pp;
register struct ppsunit *up;
pp = peer->procptr;
up = (struct ppsunit *)pp->unitptr;
if (up->fddev > 0)
close(up->fddev);
if (up->handle != 0)
time_pps_destroy(up->handle);
if (pps_peer == peer)
pps_peer = 0;
free(up);
}
/*
* atom_pps - receive data from the PPSAPI interface
*
* This routine is called once per second when the PPSAPI interface is
* present. It snatches the PPS timestamp from the kernel and saves the
* sign-extended fraction in a circular buffer for processing at the
* next poll event.
*/
static int
atom_pps(
struct peer *peer /* peer structure pointer */
)
{
register struct ppsunit *up;
struct refclockproc *pp;
pps_info_t pps_info;
struct timespec timeout, ts;
double dtemp;
/*
* Convert the timespec nanoseconds field to signed double and
* save in the median filter. for billboards. No harm is done if
* previous data are overwritten. If the discipline comes bum or
* the data grow stale, just forget it. A range gate rejects new
* samples if less than a jiggle time from the next second.
*/
pp = peer->procptr;
up = (struct ppsunit *)pp->unitptr;
if (up->handle == 0)
return (-1);
timeout.tv_sec = 0;
timeout.tv_nsec = 0;
memcpy(&pps_info, &up->pps_info, sizeof(pps_info_t));
if (time_pps_fetch(up->handle, PPS_TSFMT_TSPEC, &up->pps_info,
&timeout) < 0)
return (-1);
if (up->pps_params.mode & PPS_CAPTUREASSERT) {
if (pps_info.assert_sequence ==
up->pps_info.assert_sequence)
return (1);
ts = up->pps_info.assert_timestamp;
} else if (up->pps_params.mode & PPS_CAPTURECLEAR) {
if (pps_info.clear_sequence ==
up->pps_info.clear_sequence)
return (1);
ts = up->pps_info.clear_timestamp;
} else {
return (-1);
}
if (!((ts.tv_sec == up->ts.tv_sec && ts.tv_nsec -
up->ts.tv_nsec > NANOSECOND - RANGEGATE) ||
(ts.tv_sec - up->ts.tv_sec == 1 && ts.tv_nsec -
up->ts.tv_nsec < RANGEGATE))) {
up->ts = ts;
return (1);
}
up->ts = ts;
pp->lastrec.l_ui = ts.tv_sec + JAN_1970;
dtemp = ts.tv_nsec * FRAC / 1e9;
if (dtemp >= FRAC)
pp->lastrec.l_ui++;
pp->lastrec.l_uf = (u_int32)dtemp;
if (ts.tv_nsec > NANOSECOND / 2)
ts.tv_nsec -= NANOSECOND;
dtemp = -(double)ts.tv_nsec / NANOSECOND;
SAMPLE(dtemp + pp->fudgetime1);
#ifdef DEBUG
if (debug > 1)
printf("atom_pps %f %f\n", dtemp, pp->fudgetime1);
#endif
return (0);
}
#endif /* HAVE_PPSAPI */
/*
* pps_sample - receive PPS data from some other clock driver
*
* This routine is called once per second when the external clock driver
* processes PPS information. It processes the PPS timestamp and saves
* the sign-extended fraction in a circular buffer for processing at the
* next poll event. This works only for a single PPS device.
*/
int
pps_sample(
l_fp *offset /* PPS offset */
)
{
register struct peer *peer;
struct refclockproc *pp;
l_fp lftmp;
double doffset;
peer = pps_peer;
if (peer == 0) /* nobody home */
return (1);
pp = peer->procptr;
/*
* Convert the timeval to l_fp and save for billboards. Sign-
* extend the fraction and stash in the buffer. No harm is done
* if previous data are overwritten. If the discipline comes bum
* or the data grow stale, just forget it.
*/
pp->lastrec = *offset;
L_CLR(&lftmp);
L_ADDF(&lftmp, pp->lastrec.l_f);
LFPTOD(&lftmp, doffset);
SAMPLE(-doffset + pp->fudgetime1);
return (0);
}
/*
* atom_poll - called by the transmit procedure
*
* This routine is called once per second when in burst mode to save PPS
* sample offsets in the median filter. At the end of the burst period
* the samples are processed as a heap and the clock filter updated.
*/
static void
atom_poll(
int unit, /* unit number (not used) */
struct peer *peer /* peer structure pointer */
)
{
struct refclockproc *pp;
#ifdef HAVE_PPSAPI
int err;
#endif /* HAVE_PPSAPI */
/*
* Accumulate samples in the median filter. If a noise sample,
* return with no prejudice; if a protocol error, get mean;
* otherwise, cool. At the end of each poll interval, do a
* little bookeeping and process the surviving samples.
*/
pp = peer->procptr;
pp->polls++;
#ifdef HAVE_PPSAPI
err = atom_pps(peer);
if (err < 0) {
refclock_report(peer, CEVNT_FAULT);
return;
}
#endif /* HAVE_PPSAPI */
/*
* Valid time is returned only if the prefer peer has survived
* the intersection algorithm and within clock_max of local time
* and not too long ago. This ensures the PPS time is within
* +-0.5 s of the local time and the seconds numbering is
* unambiguous. Note that the leap bits are set no-warning on
* the first valid update and the stratum is set at the prefer
* peer.
*/
if (peer->burst > 0)
return;
peer->stratum = STRATUM_UNSPEC;
if (pp->codeproc == pp->coderecv) {
refclock_report(peer, CEVNT_TIMEOUT);
peer->burst = ASTAGE;
return;
} else if (!sys_prefer) {
pp->codeproc = pp->coderecv;
peer->burst = ASTAGE;
return;
} else if (fabs(sys_prefer->offset) > clock_max) {
pp->codeproc = pp->coderecv;
peer->burst = ASTAGE;
return;
}
peer->stratum = sys_prefer->stratum;
if (peer->stratum <= 1)
peer->refid = pp->refid;
else
peer->refid = peer->srcadr.sin_addr.s_addr;
pp->leap = LEAP_NOWARNING;
refclock_receive(peer);
peer->burst = ASTAGE;
}
#else
int refclock_atom_bs;
int
pps_sample(
l_fp *offset /* PPS offset */
)
{
return 1;
}
#endif /* REFCLOCK */