338 lines
8.2 KiB
C
338 lines
8.2 KiB
C
/*
|
|
* Device driver for Specialix range (SI/XIO) of serial line multiplexors.
|
|
*
|
|
* Copyright (C) 2000, Peter Wemm <peter@netplex.com.au>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notices, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notices, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
|
* NO EVENT SHALL THE AUTHORS BE LIABLE.
|
|
*
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_debug_si.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/si/sireg.h>
|
|
#include <dev/si/sivar.h>
|
|
|
|
#include <isa/isavar.h>
|
|
|
|
/* Look for a valid board at the given mem addr */
|
|
static int
|
|
si_isa_probe(device_t dev)
|
|
{
|
|
struct si_softc *sc;
|
|
int type;
|
|
u_int i, ramsize;
|
|
volatile unsigned char was, *ux;
|
|
volatile unsigned char *maddr;
|
|
unsigned char *paddr;
|
|
int unit;
|
|
|
|
/* No pnp support */
|
|
if (isa_get_vendorid(dev))
|
|
return (ENXIO);
|
|
|
|
sc = device_get_softc(dev);
|
|
unit = device_get_unit(dev);
|
|
|
|
sc->sc_mem_rid = 0;
|
|
sc->sc_mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
|
|
&sc->sc_mem_rid,
|
|
0, ~0, SIPROBEALLOC, RF_ACTIVE);
|
|
if (!sc->sc_mem_res) {
|
|
device_printf(dev, "cannot allocate memory resource\n");
|
|
return ENXIO;
|
|
}
|
|
paddr = (caddr_t)rman_get_start(sc->sc_mem_res);/* physical */
|
|
maddr = rman_get_virtual(sc->sc_mem_res); /* in kvm */
|
|
|
|
DPRINT((0, DBG_AUTOBOOT, "si%d: probe at virtual=0x%x physical=0x%x\n",
|
|
unit, maddr, paddr));
|
|
|
|
/*
|
|
* this is a lie, but it's easier than trying to handle caching
|
|
* and ram conflicts in the >1M and <16M region.
|
|
*/
|
|
if ((caddr_t)paddr < (caddr_t)0xA0000 ||
|
|
(caddr_t)paddr >= (caddr_t)0x100000) {
|
|
device_printf(dev, "maddr (%p) out of range\n", paddr);
|
|
goto fail;
|
|
}
|
|
|
|
if (((uintptr_t)paddr & 0x7fff) != 0) {
|
|
device_printf(dev, "maddr (%p) not on 32k boundary\n", paddr);
|
|
goto fail;
|
|
}
|
|
|
|
/* Is there anything out there? (0x17 is just an arbitrary number) */
|
|
*maddr = 0x17;
|
|
if (*maddr != 0x17) {
|
|
device_printf(dev, "0x17 check fail at phys %p\n", paddr);
|
|
goto fail;
|
|
}
|
|
/*
|
|
* Let's look first for a JET ISA card, since that's pretty easy
|
|
*
|
|
* All jet hosts are supposed to have this string in the IDROM,
|
|
* but it's not worth checking on self-IDing busses like PCI.
|
|
*/
|
|
{
|
|
unsigned char *jet_chk_str = "JET HOST BY KEV#";
|
|
|
|
for (i = 0; i < strlen(jet_chk_str); i++)
|
|
if (jet_chk_str[i] != *(maddr + SIJETIDSTR + 2 * i))
|
|
goto try_mk2;
|
|
}
|
|
DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: JET first check - 0x%x\n",
|
|
unit, (*(maddr+SIJETIDBASE))));
|
|
if (*(maddr+SIJETIDBASE) != (SISPLXID&0xff))
|
|
goto try_mk2;
|
|
DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: JET second check - 0x%x\n",
|
|
unit, (*(maddr+SIJETIDBASE+2))));
|
|
if (*(maddr+SIJETIDBASE+2) != ((SISPLXID&0xff00)>>8))
|
|
goto try_mk2;
|
|
/* It must be a Jet ISA or RIO card */
|
|
DPRINT((0, DBG_AUTOBOOT|DBG_FAIL, "si%d: JET id check - 0x%x\n",
|
|
unit, (*(maddr+SIUNIQID))));
|
|
if ((*(maddr+SIUNIQID) & 0xf0) != 0x20)
|
|
goto try_mk2;
|
|
/* It must be a Jet ISA SI/XIO card */
|
|
*(maddr + SIJETCONFIG) = 0;
|
|
type = SIJETISA;
|
|
ramsize = SIJET_RAMSIZE;
|
|
goto got_card;
|
|
|
|
try_mk2:
|
|
/*
|
|
* OK, now to see if whatever responded is really an SI card.
|
|
* Try for a MK II next (SIHOST2)
|
|
*/
|
|
for (i = SIPLSIG; i < SIPLSIG + 8; i++)
|
|
if ((*(maddr+i) & 7) != (~(unsigned char)i & 7))
|
|
goto try_mk1;
|
|
|
|
/* It must be an SIHOST2 */
|
|
*(maddr + SIPLRESET) = 0;
|
|
*(maddr + SIPLIRQCLR) = 0;
|
|
*(maddr + SIPLIRQSET) = 0x10;
|
|
type = SIHOST2;
|
|
ramsize = SIHOST2_RAMSIZE;
|
|
goto got_card;
|
|
|
|
try_mk1:
|
|
/*
|
|
* Its not a MK II, so try for a MK I (SIHOST)
|
|
*/
|
|
*(maddr+SIRESET) = 0x0; /* reset the card */
|
|
*(maddr+SIINTCL) = 0x0; /* clear int */
|
|
*(maddr+SIRAM) = 0x17;
|
|
if (*(maddr+SIRAM) != (unsigned char)0x17)
|
|
goto fail;
|
|
*(maddr+0x7ff8) = 0x17;
|
|
if (*(maddr+0x7ff8) != (unsigned char)0x17) {
|
|
device_printf(dev, "0x17 check fail at phys %p = 0x%x\n",
|
|
paddr+0x77f8, *(maddr+0x77f8));
|
|
goto fail;
|
|
}
|
|
|
|
/* It must be an SIHOST (maybe?) - there must be a better way XXX */
|
|
type = SIHOST;
|
|
ramsize = SIHOST_RAMSIZE;
|
|
|
|
got_card:
|
|
DPRINT((0, DBG_AUTOBOOT, "si%d: found type %d card, try memory test\n",
|
|
unit, type));
|
|
/* Try the acid test */
|
|
ux = maddr + SIRAM;
|
|
for (i = 0; i < ramsize; i++, ux++)
|
|
*ux = (unsigned char)(i&0xff);
|
|
ux = maddr + SIRAM;
|
|
for (i = 0; i < ramsize; i++, ux++) {
|
|
if ((was = *ux) != (unsigned char)(i&0xff)) {
|
|
device_printf(dev,
|
|
"memtest fail at phys %p, was %x should be %x\n",
|
|
paddr + i, was, i & 0xff);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* clear out the RAM */
|
|
ux = maddr + SIRAM;
|
|
for (i = 0; i < ramsize; i++)
|
|
*ux++ = 0;
|
|
ux = maddr + SIRAM;
|
|
for (i = 0; i < ramsize; i++) {
|
|
if ((was = *ux++) != 0) {
|
|
device_printf(dev, "clear fail at phys %p, was %x\n",
|
|
paddr + i, was);
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Success, we've found a valid board, now fill in
|
|
* the adapter structure.
|
|
*/
|
|
switch (type) {
|
|
case SIHOST2:
|
|
switch (isa_get_irq(dev)) {
|
|
case 11:
|
|
case 12:
|
|
case 15:
|
|
break;
|
|
default:
|
|
device_printf(dev,
|
|
"bad IRQ value - %d (11, 12, 15 allowed)\n",
|
|
isa_get_irq(dev));
|
|
goto fail;
|
|
}
|
|
sc->sc_memsize = SIHOST2_MEMSIZE;
|
|
break;
|
|
case SIHOST:
|
|
switch (isa_get_irq(dev)) {
|
|
case 11:
|
|
case 12:
|
|
case 15:
|
|
break;
|
|
default:
|
|
device_printf(dev,
|
|
"bad IRQ value - %d (11, 12, 15 allowed)\n",
|
|
isa_get_irq(dev));
|
|
goto fail;
|
|
}
|
|
sc->sc_memsize = SIHOST_MEMSIZE;
|
|
break;
|
|
case SIJETISA:
|
|
switch (isa_get_irq(dev)) {
|
|
case 9:
|
|
case 10:
|
|
case 11:
|
|
case 12:
|
|
case 15:
|
|
break;
|
|
default:
|
|
device_printf(dev,
|
|
"bad IRQ value - %d (9, 10, 11, 12, 15 allowed)\n",
|
|
isa_get_irq(dev));
|
|
goto fail;
|
|
}
|
|
sc->sc_memsize = SIJETISA_MEMSIZE;
|
|
break;
|
|
case SIMCA: /* MCA */
|
|
default:
|
|
device_printf(dev, "card type %d not supported\n", type);
|
|
goto fail;
|
|
}
|
|
sc->sc_type = type;
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
sc->sc_mem_rid, sc->sc_mem_res);
|
|
sc->sc_mem_res = 0;
|
|
return (0); /* success! */
|
|
|
|
fail:
|
|
if (sc->sc_mem_res) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
sc->sc_mem_rid, sc->sc_mem_res);
|
|
sc->sc_mem_res = 0;
|
|
}
|
|
return(EINVAL);
|
|
}
|
|
|
|
static int
|
|
si_isa_attach(device_t dev)
|
|
{
|
|
int error;
|
|
void *ih;
|
|
struct si_softc *sc;
|
|
|
|
error = 0;
|
|
ih = NULL;
|
|
sc = device_get_softc(dev);
|
|
|
|
sc->sc_mem_rid = 0;
|
|
sc->sc_mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&sc->sc_mem_rid,
|
|
RF_ACTIVE);
|
|
if (!sc->sc_mem_res) {
|
|
device_printf(dev, "couldn't map memory\n");
|
|
goto fail;
|
|
}
|
|
sc->sc_paddr = (caddr_t)rman_get_start(sc->sc_mem_res);
|
|
sc->sc_maddr = rman_get_virtual(sc->sc_mem_res);
|
|
|
|
sc->sc_irq_rid = 0;
|
|
sc->sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->sc_irq_rid,
|
|
RF_ACTIVE | RF_SHAREABLE);
|
|
if (!sc->sc_irq_res) {
|
|
device_printf(dev, "couldn't allocate interrupt\n");
|
|
goto fail;
|
|
}
|
|
sc->sc_irq = rman_get_start(sc->sc_irq_res);
|
|
error = bus_setup_intr(dev, sc->sc_irq_res, INTR_TYPE_TTY,
|
|
si_intr, sc,&ih);
|
|
if (error) {
|
|
device_printf(dev, "couldn't activate interrupt\n");
|
|
goto fail;
|
|
}
|
|
|
|
error = siattach(dev);
|
|
if (error)
|
|
goto fail;
|
|
return (0); /* success */
|
|
|
|
fail:
|
|
if (error == 0)
|
|
error = ENXIO;
|
|
if (sc->sc_irq_res) {
|
|
if (ih)
|
|
bus_teardown_intr(dev, sc->sc_irq_res, ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ,
|
|
sc->sc_irq_rid, sc->sc_irq_res);
|
|
sc->sc_irq_res = 0;
|
|
}
|
|
if (sc->sc_mem_res) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
sc->sc_mem_rid, sc->sc_mem_res);
|
|
sc->sc_mem_res = 0;
|
|
}
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t si_isa_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, si_isa_probe),
|
|
DEVMETHOD(device_attach, si_isa_attach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t si_isa_driver = {
|
|
"si",
|
|
si_isa_methods,
|
|
sizeof(struct si_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(si, isa, si_isa_driver, si_devclass, 0, 0);
|