freebsd-dev/sys/arm/conf/IMX6
2015-05-10 12:13:27 +00:00

141 lines
4.5 KiB
Plaintext

#
# Kernel configuration for Freescale i.MX6 systems.
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$
ident IMX6
include "std.armv6"
include "../freescale/imx/std.imx6"
options SOC_IMX6
options HZ=500 # Scheduling quantum is 2 milliseconds.
options SCHED_ULE # ULE scheduler
#options NFSD # Network Filesystem Server
options INCLUDE_CONFIG_FILE # Include this file in kernel
options PLATFORM
options SMP # Enable multiple cores
# Debugging for use in -current
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options KDB # Enable kernel debugger support
# For minimum debugger support (stable branch) use:
#options KDB_TRACE # Print a stack trace for a panic
# For full debugger support use this instead:
options DDB # Enable the kernel debugger
#options GDB # Support remote GDB.
# Other debugging options...
options ALT_BREAK_TO_DEBUGGER # Use <CR><tilde><ctrl-b> to enter debugger.
#options DEADLKRES # Enable the deadlock resolver
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
#options DIAGNOSTIC
# NFS root from boopt/dhcp
#options BOOTP
#options BOOTP_NFSROOT
#options BOOTP_COMPAT
#options BOOTP_NFSV3
#options BOOTP_WIRED_TO=ffec0
# U-Boot stuff lives on slice 1, FreeBSD on slice 2.
options ROOTDEVNAME=\"ufs:mmcsd0s2a\"
# Interrupt controller
device gic
# Pseudo devices.
device loop # Network loopback
device random # Entropy device
device vlan # 802.1Q VLAN support
device tun # Packet tunnel.
device md # Memory "disks"
#device gif # IPv6 and IPv4 tunneling
#device firmware # firmware assist module
device ether # Ethernet support
device miibus # Required for ethernet
device bpf # Berkeley packet filter (required for DHCP)
# General-purpose input/output
device gpio
# Serial (COM) ports
device uart # Multi-uart driver
# SDCard
device sdhci # SD controller
device mmc # SD/MMC protocol
device mmcsd # SDCard disk device
# SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
device da # Direct Access (disks)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
# USB support
#options USB_DEBUG # enable debug msgs
device ehci # OHCI USB interface
device usb # USB Bus (required)
device umass # Disks/Mass storage - Requires scbus and da
device uhid # "Human Interface Devices"
device u3g # USB modems
#device ukbd # Allow keyboard like HIDs to control console
#device ums # USB mouse
# USB Ethernet, requires miibus
#device aue # ADMtek USB Ethernet
#device axe # ASIX Electronics USB Ethernet
#device cdce # Generic USB over Ethernet
#device cue # CATC USB Ethernet
#device kue # Kawasaki LSI USB Ethernet
#device rue # RealTek RTL8150 USB Ethernet
#device udav # Davicom DM9601E USB
# USB Wireless
#device rum # Ralink Technology RT2501USB wireless NICs
# Wireless NIC cards
#device wlan # 802.11 support
#device wlan_wep # 802.11 WEP support
#device wlan_ccmp # 802.11 CCMP support
#device wlan_tkip # 802.11 TKIP support
#device wlan_amrr # AMRR transmit rate control algorithm
# NOTE: serial console will be disabled if syscons enabled
# Uncomment following lines for framebuffer/syscons support
# Wandboard has no video console support yet.
#device sc
#device kbdmux
#options SC_DFLT_FONT # compile font in
#makeoptions SC_DFLT_FONT=cp437
# Flattened Device Tree
options FDT # Configure using FDT/DTB data
makeoptions MODULES_EXTRA=dtb/imx6
# SoC-specific devices
device ffec # Freescale Fast Ethernet Controller
device fsliic # Freescale i2c/iic
device iic # iic protocol
device iicbus # iic bus
#device imxwdt # Watchdog. WARNING: can't be disabled!!!