Some notable changes, from upstream's release notes:
- sshd(8): Remove support for obsolete "host/port" syntax.
- ssh(1): When prompting whether to record a new host key, accept the key
fingerprint as a synonym for "yes".
- ssh-keygen(1): when acting as a CA and signing certificates with an RSA
key, default to using the rsa-sha2-512 signature algorithm.
- ssh(1), sshd(8), ssh-keygen(1): this release removes the "ssh-rsa"
(RSA/SHA1) algorithm from those accepted for certificate signatures.
- ssh-sk-helper(8): this is a new binary. It is used by the FIDO/U2F
support to provide address-space isolation for token middleware
libraries (including the internal one).
- ssh(1): this release enables UpdateHostkeys by default subject to some
conservative preconditions.
- scp(1): this release changes the behaviour of remote to remote copies
(e.g. "scp host-a:/path host-b:") to transfer through the local host
by default.
- scp(1): experimental support for transfers using the SFTP protocol as
a replacement for the venerable SCP/RCP protocol that it has
traditionally used.
Additional integration work is needed to support FIDO/U2F in the base
system.
Deprecation Notice
------------------
OpenSSH will disable the ssh-rsa signature scheme by default in the
next release.
Reviewed by: imp
MFC after: 1 month
Relnotes: Yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29985
Overview.
$ ./configure && make tests
You'll see some progress info. A failure will cause either the make to
abort or the driver script to report a "FATAL" failure.
The test consists of 2 parts. The first is the file-based tests which is
driven by the Makefile, and the second is a set of network or proxycommand
based tests, which are driven by a driver script (test-exec.sh) which is
called multiple times by the Makefile.
Failures in the first part will cause the Makefile to return an error.
Failures in the second part will print a "FATAL" message for the failed
test and continue.
OpenBSD has a system-wide regression test suite. OpenSSH Portable's test
suite is based on OpenBSD's with modifications.
Environment variables.
SKIP_UNIT: Skip unit tests.
SUDO: path to sudo/doas command, if desired. Note that some systems
(notably systems using PAM) require sudo to execute some tests.
LTESTS: Whitespace separated list of tests (filenames without the .sh
extension) to run.
SKIP_LTESTS: Whitespace separated list of tests to skip.
OBJ: used by test scripts to access build dir.
TEST_SHELL: shell used for running the test scripts.
TEST_SSH_FAIL_FATAL: set to "yes" to make any failure abort the test
currently in progress.
TEST_SSH_PORT: TCP port to be used for the listening tests.
TEST_SSH_QUIET: set to "yes" to suppress non-fatal output.
TEST_SSH_SSHD_CONFOPTS: Configuration directives to be added to sshd_config
before running each test.
TEST_SSH_SSH_CONFOPTS: Configuration directives to be added to
ssh_config before running each test.
TEST_SSH_TRACE: set to "yes" for verbose output from tests
TEST_SSH_x: path to "ssh" command under test, where x is one of
SSH, SSHD, SSHAGENT, SSHADD, SSHKEYGEN, SSHKEYSCAN, SFTP or
SFTPSERVER
USE_VALGRIND: Run the tests under valgrind memory checker.
Individual tests.
You can run an individual test from the top-level Makefile, eg:
$ make tests LTESTS=agent-timeout
If you need to manipulate the environment more you can invoke test-exec.sh
directly if you set up the path to find the binaries under test and the
test scripts themselves, for example:
$ cd regress
$ PATH=`pwd`/..:$PATH:. TEST_SHELL=/bin/sh sh test-exec.sh `pwd` \
agent-timeout.sh
ok agent timeout test
Files.
test-exec.sh: the main test driver. Sets environment, creates config files
and keys and runs the specified test.
At the time of writing, the individual tests are:
connect.sh: simple connect
proxy-connect.sh: proxy connect
connect-privsep.sh: proxy connect with privsep
connect-uri.sh: uri connect
proto-version.sh: sshd version with different protocol combinations
proto-mismatch.sh: protocol version mismatch
exit-status.sh: remote exit status
envpass.sh: environment passing
transfer.sh: transfer data
banner.sh: banner
rekey.sh: rekey
stderr-data.sh: stderr data transfer
stderr-after-eof.sh: stderr data after eof
broken-pipe.sh: broken pipe test
try-ciphers.sh: try ciphers
yes-head.sh: yes pipe head
login-timeout.sh: connect after login grace timeout
agent.sh: simple connect via agent
agent-getpeereid.sh: disallow agent attach from other uid
agent-timeout.sh: agent timeout test
agent-ptrace.sh: disallow agent ptrace attach
keyscan.sh: keyscan
keygen-change.sh: change passphrase for key
keygen-convert.sh: convert keys
keygen-moduli.sh: keygen moduli
key-options.sh: key options
scp.sh: scp
scp-uri.sh: scp-uri
sftp.sh: basic sftp put/get
sftp-chroot.sh: sftp in chroot
sftp-cmds.sh: sftp command
sftp-badcmds.sh: sftp invalid commands
sftp-batch.sh: sftp batchfile
sftp-glob.sh: sftp glob
sftp-perm.sh: sftp permissions
sftp-uri.sh: sftp-uri
ssh-com-client.sh: connect with ssh.com client
ssh-com-keygen.sh: ssh.com key import
ssh-com-sftp.sh: basic sftp put/get with ssh.com server
ssh-com.sh: connect to ssh.com server
reconfigure.sh: simple connect after reconfigure
dynamic-forward.sh: dynamic forwarding
forwarding.sh: local and remote forwarding
multiplex.sh: connection multiplexing
reexec.sh: reexec tests
brokenkeys.sh: broken keys
sshcfgparse.sh: ssh config parse
cfgparse.sh: sshd config parse
cfgmatch.sh: sshd_config match
cfgmatchlisten.sh: sshd_config matchlisten
addrmatch.sh: address match
localcommand.sh: localcommand
forcecommand.sh: forced command
portnum.sh: port number parsing
keytype.sh: login with different key types
kextype.sh: login with different key exchange algorithms
cert-hostkey.sh certified host keys
cert-userkey.sh: certified user keys
host-expand.sh: expand %h and %n
keys-command.sh: authorized keys from command
forward-control.sh: sshd control of local and remote forwarding
integrity.sh: integrity
krl.sh: key revocation lists
multipubkey.sh: multiple pubkey
limit-keytype.sh: restrict pubkey type
hostkey-agent.sh: hostkey agent
keygen-knownhosts.sh: ssh-keygen known_hosts
hostkey-rotate.sh: hostkey rotate
principals-command.sh: authorized principals command
cert-file.sh: ssh with certificates
cfginclude.sh: config include
allow-deny-users.sh: AllowUsers/DenyUsers
authinfo.sh: authinfo
Problems?
Run the failing test with shell tracing (-x) turned on:
$ PATH=`pwd`/..:$PATH:. sh -x test-exec.sh `pwd` agent-timeout.sh
Failed tests can be difficult to diagnose. Suggestions:
- run the individual test via ./test-exec.sh `pwd` [testname]
- set LogLevel to VERBOSE in test-exec.sh and enable syslogging of
auth.debug (eg to /var/log/authlog).
Known Issues.
- Similarly, if you do not have "scp" in your system's $PATH then the
multiplex scp tests will fail (since the system's shell startup scripts
will determine where the shell started by sshd will look for scp).
- Recent GNU coreutils deprecate "head -[n]": this will cause the yes-head
test to fail. The old behaviour can be restored by setting (and
exporting) _POSIX2_VERSION=199209 before running the tests.