freebsd-dev/sys/pc98/cbus/fdcreg.h
2000-01-09 10:01:21 +00:00

105 lines
4.2 KiB
C

/*-
* Copyright (c) 1991 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)fdreg.h 7.1 (Berkeley) 5/9/91
* $FreeBSD$
*/
/*
* AT floppy controller registers and bitfields
*/
/* uses NEC765 controller */
#include <isa/ic/nec765.h>
#ifdef PC98
/* registers */
#define FDSTS 0 /* NEC 765 Main Status Register (R) */
#define FDDATA 2 /* NEC 765 Data Register (R/W) */
#define FDOUT 4 /* Digital Output Register (W) */
#define FDO_RST 0x80 /* FDC RESET */
#define FDO_FRY 0x40 /* force READY */
#define FDO_AIE 0x20 /* Attention Interrupt Enable */
#define FDO_DD 0x20 /* FDD Mode Exchange 0:1M 1:640K */
#define FDO_DMAE 0x10 /* enable floppy DMA */
#define FDO_MTON 0x08 /* MOTOR ON (when EMTON=1)*/
#define FDO_TMSK 0x04 /* TIMER MASK */
#define FDO_TTRG 0x01 /* TIMER TRIGER */
#define FDIN 4 /* Digital Input Register (R) */
#define FDI_TYP0 0x04 /* FDD #1/#2 TYPE */
#define FDI_TYP1 0x08 /* FDD #3/#4 TYPE */
#define FDI_RDY 0x10 /* Ready */
#define FDI_DMACH 0x20 /* DMA Channel */
#define FDI_FINT0 0x40 /* Interrupt */
#define FDI_FINT1 0x80 /* Interrupt */
#define FDP_EMTON 0x04 /* enable MTON */
#define FDP_FDDEXC 0x02 /* FDD Mode Exchange 1:1M 0:640K */
#define FDP_PORTEXC 0x01 /* PORT Exchane 1:1M 0:640K */
#else
/* registers */
#define FDOUT 2 /* Digital Output Register (W) */
#define FDO_FDSEL 0x03 /* floppy device select */
#define FDO_FRST 0x04 /* floppy controller reset */
#define FDO_FDMAEN 0x08 /* enable floppy DMA and Interrupt */
#define FDO_MOEN0 0x10 /* motor enable drive 0 */
#define FDO_MOEN1 0x20 /* motor enable drive 1 */
#define FDO_MOEN2 0x40 /* motor enable drive 2 */
#define FDO_MOEN3 0x80 /* motor enable drive 3 */
#define FDSTS 4 /* NEC 765 Main Status Register (R) */
#define FDDATA 5 /* NEC 765 Data Register (R/W) */
#define FDCTL 7 /* Control Register (W) */
#ifndef FDC_500KBPS
# define FDC_500KBPS 0x00 /* 500KBPS MFM drive transfer rate */
# define FDC_300KBPS 0x01 /* 300KBPS MFM drive transfer rate */
# define FDC_250KBPS 0x02 /* 250KBPS MFM drive transfer rate */
# define FDC_125KBPS 0x03 /* 125KBPS FM drive transfer rate */
/* for some controllers 1MPBS instead */
#endif /* FDC_500KBPS */
#endif /* PC98 */
/*
* this is the secret PIO data port (offset from base)
*/
#define FDC_YE_DATAPORT 6
#ifndef PC98
#define FDIN 7 /* Digital Input Register (R) */
#define FDI_DCHG 0x80 /* diskette has been changed */
/* requires drive and motor being selected */
/* is cleared by any step pulse to drive */
#endif