freebsd-dev/sys/net80211/ieee80211_freebsd.h
Sam Leffler 3c419c1bb5 When dispatching frames saved on the power save queue to a
station exiting power save mode prepend them to the driver's
send q instead of appending them.  This insures the packets
are not misordered wrt any packets already q'd for the station.

This corrects a problem noticed when using a VoIP phone talking
to an ath card in ap mode; the misordered packets caused noise.

Submitted by:	"J.R. Oldroyd" <jr@opal.com>
MFC after:	2 weeks
2007-03-07 04:42:22 +00:00

282 lines
10 KiB
C

/*-
* Copyright (c) 2003-2005 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _NET80211_IEEE80211_FREEBSD_H_
#define _NET80211_IEEE80211_FREEBSD_H_
#ifdef _KERNEL
/*
* Beacon locking definitions.
*/
typedef struct mtx ieee80211_beacon_lock_t;
#define IEEE80211_BEACON_LOCK_INIT(_ic, _name) \
mtx_init(&(_ic)->ic_beaconlock, _name, "802.11 beacon lock", MTX_DEF)
#define IEEE80211_BEACON_LOCK_DESTROY(_ic) mtx_destroy(&(_ic)->ic_beaconlock)
#define IEEE80211_BEACON_LOCK(_ic) mtx_lock(&(_ic)->ic_beaconlock)
#define IEEE80211_BEACON_UNLOCK(_ic) mtx_unlock(&(_ic)->ic_beaconlock)
#define IEEE80211_BEACON_LOCK_ASSERT(_ic) \
mtx_assert(&(_ic)->ic_beaconlock, MA_OWNED)
/*
* Node locking definitions.
* NB: MTX_DUPOK is because we don't generate per-interface strings.
*/
typedef struct mtx ieee80211_node_lock_t;
#define IEEE80211_NODE_LOCK_INIT(_nt, _name) \
mtx_init(&(_nt)->nt_nodelock, _name, "802.11 node table", \
MTX_DEF | MTX_DUPOK)
#define IEEE80211_NODE_LOCK_DESTROY(_nt) mtx_destroy(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_LOCK(_nt) mtx_lock(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_IS_LOCKED(_nt) mtx_owned(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_UNLOCK(_nt) mtx_unlock(&(_nt)->nt_nodelock)
#define IEEE80211_NODE_LOCK_ASSERT(_nt) \
mtx_assert(&(_nt)->nt_nodelock, MA_OWNED)
/*
* Node table scangen locking definitions.
*/
typedef struct mtx ieee80211_scan_lock_t;
#define IEEE80211_SCAN_LOCK_INIT(_nt, _name) \
mtx_init(&(_nt)->nt_scanlock, _name, "802.11 scangen", MTX_DEF)
#define IEEE80211_SCAN_LOCK_DESTROY(_nt) mtx_destroy(&(_nt)->nt_scanlock)
#define IEEE80211_SCAN_LOCK(_nt) mtx_lock(&(_nt)->nt_scanlock)
#define IEEE80211_SCAN_UNLOCK(_nt) mtx_unlock(&(_nt)->nt_scanlock)
#define IEEE80211_SCAN_LOCK_ASSERT(_nt) \
mtx_assert(&(_nt)->nt_scanlock, MA_OWNED)
/*
* Per-node power-save queue definitions.
*/
#define IEEE80211_NODE_SAVEQ_INIT(_ni, _name) do { \
mtx_init(&(_ni)->ni_savedq.ifq_mtx, _name, "802.11 ps queue", MTX_DEF);\
(_ni)->ni_savedq.ifq_maxlen = IEEE80211_PS_MAX_QUEUE; \
} while (0)
#define IEEE80211_NODE_SAVEQ_DESTROY(_ni) \
mtx_destroy(&(_ni)->ni_savedq.ifq_mtx)
#define IEEE80211_NODE_SAVEQ_QLEN(_ni) \
_IF_QLEN(&(_ni)->ni_savedq)
#define IEEE80211_NODE_SAVEQ_LOCK(_ni) do { \
IF_LOCK(&(_ni)->ni_savedq); \
} while (0)
#define IEEE80211_NODE_SAVEQ_UNLOCK(_ni) do { \
IF_UNLOCK(&(_ni)->ni_savedq); \
} while (0)
#define IEEE80211_NODE_SAVEQ_DEQUEUE(_ni, _m, _qlen) do { \
IEEE80211_NODE_SAVEQ_LOCK(_ni); \
_IF_DEQUEUE(&(_ni)->ni_savedq, _m); \
(_qlen) = IEEE80211_NODE_SAVEQ_QLEN(_ni); \
IEEE80211_NODE_SAVEQ_UNLOCK(_ni); \
} while (0)
#define IEEE80211_NODE_SAVEQ_DRAIN(_ni, _qlen) do { \
IEEE80211_NODE_SAVEQ_LOCK(_ni); \
(_qlen) = IEEE80211_NODE_SAVEQ_QLEN(_ni); \
_IF_DRAIN(&(_ni)->ni_savedq); \
IEEE80211_NODE_SAVEQ_UNLOCK(_ni); \
} while (0)
/* XXX could be optimized */
#define _IEEE80211_NODE_SAVEQ_DEQUEUE_HEAD(_ni, _m) do { \
_IF_DEQUEUE(&(_ni)->ni_savedq, m); \
} while (0)
#define _IEEE80211_NODE_SAVEQ_ENQUEUE(_ni, _m, _qlen, _age) do {\
(_m)->m_nextpkt = NULL; \
if ((_ni)->ni_savedq.ifq_tail != NULL) { \
_age -= M_AGE_GET((_ni)->ni_savedq.ifq_tail); \
(_ni)->ni_savedq.ifq_tail->m_nextpkt = (_m); \
} else { \
(_ni)->ni_savedq.ifq_head = (_m); \
} \
M_AGE_SET(_m, _age); \
(_ni)->ni_savedq.ifq_tail = (_m); \
(_qlen) = ++(_ni)->ni_savedq.ifq_len; \
} while (0)
#ifndef IF_PREPEND_LIST
#define _IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
(mtail)->m_nextpkt = (ifq)->ifq_head; \
if ((ifq)->ifq_tail == NULL) \
(ifq)->ifq_tail = (mtail); \
(ifq)->ifq_head = (mhead); \
(ifq)->ifq_len += (mcount); \
} while (0)
#define IF_PREPEND_LIST(ifq, mhead, mtail, mcount) do { \
IF_LOCK(ifq); \
_IF_PREPEND_LIST(ifq, mhead, mtail, mcount); \
IF_UNLOCK(ifq); \
} while (0)
#endif /* IF_PREPEND_LIST */
/*
* 802.1x MAC ACL database locking definitions.
*/
typedef struct mtx acl_lock_t;
#define ACL_LOCK_INIT(_as, _name) \
mtx_init(&(_as)->as_lock, _name, "802.11 ACL", MTX_DEF)
#define ACL_LOCK_DESTROY(_as) mtx_destroy(&(_as)->as_lock)
#define ACL_LOCK(_as) mtx_lock(&(_as)->as_lock)
#define ACL_UNLOCK(_as) mtx_unlock(&(_as)->as_lock)
#define ACL_LOCK_ASSERT(_as) \
mtx_assert((&(_as)->as_lock), MA_OWNED)
/*
* Node reference counting definitions.
*
* ieee80211_node_initref initialize the reference count to 1
* ieee80211_node_incref add a reference
* ieee80211_node_decref remove a reference
* ieee80211_node_dectestref remove a reference and return 1 if this
* is the last reference, otherwise 0
* ieee80211_node_refcnt reference count for printing (only)
*/
#include <machine/atomic.h>
#define ieee80211_node_initref(_ni) \
do { ((_ni)->ni_refcnt = 1); } while (0)
#define ieee80211_node_incref(_ni) \
atomic_add_int(&(_ni)->ni_refcnt, 1)
#define ieee80211_node_decref(_ni) \
atomic_subtract_int(&(_ni)->ni_refcnt, 1)
struct ieee80211_node;
int ieee80211_node_dectestref(struct ieee80211_node *ni);
#define ieee80211_node_refcnt(_ni) (_ni)->ni_refcnt
struct ifqueue;
void ieee80211_drain_ifq(struct ifqueue *);
struct mbuf *ieee80211_getmgtframe(u_int8_t **frm, u_int pktlen);
#define M_LINK0 M_PROTO1 /* WEP requested */
#define M_PWR_SAV M_PROTO4 /* bypass PS handling */
#define M_MORE_DATA M_PROTO5 /* more data frames to follow */
/*
* Encode WME access control bits in the PROTO flags.
* This is safe since it's passed directly in to the
* driver and there's no chance someone else will clobber
* them on us.
*/
#define M_WME_AC_MASK (M_PROTO2|M_PROTO3)
/* XXX 5 is wrong if M_PROTO* are redefined */
#define M_WME_AC_SHIFT 5
#define M_WME_SETAC(m, ac) \
((m)->m_flags = ((m)->m_flags &~ M_WME_AC_MASK) | \
((ac) << M_WME_AC_SHIFT))
#define M_WME_GETAC(m) (((m)->m_flags >> M_WME_AC_SHIFT) & 0x3)
/*
* Mbufs on the power save queue are tagged with an age and
* timed out. We reuse the hardware checksum field in the
* mbuf packet header to store this data.
*/
#define M_AGE_SET(m,v) (m->m_pkthdr.csum_data = v)
#define M_AGE_GET(m) (m->m_pkthdr.csum_data)
#define M_AGE_SUB(m,adj) (m->m_pkthdr.csum_data -= adj)
void get_random_bytes(void *, size_t);
struct ieee80211com;
void ieee80211_sysctl_attach(struct ieee80211com *);
void ieee80211_sysctl_detach(struct ieee80211com *);
void ieee80211_load_module(const char *);
#endif /* _KERNEL */
/* XXX this stuff belongs elsewhere */
/*
* Message formats for messages from the net80211 layer to user
* applications via the routing socket. These messages are appended
* to an if_announcemsghdr structure.
*/
struct ieee80211_join_event {
uint8_t iev_addr[6];
};
struct ieee80211_leave_event {
uint8_t iev_addr[6];
};
struct ieee80211_replay_event {
uint8_t iev_src[6]; /* src MAC */
uint8_t iev_dst[6]; /* dst MAC */
uint8_t iev_cipher; /* cipher type */
uint8_t iev_keyix; /* key id/index */
uint64_t iev_keyrsc; /* RSC from key */
uint64_t iev_rsc; /* RSC from frame */
};
struct ieee80211_michael_event {
uint8_t iev_src[6]; /* src MAC */
uint8_t iev_dst[6]; /* dst MAC */
uint8_t iev_cipher; /* cipher type */
uint8_t iev_keyix; /* key id/index */
};
#define RTM_IEEE80211_ASSOC 100 /* station associate (bss mode) */
#define RTM_IEEE80211_REASSOC 101 /* station re-associate (bss mode) */
#define RTM_IEEE80211_DISASSOC 102 /* station disassociate (bss mode) */
#define RTM_IEEE80211_JOIN 103 /* station join (ap mode) */
#define RTM_IEEE80211_LEAVE 104 /* station leave (ap mode) */
#define RTM_IEEE80211_SCAN 105 /* scan complete, results available */
#define RTM_IEEE80211_REPLAY 106 /* sequence counter replay detected */
#define RTM_IEEE80211_MICHAEL 107 /* Michael MIC failure detected */
#define RTM_IEEE80211_REJOIN 108 /* station re-associate (ap mode) */
/*
* Structure prepended to raw packets sent through the bpf
* interface when set to DLT_IEEE802_11_RADIO. This allows
* user applications to specify pretty much everything in
* an Atheros tx descriptor. XXX need to generalize.
*
* XXX cannot be more than 14 bytes as it is copied to a sockaddr's
* XXX sa_data area.
*/
struct ieee80211_bpf_params {
uint8_t ibp_vers; /* version */
#define IEEE80211_BPF_VERSION 0
uint8_t ibp_len; /* header length in bytes */
uint8_t ibp_flags;
#define IEEE80211_BPF_SHORTPRE 0x01 /* tx with short preamble */
#define IEEE80211_BPF_NOACK 0x02 /* tx with no ack */
#define IEEE80211_BPF_CRYPTO 0x04 /* tx with h/w encryption */
#define IEEE80211_BPF_FCS 0x10 /* frame incldues FCS */
#define IEEE80211_BPF_DATAPAD 0x20 /* frame includes data padding */
#define IEEE80211_BPF_RTS 0x40 /* tx with RTS/CTS */
#define IEEE80211_BPF_CTS 0x80 /* tx with CTS only */
uint8_t ibp_pri; /* WME/WMM AC+tx antenna */
uint8_t ibp_try0; /* series 1 try count */
uint8_t ibp_rate0; /* series 1 IEEE tx rate */
uint8_t ibp_power; /* tx power (device units) */
uint8_t ibp_ctsrate; /* IEEE tx rate for CTS */
uint8_t ibp_try1; /* series 2 try count */
uint8_t ibp_rate1; /* series 2 IEEE tx rate */
uint8_t ibp_try2; /* series 3 try count */
uint8_t ibp_rate2; /* series 3 IEEE tx rate */
uint8_t ibp_try3; /* series 4 try count */
uint8_t ibp_rate3; /* series 4 IEEE tx rate */
};
#endif /* _NET80211_IEEE80211_FREEBSD_H_ */