d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8a4f65bc33
freebsd-dev/sys/dev/mps/mpi/mpi2_init.h
Kenneth D. Merry be4aa869c1 Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version 
14.00.00.01-fbsd.

Their description of the changes is as follows:

1.	Copyright contents has been changed in all respective .c
	and .h files

2.	Support for WRITE12 and READ12 for direct-io (warpdrive only)
	has been added.

3.      Driver has added checks to see if Drive has READ_CAP_16
	support before sending it down to the device.
	If SPC3_SID_PROTECT flag is set in the inquiry data, the
	device supports protection information, and must support
	the 16 byte read capacity command, otherwise continue without
	sending read cap 16. This will optimize driver performance,
	since it will not send READ_CAP_16 to the drive which does
	not have support of READ_CAP_16.

4.      With new approach, "MPTIOCTL_RESET_ADAPTER" IOCTL will not
	use DELAY() which is busy loop implementation.
	It will use <msleep> (Better way to sleep without busy
	loop). Also from the HBA reset code path and some other
	places, DELAY() is replaced with msleep() or "pause()",
	which is based on sleep/wakeup style calls.  Driver use
	msleep()/pause() instead of DELAY based on CAN_SLEEP/NO_SLEEP
	flags to avoid busy loop which is not required all the
	time.e.a

	a. While driver is getting loaded, driver calls most of the
	   commands with NO_SLEEP.
	b. When Driver is functional and it needs Reinit of HBA,
	   CAN_SLEEP flag is used.

5.	<mpslsi> driver is not Endian safe. It will not work on Big
	Endian machines	like Sparc and PowerPC platforms because it
	assumes it is running on a Little Endian machine.

	Driver code is modified such way that it does not assume CPU
	arch is Little Endian.
	a. All places where Driver interacts from HBA to Host, it
	   converts Little Endian format to CPU format.
	b. All places where Driver interacts from Host to HBA, it
	   converts CPU format to Little Endian.

6.	Findout memory leaks in FreeBSD Driver and resolve those,
	such as memory leak in targ's luns creation/deletion.
	Also added additional checks to see memory allocation
	success/fail.

7.	Add loginfo prints as debug message, i.e. When FW sends any
	loginfo, Driver should print those as debug message.
	This will help for debugging purpose.

8.	There is possibility to get config request timeout. Current
	driver is able to detect config request timetout, but it does
	not do anything on config_request timeout.  Driver should
	call mps_reinit() if any request_poll (which is called as
	part of config_request) is time out.

9.	cdb length check is required for 32 byte CDB. Add correct mpi
	control value for 32 bit CDB as below while submitting SCSI IO
	Request to controller.
	mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;

10.	Check the actual status of Message unit reset
	(mps_message_unit_reset).Previously FreeBSD Driver just writes
	MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET and never check the ack
	(it just wait for 50 millisecond).  So, Driver now check the
	status of "MPI2_FUNCTION_IOC_MESSAGE_UNIT_RESET" after writing
	it to the FW.

	Now it also checking for whether doorbell ack uses msleep with
	proper sleep flags, instead of <DELAY>.

11.	Previously CAM does not detect Multi-Lun Devices. In order to
	detect Multi-Lun Devices by CAM the driver needs following change
	set:
	a. There is "max_lun" field which Driver need to set based on
	   hw/fw support. Currently LSI released driver does not set
	   this field.
	b. Default of "max_lun" should not be 0 in OS, but it is
	   currently set to 0 in CAM layer.
	c. Export max_lun capacity to 255

12.	Driver will not reset target info after port enable complete and
	also do Device removal when Device remove from FW.  The detail
	description is as follows
	a. When Driver receive WD PD add events, it will add all
	   information in driver local data structure.
	b. Only for WD, we have below checks after port enable
	   completes, where driver clear off all information retrieved
	   at #1.
	if ((sc->WD_available &&
             (sc->WD_hide_expose == MPS_WD_HIDE_ALWAYS)) ||
             (sc->WD_valid_config && (sc->WD_hide_expose ==
                            MPS_WD_HIDE_IF_VOLUME)) {
		  // clear off target data structure.
	}
	It is mainly not to attach PDs to OS.

	FreeBSD does bus rescan as older Parallel scsi style. So Driver
	needs to handle which Drive is visible to OS.  That is a reason
	we have to clear off targ information for PDs.

	Again, above logic was implemented long time ago. Similar concept
	we have for non-wd also. For that, LSI have introduced different
	logic to hide PDs.

	Eventually, because of above gap, when Phy goes offline, we
	observe below failure. That is what Driver is not doing complete
	removal of device with FW. (which was pointed by Scott)
	Apr  5 02:39:24 Freebsd7 kernel: mpslsi0: mpssas_prepare_remove
	Apr  5 02:39:24 Freebsd7 kernel: mpssas_prepare_remove 497 : invalid handle 0xe

	Now Driver will not reset target info after port enable complete
	and also will do Device removal when Device remove from FW.

13.	Returning "CAM_SEL_TIMEOUT" instead of "CAM_TID_INVALID"
	error code on request to the Target IDs that have no devices
	conected at that moment.  As if "CAM_TID_INVALID" error code
	is returned to the CAM Layaer then it results in a huge chain
	of errors in verbose kernel messages on boot and every
	hot-plug event.

Submitted by:	Sreekanth Reddy <Sreekanth.Reddy@lsi.com>
MFC after:	3 days
2012-06-28 03:48:54 +00:00

482 lines
23 KiB
C
Raw Blame History

/*-
* Copyright (c) 2011, 2012 LSI Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* LSI MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
/*
* Copyright (c) 2000-2012 LSI Corporation.
*
*
* Name: mpi2_init.h
* Title: MPI SCSI initiator mode messages and structures
* Creation Date: June 23, 2006
*
* mpi2_init.h Version: 02.00.11
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 10-31-07 02.00.01 Fixed name for pMpi2SCSITaskManagementRequest_t.
* 12-18-07 02.00.02 Modified Task Management Target Reset Method defines.
* 02-29-08 02.00.03 Added Query Task Set and Query Unit Attention.
* 03-03-08 02.00.04 Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
* 05-21-08 02.00.05 Fixed typo in name of Mpi2SepRequest_t.
* 10-02-08 02.00.06 Removed Untagged and No Disconnect values from SCSI IO
* Control field Task Attribute flags.
* Moved LUN field defines to mpi2.h becasue they are
* common to many structures.
* 05-06-09 02.00.07 Changed task management type of Query Unit Attention to
* Query Asynchronous Event.
* Defined two new bits in the SlotStatus field of the SCSI
* Enclosure Processor Request and Reply.
* 10-28-09 02.00.08 Added defines for decoding the ResponseInfo bytes for
* both SCSI IO Error Reply and SCSI Task Management Reply.
* Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
* Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
* 02-10-10 02.00.09 Removed unused structure that had "#if 0" around it.
* 05-12-10 02.00.10 Added optional vendor-unique region to SCSI IO Request.
* 11-10-10 02.00.11 Added MPI2_SCSIIO_NUM_SGLOFFSETS define.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_INIT_H
#define MPI2_INIT_H
/*****************************************************************************
*
* SCSI Initiator Messages
*
*****************************************************************************/
/****************************************************************************
* SCSI IO messages and associated structures
****************************************************************************/
typedef struct
{
U8 CDB[20]; /* 0x00 */
U32 PrimaryReferenceTag; /* 0x14 */
U16 PrimaryApplicationTag; /* 0x18 */
U16 PrimaryApplicationTagMask; /* 0x1A */
U32 TransferLength; /* 0x1C */
} MPI2_SCSI_IO_CDB_EEDP32, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_EEDP32,
Mpi2ScsiIoCdbEedp32_t, MPI2_POINTER pMpi2ScsiIoCdbEedp32_t;
typedef union
{
U8 CDB32[32];
MPI2_SCSI_IO_CDB_EEDP32 EEDP32;
MPI2_SGE_SIMPLE_UNION SGE;
} MPI2_SCSI_IO_CDB_UNION, MPI2_POINTER PTR_MPI2_SCSI_IO_CDB_UNION,
Mpi2ScsiIoCdb_t, MPI2_POINTER pMpi2ScsiIoCdb_t;
/* SCSI IO Request Message */
typedef struct _MPI2_SCSI_IO_REQUEST
{
U16 DevHandle; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved1; /* 0x04 */
U8 Reserved2; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U32 SenseBufferLowAddress; /* 0x0C */
U16 SGLFlags; /* 0x10 */
U8 SenseBufferLength; /* 0x12 */
U8 Reserved4; /* 0x13 */
U8 SGLOffset0; /* 0x14 */
U8 SGLOffset1; /* 0x15 */
U8 SGLOffset2; /* 0x16 */
U8 SGLOffset3; /* 0x17 */
U32 SkipCount; /* 0x18 */
U32 DataLength; /* 0x1C */
U32 BidirectionalDataLength; /* 0x20 */
U16 IoFlags; /* 0x24 */
U16 EEDPFlags; /* 0x26 */
U32 EEDPBlockSize; /* 0x28 */
U32 SecondaryReferenceTag; /* 0x2C */
U16 SecondaryApplicationTag; /* 0x30 */
U16 ApplicationTagTranslationMask; /* 0x32 */
U8 LUN[8]; /* 0x34 */
U32 Control; /* 0x3C */
MPI2_SCSI_IO_CDB_UNION CDB; /* 0x40 */
#ifdef MPI2_SCSI_IO_VENDOR_UNIQUE_REGION /* typically this is left undefined */
MPI2_SCSI_IO_VENDOR_UNIQUE VendorRegion;
#endif
MPI2_SGE_IO_UNION SGL; /* 0x60 */
} MPI2_SCSI_IO_REQUEST, MPI2_POINTER PTR_MPI2_SCSI_IO_REQUEST,
Mpi2SCSIIORequest_t, MPI2_POINTER pMpi2SCSIIORequest_t;
/* SCSI IO MsgFlags bits */
/* MsgFlags for SenseBufferAddressSpace */
#define MPI2_SCSIIO_MSGFLAGS_MASK_SENSE_ADDR (0x0C)
#define MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR (0x00)
#define MPI2_SCSIIO_MSGFLAGS_IOCDDR_SENSE_ADDR (0x04)
#define MPI2_SCSIIO_MSGFLAGS_IOCPLB_SENSE_ADDR (0x08)
#define MPI2_SCSIIO_MSGFLAGS_IOCPLBNTA_SENSE_ADDR (0x0C)
/* SCSI IO SGLFlags bits */
/* base values for Data Location Address Space */
#define MPI2_SCSIIO_SGLFLAGS_ADDR_MASK (0x0C)
#define MPI2_SCSIIO_SGLFLAGS_SYSTEM_ADDR (0x00)
#define MPI2_SCSIIO_SGLFLAGS_IOCDDR_ADDR (0x04)
#define MPI2_SCSIIO_SGLFLAGS_IOCPLB_ADDR (0x08)
#define MPI2_SCSIIO_SGLFLAGS_IOCPLBNTA_ADDR (0x0C)
/* base values for Type */
#define MPI2_SCSIIO_SGLFLAGS_TYPE_MASK (0x03)
#define MPI2_SCSIIO_SGLFLAGS_TYPE_MPI (0x00)
#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE32 (0x01)
#define MPI2_SCSIIO_SGLFLAGS_TYPE_IEEE64 (0x02)
/* shift values for each sub-field */
#define MPI2_SCSIIO_SGLFLAGS_SGL3_SHIFT (12)
#define MPI2_SCSIIO_SGLFLAGS_SGL2_SHIFT (8)
#define MPI2_SCSIIO_SGLFLAGS_SGL1_SHIFT (4)
#define MPI2_SCSIIO_SGLFLAGS_SGL0_SHIFT (0)
/* number of SGLOffset fields */
#define MPI2_SCSIIO_NUM_SGLOFFSETS (4)
/* SCSI IO IoFlags bits */
/* Large CDB Address Space */
#define MPI2_SCSIIO_CDB_ADDR_MASK (0x6000)
#define MPI2_SCSIIO_CDB_ADDR_SYSTEM (0x0000)
#define MPI2_SCSIIO_CDB_ADDR_IOCDDR (0x2000)
#define MPI2_SCSIIO_CDB_ADDR_IOCPLB (0x4000)
#define MPI2_SCSIIO_CDB_ADDR_IOCPLBNTA (0x6000)
#define MPI2_SCSIIO_IOFLAGS_LARGE_CDB (0x1000)
#define MPI2_SCSIIO_IOFLAGS_BIDIRECTIONAL (0x0800)
#define MPI2_SCSIIO_IOFLAGS_MULTICAST (0x0400)
#define MPI2_SCSIIO_IOFLAGS_CMD_DETERMINES_DATA_DIR (0x0200)
#define MPI2_SCSIIO_IOFLAGS_CDBLENGTH_MASK (0x01FF)
/* SCSI IO EEDPFlags bits */
#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG (0x8000)
#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_REFTAG (0x4000)
#define MPI2_SCSIIO_EEDPFLAGS_INC_PRI_APPTAG (0x2000)
#define MPI2_SCSIIO_EEDPFLAGS_INC_SEC_APPTAG (0x1000)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG (0x0400)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_APPTAG (0x0200)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD (0x0100)
#define MPI2_SCSIIO_EEDPFLAGS_PASSTHRU_REFTAG (0x0008)
#define MPI2_SCSIIO_EEDPFLAGS_MASK_OP (0x0007)
#define MPI2_SCSIIO_EEDPFLAGS_NOOP_OP (0x0000)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_OP (0x0001)
#define MPI2_SCSIIO_EEDPFLAGS_STRIP_OP (0x0002)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP (0x0003)
#define MPI2_SCSIIO_EEDPFLAGS_INSERT_OP (0x0004)
#define MPI2_SCSIIO_EEDPFLAGS_REPLACE_OP (0x0006)
#define MPI2_SCSIIO_EEDPFLAGS_CHECK_REGEN_OP (0x0007)
/* SCSI IO LUN fields: use MPI2_LUN_ from mpi2.h */
/* SCSI IO Control bits */
#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_MASK (0xFC000000)
#define MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT (26)
#define MPI2_SCSIIO_CONTROL_DATADIRECTION_MASK (0x03000000)
#define MPI2_SCSIIO_CONTROL_NODATATRANSFER (0x00000000)
#define MPI2_SCSIIO_CONTROL_WRITE (0x01000000)
#define MPI2_SCSIIO_CONTROL_READ (0x02000000)
#define MPI2_SCSIIO_CONTROL_BIDIRECTIONAL (0x03000000)
#define MPI2_SCSIIO_CONTROL_TASKPRI_MASK (0x00007800)
#define MPI2_SCSIIO_CONTROL_TASKPRI_SHIFT (11)
#define MPI2_SCSIIO_CONTROL_TASKATTRIBUTE_MASK (0x00000700)
#define MPI2_SCSIIO_CONTROL_SIMPLEQ (0x00000000)
#define MPI2_SCSIIO_CONTROL_HEADOFQ (0x00000100)
#define MPI2_SCSIIO_CONTROL_ORDEREDQ (0x00000200)
#define MPI2_SCSIIO_CONTROL_ACAQ (0x00000400)
#define MPI2_SCSIIO_CONTROL_TLR_MASK (0x000000C0)
#define MPI2_SCSIIO_CONTROL_NO_TLR (0x00000000)
#define MPI2_SCSIIO_CONTROL_TLR_ON (0x00000040)
#define MPI2_SCSIIO_CONTROL_TLR_OFF (0x00000080)
/* SCSI IO Error Reply Message */
typedef struct _MPI2_SCSI_IO_REPLY
{
U16 DevHandle; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved1; /* 0x04 */
U8 Reserved2; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U8 SCSIStatus; /* 0x0C */
U8 SCSIState; /* 0x0D */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 TransferCount; /* 0x14 */
U32 SenseCount; /* 0x18 */
U32 ResponseInfo; /* 0x1C */
U16 TaskTag; /* 0x20 */
U16 Reserved4; /* 0x22 */
U32 BidirectionalTransferCount; /* 0x24 */
U32 Reserved5; /* 0x28 */
U32 Reserved6; /* 0x2C */
} MPI2_SCSI_IO_REPLY, MPI2_POINTER PTR_MPI2_SCSI_IO_REPLY,
Mpi2SCSIIOReply_t, MPI2_POINTER pMpi2SCSIIOReply_t;
/* SCSI IO Reply SCSIStatus values (SAM-4 status codes) */
#define MPI2_SCSI_STATUS_GOOD (0x00)
#define MPI2_SCSI_STATUS_CHECK_CONDITION (0x02)
#define MPI2_SCSI_STATUS_CONDITION_MET (0x04)
#define MPI2_SCSI_STATUS_BUSY (0x08)
#define MPI2_SCSI_STATUS_INTERMEDIATE (0x10)
#define MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
#define MPI2_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
#define MPI2_SCSI_STATUS_COMMAND_TERMINATED (0x22) /* obsolete */
#define MPI2_SCSI_STATUS_TASK_SET_FULL (0x28)
#define MPI2_SCSI_STATUS_ACA_ACTIVE (0x30)
#define MPI2_SCSI_STATUS_TASK_ABORTED (0x40)
/* SCSI IO Reply SCSIState flags */
#define MPI2_SCSI_STATE_RESPONSE_INFO_VALID (0x10)
#define MPI2_SCSI_STATE_TERMINATED (0x08)
#define MPI2_SCSI_STATE_NO_SCSI_STATUS (0x04)
#define MPI2_SCSI_STATE_AUTOSENSE_FAILED (0x02)
#define MPI2_SCSI_STATE_AUTOSENSE_VALID (0x01)
/* masks and shifts for the ResponseInfo field */
#define MPI2_SCSI_RI_MASK_REASONCODE (0x000000FF)
#define MPI2_SCSI_RI_SHIFT_REASONCODE (0)
#define MPI2_SCSI_TASKTAG_UNKNOWN (0xFFFF)
/****************************************************************************
* SCSI Task Management messages
****************************************************************************/
/* SCSI Task Management Request Message */
typedef struct _MPI2_SCSI_TASK_MANAGE_REQUEST
{
U16 DevHandle; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U8 Reserved1; /* 0x04 */
U8 TaskType; /* 0x05 */
U8 Reserved2; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U8 LUN[8]; /* 0x0C */
U32 Reserved4[7]; /* 0x14 */
U16 TaskMID; /* 0x30 */
U16 Reserved5; /* 0x32 */
} MPI2_SCSI_TASK_MANAGE_REQUEST,
MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REQUEST,
Mpi2SCSITaskManagementRequest_t,
MPI2_POINTER pMpi2SCSITaskManagementRequest_t;
/* TaskType values */
#define MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
#define MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET (0x02)
#define MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
#define MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
#define MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
#define MPI2_SCSITASKMGMT_TASKTYPE_CLR_ACA (0x08)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_TASK_SET (0x09)
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT (0x0A)
/* obsolete TaskType name */
#define MPI2_SCSITASKMGMT_TASKTYPE_QRY_UNIT_ATTENTION (MPI2_SCSITASKMGMT_TASKTYPE_QRY_ASYNC_EVENT)
/* MsgFlags bits */
#define MPI2_SCSITASKMGMT_MSGFLAGS_MASK_TARGET_RESET (0x18)
#define MPI2_SCSITASKMGMT_MSGFLAGS_LINK_RESET (0x00)
#define MPI2_SCSITASKMGMT_MSGFLAGS_NEXUS_RESET_SRST (0x08)
#define MPI2_SCSITASKMGMT_MSGFLAGS_SAS_HARD_LINK_RESET (0x10)
#define MPI2_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x01)
/* SCSI Task Management Reply Message */
typedef struct _MPI2_SCSI_TASK_MANAGE_REPLY
{
U16 DevHandle; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U8 ResponseCode; /* 0x04 */
U8 TaskType; /* 0x05 */
U8 Reserved1; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U16 Reserved3; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 TerminationCount; /* 0x14 */
U32 ResponseInfo; /* 0x18 */
} MPI2_SCSI_TASK_MANAGE_REPLY,
MPI2_POINTER PTR_MPI2_SCSI_TASK_MANAGE_REPLY,
Mpi2SCSITaskManagementReply_t, MPI2_POINTER pMpi2SCSIManagementReply_t;
/* ResponseCode values */
#define MPI2_SCSITASKMGMT_RSP_TM_COMPLETE (0x00)
#define MPI2_SCSITASKMGMT_RSP_INVALID_FRAME (0x02)
#define MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED (0x04)
#define MPI2_SCSITASKMGMT_RSP_TM_FAILED (0x05)
#define MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED (0x08)
#define MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN (0x09)
#define MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG (0x0A)
#define MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC (0x80)
/* masks and shifts for the ResponseInfo field */
#define MPI2_SCSITASKMGMT_RI_MASK_REASONCODE (0x000000FF)
#define MPI2_SCSITASKMGMT_RI_SHIFT_REASONCODE (0)
#define MPI2_SCSITASKMGMT_RI_MASK_ARI2 (0x0000FF00)
#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI2 (8)
#define MPI2_SCSITASKMGMT_RI_MASK_ARI1 (0x00FF0000)
#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI1 (16)
#define MPI2_SCSITASKMGMT_RI_MASK_ARI0 (0xFF000000)
#define MPI2_SCSITASKMGMT_RI_SHIFT_ARI0 (24)
/****************************************************************************
* SCSI Enclosure Processor messages
****************************************************************************/
/* SCSI Enclosure Processor Request Message */
typedef struct _MPI2_SEP_REQUEST
{
U16 DevHandle; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U8 Action; /* 0x04 */
U8 Flags; /* 0x05 */
U8 Reserved1; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U32 SlotStatus; /* 0x0C */
U32 Reserved3; /* 0x10 */
U32 Reserved4; /* 0x14 */
U32 Reserved5; /* 0x18 */
U16 Slot; /* 0x1C */
U16 EnclosureHandle; /* 0x1E */
} MPI2_SEP_REQUEST, MPI2_POINTER PTR_MPI2_SEP_REQUEST,
Mpi2SepRequest_t, MPI2_POINTER pMpi2SepRequest_t;
/* Action defines */
#define MPI2_SEP_REQ_ACTION_WRITE_STATUS (0x00)
#define MPI2_SEP_REQ_ACTION_READ_STATUS (0x01)
/* Flags defines */
#define MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS (0x00)
#define MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS (0x01)
/* SlotStatus defines */
#define MPI2_SEP_REQ_SLOTSTATUS_REQUEST_REMOVE (0x00040000)
#define MPI2_SEP_REQ_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI2_SEP_REQ_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI2_SEP_REQ_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI2_SEP_REQ_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI2_SEP_REQ_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI2_SEP_REQ_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI2_SEP_REQ_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI2_SEP_REQ_SLOTSTATUS_NO_ERROR (0x00000001)
/* SCSI Enclosure Processor Reply Message */
typedef struct _MPI2_SEP_REPLY
{
U16 DevHandle; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U8 Action; /* 0x04 */
U8 Flags; /* 0x05 */
U8 Reserved1; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U16 Reserved3; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 SlotStatus; /* 0x14 */
U32 Reserved4; /* 0x18 */
U16 Slot; /* 0x1C */
U16 EnclosureHandle; /* 0x1E */
} MPI2_SEP_REPLY, MPI2_POINTER PTR_MPI2_SEP_REPLY,
Mpi2SepReply_t, MPI2_POINTER pMpi2SepReply_t;
/* SlotStatus defines */
#define MPI2_SEP_REPLY_SLOTSTATUS_REMOVE_READY (0x00040000)
#define MPI2_SEP_REPLY_SLOTSTATUS_IDENTIFY_REQUEST (0x00020000)
#define MPI2_SEP_REPLY_SLOTSTATUS_REBUILD_STOPPED (0x00000200)
#define MPI2_SEP_REPLY_SLOTSTATUS_HOT_SPARE (0x00000100)
#define MPI2_SEP_REPLY_SLOTSTATUS_UNCONFIGURED (0x00000080)
#define MPI2_SEP_REPLY_SLOTSTATUS_PREDICTED_FAULT (0x00000040)
#define MPI2_SEP_REPLY_SLOTSTATUS_IN_CRITICAL_ARRAY (0x00000010)
#define MPI2_SEP_REPLY_SLOTSTATUS_IN_FAILED_ARRAY (0x00000008)
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_REBUILDING (0x00000004)
#define MPI2_SEP_REPLY_SLOTSTATUS_DEV_FAULTY (0x00000002)
#define MPI2_SEP_REPLY_SLOTSTATUS_NO_ERROR (0x00000001)
#endif
Reference in New Issue View Git Blame Copy Permalink