freebsd-dev/etc/MAKEDEV
Daniel O'Callaghan 8a96b3a58d Update MAKEDEV to handle lots of tun devices, consistent with the tun device
selection code in usr.sbin/ppp/os.c (tun0-tun127, rather than tuna and tunb).
Also, make it make all devices up to and including the requested one.
1997-03-10 02:10:58 +00:00

1241 lines
30 KiB
Bash

#!/bin/sh -
#
# Copyright (c) 1990 The Regents of the University of California.
# All rights reserved.
#
# Written and contributed by W. Jolitz 12/90
#
# Redistribution and use in source and binary forms are permitted provided
# that: (1) source distributions retain this entire copyright notice and
# comment, and (2) distributions including binaries display the following
# acknowledgement: ``This product includes software developed by the
# University of California, Berkeley and its contributors'' in the
# documentation or other materials provided with the distribution and in
# all advertising materials mentioning features or use of this software.
# Neither the name of the University nor the names of its contributors may
# be used to endorse or promote products derived from this software without
# specific prior written permission.
# THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
# WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
#
# @(#)MAKEDEV 5.2 (Berkeley) 6/22/90
#
# Device "make" file. Valid arguments:
# all makes all known devices, standard number of units (or close)
# std standard devices
# local configuration specific devices
# mach-4 mach4&lites+devices for Mach's XFree86 distribution
# (see http://www.cs.hut.fi/lites.html for more info on LITES)
#
# Tapes:
# wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape
# st* "NEW type scsi tapes" (old driver uses the
# block devices of the disks to get access)
# ft* QIC-40/QIC-80 3M cartridge tape (interfaced
# via the floppy disk controller)
#
# Disks:
# wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...)
# fd* "floppy" disk drives (3 1/2", 5 1/4")
# sd* "SCSI disks"
# cd* "SCSI CD-ROM disks"
# mcd* "Mitsumi CD-ROM disks"
# scd* "Sony CD-ROM disks"
# matcd* "Matsushita (Panasonic) CD-ROM disks"
# wcd* "IDE CD-ROM disks"
# vn* "vnode disks"
# od* "optical disks"
#
# Console ports:
# vty* virtual console devices for syscons/pcvt/codrv
#
# Pointing devices:
# mse* Logitech and ATI Inport bus mouse
# psm* PS/2 mouse
# sysmouse Mousesystems mouse emulator for syscons
#
# Time devices:
# refclock-* serial ports used by xntpd parse refclocks
#
# Terminal ports:
# tty* general purpose serial ports
# cua* dialout serial ports
# ttyA* Specialix SI/XIO dialin ports ('*' = number of devices)
# cuaA* Specialix SI/XIO dialout ports
# ttyD* Digiboard - 16 dialin ports
# cuaD* Digiboard - 16 dialout ports
#
# Pseudo terminals:
# pty* set of 32 master and slave pseudo terminals
# vty* virtual terminals using syscons/pcvt/codrv console
#
# Printers:
# lpt* stock lp
#
# SCSI devices (other than CD-ROM, tape and disk):
# uk* "unknown" device (supports ioctl calls only)
# worm* WORM driver
# pt* Processor Type (HP scanner, as one example)
#
# PC-CARD (previously called PCMCIA) support
# card* PC-CARD slots
#
# Special purpose devices:
# apm Advanced Power Management BIOS
# bpf* packet filter
# speaker pc speaker
# tw* xten power controller
# snd* various sound cards
# pcaudio PCM audio driver
# socksys iBCS2 socket system driver
# vat VAT compatibility audio driver (requires snd*)
# gsc Genius GS-4500 hand scanner
# joy pc joystick
# tun* Tunneling IP device
# snp* tty snoop devices
# spigot Video Spigot video acquisition card
# ctx* Cortex-I video acquisition card
# meteor* Matrox Meteor video acquisition card (pci)
# qcam* Connectix QuickCam(tm) parallel port camera
# isdn* ISDN devices
# labpc* National Instrument's Lab-PC and LAB-PC+
# perfmon CPU performance-monitoring counters
# pci PCI configuration-space access from user mode
#
# $Id: MAKEDEV,v 1.138 1997/03/05 14:04:00 joerg Exp $
#
PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH
umask 77
# Convert integer to partition name
dkitop() {
local p
case $1 in
0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;;
*) p="?";;
esac
echo $p
}
# Convert integer to slice name
dkitos() {
local s
case $1 in
0) s="";;
1) s="";;
*) s=s$(($1-1));;
esac
echo $s
}
# Convert disk (type, unit, slice, partition) to minor number
dkminor()
{
echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4))
}
# Convert the last character of a tty name to a minor number.
ttyminor()
{
case $unit in
[0-9]) m=$unit;;
a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;;
h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;;
o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;;
v) m=31;;
*) m="?";;
esac
echo $m
}
# Raw partition for disks
dkrawpart=2
# Compatibility slice for disks
dkcompatslice=0
# Raw slice for disks
dkrawslice=1
# Control bit for SCSI
scsictl=$((1 << 29))
# Standard umasks
disk_umask=037 # allow group operator to read disks
tape_umask=017 # allow group operator to read/write tapes
for i
do
case $i in
all)
sh MAKEDEV std # standard
sh MAKEDEV wd0 wd1 wd2 wd3 fd0 fd1 sd0 sd1 sd2 sd3 # bdev, disk
sh MAKEDEV cd0 mcd0 scd0 matcd0 wcd0 # bdev, cdrom
sh MAKEDEV od0 # bdev, ODD
sh MAKEDEV ft0 wt0 st0 # bdev, tape
sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial
sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial
sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer
sh MAKEDEV pty0 ch0 tw0 bpf0 # cdev
sh MAKEDEV perfmon speaker pcaudio psm0 mse0 sysmouse # cdev
sh MAKEDEV vty4 # cdev
sh MAKEDEV tun0 # cdev
sh MAKEDEV apm card0 card1 # cdev, laptop
;;
std)
rm -f console drum mem kmem null random urandom zero io tty klog
rm -f stdin stdout stderr lkm pci
mknod console c 0 0; chmod 600 console; chown root.wheel console
mknod drum c 4 0; chmod 640 drum; chown root.kmem drum
mknod kmem c 2 1; chmod 640 kmem; chown root.kmem kmem
mknod mem c 2 0; chmod 640 mem; chown root.kmem mem
mknod null c 2 2; chmod 666 null; chown root.wheel null
mknod random c 2 3; chmod 644 random; chown root.wheel random
mknod urandom c 2 4; chmod 644 urandom; chown root.wheel urandom
mknod zero c 2 12; chmod 666 zero; chown root.wheel zero
mknod io c 2 14; chmod 600 io; chown root.wheel io
mknod tty c 1 0; chmod 666 tty; chown root.wheel tty
mknod klog c 7 0; chmod 600 klog; chown root.wheel klog
mknod stdin c 22 0; chmod 666 stdin; chown root.wheel stdin
mknod stdout c 22 1; chmod 666 stdout; chown root.wheel stdout
mknod stderr c 22 2; chmod 666 stderr; chown root.wheel stderr
mknod lkm c 32 0; chmod 644 lkm; chown root.wheel lkm
mknod pci c 78 0; chmod 644 pci; chown root.wheel pci
rm -f fd/*
mkdir fd > null 2>&1
(cd fd && eval `echo "" | awk ' BEGIN { \
for (i = 0; i < 64; i++) \
printf("mknod %d c 22 %d;", i, i)}'`)
chown -R bin.bin fd
chmod 555 fd
chmod 666 fd/*
;;
mach-4)
mknod iopl c 22 0
mknod kbd c 23 0
mknod mouse c 24 0
mknod time c 25 0
mknod timezone c 26 0
;;
# Create device files for new Archive/Wangtek QIC-02 tape driver (vak)
wt*)
umask $tape_umask
u=`expr $i : '..\(.*\)'`
if [ x$u = x ]; then u=0; fi
rm -f r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
mknod rwt${u} c 10 `expr 0 + $u` # default density, 512b blocks
mknod nrwt${u} c 10 `expr 4 + $u`
# mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks
# mknod nrWt${u} c 10 `expr 68 + $u`
mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes
mknod nrwt${u}b c 10 `expr 20 + $u`
mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes
mknod nrwt${u}c c 10 `expr 28 + $u`
mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes
mknod nrwt${u}d c 10 `expr 36 + $u`
# mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes?
# mknod nrwt${u}e c 10 `expr 44 + $u`
# mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes?
# mknod nrwt${u}f c 10 `expr 52 + $u`
chown root.operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f]
umask 77
;;
# Individual slices.
od*s*|sd*s*|vn*s*|wd*s*)
umask $disk_umask
case $i in
od*s*) name=od; blk=20; chr=70;;
sd*s*) name=sd; blk=4; chr=13;;
wd*s*) name=wd; blk=0; chr=3;;
vn*s*) name=vn; blk=15; chr=43;;
esac
unit=`expr $i : '..\([0-9]*\)s'`
slice=`expr $i : '..[0-9]*s\([0-9]*\)'`
part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'`
case $unit in
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
case $slice in
[0-9]|[1-2][0-9]|30)
oldslice=$slice
slice=$(($slice+1))
slicename=`dkitos $slice`
rm -f $name$unit$slicename* r$name$unit$slicename*
minor=`dkminor 0 $unit $slice $dkrawpart`
mknod $name$unit$slicename b $blk $minor
mknod r$name$unit$slicename c $chr $minor
case $part in
[a-h])
case $oldslice in
0) slice=$oldslice ;;
esac
for part in 0 1 2 3 4 5 6 7
do
minor=`dkminor 0 $unit $slice $part`
partname=`dkitop $part`
mknod $name$unit$slicename$partname \
b $blk $minor
mknod r$name$unit$slicename$partname \
c $chr $minor
done
;;
"")
;;
*)
echo bad partition for disk in: $i
;;
esac
chgrp operator $name$unit$slicename* \
r$name$unit$slicename*
;;
*)
echo bad slice for disk in: $i
;;
esac
;;
*)
echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)"
;;
esac
umask 77
;;
fd*)
umask $disk_umask
unit=`expr $i : '..\(.*\)'`
name=fd; blk=2; chr=9
rm -f $name$unit* r$name$unit*
case $unit in
0|1|2|3)
mknod ${name}${unit} b $blk `expr $unit '*' 64`
mknod r${name}${unit} c $chr `expr $unit '*' 64`
# Fake BSD partitions
for i in a b c d e f g h
do
ln ${name}${unit} ${name}${unit}$i
ln r${name}${unit} r${name}${unit}$i
done
# User-readable and programmer-readable name sets
mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1`
mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1`
# ln ${name}${unit}.1720 ${name}${unit}135hs21
# ln r${name}${unit}.1720 r${name}${unit}135hs21
mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2`
mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2`
# ln ${name}${unit}.1480 ${name}${unit}135hs18
# ln r${name}${unit}.1480 r${name}${unit}135hs18
# ln ${name}${unit}.1480 ${name}${unit}96hs18
# ln r${name}${unit}.1480 r${name}${unit}96hs18
mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3`
mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3`
# ln ${name}${unit}.1440 ${name}${unit}135
# ln r${name}${unit}.1440 r${name}${unit}135
# ln ${name}${unit}.1440 ${name}${unit}135ds18
# ln r${name}${unit}.1440 r${name}${unit}135ds18
# ln ${name}${unit}.1440 ${name}${unit}96ds18
# ln r${name}${unit}.1440 r${name}${unit}96ds18
mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4`
mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4`
# ln ${name}${unit}.1200 ${name}${unit}96
# ln r${name}${unit}.1200 r${name}${unit}96
# ln ${name}${unit}.1200 ${name}${unit}96ds15
# ln r${name}${unit}.1200 r${name}${unit}96ds15
# ln ${name}${unit}.1200 ${name}${unit}135ds15
# ln r${name}${unit}.1200 r${name}${unit}135ds15
mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5`
mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5`
# ln ${name}${unit}.820 ${name}${unit}96hs10
# ln r${name}${unit}.820 r${name}${unit}96hs10
# ln ${name}${unit}.820 ${name}${unit}135hs10
# ln r${name}${unit}.820 r${name}${unit}135hs10
mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6`
mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6`
# ln ${name}${unit}.800 ${name}${unit}96ds10
# ln r${name}${unit}.800 r${name}${unit}96ds10
# ln ${name}${unit}.800 ${name}${unit}135ds10
# ln r${name}${unit}.800 r${name}${unit}135ds10
mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7`
mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7`
# ln ${name}${unit}.720 ${name}${unit}96ds9
# ln r${name}${unit}.720 r${name}${unit}96ds9
# ln ${name}${unit}.720 ${name}${unit}135ds9
# ln r${name}${unit}.720 r${name}${unit}135ds9
mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8`
mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8`
# ln ${name}${unit}.360 ${name}${unit}48
# ln r${name}${unit}.360 r${name}${unit}48
# ln ${name}${unit}.360 ${name}${unit}48ds9
# ln r${name}${unit}.360 r${name}${unit}48ds9
chgrp operator ${name}${unit}* r${name}${unit}*
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
ft*)
umask $tape_umask
unit=`expr $i : '..\(.*\)'`
name=ft; blk=2; chr=9
rm -f $name$unit* r$name$unit*
case $unit in
0|1|2|3)
mknod ${name}${unit} b $blk `expr $unit '*' 64 + 32`
mknod r${name}${unit} c $chr `expr $unit '*' 64 + 32`
ln ${name}${unit} ${name}${unit}a
ln r${name}${unit} r${name}${unit}a
chgrp operator ${name}${unit}* r${name}${unit}*
;;
*)
echo bad unit for tape in: $i
;;
esac
umask 77
;;
od*|sd*|vn*|wd*)
umask $disk_umask
case $i in
od*) name=od; blk=20; chr=70;;
sd*) name=sd; blk=4; chr=13;;
vn*) name=vn; blk=15; chr=43;;
wd*) name=wd; blk=0; chr=3;;
esac
unit=`expr $i : '..\(.*\)'`
case $unit in
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
for slicepartname in s0h s1 s2 s3 s4
do
sh MAKEDEV $name$unit$slicepartname
done
case $name in
od|sd)
rm -f r${name}${unit}.ctl
minor=`dkminor 0 $unit 0 0`
mknod r${name}${unit}.ctl c $chr $(($minor | $scsictl))
chmod 600 r${name}${unit}.ctl
;;
esac
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
ccd*)
umask 37
name=ccd
blk=21; chr=74
unit=`expr $i : '...\(.*\)'`
case $unit in
[0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1])
rm -f r${name}${unit}.ctl
minor=`dkminor 0 $unit 0 0`
mknod r${name}${unit}.ctl c $chr $(($minor | $scsictl))
chmod 600 r${name}${unit}.ctl
for part in 0 1 2 3 4 5 6 7
do
minor=`dkminor 0 $unit 0 $part`
partname=`dkitop $part`
mknod $name$unit$partname \
b $blk $minor
mknod r$name$unit$partname \
c $chr $minor
done
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
uk*)
unit=`expr $i : 'uk\(.*\)'`
rm -f uk$unit
mknod uk$unit c 31 $unit
;;
worm*)
umask $disk_umask
unit=`expr $i : 'worm\(.*\)'`
if [ "X${unit}" = "X" ]; then
unit=0
fi
chr=62
blk=23
name=worm
rm -f ${name}${unit}
mknod ${name}${unit} b $blk ${unit}
rm -f r${name}${unit}
mknod r${name}${unit} c $chr ${unit}
chgrp operator ${name}${unit} r${name}${unit}
umask 077
rm -f r${name}${unit}.ctl
mknod r${name}${unit}.ctl c $chr `expr $unit + $scsictl `
;;
# SCSI processor type driver
pt[0-9]*)
chr=61
name=pt
unit=`expr $i : 'pt\([0-9][0-9]*\)'`
if [ "X${unit}" = "X" ]; then
unit=0
fi
unit=`expr $unit + 1 - 1`
rm -f ${name}${unit}
mknod ${name}${unit} c $chr $unit
rm -f ${name}${unit}.ctl
mknod ${name}${unit}.ctl c $chr `expr $unit + $scsictl `
;;
pty*)
class=`expr $i : 'pty\(.*\)'`
case $class in
0) offset=0 name=p;;
1) offset=32 name=q;;
2) offset=64 name=r;;
3) offset=96 name=s;;
# Note that xterm (at least) only look at p-s.
4) offset=128 name=P;;
5) offset=160 name=Q;;
6) offset=192 name=R;;
7) offset=224 name=S;;
# This still leaves [tuTU].
*) echo bad unit for pty in: $i;;
esac
case $class in
0|1|2|3|4|5|6|7)
umask 0
eval `echo $offset $name | awk ' { b=$1; n=$2 } END { \
for (i = 0; i < 32; i++) {
c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \
printf("rm -f tty%s%s pty%s%s; \
mknod tty%s%s c 5 %d; \
mknod pty%s%s c 6 %d; \
chown root.wheel tty%s%s pty%s%s;", \
n, c, n, c, \
n, c, b+i, \
n, c, b+i, \
n, c, n, c); \
} \
}'`
umask 77
;;
esac
;;
st*)
umask $tape_umask
unit=`expr $i : '..\(.*\)'`
chr=14
#remove old stype names
rm -f [hml]rst[0123456] [hml][en]rst[0123456] [hml]enrst[0123456]
#remove new style names
rm -f rst${unit} [en]rst${unit} enrst${unit}
rm -f rst${unit}.[0123] nrst${unit}.[0123]\
erst${unit}.[0123] st${unit}ctl.[0123]
#remove control device
case $unit in
0|1|2|3|4|5|6)
for mode in 0 1 2 3
do
mknod rst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 0`
mknod nrst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 1`
mknod erst${unit}.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 2`
mknod st${unit}ctl.${mode} c $chr `expr $unit '*' 16 + $mode '*' 4 + 3`
chgrp operator rst${unit}.${mode}\
nrst${unit}.${mode} \
erst${unit}.${mode} \
st${unit}ctl.${mode}
chmod 600 st${unit}ctl.${mode}
done
rm -f rst${unit}.ctl
mknod rst${unit}.ctl c $chr `expr $unit '*' 16 + $scsictl `
chmod 600 rst${unit}.ctl
ln rst${unit}.0 rst${unit}
ln nrst${unit}.0 nrst${unit}
ln erst${unit}.0 erst${unit}
;;
*)
echo bad unit for tape in: $i
;;
esac
umask 77
;;
ch*)
umask 37
unit=`expr $i : '..\(.*\)'`
case $i in
ch*) name=ch; chr=17;;
esac
rm -f $name$unit
case $unit in
0|1|2|3|4|5|6)
mknod ${name}${unit} c $chr `expr $unit '*' 16 + 0`
chgrp operator ${name}${unit}
rm -f r${name}${unit}.ctl
mknod r${name}${unit}.ctl c $chr `expr $unit '*' 16 + $scsictl `
chmod 600 r${name}${unit}.ctl
;;
*)
echo bad unit for media changer in: $i
;;
esac
umask 77
;;
cd*|mcd*|scd*)
umask $disk_umask
case $i in
cd*) unit=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;;
mcd*) unit=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;;
scd*) unit=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;;
esac
rm -f $name$unit? r$name$unit?
case $unit in
0|1|2|3|4|5|6)
mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0`
mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2`
mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0`
mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2`
chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
case $name in
cd)
rm -f r${name}${unit}.ctl
mknod r${name}${unit}.ctl c $chr `expr $unit '*' 8 + $scsictl `
chmod 600 r${name}${unit}.ctl
;;
esac
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
matcd*)
umask 2
case $i in
matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;;
esac
rm -f $name$unit? r$name$unit? $name$unit?? r$name$unit??
case $unit in
0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15)
mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0`
mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2`
mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0`
mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2`
chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h]
chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h]
mknod ${name}${unit}la b $blk `expr $unit '*' 8 + 128`
mknod ${name}${unit}lc b $blk `expr $unit '*' 8 + 130`
mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128`
mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130`
chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h]
chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h]
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
wcd*)
umask 2 ;
unit=`expr $i : '...\(.*\)'`
blk=19
chr=69
rm -f wcd$unit? rwcd$unit?
case $unit in
0|1|2|3)
mknod wcd${unit}a b $blk `expr $unit '*' 8 + 0`
mknod rwcd${unit}a c $chr `expr $unit '*' 8 + 0`
mknod wcd${unit}c b $blk `expr $unit '*' 8 + 2`
mknod rwcd${unit}c c $chr `expr $unit '*' 8 + 2`
chgrp operator wcd${unit}[a-h] rwcd${unit}[a-h]
chmod 640 wcd${unit}[a-h] rwcd${unit}[a-h]
;;
*)
echo bad unit for disk in: $i
;;
esac
umask 77
;;
lpt*)
unit=`expr $i : 'lpt\(.*\)'`
rm -f lpt$unit
rm -f lpctl$unit
mknod lpt$unit c 16 $unit
mknod lpctl$unit c 16 `expr $unit + 128`
chown root.wheel lpt$unit
chown root.wheel lpctl$unit
;;
tw*)
unit=`expr $i : 'tw\(.*\)'`
rm -f tw$unit
mknod tw$unit c 19 $unit
chown root.operator tw$unit
;;
# Use this to create virtual consoles for syscons, pcvt or codrv
# ttyv0-b
# use as MAKEDEV vtyNN to create NN entries
vty*)
chr=12
units=`expr $i : 'vty\(.*\)'`
eval `echo ${chr} ${units} | awk ' { c=$1; n=$2 } END {
for (i = 0; i < n; i++)
printf("rm -f ttyv%01x; mknod ttyv%01x c %d %d; \
chown root.wheel ttyv%01x;", \
i, i, c, i, i); }'`
ln -fs ttyv0 vga # XXX X still needs this pccons relic
;;
bpf*)
unit=`expr $i : 'bpf\(.*\)'`
rm -f bpf$unit
mknod bpf$unit c 23 $unit
chown root.wheel bpf$unit
;;
speaker)
rm -f speaker
mknod speaker c 26 0
chown root.wheel speaker
;;
cuaa?|cua?)
umask 7
unit=`expr $i : 'cua.*\(.\)$'`
rm -f cua*a$unit
m=`ttyminor $unit`
mknod cuaa$unit c 28 `expr $m + 128`
mknod cuaia$unit c 28 `expr $m + 32 + 128`
mknod cuala$unit c 28 `expr $m + 64 + 128`
chown uucp.dialer cua*a$unit
umask 77
;;
tty0?|ttyd?|tty?)
unit=`expr $i : 'tty.*\(.\)$'`
rm -f tty*d$unit
m=`ttyminor $unit`
mknod ttyd$unit c 28 $m
mknod ttyid$unit c 28 `expr $m + 32`
mknod ttyld$unit c 28 `expr $m + 64`
chown root.wheel tty*d$unit
;;
cuac?)
umask 7
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
g h i j k l m n o p q r s t u v"
major=48
card=`expr $i : 'cua.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=`expr $card \* 65536 + $minor`
name=$card$unit
rm -f cuac$name cuaic$name cualc$name
mknod cuac$name c $major `expr $minor + 128`
mknod cuaic$name c $major `expr $minor + 32 + 128`
mknod cualc$name c $major `expr $minor + 64 + 128`
chown uucp.dialer cuac$name cuaic$name cualc$name
done
umask 77
;;
ttyc?)
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f
g h i j k l m n o p q r s t u v"
major=48
card=`expr $i : 'tty.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=`expr $card \* 65536 + $minor`
name=$card$unit
rm -f ttyc$name ttyic$name ttylc$name
mknod ttyc$name c $major $minor
mknod ttyic$name c $major `expr $minor + 32`
mknod ttylc$name c $major `expr $minor + 64`
chown root.wheel ttyc$name ttyic$name ttylc$name
done
;;
# RISCom8 'rc' driver entries
cuam?)
umask 7
unit=`expr $i : 'cua.*\(.\)$'`
rm -f cuam$unit
m=`ttyminor $unit`
mknod cuam$unit c 63 `expr $m + 128`
chown uucp.dialer cuam$unit
umask 77
;;
ttym?)
unit=`expr $i : 'tty.*\(.\)$'`
rm -f ttym$unit
m=`ttyminor $unit`
mknod ttym$unit c 63 $m
chown root.wheel ttym$unit
;;
# Specialix SI/XIO.
# Note: these are 'base 1' to match the numbers on the panels, and to match
# the manual that comes with the system.
ttyA*)
major=68
nports=`expr $i : 'ttyA\(.*\)$'`
port=1
while [ $port -le $nports ]; do
minor=`expr $port - 1`
name=`expr $port + 1000 | cut -c 3-4`
rm -f tty*A$name
mknod ttyA$name c $major $minor
chown root.wheel ttyA$name
mknod ttyiA$name c $major `expr $minor + 65536`
chown root.wheel ttyiA$name
mknod ttylA$name c $major `expr $minor + 131072`
chown root.wheel ttylA$name
port=`expr $port + 1`
done
# For the user-mode control program, 'sicontrol'
rm -f si_control
mknod si_control c 68 262144
chmod 600 si_control
chown root.wheel si_control
;;
cuaA*)
umask 7
major=68
nports=`expr $i : 'cuaA\(.*\)$'`
port=1
while [ $port -le $nports ]; do
minor=`expr $port - 1`
name=`expr $port + 1000 | cut -c 3-4`
rm -f cuaA$name
mknod cuaA$name c $major `expr $minor + 128`
chown uucp.dialer cuaA$name
port=`expr $port + 1`
done
umask 77
;;
# Digiboard PC/?? 16 port card.
# The current scheme of minor numbering is:
#
# unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5}
#
# CARD bitfield in future versions may be extended to 3 bits.
#
# See dgb(4)
#
ttyD?)
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
major=58
card=`expr $i : 'tty.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=`expr $card \* 65536 + $minor`
name=$card$unit
rm -f tty*D$name
mknod ttyD$name c $major $minor
mknod ttyiD$name c $major `expr $minor + 32`
mknod ttylD$name c $major `expr $minor + 64`
chown root.wheel tty*D$name
done
;;
cuaD?)
umask 7
portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f"
major=58
card=`expr $i : 'cua.*\(.\)$'`
for unit in $portlist
do
minor=`ttyminor $unit`
minor=`expr $card \* 65536 + $minor`
name=$card$unit
rm -f cua*D$name
mknod cuaD$name c $major `expr $minor + 128`
mknod cuaiD$name c $major `expr $minor + 32 + 128`
mknod cualD$name c $major `expr $minor + 64 + 128`
chown uucp.dialer cua*D$name
done
umask 77
;;
mse*)
unit=`expr $i : 'mse\(.*\)'`
chr=27
rm -f mse$unit
mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
chown root.wheel mse$unit
;;
psm*)
unit=`expr $i : 'psm\(.*\)'`
chr=21
rm -f psm$unit
mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11
chown root.wheel psm$unit
;;
mouse*)
name=`expr $i : 'mouse\(.*\)'`
if [ ! -c $name ]; then
$0 $name # make the appropriate device
fi
rm -f mouse
ln -s $name mouse
;;
pcaudio)
rm -f pcaudio pcaudioctl
mknod pcaudio c 24 0
mknod pcaudioctl c 24 128
chown root.wheel pcaudio pcaudioctl
;;
socksys)
rm -f socksys nfsd spx
mknod socksys c 41 0
mknod spx c 41 1
ln -s socksys nfsd
chown root.wheel socksys nfsd spx
chmod 666 socksys nfsd spx
;;
snd*)
#
# changes from Linux voxware
# minor Linux FreeBSD
# 8 sequencer2 (aka music0) music0
# 17 patmgr0 sequencer1
# 33 patmgr1 sequencer2
#
unit=`expr $i : 'snd\(.*\)'`
chr=30
# XXX write this less verbosely, like std
snd_security_hole=0 # XXX
umask $snd_security_hole
if [ $unit = "0" ] ; then
rm -f mixer ; ln -s mixer$unit mixer
rm -f sequencer ; ln -s sequencer$unit sequencer
rm -f dsp ; ln -s dsp$unit dsp
rm -f audio ; ln -s audio$unit audio
rm -f dspW ; ln -s dspW$unit dspW
rm -f music ; ln -s music$unit music
rm -f pss ; ln -s pss$unit pss
fi
rm -f mixer$unit # Mixer [ Control ]
mknod mixer$unit c $chr `expr $unit '*' 16 + 0`
rm -f sequencer$unit # Sequencer [ FM Synth and MIDI output ]
mknod sequencer$unit c $chr `expr $unit '*' 16 + 1`
rm -f midi midi$unit # Midi 0
mknod midi$unit c $chr `expr $unit '*' 16 + 2`
rm -f dsp$unit # DSP [ Digitized voice ]
mknod dsp$unit c $chr `expr $unit '*' 16 + 3`
rm -f audio$unit # SPARC audio [ Not fully implemented ]
mknod audio$unit c $chr `expr $unit '*' 16 + 4`
rm -f dspW$unit # Wide DSP (each sample is 16 bits)
mknod dspW$unit c $chr `expr $unit '*' 16 + 5`
rm -f sndstat # Status Device [ Debugging interface, only 1 ]
mknod sndstat c $chr 6
# minor number 7 is unused
rm -f music$unit # Sequencer level 2
mknod music$unit c $chr `expr $unit '*' 16 + 8`
rm -f pss$unit # PSS and programmable devices
mknod pss$unit c $chr `expr $unit '*' 16 + 9`
# minor numbers 10-15 are unused
umask 77
;;
vat)
rm -f vatio
mknod vatio c 25 128
chown root.wheel vatio
chmod 660 vatio
;;
gsc*)
unit=`expr $i : 'gsc\(.*\)'`
rm -f gsc${unit}*
mknod gsc${unit} c 47 $unit
mknod gsc${unit}p c 47 $(($unit + 8))
mknod gsc${unit}d c 47 $(($unit + 32))
mknod gsc${unit}pd c 47 $(($unit + 40))
chmod 666 gsc${unit}*
chown root.wheel gsc${unit}*
;;
apm*)
rm -f apm
chr=39
mknod apm c $chr 0
chown root.operator apm
chmod 660 apm
;;
card*)
unit=`expr $i : 'card\(.*\)'`
chr=50
rm -f card$unit
mknod card$unit c $chr $unit
chmod 644 card$unit
chown root.wheel card$unit
;;
ttyx?|ttyy?|ttyz?)
case $i in
*0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;;
*4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;;
*8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;;
*c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;;
esac
case $i in
ttyy?) unit=`expr $unit \+ 16`;;
ttyz?) unit=`expr $unit \+ 32`;;
esac
rm -f $i
mknod $i c 42 $unit
chown uucp.wheel $i
;;
cronyx)
rm -f cronyx
mknod cronyx c 42 63
chown root.wheel cronyx
;;
joy)
rm -f joy0 joy1
mknod joy0 c 51 0
mknod joy1 c 51 1
chown root.operator joy0 joy1
chmod 640 joy0 joy1
;;
spigot)
rm -f spigot
mknod spigot c 11 0
chmod 444 spigot
;;
ctx?)
unit=`expr $i : 'ctx\(.*\)'`
rm -f ctx$unit
mknod ctx$unit c 40 $unit
chmod 444 ctx$unit
;;
qcam?)
unit=`expr $i : 'qcam\(.*\)'`
rm -f qcam$unit
mknod qcam$unit c 73 $unit
chmod 444 qcam$unit
;;
meteor?)
unit=`expr $i : 'meteor\(.*\)'`
rm -f meteor$unit
mknod meteor$unit c 67 $unit
chown root.wheel meteor$unit
chmod 444 meteor$unit
;;
tun*)
ntun=`expr $i : 'tun\(.*\)$'`
unit=0
while [ $unit -le $ntun ]; do
rm -f tun$unit
mknod tun$unit c 52 $unit
chown uucp.dialer tun$unit
unit=`expr $unit + 1`
done
;;
sysmouse)
rm -f sysmouse consolectl
mknod sysmouse c 12 128
mknod consolectl c 12 255
chown root.wheel sysmouse consolectl
;;
snp?)
unit=`expr $i : 'snp\(.*\)'`
rm -f snp$unit
mknod snp$unit c 53 $unit
chown root.wheel snp$unit
;;
# Valid arguments to isdn:
# none makes all the node but nic0
# 5000 makes nic0 for Niccy 5000
# 3008 makes nic0 for Niccy 3008
# 3009 makes nic0 for Niccy 3009
# 1000 makes nodes for Niccy 1000
# tel* makes nodes for TELES S0
#
isdn*)
type=`expr $i : 'isdn\(.*\)'`
if [ "X${type}" = "X" ]; then
type=none
fi
unit=54
rm -f nic0 snic0 n?ic0 isdn isdn? ity?? itel?? ispy
mknod n8ic0 c $unit 0
mknod snic0 c `expr $unit + 4` 0
mknod n9ic0 c `expr $unit + 6` 0
mknod isdn c `expr $unit + 1` 0
mknod isdn1 c `expr $unit + 1` 1
mknod isdn2 c `expr $unit + 1` 2
mknod ity00 c `expr $unit + 2` 0
mknod ity01 c `expr $unit + 2` 1
mknod ityo0 c `expr $unit + 2` 130
mknod ityo1 c `expr $unit + 2` 131
mknod itel00 c `expr $unit + 3` 0
mknod itel01 c `expr $unit + 3` 1
mknod ispy c `expr $unit + 5` 0
chown root.wheel n8ic0 n9ic0 snic0 isdn isdn? ity?? itel?? ispy
chown uucp.wheel ityo[01]
case $type in
5000)
ln snic0 nic0
chown root.wheel nic0
;;
3008)
ln n8ic0 nic0
chown root.wheel nic0
;;
3009)
ln n9ic0 nic0
chown root.wheel nic0
;;
1000|tel*|TEL*|none)
;;
*)
echo "No such ISDN device subtype: $type"
;;
esac
;;
# dufault@hda.com: If I do much more work on other A-D boards
# then eventually we'll have a "ad" and "dio" interface and some of these
# "labpcaio" ones will be gone.
# labpcaio: D-A and A-D.
# labpcdio: Digital in and Digital out.
#
labpc*)
umask 7
case $i in
labpcaio*)
name=labpcaio
unit=`expr $i : 'labpcaio\(.*\)'`
all="0 1 2 3 4 5 6 7"
offset=0
;;
labpcdio*)
name=labpcdio
unit=`expr $i : 'labpcdio\(.*\)'`
all="0 1 2 3"
offset=8
;;
*)
echo "Don't understand that labpc name"
exit
;;
esac
if [ "X${unit}" = "X" ]; then
unit=all
fi
case $unit in
0|1|2|3|4|5|6|7)
rm -f $name$unit
mknod $name$unit c 66 `expr $offset + $unit `
;;
all)
for i in $all
do
rm -f $name$i
mknod $name$i c 66 `expr $offset + $i `
done
;;
*)
echo "No such LabPC unit: $unit"
;;
esac
umask 77
;;
perfmon)
rm -f perfmon
mknod perfmon c 2 32
chown root.kmem perfmon
chmod 640 perfmon
;;
local)
umask 0 # XXX should be elsewhere
sh MAKEDEV.local
umask 77
;;
*)
echo $i - no such device name
;;
esac
done