freebsd-dev/sys/mips/sibyte/sb_machdep.c
Attilio Rao 590f9303e5 Merge from vmobj-rwlock branch:
Remove unused inclusion of vm/vm_pager.h and vm/vnode_pager.h.

Sponsored by:	EMC / Isilon storage division
Tested by:	pho
Reviewed by:	alc
2013-02-26 01:00:11 +00:00

433 lines
9.0 KiB
C

/*-
* Copyright (c) 2007 Bruce M. Simpson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include "opt_kdb.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/imgact.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/cons.h>
#include <sys/exec.h>
#include <sys/ucontext.h>
#include <sys/proc.h>
#include <sys/kdb.h>
#include <sys/ptrace.h>
#include <sys/reboot.h>
#include <sys/signalvar.h>
#include <sys/sysent.h>
#include <sys/sysproto.h>
#include <sys/user.h>
#include <sys/timetc.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <machine/cache.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cpuinfo.h>
#include <machine/cpufunc.h>
#include <machine/cpuregs.h>
#include <machine/hwfunc.h>
#include <machine/intr_machdep.h>
#include <machine/locore.h>
#include <machine/md_var.h>
#include <machine/pte.h>
#include <machine/sigframe.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
#ifdef SMP
#include <sys/smp.h>
#include <machine/smp.h>
#endif
#ifdef CFE
#include <dev/cfe/cfe_api.h>
#endif
#include "sb_scd.h"
#ifdef DDB
#ifndef KDB
#error KDB must be enabled in order for DDB to work!
#endif
#endif
#ifdef CFE_ENV
extern void cfe_env_init(void);
#endif
extern int *edata;
extern int *end;
extern char MipsTLBMiss[], MipsTLBMissEnd[];
void
platform_cpu_init()
{
/* Nothing special */
}
static void
sb_intr_init(int cpuid)
{
int intrnum, intsrc;
/*
* Disable all sources to the interrupt mapper and setup the mapping
* between an interrupt source and the mips hard interrupt number.
*/
for (intsrc = 0; intsrc < NUM_INTSRC; ++intsrc) {
intrnum = sb_route_intsrc(intsrc);
sb_disable_intsrc(cpuid, intsrc);
sb_write_intmap(cpuid, intsrc, intrnum);
#ifdef SMP
/*
* Set up the mailbox interrupt mapping.
*
* The mailbox interrupt is "special" in that it is not shared
* with any other interrupt source.
*/
if (intsrc == INTSRC_MAILBOX3) {
intrnum = platform_ipi_intrnum();
sb_write_intmap(cpuid, INTSRC_MAILBOX3, intrnum);
sb_enable_intsrc(cpuid, INTSRC_MAILBOX3);
}
#endif
}
}
static void
mips_init(void)
{
int i, j, cfe_mem_idx, tmp;
uint64_t maxmem;
#ifdef CFE_ENV
cfe_env_init();
#endif
TUNABLE_INT_FETCH("boothowto", &boothowto);
if (boothowto & RB_VERBOSE)
bootverbose++;
#ifdef MAXMEM
tmp = MAXMEM;
#else
tmp = 0;
#endif
TUNABLE_INT_FETCH("hw.physmem", &tmp);
maxmem = (uint64_t)tmp * 1024;
/*
* XXX
* If we used vm_paddr_t consistently in pmap, etc., we could
* use 64-bit page numbers on !n64 systems, too, like i386
* does with PAE.
*/
#if !defined(__mips_n64)
if (maxmem == 0 || maxmem > 0xffffffff)
maxmem = 0xffffffff;
#endif
#ifdef CFE
/*
* Query DRAM memory map from CFE.
*/
physmem = 0;
cfe_mem_idx = 0;
for (i = 0; i < 10; i += 2) {
int result;
uint64_t addr, len, type;
result = cfe_enummem(cfe_mem_idx++, 0, &addr, &len, &type);
if (result < 0) {
phys_avail[i] = phys_avail[i + 1] = 0;
break;
}
KASSERT(type == CFE_MI_AVAILABLE,
("CFE DRAM region is not available?"));
if (bootverbose)
printf("cfe_enummem: 0x%016jx/%ju.\n", addr, len);
if (maxmem != 0) {
if (addr >= maxmem) {
printf("Ignoring %ju bytes of memory at 0x%jx "
"that is above maxmem %dMB\n",
len, addr,
(int)(maxmem / (1024 * 1024)));
continue;
}
if (addr + len > maxmem) {
printf("Ignoring %ju bytes of memory "
"that is above maxmem %dMB\n",
(addr + len) - maxmem,
(int)(maxmem / (1024 * 1024)));
len = maxmem - addr;
}
}
phys_avail[i] = addr;
if (i == 0 && addr == 0) {
/*
* If this is the first physical memory segment probed
* from CFE, omit the region at the start of physical
* memory where the kernel has been loaded.
*/
phys_avail[i] += MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
}
phys_avail[i + 1] = addr + len;
physmem += len;
}
realmem = btoc(physmem);
#endif
for (j = 0; j < i; j++)
dump_avail[j] = phys_avail[j];
physmem = realmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
/*
* Sibyte has a L1 data cache coherent with DMA. This includes
* on-chip network interfaces as well as PCI/HyperTransport bus
* masters.
*/
cpuinfo.cache_coherent_dma = TRUE;
/*
* XXX
* The kernel is running in 32-bit mode but the CFE is running in
* 64-bit mode. So the SR_KX bit in the status register is turned
* on by the CFE every time we call into it - for e.g. CFE_CONSOLE.
*
* This means that if get a TLB miss for any address above 0xc0000000
* and the SR_KX bit is set then we will end up in the XTLB exception
* vector.
*
* For now work around this by copying the TLB exception handling
* code to the XTLB exception vector.
*/
{
bcopy(MipsTLBMiss, (void *)MIPS_XTLB_MISS_EXC_VEC,
MipsTLBMissEnd - MipsTLBMiss);
mips_icache_sync_all();
mips_dcache_wbinv_all();
}
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
void
platform_reset(void)
{
/*
* XXX SMP
* XXX flush data caches
*/
sb_system_reset();
}
static void
kseg0_map_coherent(void)
{
uint32_t config;
const int CFG_K0_COHERENT = 5;
config = mips_rd_config();
config &= ~MIPS_CONFIG_K0_MASK;
config |= CFG_K0_COHERENT;
mips_wr_config(config);
}
#ifdef SMP
void
platform_ipi_send(int cpuid)
{
KASSERT(cpuid == 0 || cpuid == 1,
("platform_ipi_send: invalid cpuid %d", cpuid));
sb_set_mailbox(cpuid, 1ULL);
}
void
platform_ipi_clear(void)
{
int cpuid;
cpuid = PCPU_GET(cpuid);
sb_clear_mailbox(cpuid, 1ULL);
}
int
platform_ipi_intrnum(void)
{
return (4);
}
struct cpu_group *
platform_smp_topo(void)
{
return (smp_topo_none());
}
void
platform_init_ap(int cpuid)
{
int ipi_int_mask, clock_int_mask;
KASSERT(cpuid == 1, ("AP has an invalid cpu id %d", cpuid));
/*
* Make sure that kseg0 is mapped cacheable-coherent
*/
kseg0_map_coherent();
sb_intr_init(cpuid);
/*
* Unmask the clock and ipi interrupts.
*/
clock_int_mask = hard_int_mask(5);
ipi_int_mask = hard_int_mask(platform_ipi_intrnum());
set_intr_mask(ipi_int_mask | clock_int_mask);
}
int
platform_start_ap(int cpuid)
{
#ifdef CFE
int error;
if ((error = cfe_cpu_start(cpuid, mpentry, 0, 0, 0))) {
printf("cfe_cpu_start error: %d\n", error);
return (-1);
} else {
return (0);
}
#else
return (-1);
#endif /* CFE */
}
#endif /* SMP */
static u_int
sb_get_timecount(struct timecounter *tc)
{
return ((u_int)sb_zbbus_cycle_count());
}
static void
sb_timecounter_init(void)
{
static struct timecounter sb_timecounter = {
sb_get_timecount,
NULL,
~0u,
0,
"sibyte_zbbus_counter",
2000
};
/*
* The ZBbus cycle counter runs at half the cpu frequency.
*/
sb_timecounter.tc_frequency = sb_cpu_speed() / 2;
platform_timecounter = &sb_timecounter;
}
void
platform_start(__register_t a0, __register_t a1, __register_t a2,
__register_t a3)
{
/*
* Make sure that kseg0 is mapped cacheable-coherent
*/
kseg0_map_coherent();
/* clear the BSS and SBSS segments */
memset(&edata, 0, (vm_offset_t)&end - (vm_offset_t)&edata);
mips_postboot_fixup();
sb_intr_init(0);
sb_timecounter_init();
/* Initialize pcpu stuff */
mips_pcpu0_init();
#ifdef CFE
/*
* Initialize CFE firmware trampolines before
* we initialize the low-level console.
*
* CFE passes the following values in registers:
* a0: firmware handle
* a2: firmware entry point
* a3: entry point seal
*/
if (a3 == CFE_EPTSEAL)
cfe_init(a0, a2);
#endif
cninit();
mips_init();
mips_timer_init_params(sb_cpu_speed(), 0);
}