FreeBSD src
Go to file
Bruce Evans 8bae6e480d Fix removal of mouse image by the vga planar renderer in the right border
in unusual cases.  Optimize and significantly clean up removal in this
renderer.  Optimize removal in the vga direct renderer.

Removal only needs to be done in the border (the part with pixels) in
both cases.  The planar renderer used the condition scp->xoff > 0 to
test whether a right border exists.  This actually tests for a left
border, and when the total horizontal border is 8 pixels, rounding gives
only a right border.  This was the unusual broken case.  An example
is easy to configure using something like "vidcontrol -f 8x16 iso-8x16
-g 79x25 MODE_27".

Optimize the planar case a little by only removing 9x13 active pixels
out of 16x16.  Optimize it a lot by not doing anything if there is no
overlap with the border.  Don't unroll the main loop or hard-code so
many assumptions about font sizes in it.  On my Haswell system, graphics
memory and i/o accesses takes about 520 cycles each so optimizations from
unrolling are in the noise.

Optimize the direct case to not do anything if there is no overlap with
the border.  Do a sanity check on the saveunder's coordinates.  This
requires a previous change to pass non-rounded coordinates.
2017-04-12 18:52:06 +00:00
bin sh: Add test for unaliasing an alias that is currently in use. 2017-04-08 21:57:59 +00:00
cddl MFV r316693: 2017-04-10 22:56:38 +00:00
contrib Fix build with LLD by removing duplicate symbols already in IBVERBS_1.0. 2017-04-10 21:26:37 +00:00
crypto Fix linking with lld by marking OPENSSL_armcap_P as hidden. 2017-04-07 12:41:57 +00:00
etc Revert r316487. It is broken, causing boot to fail due to line 25 in 2017-04-06 12:52:05 +00:00
gnu Temporary readd GNU diff 2017-03-19 17:19:59 +00:00
include Implement the memset_s(3) function as specified by the C11 ISO/IEC 2017-03-30 04:57:26 +00:00
kerberos5 kerberos5: normalize paths using SRCTOP-relative paths or :H when possible 2017-03-04 11:34:36 +00:00
lib 8046 Let calloc() do the multiplication in libzfs_fru_refresh 2017-04-10 22:46:34 +00:00
libexec Emply contemporary function prototypes in bootpd, rather than relying on 2017-03-26 14:37:12 +00:00
release - Increase the image size for RPI2 and IMX6-based boards from 1G 2017-04-07 16:55:13 +00:00
rescue Fix linking /rescue/rescue to multiple programs in usr.bin after r315113 2017-03-20 22:33:22 +00:00
sbin Work around an issue with mksnap_ffs not working in chroot'ed environment. 2017-04-11 21:55:39 +00:00
secure Upgrade to OpenSSH 7.4p1. 2017-03-06 01:37:05 +00:00
share OpenBSD 6.1 release added. 2017-04-12 11:41:35 +00:00
sys Fix removal of mouse image by the vga planar renderer in the right border 2017-04-12 18:52:06 +00:00
targets META_MODE: add additional reachover relative paths to DIRDEPS_BUILD 2017-04-07 07:46:21 +00:00
tests Remove the unportable -msse4 here too after fixing crc32_sse42.c to not 2017-04-02 09:24:58 +00:00
tools makeman: don't copy $FreeBSD$ tags from source files into output 2017-04-11 17:01:20 +00:00
usr.bin add a stub --speed-large-files for compatibility with GNU diff 2017-04-08 08:46:02 +00:00
usr.sbin Do not register in CTL portal groups without portals. 2017-04-10 10:38:12 +00:00
.arcconfig callsign isn't required anymore 2016-09-29 06:19:45 +00:00
.arclint phabricator related changes: 2015-04-20 20:33:22 +00:00
COPYRIGHT Bump copyright year. 2016-12-31 12:41:42 +00:00
LOCKS
MAINTAINERS As suggested by several people, note that I prefer to communicate by email. 2017-03-03 20:23:21 +00:00
Makefile Include RISC-V target to universe build. 2017-04-12 10:45:19 +00:00
Makefile.inc1 Introduce LLD_BOOTSTRAP to control lld as bootstrap linker 2017-04-09 01:35:19 +00:00
Makefile.libcompat META_MODE: Fix build-tools still sometimes rebuilding during target build. 2017-04-06 18:21:59 +00:00
ObsoleteFiles.inc Fix typos to stop removing new files. 2017-04-01 19:08:22 +00:00
README README: remove nonexistent 'games' directory. 2016-05-18 10:43:13 +00:00
README.md Remove hard line breaks from README.md 2017-03-01 15:39:58 +00:00
UPDATING do not require binutils port when using lld as ld 2017-04-07 23:37:22 +00:00

FreeBSD Source:

This is the top level of the FreeBSD source directory. This file was last revised on: FreeBSD

For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information).

The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7) and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables.

The buildkernel and installkernel targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process. See build(7), config(8), and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information.

Note: If you want to build and install the kernel with the buildkernel and installkernel targets, you might need to build world before. More information is available in the handbook.

The kernel configuration files reside in the sys/<arch>/conf sub-directory. GENERIC is the default configuration used in release builds. NOTES contains entries and documentation for all possible devices, not just those commonly used.

Source Roadmap:

bin				System/user commands.

cddl			Various commands and libraries under the Common Development  
				and Distribution License.

contrib			Packages contributed by 3rd parties.

crypto			Cryptography stuff (see crypto/README).

etc				Template files for /etc.

gnu				Various commands and libraries under the GNU Public License.  
				Please see gnu/COPYING* for more information.

include			System include files.

kerberos5		Kerberos5 (Heimdal) package.

lib				System libraries.

libexec			System daemons.

release			Release building Makefile & associated tools.

rescue			Build system for statically linked /rescue utilities.

sbin			System commands.

secure			Cryptographic libraries and commands.

share			Shared resources.

sys				Kernel sources.

tests			Regression tests which can be run by Kyua.  See tests/README
				for additional information.

tools			Utilities for regression testing and miscellaneous tasks.

usr.bin			User commands.

usr.sbin		System administration commands.

For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see:

http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html