freebsd-dev/sys/i386/isa
1995-02-14 14:37:53 +00:00
..
ic Add the Cyclades serial driver code (ALPHA) from Andrew Werple and 1995-02-09 09:47:31 +00:00
pcvt Bring pcvt console driver into the tree - now users can chose whichever 1995-02-05 11:01:24 +00:00
sound The following patches are for the sound drivers. These changes will 1995-02-13 22:49:06 +00:00
aha1542.c Split byte packing functions into signed and unsigned versions. 1995-01-31 11:41:47 +00:00
aha1742.c Expand the EISA MAX_SLOTS from 8 to 16. 1994-11-26 23:10:03 +00:00
aha2742.c Make the sequencer code a .c file instead of a .h file. 1994-11-18 08:14:16 +00:00
aic6360.c The previous revision forgot to define fatal_if_no_DDB() when there is DDB. 1994-11-16 02:45:36 +00:00
aic7770.c Add $Id 1995-01-16 16:31:34 +00:00
b004.c From: Luigi Rizzo <luigi@labinfo.iet.unipi.it> 1994-12-31 12:32:59 +00:00
b004.h Add the transputer driver from Christoph Niemann, Luigi Rizzo and 1994-09-21 01:29:41 +00:00
bt742a.c I noticed some weird english had crept in - fix it up a bit. 1994-11-08 02:53:42 +00:00
clock.c Submitted by: Bruce Evans 1995-01-19 22:05:27 +00:00
cronyx.c Fix bogus and broken include paths: 1994-12-04 08:51:58 +00:00
ctx.c Finished device configuration database work for all ISA devices (except `ze') 1994-10-23 21:28:03 +00:00
ctxreg.h Added Cortex-I Frame Grabber by Paul S. LaFollette, Jr. 1994-10-01 17:59:42 +00:00
cx.c Fix bogus and broken include paths: 1994-12-04 08:51:58 +00:00
cxreg.h Cronyx/Sigma sync/async serial driver with PPP support 1994-12-02 23:23:01 +00:00
cy.c Add the Cyclades serial driver code (ALPHA) from Andrew Werple and 1995-02-09 09:47:31 +00:00
diskslice_machdep.c Fixed $Id$ 1995-01-23 02:31:53 +00:00
elink.c Include <i386/include/cpufunc.h> to have outb() defined ... 1994-09-17 16:51:47 +00:00
elink.h Reviewed by: 1994-08-24 22:32:44 +00:00
fd.c Back out my previous change and disable the floppy tape controller again 1995-01-27 20:03:07 +00:00
fdc.h Peter's work to work around one of the most annoying bugs in the 1995-01-06 15:20:00 +00:00
fdreg.h An ifdef almost hit where it was supposed to go. Joerg owes me a good 1994-09-25 23:37:38 +00:00
ft.c >Originator: Gene Stark 1994-12-04 03:10:09 +00:00
ftreg.h Moved the ft.c from 1.1.5.1 over. It works on my Conner thingie. Got 1994-09-25 06:04:25 +00:00
gpib.c Fix a few nasties in the conversion. 1994-12-17 08:36:50 +00:00
gpib.h Add Fred Cawthorne's GPIB driver. 1994-12-17 08:07:03 +00:00
gpibreg.h Add Fred Cawthorne's GPIB driver. 1994-12-17 08:07:03 +00:00
gsc.c Add a MIN macro. 1995-01-09 11:38:40 +00:00
gscreg.h Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s 1995-01-07 14:52:08 +00:00
icu.h Laptop Advanced Power Management support by HOSOKAWA Tatsumi. 1994-10-01 02:56:21 +00:00
icu.s Rewrite the netisr dispatcher. 1995-02-08 21:46:44 +00:00
if_cx.c Fix bogus and broken include paths: 1994-12-04 08:51:58 +00:00
if_ed.c Much better fix/support for the 83c795 based cards (the new SMC EtherEZ) 1995-01-23 19:06:08 +00:00
if_edreg.h Much better fix/support for the 83c795 based cards (the new SMC EtherEZ) 1995-01-23 19:06:08 +00:00
if_el.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_elreg.h Added $Id$ 1994-08-02 07:55:43 +00:00
if_ep.c Added Andres Vega Garcia's email address. 1995-01-24 20:53:45 +00:00
if_epreg.h Andres Vega Garcia's improvements to the ep driver. This driver is a merging 1994-11-13 10:12:37 +00:00
if_ie507.h Reviewed by: 1994-08-24 22:32:44 +00:00
if_ie.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_iereg.h > Gcc2 generates memcpy calls when doing some structure copying in the 1993-10-12 06:52:34 +00:00
if_is.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_isreg.h Added new probe code to detect generic lance based cards. Should now 1994-01-31 16:00:53 +00:00
if_le.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_lnc.c Fixed problem passing received packets to bpf. 1995-02-02 04:07:45 +00:00
if_lnc.h New AMD family ethernet driver. Should support BICC,NE2100, TNIC, 1994-10-02 21:14:38 +00:00
if_ze.c if_ze was not updated when the arp_ifinit stuff was done. now it is. 1995-01-23 18:02:32 +00:00
if_zereg.h This is the IBM/National PCMCIA ethernet driver from Keith Moore, 1994-06-16 05:32:10 +00:00
isa_device.h Add extra id_enabled flag for userconfig to manipulate. If id_enabled 1994-11-03 04:15:04 +00:00
isa.c Add extra id_enabled flag for userconfig to manipulate. If id_enabled 1994-11-03 04:15:04 +00:00
isa.h Changed address of the game controller to 0x201 (was 0x200) 1995-01-25 20:11:51 +00:00
iso8859.font Changed header slightly. 1994-09-29 08:29:21 +00:00
joy.c Add parentheses around macros! 1995-01-29 01:00:14 +00:00
kbd.h Made all header files idempotent and moved incorrect common data from 1993-11-07 17:44:34 +00:00
kbdtables.h Reviewed by: 1995-01-30 21:36:32 +00:00
lpt.c Fix a panic I might have seen, or at least could see some day if I havn't 1994-11-16 06:09:29 +00:00
lptreg.h Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some 1993-10-16 13:48:52 +00:00
mcd.c Use double speed read for FX001D, now this drive 1995-01-30 06:44:40 +00:00
mcdreg.h Use double speed read for FX001D, now this drive 1995-01-30 06:44:40 +00:00
mse.c From: Lars Fredriksen <fredriks@mcs.com> 1994-11-08 05:41:34 +00:00
ncr5380.c New and far better NCR5380/NCR53400 scsi-driver. 1995-01-27 07:49:19 +00:00
npx.c Use sufficient parentheses in macros. 1995-01-03 04:00:06 +00:00
npx.c.orig New AMD family ethernet driver. Should support BICC,NE2100, TNIC, 1994-10-02 21:14:38 +00:00
pas.c Finished device configuration database work for all ISA devices (except `ze') 1994-10-23 21:28:03 +00:00
pcaudio.c Abort writes if a signal is received (don't ignore the value returned by 1994-11-06 00:46:21 +00:00
pcibus.c Initialisation of interrupt masks changed. 1995-02-09 20:16:19 +00:00
psm.c Removed inclusion of pio.h and cpufunc.h (cpufunc.h is included from 1994-09-16 13:33:56 +00:00
readMBR.c Undo a previous change. <sys/disklabel.h> was broken, not these files. 1994-11-14 13:22:52 +00:00
README.le Fixed a mis-spelling. 1994-11-13 21:19:18 +00:00
rtc.h Here is a minor patch for FreeBSD 2.0R to allow it to recognize 1994-12-04 20:22:20 +00:00
seagate.c Latest update from Serge Vakulenko <vak@cronyx.ru> 1995-01-10 11:41:28 +00:00
sio.c Submitted by: Bill Paul (wpaul@ctr.columbia.edu) 1995-01-20 07:34:18 +00:00
sioreg.h Submitted by: Bill Paul (wpaul@ctr.columbia.edu) 1995-01-20 07:34:18 +00:00
spigot.c The very minimum driver required to support a Video Spigot. See the 1995-02-06 23:20:17 +00:00
spkr.c Fix hanging while playing very short notes. 1995-02-03 10:19:38 +00:00
syscons.c Fixed cursor xor problem... 1995-02-14 14:37:53 +00:00
timerreg.h Removed all patch kit headers, sccsid and rcsid strings, put $Id$ in, some 1993-10-16 13:48:52 +00:00
tw.c Add tw.c for the X10 driver. 1994-10-22 09:55:02 +00:00
ultra14f.c Submitted by: Steve Gerakines 1995-01-07 23:23:40 +00:00
vector.s i386/exception.s, 1994-12-03 10:03:19 +00:00
wd7000.c Split byte packing functions into signed and unsigned versions. 1995-01-31 11:41:47 +00:00
wd.c Support 32bit access to IDE disks, if it seems to work for the drive. 1995-02-04 19:39:36 +00:00
wdreg.h New wd driver, based on Bruce Evans 'wx/altwd' driver which has passed 1994-01-04 20:05:26 +00:00
wt.c fix for: kern/97: wt DELAY patch 1995-01-09 17:55:10 +00:00
wtreg.h wt.c - version 1.3 1993-12-13 18:38:44 +00:00

$Id: README.le,v 1.1 1994/10/01 20:15:43 wollman Exp $

----------------

This driver is in no way supported by Digital Equipment.  See the
disclaimers in the sources for more.

This driver supports all the DEC EtherWORKS III NICs (DE203, DE204,
and DE205) and the later DEC EtherWORKS II NICs (DE200, DE201, DE202,
DE422).  DEPCA-style boards prior to the DE200 have not been tested
and may not work.  

This driver is not EISA aware.  If you are using a DE422 or have
configured the EtherWORKS III in EISA mode, make sure you specify
the I/O port properly as this driver will *not* probe for it.
(The I/O port should be 0xNc00 where N is the EISA slot number).

This driver does not yet use the full 128KB allowed by the DE422.
Someday, it might. For EtherWORKS III NICs, the driver will override
the EEPROM setting of MemoryMode and *always* use the 2K for best
results.

The driver includes full support for both BPF and IP Multicast.

[All paths are relative to the top of sys source area, usually
/usr/src/sys.]

The following files need to be moved into their respective
directories:

	if_le.c	   -->	i386/isa
	am7990.h   -->	i386/isa/ic
	lemac.h	   -->	i386/isa/ic

You will need to apply the patch provided in pat.files.i386 to
i386/conf/files.i386 file.

After that is done you will need to edit your config file (in
i386/conf) and a line similar to:

device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr

[The above line assumes the board is still at the factory defaults.]
Change the port, irq, and iomem value if needed to your configuration.

Now you are ready to rebuild your kernel, reboot, and see if the
driver can configure your board.  When the system boots, you will
hopefully something close to:

    EtherWORKS II:

	le0 at 0x300-0x30f irq 5 maddr 0xd0000 msize 65536 on isa
	le0: DE202 ethernet address 08:00:2b:2d:c8:45
	bpf: le0 attached

    EtherWORKS III:

	le0 at 0x320-0x33f irq 5 maddr 0xd0000 msize 2048 on isa
	le0: DE205-AB ethernet address 08:00:2b:bb:23:e0
	le0 attached

in the startup log.  If so, the board configured properly and
should be ready to use.

--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/