freebsd-dev/Makefile.inc1
Joseph Koshy 07e5ffba6a Catch typos in the kernel name specified for an "installkernel" invocation
early on, rather than failing later with an obscure error message.

Make error messages appear consistent.
2003-02-07 07:29:57 +00:00

815 lines
24 KiB
Makefile

#
# $FreeBSD$
#
# Make command line options:
# -DMAKE_KERBEROS4 to build KerberosIV
# -DMAKE_KERBEROS5 to build Kerberos5
# -DNOCLEANDIR run ${MAKE} clean, instead of ${MAKE} cleandir
# -DNOCLEAN do not clean at all
# -DNOCRYPT will prevent building of crypt versions
# -DNOPROFILE do not build profiled libraries
# -DNOSECURE do not go into secure subdir
# -DNOGAMES do not go into games subdir
# -DNOSHARE do not go into share subdir
# -DNOINFO do not make or install info files
# -DNOLIBC_R do not build libc_r.
# -DNO_FORTRAN do not build g77 and related libraries.
# -DNO_KERNELCONFIG do not run config in ${MAKE} buildkernel
# -DNO_KERNELCLEAN do not run ${MAKE} clean in ${MAKE} buildkernel
# -DNO_KERNELDEPEND do not run ${MAKE} depend in ${MAKE} buildkernel
# -DNO_PORTSUPDATE do not update ports in ${MAKE} update
# -DNO_DOCUPDATE do not update doc in ${MAKE} update
# LOCAL_DIRS="list of dirs" to add additional dirs to the SUBDIR list
# TARGET_ARCH="arch" to crossbuild world to a different arch
#
# The intended user-driven targets are:
# buildworld - rebuild *everything*, including glue to help do upgrades
# installworld- install everything built by "buildworld"
# update - convenient way to update your source tree (eg: sup/cvs)
# most - build user commands, no libraries or include files
# installmost - install user commands, no libraries or include files
#
# Standard targets (not defined here) are documented in the makefiles in
# /usr/share/mk. These include:
# obj depend all install clean cleandepend cleanobj
# Put initial settings here.
SUBDIR=
# We must do share/info early so that installation of info `dir'
# entries works correctly. Do it first since it is less likely to
# grow dependencies on include and lib than vice versa.
.if exists(${.CURDIR}/share/info)
SUBDIR+= share/info
.endif
.if exists(${.CURDIR}/include)
SUBDIR+= include
.endif
.if exists(${.CURDIR}/lib)
SUBDIR+= lib
.endif
.if exists(${.CURDIR}/bin)
SUBDIR+= bin
.endif
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
SUBDIR+= games
.endif
.if exists(${.CURDIR}/gnu)
SUBDIR+= gnu
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS4)
SUBDIR+= kerberosIV
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && !defined(NO_OPENSSL) && defined(MAKE_KERBEROS5)
SUBDIR+= kerberos5
.endif
.if exists(${.CURDIR}/libexec)
SUBDIR+= libexec
.endif
.if exists(${.CURDIR}/sbin)
SUBDIR+= sbin
.endif
.if exists(${.CURDIR}/secure) && !defined(NOCRYPT) && !defined(NOSECURE)
SUBDIR+= secure
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
SUBDIR+= share
.endif
.if exists(${.CURDIR}/sys)
SUBDIR+= sys
.endif
.if exists(${.CURDIR}/usr.bin)
SUBDIR+= usr.bin
.endif
.if exists(${.CURDIR}/usr.sbin)
SUBDIR+= usr.sbin
.endif
# etc must be last for "distribute" to work
.if exists(${.CURDIR}/etc)
SUBDIR+= etc
.endif
# These are last, since it is nice to at least get the base system
# rebuilt before you do them.
.if defined(LOCAL_DIRS)
.for _DIR in ${LOCAL_DIRS}
.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile)
SUBDIR+= ${_DIR}
.endif
.endfor
.endif
.if defined(SUBDIR_OVERRIDE)
SUBDIR= ${SUBDIR_OVERRIDE}
.endif
.if defined(NOCLEANDIR)
CLEANDIR= clean cleandepend
.else
CLEANDIR= cleandir
.endif
CVS?= cvs
SUP?= /usr/local/bin/cvsup
SUPFLAGS?= -g -L 2 -P -
.if defined(SUPHOST)
SUPFLAGS+= -h ${SUPHOST}
.endif
MAKEOBJDIRPREFIX?= /usr/obj
OSRELDATE!= sysctl -n kern.osreldate
TARGET_ARCH?= ${MACHINE_ARCH}
.if ${TARGET_ARCH} == ${MACHINE_ARCH}
TARGET?= ${MACHINE}
TARGET_CPUTYPE?=${CPUTYPE}
.else
TARGET?= ${TARGET_ARCH}
TARGET_CPUTYPE?=
.endif
.if !empty(TARGET_CPUTYPE)
_TARGET_CPUTYPE=${TARGET_CPUTYPE}
.else
_TARGET_CPUTYPE=dummy
.endif
_CPUTYPE!= ${MAKE} -f /dev/null -m ${.CURDIR}/share/mk \
CPUTYPE=${_TARGET_CPUTYPE} -V CPUTYPE
.if ${_CPUTYPE} != ${_TARGET_CPUTYPE}
.error CPUTYPE global should be set with ?=.
.endif
.if make(buildworld)
BUILD_ARCH!= sysctl -n hw.machine_arch
.if ${MACHINE_ARCH} != ${BUILD_ARCH}
.error To cross-build, set TARGET_ARCH.
.endif
.endif
.if ${MACHINE} == ${TARGET}
OBJTREE= ${MAKEOBJDIRPREFIX}
.else
OBJTREE= ${MAKEOBJDIRPREFIX}/${TARGET}
.endif
WORLDTMP= ${OBJTREE}${.CURDIR}/${MACHINE_ARCH}
# /usr/games added for fortune which depend on strfile
STRICTTMPPATH= ${WORLDTMP}/usr/sbin:${WORLDTMP}/usr/bin:${WORLDTMP}/usr/games
TMPPATH= ${STRICTTMPPATH}:${PATH}
INSTALLTMP!= /usr/bin/mktemp -d -u -t install
#
# Building a world goes through the following stages
#
# 1. bootstrap-tool stage [BMAKE]
# This stage is responsible for creating programs that
# are needed for backward compatibility reasons. They
# are not built as cross-tools.
# 2. build-tool stage [TMAKE]
# This stage is responsible for creating the object
# tree and building any tools that are needed during
# the build process.
# 3. cross-tool stage [XMAKE]
# This stage is responsible for creating any tools that
# are needed for cross-builds. A cross-compiler is one
# of them.
# 4. world stage [WMAKE]
# This stage actually builds the world.
# 5. install stage (optional) [IMAKE]
# This stage installs a previously built world.
#
# Common environment for world related stages
CROSSENV= MAKEOBJDIRPREFIX=${OBJTREE} \
MACHINE_ARCH=${TARGET_ARCH} \
MACHINE=${TARGET} \
CPUTYPE=${TARGET_CPUTYPE} \
GROFF_BIN_PATH=${WORLDTMP}/usr/bin \
GROFF_FONT_PATH=${WORLDTMP}/usr/share/groff_font \
GROFF_TMAC_PATH=${WORLDTMP}/usr/share/tmac
# bootstrap-tool stage
BMAKEENV= MAKEOBJDIRPREFIX=${WORLDTMP} \
DESTDIR= \
INSTALL="sh ${.CURDIR}/tools/install.sh"
BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 \
BOOTSTRAPPING=${OSRELDATE} \
-DNOHTML -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \
-DNO_CPU_CFLAGS -DNO_WERROR
# build-tool stage
TMAKEENV= MAKEOBJDIRPREFIX=${OBJTREE} \
DESTDIR= \
INSTALL="sh ${.CURDIR}/tools/install.sh"
TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 \
BOOTSTRAPPING=${OSRELDATE} -DNO_CPU_CFLAGS
# cross-tool stage
XMAKE= TOOLS_PREFIX=${WORLDTMP} ${BMAKE} -DNO_FORTRAN -DNO_GDB
# world stage
WMAKEENV= ${CROSSENV} \
DESTDIR=${WORLDTMP} \
INSTALL="sh ${.CURDIR}/tools/install.sh" \
PATH=${TMPPATH}
WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1
# install stage
IMAKEENV= ${CROSSENV} \
PATH=${STRICTTMPPATH}:${INSTALLTMP}
IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1
# kernel stage
KMAKEENV= ${WMAKEENV}
USRDIRS= usr/bin usr/lib/compat/aout usr/games usr/libdata/ldscripts \
usr/libexec usr/sbin usr/share/misc \
usr/share/dict \
usr/share/groff_font/devX100 \
usr/share/groff_font/devX100-12 \
usr/share/groff_font/devX75 \
usr/share/groff_font/devX75-12 \
usr/share/groff_font/devascii \
usr/share/groff_font/devcp1047 \
usr/share/groff_font/devdvi \
usr/share/groff_font/devhtml \
usr/share/groff_font/devkoi8-r \
usr/share/groff_font/devlatin1 \
usr/share/groff_font/devlbp \
usr/share/groff_font/devlj4 \
usr/share/groff_font/devps \
usr/share/groff_font/devutf8 \
usr/share/tmac/mdoc usr/share/tmac/mm
INCDIRS= arpa dev fs g++/backward g++/bits g++/ext isc isofs libmilter \
objc openssl protocols readline rpc rpcsvc security ufs
#
# buildworld
#
# Attempt to rebuild the entire system, with reasonable chance of
# success, regardless of how old your existing system is.
#
_worldtmp:
.if ${.CURDIR:C/[^,]//g} != ""
# The m4 build of sendmail files doesn't like it if ',' is used
# anywhere in the path of it's files.
@echo
@echo "*** Error: path to source tree contains a comma ','"
@echo
@false
.endif
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding the temporary build tree"
@echo "--------------------------------------------------------------"
.if !defined(NOCLEAN)
rm -rf ${WORLDTMP}
.else
# XXX - These two can depend on any header file.
rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c
rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c
.endif
.for _dir in ${USRDIRS}
mkdir -p ${WORLDTMP}/${_dir}
.endfor
.for _dir in ${INCDIRS}
mkdir -p ${WORLDTMP}/usr/include/${_dir}
.endfor
ln -sf ${.CURDIR}/sys ${WORLDTMP}
_bootstrap-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 1: bootstrap tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${BMAKE} bootstrap-tools
_cleanobj:
.if !defined(NOCLEAN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: cleaning up the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/}
.endif
_obj:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: rebuilding the object tree"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} par-obj
_build-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 2: build tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${TMAKE} build-tools
_cross-tools:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 3: cross tools"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${XMAKE} cross-tools
_includes:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: populating ${WORLDTMP}/usr/include"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes
_libraries:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building libraries"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries
_depend:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: make dependencies"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} par-depend
everything:
@echo
@echo "--------------------------------------------------------------"
@echo ">>> stage 4: building everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${WMAKE} all
WMAKE_TGTS=
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+= _worldtmp _bootstrap-tools
.endif
WMAKE_TGTS+= _cleanobj _obj _build-tools
.if !defined(SUBDIR_OVERRIDE)
WMAKE_TGTS+= _cross-tools
.endif
WMAKE_TGTS+= _includes _libraries _depend everything
buildworld: ${WMAKE_TGTS}
.ORDER: ${WMAKE_TGTS}
#
# installcheck
#
# Checks to be sure system is ready for installworld
#
installcheck:
.if !defined(NO_SENDMAIL)
@if ! `grep -q '^smmsp:' /etc/passwd`; then \
echo "ERROR: Required smmsp user is missing, see /usr/src/UPDATING."; \
false; \
fi
@if ! `grep -q '^smmsp:' /etc/group`; then \
echo "ERROR: Required smmsp group is missing, see /usr/src/UPDATING."; \
false; \
fi
.endif
.if ${TARGET_ARCH} == ${MACHINE_ARCH} && !defined(DISTDIR) && \
(!defined(DESTDIR) || empty(DESTDIR) || ${DESTDIR} == "/")
@echo "Checking to see if your booted kernel is fresh enough.."
${.OBJDIR}/bin/sh/sh -c \
'echo "Testing installed kernel for new sigaction(2) syscall"'
@echo "Seems ok.."
.endif
#
# distributeworld
#
# Distributes everything compiled by a `buildworld'.
#
# installworld
#
# Installs everything compiled by a 'buildworld'.
#
distributeworld installworld: installcheck
mkdir -p ${INSTALLTMP}
for prog in [ awk cat chflags chmod chown date echo egrep find grep \
ln make mkdir mtree mv pwd_mkdb rm sed sh sysctl \
test true uname wc zic; do \
cp `which $$prog` ${INSTALLTMP}; \
done
cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//}
rm -rf ${INSTALLTMP}
#
# reinstall
#
# If you have a build server, you can NFS mount the source and obj directories
# and do a 'make reinstall' on the *client* to install new binaries from the
# most recent server build.
#
reinstall:
@echo "--------------------------------------------------------------"
@echo ">>> Making hierarchy"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Installing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install
.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN)
@echo
@echo "--------------------------------------------------------------"
@echo ">>> Rebuilding man page indices"
@echo "--------------------------------------------------------------"
cd ${.CURDIR}/share/man; ${MAKE} makedb
.endif
redistribute:
@echo "--------------------------------------------------------------"
@echo ">>> Distributing everything.."
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 distribute
#
# buildkernel and installkernel
#
# Which kernels to build and/or install is specified by setting
# KERNCONF. If not defined a GENERIC kernel is built/installed.
# Only the existing (depending TARGET) config files are used
# for building kernels and only the first of these is designated
# as the one being installed.
#
# Note that we have to use TARGET instead of TARGET_ARCH when
# we're in kernel-land. Since only TARGET_ARCH is (expected) to
# be set to cross-build, we have to make sure TARGET is set
# properly.
.if !defined(KERNCONF) && defined(KERNEL)
KERNCONF= ${KERNEL}
KERNWARN= yes
.else
KERNCONF?= GENERIC
.endif
INSTKERNNAME?= kernel
KRNLSRCDIR= ${.CURDIR}/sys
KRNLCONFDIR= ${KRNLSRCDIR}/${TARGET}/conf
KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR}
KERNCONFDIR?= ${KRNLCONFDIR}
BUILDKERNELS=
INSTALLKERNEL=
.for _kernel in ${KERNCONF}
.if exists(${KERNCONFDIR}/${_kernel})
BUILDKERNELS+= ${_kernel}
.if empty(INSTALLKERNEL)
INSTALLKERNEL= ${_kernel}
.endif
.endif
.endfor
#
# buildkernel
#
# Builds all kernels defined by BUILDKERNELS.
#
buildkernel:
.if empty(BUILDKERNELS)
@echo "ERROR: Missing kernel configuration file(s) (${KERNCONF}).";
@false
.endif
.if defined(KERNWARN)
@echo "--------------------------------------------------------------"
@echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF="
@echo "--------------------------------------------------------------"
@sleep 3
.endif
@echo
.for _kernel in ${BUILDKERNELS}
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
@echo "===> ${_kernel}"
mkdir -p ${KRNLOBJDIR}
.if !defined(NO_KERNELCONFIG)
cd ${KRNLCONFDIR}; \
PATH=${TMPPATH} \
config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \
${KERNCONFDIR}/${_kernel}
.endif
.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} -DNO_MODULES clean
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} cleandir
.endif
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
MAKESRCPATH=${KRNLSRCDIR}/dev/aic7xxx/aicasm \
${MAKE} -DNO_CPU_CFLAGS -f ${KRNLSRCDIR}/dev/aic7xxx/aicasm/Makefile
.if !defined(MODULES_WITH_WORLD) && !defined(NO_MODULES) && exists(${KRNLSRCDIR}/modules)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} modules-obj
cd ${.CURDIR}/sys/modules/aic7xxx/aicasm; \
MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
${MAKE} -DNO_CPU_CFLAGS depend; \
MAKEOBJDIRPREFIX=${KRNLOBJDIR}/${_kernel}/modules \
${MAKE} -DNO_CPU_CFLAGS all
.endif
.if !defined(NO_KERNELDEPEND)
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend -DNO_MODULES_OBJ
.endif
cd ${KRNLOBJDIR}/${_kernel}; \
${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all -DNO_MODULES_OBJ
@echo "--------------------------------------------------------------"
@echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`"
@echo "--------------------------------------------------------------"
.endfor
#
# installkernel
#
# Install the kernel defined by INSTALLKERNEL
#
installkernel reinstallkernel:
.if empty(INSTALLKERNEL)
@echo "ERROR: No kernel \"${KERNCONF}\" to install."
@false
.endif
cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \
${CROSSENV} PATH=${TMPPATH} \
${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//}
#
# update
#
# Update the source tree, by running sup and/or running cvs to update to the
# latest copy.
#
update:
.if defined(SUP_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Running ${SUP}"
@echo "--------------------------------------------------------------"
.if defined(SUPFILE)
@${SUP} ${SUPFLAGS} ${SUPFILE}
.endif
.if defined(SUPFILE1)
@${SUP} ${SUPFLAGS} ${SUPFILE1}
.endif
.if defined(SUPFILE2)
@${SUP} ${SUPFLAGS} ${SUPFILE2}
.endif
.if defined(PORTSSUPFILE) && !defined(NO_PORTSUPDATE)
@${SUP} ${SUPFLAGS} ${PORTSSUPFILE}
.endif
.if defined(DOCSUPFILE) && !defined(NO_DOCUPDATE)
@${SUP} ${SUPFLAGS} ${DOCSUPFILE}
.endif
.endif
.if defined(CVS_UPDATE)
@echo "--------------------------------------------------------------"
@echo ">>> Updating ${.CURDIR} from cvs repository" ${CVSROOT}
@echo "--------------------------------------------------------------"
cd ${.CURDIR}; ${CVS} -q update -A -P -d
.endif
#
# most
#
# Build most of the user binaries on the existing system libs and includes.
#
most:
@echo "--------------------------------------------------------------"
@echo ">>> Building programs only"
@echo "--------------------------------------------------------------"
.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all
.endfor
#
# installmost
#
# Install the binaries built by the 'most' target. This does not include
# libraries or include files.
#
installmost:
@echo "--------------------------------------------------------------"
@echo ">>> Installing programs only"
@echo "--------------------------------------------------------------"
.for _dir in bin sbin libexec usr.bin usr.sbin gnu/usr.bin gnu/usr.sbin
cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install
.endfor
#
# ------------------------------------------------------------------------
#
# From here onwards are utility targets used by the 'make world' and
# related targets. If your 'world' breaks, you may like to try to fix
# the problem and manually run the following targets to attempt to
# complete the build. Beware, this is *not* guaranteed to work, you
# need to have a pretty good grip on the current state of the system
# to attempt to manually finish it. If in doubt, 'make world' again.
#
#
# bootstrap-tools: Build tools needed for compatibility
#
.if exists(${.CURDIR}/games) && !defined(NOGAMES)
_strfile= games/fortune/strfile
.endif
bootstrap-tools:
.for _tool in ${_strfile} usr.bin/yacc usr.bin/colldef \
usr.bin/makewhatis usr.bin/rpcgen usr.bin/uudecode \
usr.bin/xargs usr.bin/xinstall \
usr.sbin/config usr.sbin/kbdcontrol \
gnu/usr.bin/gperf gnu/usr.bin/groff gnu/usr.bin/texinfo
${ECHODIR} "===> ${_tool}"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
.endfor
#
# build-tools: Build special purpose build tools
#
.if defined(MODULES_WITH_WORLD) && exists(${KRNLSRCDIR}/modules)
_aicasm= sys/modules/aic7xxx/aicasm
.endif
.if exists(${.CURDIR}/share) && !defined(NOSHARE)
_share= share/syscons/scrnmaps
.endif
.if !defined(NO_FORTRAN)
_fortran= gnu/usr.bin/cc/f771
.endif
.if exists(${.CURDIR}/kerberosIV) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_libroken4= kerberosIV/lib/libroken
.endif
.if exists(${.CURDIR}/kerberos5) && exists(${.CURDIR}/crypto) && \
!defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_libkrb5= kerberos5/lib/libroken kerberos5/lib/libvers \
kerberos5/lib/libasn1 kerberos5/lib/libhdb kerberos5/lib/libsl
.endif
build-tools:
.for _tool in bin/csh bin/sh gnu/usr.bin/cc/cc_tools ${_fortran} \
${_libroken4} ${_libkrb5} lib/libncurses ${_share} \
${_aicasm} usr.bin/awk usr.bin/file usr.sbin/sysinstall
${ECHODIR} "===> ${_tool}"; \
cd ${.CURDIR}/${_tool}; ${MAKE} DIRPRFX=${_tool}/ build-tools
.endfor
#
# cross-tools: Build cross-building tools
#
.if ${TARGET_ARCH} == "alpha" && ${MACHINE_ARCH} != "alpha"
_elf2exe= usr.sbin/elf2exe
.endif
.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386"
_btxld= usr.sbin/btxld
.endif
.if ${TARGET_ARCH} == "sparc64"
_elf2aout= usr.bin/elf2aout
.endif
_xlint= usr.bin/xlint/lint1 usr.bin/xlint/lint2 usr.bin/xlint/xlint
cross-tools:
.for _tool in ${_btxld} ${_elf2aout} ${_elf2exe} \
gnu/usr.bin/binutils usr.sbin/crunch/crunchide \
gnu/usr.bin/cc ${_xlint}
${ECHODIR} "===> ${_tool}"; \
cd ${.CURDIR}/${_tool}; \
${MAKE} DIRPRFX=${_tool}/ obj; \
${MAKE} DIRPRFX=${_tool}/ depend; \
${MAKE} DIRPRFX=${_tool}/ all; \
${MAKE} DIRPRFX=${_tool}/ DESTDIR=${MAKEOBJDIRPREFIX} install
.endfor
#
# hierarchy - ensure that all the needed directories are present
#
hierarchy:
cd ${.CURDIR}/etc; ${MAKE} distrib-dirs
#
# libraries - build all libraries, and install them under ${DESTDIR}.
#
# The list of libraries with dependents (${_prebuild_libs}) and their
# interdependencies (__L) are built automatically by the
# ${.CURDIR}/tools/make_libdeps.sh script.
#
libraries:
cd ${.CURDIR}; \
${MAKE} -f Makefile.inc1 _startup_libs; \
${MAKE} -f Makefile.inc1 _prebuild_libs; \
${MAKE} -f Makefile.inc1 _generic_libs;
# These dependencies are not automatically generated:
#
# gnu/lib/csu, gnu/lib/libgcc and lib/csu must be built before all
# shared libraries for ELF.
#
_startup_libs= gnu/lib/csu gnu/lib/libgcc
.if exists(${.CURDIR}/lib/csu/${MACHINE_ARCH}-elf)
_startup_libs+= lib/csu/${MACHINE_ARCH}-elf
.else
_startup_libs+= lib/csu/${MACHINE_ARCH}
.endif
_prebuild_libs=
_generic_libs= gnu/lib
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS5)
_prebuild_libs+= kerberos5/lib/libasn1
_prebuild_libs+= kerberos5/lib/libgssapi
_prebuild_libs+= kerberos5/lib/libkrb5
_prebuild_libs+= kerberos5/lib/libroken
_generic_libs+= kerberos5/lib
.endif
.if !defined(NOCRYPT) && defined(MAKE_KERBEROS4)
_prebuild_libs+= kerberosIV/lib/libkrb
kerberosIV/lib/libkrb__L: lib/libcrypt__L
_generic_libs+= kerberosIV/lib
.endif
_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libkvm lib/libmd \
lib/libncurses lib/libopie lib/libpam lib/libradius \
lib/librpcsvc \
lib/libsbuf lib/libtacplus lib/libutil lib/libypclnt \
lib/libz lib/msun
lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L
lib/libypclnt__L: lib/librpcsvc__L
_generic_libs+= lib
.if !defined(NOCRYPT) && !defined(NOSECURE)
.if !defined(NO_OPENSSL)
_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl
.if !defined(NO_OPENSSH)
_prebuild_libs+= secure/lib/libssh
secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L
.endif
.endif
_generic_libs+= secure/lib
.endif
_generic_libs+= usr.bin/lex/lib
.if ${MACHINE_ARCH} == "i386"
_generic_libs+= usr.sbin/pcvt/keycap
.endif
.for _lib in ${_startup_libs} ${_prebuild_libs:Nlib/libpam} ${_generic_libs}
${_lib}__L: .PHONY
.if exists(${.CURDIR}/${_lib})
${ECHODIR} "===> ${_lib}"; \
cd ${.CURDIR}/${_lib}; \
${MAKE} DIRPRFX=${_lib}/ depend; \
${MAKE} DIRPRFX=${_lib}/ all; \
${MAKE} DIRPRFX=${_lib}/ install
.endif
.endfor
# libpam is special: we need to build static PAM modules before
# static PAM library, and dynamic PAM library before dynamic PAM
# modules.
lib/libpam__L: .PHONY
${ECHODIR} "===> lib/libpam"; \
cd ${.CURDIR}/lib/libpam; \
${MAKE} DIRPRFX=lib/libpam/ depend; \
${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET all; \
${MAKE} DIRPRFX=lib/libpam/ -D_NO_LIBPAM_SO_YET install
_startup_libs: ${_startup_libs:S/$/__L/}
_prebuild_libs: ${_prebuild_libs:S/$/__L/}
_generic_libs: ${_generic_libs:S/$/__L/}
.for __target in clean cleandepend cleandir depend includes obj
.for entry in ${SUBDIR}
${entry}.${__target}__D: .PHONY
@if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \
${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \
edir=${entry}.${MACHINE_ARCH}; \
cd ${.CURDIR}/$${edir}; \
else \
${ECHODIR} "===> ${DIRPRFX}${entry}"; \
edir=${entry}; \
cd ${.CURDIR}/$${edir}; \
fi; \
${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/
.endfor
par-${__target}: ${SUBDIR:S/$/.${__target}__D/}
.endfor
.include <bsd.subdir.mk>