freebsd-dev/sys/dev/mii
Brooks Davis 9bf40ede4a Replace the if_name and if_unit members of struct ifnet with new members
if_xname, if_dname, and if_dunit. if_xname is the name of the interface
and if_dname/unit are the driver name and instance.

This change paves the way for interface renaming and enhanced pseudo
device creation and configuration symantics.

Approved By:	re (in principle)
Reviewed By:	njl, imp
Tested On:	i386, amd64, sparc64
Obtained From:	NetBSD (if_xname)
2003-10-31 18:32:15 +00:00
..
acphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
acphyreg.h
amphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
amphyreg.h
bmtphy.c Add a device driver for the Broadcom BCM4401 ethernet controller, 2003-09-09 18:17:23 +00:00
bmtphyreg.h Add a driver for the Broadcom BCM52xx "mini-theta" PHY. This includes the 2002-07-05 11:07:24 +00:00
brgphy.c Replace the if_name and if_unit members of struct ifnet with new members 2003-10-31 18:32:15 +00:00
brgphyreg.h Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped. 2003-06-17 15:02:28 +00:00
dcphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
e1000phy.c Add support for SK-9521 V2.0 and 3COM 3C940. 2003-09-20 10:53:08 +00:00
e1000phyreg.h Add support for SK-9521 V2.0 and 3COM 3C940. 2003-09-20 10:53:08 +00:00
exphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
inphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
inphyreg.h
lxtphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
lxtphyreg.h
mii_physubr.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
mii.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
mii.h Move a lot closer to NetBSDs MII support for GigE. 2002-04-29 11:57:30 +00:00
miibus_if.m
miidevs Add support for SK-9521 V2.0 and 3COM 3C940. 2003-09-20 10:53:08 +00:00
miivar.h Clean up mii/phy drivers: Remove the MIIF_DOINGAUTO which doesn't really 2002-05-04 11:00:30 +00:00
mlphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
nsgphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
nsgphyreg.h Move a lot closer to NetBSDs MII support for GigE. 2002-04-29 11:57:30 +00:00
nsphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
nsphyreg.h
pnaphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
pnphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
qsphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
qsphyreg.h
rgephy.c Clean up dead code. 2003-09-11 08:28:38 +00:00
rgephyreg.h Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S 2003-09-11 03:53:46 +00:00
rlphy.c Take the support for the 8139C+/8169/8169S/8110S chips out of the 2003-09-08 02:11:25 +00:00
ruephy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
ruephyreg.h Add RealTek RTL8150 USB to fast Ethernet controller driver. 2003-05-03 10:16:56 +00:00
tdkphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
tdkphyreg.h
tlphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
tlphyreg.h
ukphy_subr.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
ukphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
xmphy.c Use __FBSDID(). 2003-08-24 17:55:58 +00:00
xmphyreg.h Fix reversed definitions for the bits that select half vs. full duplex. 2002-01-10 18:06:41 +00:00