freebsd-dev/sys/dev/ral/rt2661var.h
Sam Leffler 68e8e04e93 Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
  fully enumerated and uniquely identify the operating characteristics;
  these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
  background scanning and roaming
o move scanning support into loadable modules based on the operating
  mode to enable different policies and reduce the memory footprint
  on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
  mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
  we use a simple algorithm to trigger a roam: we threshold the rssi
  and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
  drivers but is incomplete; it's included now to establish a baseline
  for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
  prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
  encapsulation (note this can be used with any card that can tx+rx
  large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
  authentication and association failures
o enable the addition of sta mode power save support for drivers that need
  net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
  results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
  index into the rate set; this needs to be extended to deal with
  multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing

Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
       dynamic turbo (lightly tested), 11n (sniffing only and needs
       new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
       rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested

This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others.  Much of the scanning work was supported by
Atheros.  The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00

179 lines
4.0 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2005
* Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
struct rt2661_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint64_t wr_tsf;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
uint8_t wr_antsignal;
} __packed;
#define RT2661_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_TSFT) | \
(1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_DB_ANTSIGNAL))
struct rt2661_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint8_t wt_rate;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
} __packed;
#define RT2661_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL))
struct rt2661_tx_data {
bus_dmamap_t map;
struct mbuf *m;
struct ieee80211_node *ni;
struct ral_rssdesc id;
};
struct rt2661_tx_ring {
bus_dma_tag_t desc_dmat;
bus_dma_tag_t data_dmat;
bus_dmamap_t desc_map;
bus_addr_t physaddr;
struct rt2661_tx_desc *desc;
struct rt2661_tx_data *data;
int count;
int queued;
int cur;
int next;
int stat;
};
struct rt2661_rx_data {
bus_dmamap_t map;
struct mbuf *m;
};
struct rt2661_rx_ring {
bus_dma_tag_t desc_dmat;
bus_dma_tag_t data_dmat;
bus_dmamap_t desc_map;
bus_addr_t physaddr;
struct rt2661_rx_desc *desc;
struct rt2661_rx_data *data;
int count;
int cur;
int next;
};
struct rt2661_node {
struct ieee80211_node ni;
struct ral_rssadapt rssadapt;
};
struct rt2661_softc {
struct ifnet *sc_ifp;
struct ieee80211com sc_ic;
int (*sc_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
device_t sc_dev;
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
struct mtx sc_mtx;
struct callout watchdog_ch;
struct callout rssadapt_ch;
int sc_tx_timer;
int sc_invalid;
/*
* The same in both up to here
* ------------------------------------------------
*/
struct ieee80211_channel *sc_curchan;
uint8_t rf_rev;
uint8_t rfprog;
uint8_t rffreq;
struct rt2661_tx_ring txq[4];
struct rt2661_tx_ring mgtq;
struct rt2661_rx_ring rxq;
uint32_t rf_regs[4];
int8_t txpow[38];
struct {
uint8_t reg;
uint8_t val;
} bbp_prom[16];
int hw_radio;
int rx_ant;
int tx_ant;
int nb_ant;
int ext_2ghz_lna;
int ext_5ghz_lna;
int rssi_2ghz_corr;
int rssi_5ghz_corr;
uint8_t bbp18;
uint8_t bbp21;
uint8_t bbp22;
uint8_t bbp16;
uint8_t bbp17;
uint8_t bbp64;
int dwelltime;
struct bpf_if *sc_drvbpf;
union {
struct rt2661_rx_radiotap_header th;
uint8_t pad[64];
} sc_rxtapu;
#define sc_rxtap sc_rxtapu.th
int sc_rxtap_len;
union {
struct rt2661_tx_radiotap_header th;
uint8_t pad[64];
} sc_txtapu;
#define sc_txtap sc_txtapu.th
int sc_txtap_len;
#define RAL_INPUT_RUNNING 1
int sc_flags;
};
int rt2661_attach(device_t, int);
int rt2661_detach(void *);
void rt2661_shutdown(void *);
void rt2661_suspend(void *);
void rt2661_resume(void *);
void rt2661_intr(void *);
#define RAL_LOCK(sc) mtx_lock(&(sc)->sc_mtx)
#define RAL_UNLOCK(sc) mtx_unlock(&(sc)->sc_mtx)