d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
8e60fa95cb
freebsd-dev/sys/netinet/ip_fw.h
Andrey V. Elsukov ed22e564b8 Add named dynamic states support to ipfw(4). 
The keep-state, limit and check-state now will have additional argument
flowname. This flowname will be assigned to dynamic rule by keep-state
or limit opcode. And then can be matched by check-state opcode or
O_PROBE_STATE internal opcode. To reduce possible breakage and to maximize
compatibility with old rulesets default flowname introduced.
It will be assigned to the rules when user has omitted state name in
keep-state and check-state opcodes. Also if name is ambiguous (can be
evaluated as rule opcode) it will be replaced to default.

Reviewed by:	julian
Obtained from:	Yandex LLC
MFC after:	1 month
Relnotes:	yes
Sponsored by:	Yandex LLC
Differential Revision:	https://reviews.freebsd.org/D6674
2016-07-19 04:56:59 +00:00

1028 lines
32 KiB
C
Raw Blame History

/*-
* Copyright (c) 2002-2009 Luigi Rizzo, Universita` di Pisa
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IPFW2_H
#define _IPFW2_H
/*
* The default rule number. By the design of ip_fw, the default rule
* is the last one, so its number can also serve as the highest number
* allowed for a rule. The ip_fw code relies on both meanings of this
* constant.
*/
#define IPFW_DEFAULT_RULE 65535
#define RESVD_SET 31 /*set for default and persistent rules*/
#define IPFW_MAX_SETS 32 /* Number of sets supported by ipfw*/
/*
* Compat values for old clients
*/
#ifndef _KERNEL
#define IPFW_TABLES_MAX 65535
#define IPFW_TABLES_DEFAULT 128
#endif
/*
* Most commands (queue, pipe, tag, untag, limit...) can have a 16-bit
* argument between 1 and 65534. The value 0 (IP_FW_TARG) is used
* to represent 'tablearg' value, e.g. indicate the use of a 'tablearg'
* result of the most recent table() lookup.
* Note that 16bit is only a historical limit, resulting from
* the use of a 16-bit fields for that value. In reality, we can have
* 2^32 pipes, queues, tag values and so on.
*/
#define IPFW_ARG_MIN 1
#define IPFW_ARG_MAX 65534
#define IP_FW_TABLEARG 65535 /* Compat value for old clients */
#define IP_FW_TARG 0 /* Current tablearg value */
/*
* Number of entries in the call stack of the call/return commands.
* Call stack currently is an uint16_t array with rule numbers.
*/
#define IPFW_CALLSTACK_SIZE 16
/* IP_FW3 header/opcodes */
typedef struct _ip_fw3_opheader {
uint16_t opcode; /* Operation opcode */
uint16_t version; /* Opcode version */
uint16_t reserved[2]; /* Align to 64-bit boundary */
} ip_fw3_opheader;
/* IP_FW3 opcodes */
#define IP_FW_TABLE_XADD 86 /* add entry */
#define IP_FW_TABLE_XDEL 87 /* delete entry */
#define IP_FW_TABLE_XGETSIZE 88 /* get table size (deprecated) */
#define IP_FW_TABLE_XLIST 89 /* list table contents */
#define IP_FW_TABLE_XDESTROY 90 /* destroy table */
#define IP_FW_TABLES_XLIST 92 /* list all tables */
#define IP_FW_TABLE_XINFO 93 /* request info for one table */
#define IP_FW_TABLE_XFLUSH 94 /* flush table data */
#define IP_FW_TABLE_XCREATE 95 /* create new table */
#define IP_FW_TABLE_XMODIFY 96 /* modify existing table */
#define IP_FW_XGET 97 /* Retrieve configuration */
#define IP_FW_XADD 98 /* add rule */
#define IP_FW_XDEL 99 /* del rule */
#define IP_FW_XMOVE 100 /* move rules to different set */
#define IP_FW_XZERO 101 /* clear accounting */
#define IP_FW_XRESETLOG 102 /* zero rules logs */
#define IP_FW_SET_SWAP 103 /* Swap between 2 sets */
#define IP_FW_SET_MOVE 104 /* Move one set to another one */
#define IP_FW_SET_ENABLE 105 /* Enable/disable sets */
#define IP_FW_TABLE_XFIND 106 /* finds an entry */
#define IP_FW_XIFLIST 107 /* list tracked interfaces */
#define IP_FW_TABLES_ALIST 108 /* list table algorithms */
#define IP_FW_TABLE_XSWAP 109 /* swap two tables */
#define IP_FW_TABLE_VLIST 110 /* dump table value hash */
#define IP_FW_NAT44_XCONFIG 111 /* Create/modify NAT44 instance */
#define IP_FW_NAT44_DESTROY 112 /* Destroys NAT44 instance */
#define IP_FW_NAT44_XGETCONFIG 113 /* Get NAT44 instance config */
#define IP_FW_NAT44_LIST_NAT 114 /* List all NAT44 instances */
#define IP_FW_NAT44_XGETLOG 115 /* Get log from NAT44 instance */
#define IP_FW_DUMP_SOPTCODES 116 /* Dump available sopts/versions */
#define IP_FW_DUMP_SRVOBJECTS 117 /* Dump existing named objects */
#define IP_FW_NPTV6_CREATE 150 /* Create NPTv6 instance */
#define IP_FW_NPTV6_DESTROY 151 /* Destroy NPTv6 instance */
#define IP_FW_NPTV6_CONFIG 152 /* Modify NPTv6 instance */
#define IP_FW_NPTV6_LIST 153 /* List NPTv6 instances */
#define IP_FW_NPTV6_STATS 154 /* Get NPTv6 instance statistics */
/*
* The kernel representation of ipfw rules is made of a list of
* 'instructions' (for all practical purposes equivalent to BPF
* instructions), which specify which fields of the packet
* (or its metadata) should be analysed.
*
* Each instruction is stored in a structure which begins with
* "ipfw_insn", and can contain extra fields depending on the
* instruction type (listed below).
* Note that the code is written so that individual instructions
* have a size which is a multiple of 32 bits. This means that, if
* such structures contain pointers or other 64-bit entities,
* (there is just one instance now) they may end up unaligned on
* 64-bit architectures, so the must be handled with care.
*
* "enum ipfw_opcodes" are the opcodes supported. We can have up
* to 256 different opcodes. When adding new opcodes, they should
* be appended to the end of the opcode list before O_LAST_OPCODE,
* this will prevent the ABI from being broken, otherwise users
* will have to recompile ipfw(8) when they update the kernel.
*/
enum ipfw_opcodes { /* arguments (4 byte each) */
O_NOP,
O_IP_SRC, /* u32 = IP */
O_IP_SRC_MASK, /* ip = IP/mask */
O_IP_SRC_ME, /* none */
O_IP_SRC_SET, /* u32=base, arg1=len, bitmap */
O_IP_DST, /* u32 = IP */
O_IP_DST_MASK, /* ip = IP/mask */
O_IP_DST_ME, /* none */
O_IP_DST_SET, /* u32=base, arg1=len, bitmap */
O_IP_SRCPORT, /* (n)port list:mask 4 byte ea */
O_IP_DSTPORT, /* (n)port list:mask 4 byte ea */
O_PROTO, /* arg1=protocol */
O_MACADDR2, /* 2 mac addr:mask */
O_MAC_TYPE, /* same as srcport */
O_LAYER2, /* none */
O_IN, /* none */
O_FRAG, /* none */
O_RECV, /* none */
O_XMIT, /* none */
O_VIA, /* none */
O_IPOPT, /* arg1 = 2*u8 bitmap */
O_IPLEN, /* arg1 = len */
O_IPID, /* arg1 = id */
O_IPTOS, /* arg1 = id */
O_IPPRECEDENCE, /* arg1 = precedence << 5 */
O_IPTTL, /* arg1 = TTL */
O_IPVER, /* arg1 = version */
O_UID, /* u32 = id */
O_GID, /* u32 = id */
O_ESTAB, /* none (tcp established) */
O_TCPFLAGS, /* arg1 = 2*u8 bitmap */
O_TCPWIN, /* arg1 = desired win */
O_TCPSEQ, /* u32 = desired seq. */
O_TCPACK, /* u32 = desired seq. */
O_ICMPTYPE, /* u32 = icmp bitmap */
O_TCPOPTS, /* arg1 = 2*u8 bitmap */
O_VERREVPATH, /* none */
O_VERSRCREACH, /* none */
O_PROBE_STATE, /* none */
O_KEEP_STATE, /* none */
O_LIMIT, /* ipfw_insn_limit */
O_LIMIT_PARENT, /* dyn_type, not an opcode. */
/*
* These are really 'actions'.
*/
O_LOG, /* ipfw_insn_log */
O_PROB, /* u32 = match probability */
O_CHECK_STATE, /* none */
O_ACCEPT, /* none */
O_DENY, /* none */
O_REJECT, /* arg1=icmp arg (same as deny) */
O_COUNT, /* none */
O_SKIPTO, /* arg1=next rule number */
O_PIPE, /* arg1=pipe number */
O_QUEUE, /* arg1=queue number */
O_DIVERT, /* arg1=port number */
O_TEE, /* arg1=port number */
O_FORWARD_IP, /* fwd sockaddr */
O_FORWARD_MAC, /* fwd mac */
O_NAT, /* nope */
O_REASS, /* none */
/*
* More opcodes.
*/
O_IPSEC, /* has ipsec history */
O_IP_SRC_LOOKUP, /* arg1=table number, u32=value */
O_IP_DST_LOOKUP, /* arg1=table number, u32=value */
O_ANTISPOOF, /* none */
O_JAIL, /* u32 = id */
O_ALTQ, /* u32 = altq classif. qid */
O_DIVERTED, /* arg1=bitmap (1:loop, 2:out) */
O_TCPDATALEN, /* arg1 = tcp data len */
O_IP6_SRC, /* address without mask */
O_IP6_SRC_ME, /* my addresses */
O_IP6_SRC_MASK, /* address with the mask */
O_IP6_DST,
O_IP6_DST_ME,
O_IP6_DST_MASK,
O_FLOW6ID, /* for flow id tag in the ipv6 pkt */
O_ICMP6TYPE, /* icmp6 packet type filtering */
O_EXT_HDR, /* filtering for ipv6 extension header */
O_IP6,
/*
* actions for ng_ipfw
*/
O_NETGRAPH, /* send to ng_ipfw */
O_NGTEE, /* copy to ng_ipfw */
O_IP4,
O_UNREACH6, /* arg1=icmpv6 code arg (deny) */
O_TAG, /* arg1=tag number */
O_TAGGED, /* arg1=tag number */
O_SETFIB, /* arg1=FIB number */
O_FIB, /* arg1=FIB desired fib number */
O_SOCKARG, /* socket argument */
O_CALLRETURN, /* arg1=called rule number */
O_FORWARD_IP6, /* fwd sockaddr_in6 */
O_DSCP, /* 2 u32 = DSCP mask */
O_SETDSCP, /* arg1=DSCP value */
O_IP_FLOW_LOOKUP, /* arg1=table number, u32=value */
O_EXTERNAL_ACTION, /* arg1=id of external action handler */
O_EXTERNAL_INSTANCE, /* arg1=id of eaction handler instance */
O_LAST_OPCODE /* not an opcode! */
};
/*
* The extension header are filtered only for presence using a bit
* vector with a flag for each header.
*/
#define EXT_FRAGMENT 0x1
#define EXT_HOPOPTS 0x2
#define EXT_ROUTING 0x4
#define EXT_AH 0x8
#define EXT_ESP 0x10
#define EXT_DSTOPTS 0x20
#define EXT_RTHDR0 0x40
#define EXT_RTHDR2 0x80
/*
* Template for instructions.
*
* ipfw_insn is used for all instructions which require no operands,
* a single 16-bit value (arg1), or a couple of 8-bit values.
*
* For other instructions which require different/larger arguments
* we have derived structures, ipfw_insn_*.
*
* The size of the instruction (in 32-bit words) is in the low
* 6 bits of "len". The 2 remaining bits are used to implement
* NOT and OR on individual instructions. Given a type, you can
* compute the length to be put in "len" using F_INSN_SIZE(t)
*
* F_NOT negates the match result of the instruction.
*
* F_OR is used to build or blocks. By default, instructions
* are evaluated as part of a logical AND. An "or" block
* { X or Y or Z } contains F_OR set in all but the last
* instruction of the block. A match will cause the code
* to skip past the last instruction of the block.
*
* NOTA BENE: in a couple of places we assume that
* sizeof(ipfw_insn) == sizeof(u_int32_t)
* this needs to be fixed.
*
*/
typedef struct _ipfw_insn { /* template for instructions */
u_int8_t opcode;
u_int8_t len; /* number of 32-bit words */
#define F_NOT 0x80
#define F_OR 0x40
#define F_LEN_MASK 0x3f
#define F_LEN(cmd) ((cmd)->len & F_LEN_MASK)
u_int16_t arg1;
} ipfw_insn;
/*
* The F_INSN_SIZE(type) computes the size, in 4-byte words, of
* a given type.
*/
#define F_INSN_SIZE(t) ((sizeof (t))/sizeof(u_int32_t))
/*
* This is used to store an array of 16-bit entries (ports etc.)
*/
typedef struct _ipfw_insn_u16 {
ipfw_insn o;
u_int16_t ports[2]; /* there may be more */
} ipfw_insn_u16;
/*
* This is used to store an array of 32-bit entries
* (uid, single IPv4 addresses etc.)
*/
typedef struct _ipfw_insn_u32 {
ipfw_insn o;
u_int32_t d[1]; /* one or more */
} ipfw_insn_u32;
/*
* This is used to store IP addr-mask pairs.
*/
typedef struct _ipfw_insn_ip {
ipfw_insn o;
struct in_addr addr;
struct in_addr mask;
} ipfw_insn_ip;
/*
* This is used to forward to a given address (ip).
*/
typedef struct _ipfw_insn_sa {
ipfw_insn o;
struct sockaddr_in sa;
} ipfw_insn_sa;
/*
* This is used to forward to a given address (ipv6).
*/
typedef struct _ipfw_insn_sa6 {
ipfw_insn o;
struct sockaddr_in6 sa;
} ipfw_insn_sa6;
/*
* This is used for MAC addr-mask pairs.
*/
typedef struct _ipfw_insn_mac {
ipfw_insn o;
u_char addr[12]; /* dst[6] + src[6] */
u_char mask[12]; /* dst[6] + src[6] */
} ipfw_insn_mac;
/*
* This is used for interface match rules (recv xx, xmit xx).
*/
typedef struct _ipfw_insn_if {
ipfw_insn o;
union {
struct in_addr ip;
int glob;
uint16_t kidx;
} p;
char name[IFNAMSIZ];
} ipfw_insn_if;
/*
* This is used for storing an altq queue id number.
*/
typedef struct _ipfw_insn_altq {
ipfw_insn o;
u_int32_t qid;
} ipfw_insn_altq;
/*
* This is used for limit rules.
*/
typedef struct _ipfw_insn_limit {
ipfw_insn o;
u_int8_t _pad;
u_int8_t limit_mask; /* combination of DYN_* below */
#define DYN_SRC_ADDR 0x1
#define DYN_SRC_PORT 0x2
#define DYN_DST_ADDR 0x4
#define DYN_DST_PORT 0x8
u_int16_t conn_limit;
} ipfw_insn_limit;
/*
* This is used for log instructions.
*/
typedef struct _ipfw_insn_log {
ipfw_insn o;
u_int32_t max_log; /* how many do we log -- 0 = all */
u_int32_t log_left; /* how many left to log */
} ipfw_insn_log;
/* Legacy NAT structures, compat only */
#ifndef _KERNEL
/*
* Data structures required by both ipfw(8) and ipfw(4) but not part of the
* management API are protected by IPFW_INTERNAL.
*/
#ifdef IPFW_INTERNAL
/* Server pool support (LSNAT). */
struct cfg_spool {
LIST_ENTRY(cfg_spool) _next; /* chain of spool instances */
struct in_addr addr;
u_short port;
};
#endif
/* Redirect modes id. */
#define REDIR_ADDR 0x01
#define REDIR_PORT 0x02
#define REDIR_PROTO 0x04
#ifdef IPFW_INTERNAL
/* Nat redirect configuration. */
struct cfg_redir {
LIST_ENTRY(cfg_redir) _next; /* chain of redir instances */
u_int16_t mode; /* type of redirect mode */
struct in_addr laddr; /* local ip address */
struct in_addr paddr; /* public ip address */
struct in_addr raddr; /* remote ip address */
u_short lport; /* local port */
u_short pport; /* public port */
u_short rport; /* remote port */
u_short pport_cnt; /* number of public ports */
u_short rport_cnt; /* number of remote ports */
int proto; /* protocol: tcp/udp */
struct alias_link **alink;
/* num of entry in spool chain */
u_int16_t spool_cnt;
/* chain of spool instances */
LIST_HEAD(spool_chain, cfg_spool) spool_chain;
};
#endif
#ifdef IPFW_INTERNAL
/* Nat configuration data struct. */
struct cfg_nat {
/* chain of nat instances */
LIST_ENTRY(cfg_nat) _next;
int id; /* nat id */
struct in_addr ip; /* nat ip address */
char if_name[IF_NAMESIZE]; /* interface name */
int mode; /* aliasing mode */
struct libalias *lib; /* libalias instance */
/* number of entry in spool chain */
int redir_cnt;
/* chain of redir instances */
LIST_HEAD(redir_chain, cfg_redir) redir_chain;
};
#endif
#define SOF_NAT sizeof(struct cfg_nat)
#define SOF_REDIR sizeof(struct cfg_redir)
#define SOF_SPOOL sizeof(struct cfg_spool)
#endif /* ifndef _KERNEL */
struct nat44_cfg_spool {
struct in_addr addr;
uint16_t port;
uint16_t spare;
};
#define NAT44_REDIR_ADDR 0x01
#define NAT44_REDIR_PORT 0x02
#define NAT44_REDIR_PROTO 0x04
/* Nat redirect configuration. */
struct nat44_cfg_redir {
struct in_addr laddr; /* local ip address */
struct in_addr paddr; /* public ip address */
struct in_addr raddr; /* remote ip address */
uint16_t lport; /* local port */
uint16_t pport; /* public port */
uint16_t rport; /* remote port */
uint16_t pport_cnt; /* number of public ports */
uint16_t rport_cnt; /* number of remote ports */
uint16_t mode; /* type of redirect mode */
uint16_t spool_cnt; /* num of entry in spool chain */
uint16_t spare;
uint32_t proto; /* protocol: tcp/udp */
};
/* Nat configuration data struct. */
struct nat44_cfg_nat {
char name[64]; /* nat name */
char if_name[64]; /* interface name */
uint32_t size; /* structure size incl. redirs */
struct in_addr ip; /* nat IPv4 address */
uint32_t mode; /* aliasing mode */
uint32_t redir_cnt; /* number of entry in spool chain */
};
/* Nat command. */
typedef struct _ipfw_insn_nat {
ipfw_insn o;
struct cfg_nat *nat;
} ipfw_insn_nat;
/* Apply ipv6 mask on ipv6 addr */
#define APPLY_MASK(addr,mask) \
(addr)->__u6_addr.__u6_addr32[0] &= (mask)->__u6_addr.__u6_addr32[0]; \
(addr)->__u6_addr.__u6_addr32[1] &= (mask)->__u6_addr.__u6_addr32[1]; \
(addr)->__u6_addr.__u6_addr32[2] &= (mask)->__u6_addr.__u6_addr32[2]; \
(addr)->__u6_addr.__u6_addr32[3] &= (mask)->__u6_addr.__u6_addr32[3];
/* Structure for ipv6 */
typedef struct _ipfw_insn_ip6 {
ipfw_insn o;
struct in6_addr addr6;
struct in6_addr mask6;
} ipfw_insn_ip6;
/* Used to support icmp6 types */
typedef struct _ipfw_insn_icmp6 {
ipfw_insn o;
uint32_t d[7]; /* XXX This number si related to the netinet/icmp6.h
* define ICMP6_MAXTYPE
* as follows: n = ICMP6_MAXTYPE/32 + 1
* Actually is 203
*/
} ipfw_insn_icmp6;
/*
* Here we have the structure representing an ipfw rule.
*
* Layout:
* struct ip_fw_rule
* [ counter block, size = rule->cntr_len ]
* [ one or more instructions, size = rule->cmd_len * 4 ]
*
* It starts with a general area (with link fields).
* Counter block may be next (if rule->cntr_len > 0),
* followed by an array of one or more instructions, which the code
* accesses as an array of 32-bit values. rule->cmd_len represents
* the total instructions legth in u32 worrd, while act_ofs represents
* rule action offset in u32 words.
*
* When assembling instruction, remember the following:
*
* + if a rule has a "keep-state" (or "limit") option, then the
* first instruction (at r->cmd) MUST BE an O_PROBE_STATE
* + if a rule has a "log" option, then the first action
* (at ACTION_PTR(r)) MUST be O_LOG
* + if a rule has an "altq" option, it comes after "log"
* + if a rule has an O_TAG option, it comes after "log" and "altq"
*
*
* All structures (excluding instructions) are u64-aligned.
* Please keep this.
*/
struct ip_fw_rule {
uint16_t act_ofs; /* offset of action in 32-bit units */
uint16_t cmd_len; /* # of 32-bit words in cmd */
uint16_t spare;
uint8_t set; /* rule set (0..31) */
uint8_t flags; /* rule flags */
uint32_t rulenum; /* rule number */
uint32_t id; /* rule id */
ipfw_insn cmd[1]; /* storage for commands */
};
#define IPFW_RULE_NOOPT 0x01 /* Has no options in body */
/* Unaligned version */
/* Base ipfw rule counter block. */
struct ip_fw_bcounter {
uint16_t size; /* Size of counter block, bytes */
uint8_t flags; /* flags for given block */
uint8_t spare;
uint32_t timestamp; /* tv_sec of last match */
uint64_t pcnt; /* Packet counter */
uint64_t bcnt; /* Byte counter */
};
#ifndef _KERNEL
/*
* Legacy rule format
*/
struct ip_fw {
struct ip_fw *x_next; /* linked list of rules */
struct ip_fw *next_rule; /* ptr to next [skipto] rule */
/* 'next_rule' is used to pass up 'set_disable' status */
uint16_t act_ofs; /* offset of action in 32-bit units */
uint16_t cmd_len; /* # of 32-bit words in cmd */
uint16_t rulenum; /* rule number */
uint8_t set; /* rule set (0..31) */
uint8_t _pad; /* padding */
uint32_t id; /* rule id */
/* These fields are present in all rules. */
uint64_t pcnt; /* Packet counter */
uint64_t bcnt; /* Byte counter */
uint32_t timestamp; /* tv_sec of last match */
ipfw_insn cmd[1]; /* storage for commands */
};
#endif
#define ACTION_PTR(rule) \
(ipfw_insn *)( (u_int32_t *)((rule)->cmd) + ((rule)->act_ofs) )
#define RULESIZE(rule) (sizeof(*(rule)) + (rule)->cmd_len * 4 - 4)
#if 1 // should be moved to in.h
/*
* This structure is used as a flow mask and a flow id for various
* parts of the code.
* addr_type is used in userland and kernel to mark the address type.
* fib is used in the kernel to record the fib in use.
* _flags is used in the kernel to store tcp flags for dynamic rules.
*/
struct ipfw_flow_id {
uint32_t dst_ip;
uint32_t src_ip;
uint16_t dst_port;
uint16_t src_port;
uint8_t fib;
uint8_t proto;
uint8_t _flags; /* protocol-specific flags */
uint8_t addr_type; /* 4=ip4, 6=ip6, 1=ether ? */
struct in6_addr dst_ip6;
struct in6_addr src_ip6;
uint32_t flow_id6;
uint32_t extra; /* queue/pipe or frag_id */
};
#endif
#define IS_IP6_FLOW_ID(id) ((id)->addr_type == 6)
/*
* Dynamic ipfw rule.
*/
typedef struct _ipfw_dyn_rule ipfw_dyn_rule;
struct _ipfw_dyn_rule {
ipfw_dyn_rule *next; /* linked list of rules. */
struct ip_fw *rule; /* pointer to rule */
/* 'rule' is used to pass up the rule number (from the parent) */
ipfw_dyn_rule *parent; /* pointer to parent rule */
u_int64_t pcnt; /* packet match counter */
u_int64_t bcnt; /* byte match counter */
struct ipfw_flow_id id; /* (masked) flow id */
u_int32_t expire; /* expire time */
u_int32_t bucket; /* which bucket in hash table */
u_int32_t state; /* state of this rule (typically a
* combination of TCP flags)
*/
u_int32_t ack_fwd; /* most recent ACKs in forward */
u_int32_t ack_rev; /* and reverse directions (used */
/* to generate keepalives) */
u_int16_t dyn_type; /* rule type */
u_int16_t count; /* refcount */
u_int16_t kidx; /* index of named object */
} __packed __aligned(8);
/*
* Definitions for IP option names.
*/
#define IP_FW_IPOPT_LSRR 0x01
#define IP_FW_IPOPT_SSRR 0x02
#define IP_FW_IPOPT_RR 0x04
#define IP_FW_IPOPT_TS 0x08
/*
* Definitions for TCP option names.
*/
#define IP_FW_TCPOPT_MSS 0x01
#define IP_FW_TCPOPT_WINDOW 0x02
#define IP_FW_TCPOPT_SACK 0x04
#define IP_FW_TCPOPT_TS 0x08
#define IP_FW_TCPOPT_CC 0x10
#define ICMP_REJECT_RST 0x100 /* fake ICMP code (send a TCP RST) */
#define ICMP6_UNREACH_RST 0x100 /* fake ICMPv6 code (send a TCP RST) */
/*
* These are used for lookup tables.
*/
#define IPFW_TABLE_ADDR 1 /* Table for holding IPv4/IPv6 prefixes */
#define IPFW_TABLE_INTERFACE 2 /* Table for holding interface names */
#define IPFW_TABLE_NUMBER 3 /* Table for holding ports/uid/gid/etc */
#define IPFW_TABLE_FLOW 4 /* Table for holding flow data */
#define IPFW_TABLE_MAXTYPE 4 /* Maximum valid number */
#define IPFW_TABLE_CIDR IPFW_TABLE_ADDR /* compat */
/* Value types */
#define IPFW_VTYPE_LEGACY 0xFFFFFFFF /* All data is filled in */
#define IPFW_VTYPE_SKIPTO 0x00000001 /* skipto/call/callreturn */
#define IPFW_VTYPE_PIPE 0x00000002 /* pipe/queue */
#define IPFW_VTYPE_FIB 0x00000004 /* setfib */
#define IPFW_VTYPE_NAT 0x00000008 /* nat */
#define IPFW_VTYPE_DSCP 0x00000010 /* dscp */
#define IPFW_VTYPE_TAG 0x00000020 /* tag/untag */
#define IPFW_VTYPE_DIVERT 0x00000040 /* divert/tee */
#define IPFW_VTYPE_NETGRAPH 0x00000080 /* netgraph/ngtee */
#define IPFW_VTYPE_LIMIT 0x00000100 /* limit */
#define IPFW_VTYPE_NH4 0x00000200 /* IPv4 nexthop */
#define IPFW_VTYPE_NH6 0x00000400 /* IPv6 nexthop */
typedef struct _ipfw_table_entry {
in_addr_t addr; /* network address */
u_int32_t value; /* value */
u_int16_t tbl; /* table number */
u_int8_t masklen; /* mask length */
} ipfw_table_entry;
typedef struct _ipfw_table_xentry {
uint16_t len; /* Total entry length */
uint8_t type; /* entry type */
uint8_t masklen; /* mask length */
uint16_t tbl; /* table number */
uint16_t flags; /* record flags */
uint32_t value; /* value */
union {
/* Longest field needs to be aligned by 4-byte boundary */
struct in6_addr addr6; /* IPv6 address */
char iface[IF_NAMESIZE]; /* interface name */
} k;
} ipfw_table_xentry;
#define IPFW_TCF_INET 0x01 /* CIDR flags: IPv4 record */
typedef struct _ipfw_table {
u_int32_t size; /* size of entries in bytes */
u_int32_t cnt; /* # of entries */
u_int16_t tbl; /* table number */
ipfw_table_entry ent[0]; /* entries */
} ipfw_table;
typedef struct _ipfw_xtable {
ip_fw3_opheader opheader; /* IP_FW3 opcode */
uint32_t size; /* size of entries in bytes */
uint32_t cnt; /* # of entries */
uint16_t tbl; /* table number */
uint8_t type; /* table type */
ipfw_table_xentry xent[0]; /* entries */
} ipfw_xtable;
typedef struct _ipfw_obj_tlv {
uint16_t type; /* TLV type */
uint16_t flags; /* TLV-specific flags */
uint32_t length; /* Total length, aligned to u64 */
} ipfw_obj_tlv;
#define IPFW_TLV_TBL_NAME 1
#define IPFW_TLV_TBLNAME_LIST 2
#define IPFW_TLV_RULE_LIST 3
#define IPFW_TLV_DYNSTATE_LIST 4
#define IPFW_TLV_TBL_ENT 5
#define IPFW_TLV_DYN_ENT 6
#define IPFW_TLV_RULE_ENT 7
#define IPFW_TLV_TBLENT_LIST 8
#define IPFW_TLV_RANGE 9
#define IPFW_TLV_EACTION 10
#define IPFW_TLV_COUNTERS 11
#define IPFW_TLV_STATE_NAME 14
#define IPFW_TLV_EACTION_BASE 1000
#define IPFW_TLV_EACTION_NAME(arg) (IPFW_TLV_EACTION_BASE + (arg))
/* Object name TLV */
typedef struct _ipfw_obj_ntlv {
ipfw_obj_tlv head; /* TLV header */
uint16_t idx; /* Name index */
uint8_t set; /* set, if applicable */
uint8_t type; /* object type, if applicable */
uint32_t spare; /* unused */
char name[64]; /* Null-terminated name */
} ipfw_obj_ntlv;
/* IPv4/IPv6 L4 flow description */
struct tflow_entry {
uint8_t af;
uint8_t proto;
uint16_t spare;
uint16_t sport;
uint16_t dport;
union {
struct {
struct in_addr sip;
struct in_addr dip;
} a4;
struct {
struct in6_addr sip6;
struct in6_addr dip6;
} a6;
} a;
};
typedef struct _ipfw_table_value {
uint32_t tag; /* O_TAG/O_TAGGED */
uint32_t pipe; /* O_PIPE/O_QUEUE */
uint16_t divert; /* O_DIVERT/O_TEE */
uint16_t skipto; /* skipto, CALLRET */
uint32_t netgraph; /* O_NETGRAPH/O_NGTEE */
uint32_t fib; /* O_SETFIB */
uint32_t nat; /* O_NAT */
uint32_t nh4;
uint8_t dscp;
uint8_t spare0;
uint16_t spare1;
struct in6_addr nh6;
uint32_t limit; /* O_LIMIT */
uint32_t zoneid; /* scope zone id for nh6 */
uint64_t reserved;
} ipfw_table_value;
/* Table entry TLV */
typedef struct _ipfw_obj_tentry {
ipfw_obj_tlv head; /* TLV header */
uint8_t subtype; /* subtype (IPv4,IPv6) */
uint8_t masklen; /* mask length */
uint8_t result; /* request result */
uint8_t spare0;
uint16_t idx; /* Table name index */
uint16_t spare1;
union {
/* Longest field needs to be aligned by 8-byte boundary */
struct in_addr addr; /* IPv4 address */
uint32_t key; /* uid/gid/port */
struct in6_addr addr6; /* IPv6 address */
char iface[IF_NAMESIZE]; /* interface name */
struct tflow_entry flow;
} k;
union {
ipfw_table_value value; /* value data */
uint32_t kidx; /* value kernel index */
} v;
} ipfw_obj_tentry;
#define IPFW_TF_UPDATE 0x01 /* Update record if exists */
/* Container TLV */
#define IPFW_CTF_ATOMIC 0x01 /* Perform atomic operation */
/* Operation results */
#define IPFW_TR_IGNORED 0 /* Entry was ignored (rollback) */
#define IPFW_TR_ADDED 1 /* Entry was successfully added */
#define IPFW_TR_UPDATED 2 /* Entry was successfully updated*/
#define IPFW_TR_DELETED 3 /* Entry was successfully deleted*/
#define IPFW_TR_LIMIT 4 /* Entry was ignored (limit) */
#define IPFW_TR_NOTFOUND 5 /* Entry was not found */
#define IPFW_TR_EXISTS 6 /* Entry already exists */
#define IPFW_TR_ERROR 7 /* Request has failed (unknown) */
typedef struct _ipfw_obj_dyntlv {
ipfw_obj_tlv head;
ipfw_dyn_rule state;
} ipfw_obj_dyntlv;
#define IPFW_DF_LAST 0x01 /* Last state in chain */
/* Containter TLVs */
typedef struct _ipfw_obj_ctlv {
ipfw_obj_tlv head; /* TLV header */
uint32_t count; /* Number of sub-TLVs */
uint16_t objsize; /* Single object size */
uint8_t version; /* TLV version */
uint8_t flags; /* TLV-specific flags */
} ipfw_obj_ctlv;
/* Range TLV */
typedef struct _ipfw_range_tlv {
ipfw_obj_tlv head; /* TLV header */
uint32_t flags; /* Range flags */
uint16_t start_rule; /* Range start */
uint16_t end_rule; /* Range end */
uint32_t set; /* Range set to match */
uint32_t new_set; /* New set to move/swap to */
} ipfw_range_tlv;
#define IPFW_RCFLAG_RANGE 0x01 /* rule range is set */
#define IPFW_RCFLAG_ALL 0x02 /* match ALL rules */
#define IPFW_RCFLAG_SET 0x04 /* match rules in given set */
/* User-settable flags */
#define IPFW_RCFLAG_USER (IPFW_RCFLAG_RANGE | IPFW_RCFLAG_ALL | \
IPFW_RCFLAG_SET)
/* Internally used flags */
#define IPFW_RCFLAG_DEFAULT 0x0100 /* Do not skip defaul rule */
typedef struct _ipfw_ta_tinfo {
uint32_t flags; /* Format flags */
uint32_t spare;
uint8_t taclass4; /* algorithm class */
uint8_t spare4;
uint16_t itemsize4; /* item size in runtime */
uint32_t size4; /* runtime structure size */
uint32_t count4; /* number of items in runtime */
uint8_t taclass6; /* algorithm class */
uint8_t spare6;
uint16_t itemsize6; /* item size in runtime */
uint32_t size6; /* runtime structure size */
uint32_t count6; /* number of items in runtime */
} ipfw_ta_tinfo;
#define IPFW_TACLASS_HASH 1 /* algo is based on hash */
#define IPFW_TACLASS_ARRAY 2 /* algo is based on array */
#define IPFW_TACLASS_RADIX 3 /* algo is based on radix tree */
#define IPFW_TATFLAGS_DATA 0x0001 /* Has data filled in */
#define IPFW_TATFLAGS_AFDATA 0x0002 /* Separate data per AF */
#define IPFW_TATFLAGS_AFITEM 0x0004 /* diff. items per AF */
typedef struct _ipfw_xtable_info {
uint8_t type; /* table type (addr,iface,..) */
uint8_t tflags; /* type flags */
uint16_t mflags; /* modification flags */
uint16_t flags; /* generic table flags */
uint16_t spare[3];
uint32_t vmask; /* bitmask with value types */
uint32_t set; /* set table is in */
uint32_t kidx; /* kernel index */
uint32_t refcnt; /* number of references */
uint32_t count; /* Number of records */
uint32_t size; /* Total size of records(export)*/
uint32_t limit; /* Max number of records */
char tablename[64]; /* table name */
char algoname[64]; /* algorithm name */
ipfw_ta_tinfo ta_info; /* additional algo stats */
} ipfw_xtable_info;
/* Generic table flags */
#define IPFW_TGFLAGS_LOCKED 0x01 /* Tables is locked from changes*/
/* Table type-specific flags */
#define IPFW_TFFLAG_SRCIP 0x01
#define IPFW_TFFLAG_DSTIP 0x02
#define IPFW_TFFLAG_SRCPORT 0x04
#define IPFW_TFFLAG_DSTPORT 0x08
#define IPFW_TFFLAG_PROTO 0x10
/* Table modification flags */
#define IPFW_TMFLAGS_LIMIT 0x0002 /* Change limit value */
#define IPFW_TMFLAGS_LOCK 0x0004 /* Change table lock state */
typedef struct _ipfw_iface_info {
char ifname[64]; /* interface name */
uint32_t ifindex; /* interface index */
uint32_t flags; /* flags */
uint32_t refcnt; /* number of references */
uint32_t gencnt; /* number of changes */
uint64_t spare;
} ipfw_iface_info;
#define IPFW_IFFLAG_RESOLVED 0x01 /* Interface exists */
typedef struct _ipfw_ta_info {
char algoname[64]; /* algorithm name */
uint32_t type; /* lookup type */
uint32_t flags;
uint32_t refcnt;
uint32_t spare0;
uint64_t spare1;
} ipfw_ta_info;
typedef struct _ipfw_obj_header {
ip_fw3_opheader opheader; /* IP_FW3 opcode */
uint32_t spare;
uint16_t idx; /* object name index */
uint8_t objtype; /* object type */
uint8_t objsubtype; /* object subtype */
ipfw_obj_ntlv ntlv; /* object name tlv */
} ipfw_obj_header;
typedef struct _ipfw_obj_lheader {
ip_fw3_opheader opheader; /* IP_FW3 opcode */
uint32_t set_mask; /* disabled set mask */
uint32_t count; /* Total objects count */
uint32_t size; /* Total size (incl. header) */
uint32_t objsize; /* Size of one object */
} ipfw_obj_lheader;
#define IPFW_CFG_GET_STATIC 0x01
#define IPFW_CFG_GET_STATES 0x02
#define IPFW_CFG_GET_COUNTERS 0x04
typedef struct _ipfw_cfg_lheader {
ip_fw3_opheader opheader; /* IP_FW3 opcode */
uint32_t set_mask; /* enabled set mask */
uint32_t spare;
uint32_t flags; /* Request flags */
uint32_t size; /* neded buffer size */
uint32_t start_rule;
uint32_t end_rule;
} ipfw_cfg_lheader;
typedef struct _ipfw_range_header {
ip_fw3_opheader opheader; /* IP_FW3 opcode */
ipfw_range_tlv range;
} ipfw_range_header;
typedef struct _ipfw_sopt_info {
uint16_t opcode;
uint8_t version;
uint8_t dir;
uint8_t spare;
uint64_t refcnt;
} ipfw_sopt_info;
#endif /* _IPFW2_H */
Reference in New Issue View Git Blame Copy Permalink