8ea3ce2aac
Proberly fail outstanding bio requests on devices that are detached. This makes it possible to change between disk/cdrom/dvd/whathaveyou in a notebook, just by suspending it, changing the device in the bay (or what you model calls it), unsuspend and the ATA driver will figure out what disappeared and properly fail those, and attach any new devices found.
407 lines
16 KiB
C
407 lines
16 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000,2001 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/* ATA register defines */
|
|
#define ATA_DATA 0x00 /* data register */
|
|
#define ATA_ERROR 0x01 /* (R) error register */
|
|
#define ATA_E_NM 0x02 /* no media */
|
|
#define ATA_E_ABORT 0x04 /* command aborted */
|
|
#define ATA_E_MCR 0x08 /* media change request */
|
|
#define ATA_E_IDNF 0x10 /* ID not found */
|
|
#define ATA_E_MC 0x20 /* media changed */
|
|
#define ATA_E_UNC 0x40 /* uncorrectable data */
|
|
#define ATA_E_ICRC 0x80 /* UDMA crc error */
|
|
|
|
#define ATA_FEATURE 0x01 /* (W) feature register */
|
|
#define ATA_F_DMA 0x01 /* enable DMA */
|
|
#define ATA_F_OVL 0x02 /* enable overlap */
|
|
|
|
#define ATA_COUNT 0x02 /* (W) sector count */
|
|
#define ATA_IREASON 0x02 /* (R) interrupt reason */
|
|
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
|
|
#define ATA_I_IN 0x02 /* read (1) | write (0) */
|
|
#define ATA_I_RELEASE 0x04 /* released bus (1) */
|
|
#define ATA_I_TAGMASK 0xf8 /* tag mask */
|
|
|
|
#define ATA_SECTOR 0x03 /* sector # */
|
|
#define ATA_CYL_LSB 0x04 /* cylinder# LSB */
|
|
#define ATA_CYL_MSB 0x05 /* cylinder# MSB */
|
|
#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */
|
|
#define ATA_D_LBA 0x40 /* use LBA adressing */
|
|
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
|
|
|
|
#define ATA_CMD 0x07 /* command register */
|
|
#define ATA_C_NOP 0x00 /* NOP command */
|
|
#define ATA_C_F_FLUSHQUEUE 0x00 /* flush queued cmd's */
|
|
#define ATA_C_F_AUTOPOLL 0x01 /* start autopoll function */
|
|
#define ATA_C_ATAPI_RESET 0x08 /* reset ATAPI device */
|
|
#define ATA_C_READ 0x20 /* read command */
|
|
#define ATA_C_WRITE 0x30 /* write command */
|
|
#define ATA_C_PACKET_CMD 0xa0 /* packet command */
|
|
#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/
|
|
#define ATA_C_SERVICE 0xa2 /* service command */
|
|
#define ATA_C_READ_MUL 0xc4 /* read multi command */
|
|
#define ATA_C_WRITE_MUL 0xc5 /* write multi command */
|
|
#define ATA_C_SET_MULTI 0xc6 /* set multi size command */
|
|
#define ATA_C_READ_DMA_QUEUED 0xc7 /* read w/DMA QUEUED command */
|
|
#define ATA_C_READ_DMA 0xc8 /* read w/DMA command */
|
|
#define ATA_C_WRITE_DMA 0xca /* write w/DMA command */
|
|
#define ATA_C_WRITE_DMA_QUEUED 0xcc /* write w/DMA QUEUED command */
|
|
#define ATA_C_FLUSHCACHE 0xe7 /* flush cache to disk */
|
|
#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */
|
|
#define ATA_C_SETFEATURES 0xef /* features command */
|
|
#define ATA_C_F_SETXFER 0x03 /* set transfer mode */
|
|
#define ATA_C_F_ENAB_WCACHE 0x02 /* enable write cache */
|
|
#define ATA_C_F_DIS_WCACHE 0x82 /* disable write cache */
|
|
#define ATA_C_F_ENAB_RCACHE 0xaa /* enable readahead cache */
|
|
#define ATA_C_F_DIS_RCACHE 0x55 /* disable readahead cache */
|
|
#define ATA_C_F_ENAB_RELIRQ 0x5d /* enable release interrupt */
|
|
#define ATA_C_F_DIS_RELIRQ 0xdd /* disable release interrupt */
|
|
#define ATA_C_F_ENAB_SRVIRQ 0x5e /* enable service interrupt */
|
|
#define ATA_C_F_DIS_SRVIRQ 0xde /* disable service interrupt */
|
|
|
|
#define ATA_STATUS 0x07 /* status register */
|
|
#define ATA_S_ERROR 0x01 /* error */
|
|
#define ATA_S_INDEX 0x02 /* index */
|
|
#define ATA_S_CORR 0x04 /* data corrected */
|
|
#define ATA_S_DRQ 0x08 /* data request */
|
|
#define ATA_S_DSC 0x10 /* drive seek completed */
|
|
#define ATA_S_SERVICE 0x10 /* drive needs service */
|
|
#define ATA_S_DWF 0x20 /* drive write fault */
|
|
#define ATA_S_DMA 0x20 /* DMA ready */
|
|
#define ATA_S_READY 0x40 /* drive ready */
|
|
#define ATA_S_BUSY 0x80 /* busy */
|
|
|
|
#define ATA_ALTSTAT 0x00 /* alternate status register */
|
|
#define ATA_ALTOFFSET 0x206 /* alternate registers offset */
|
|
#define ATA_PCCARD_ALTOFFSET 0x0e /* do for PCCARD devices */
|
|
#define ATA_A_IDS 0x02 /* disable interrupts */
|
|
#define ATA_A_RESET 0x04 /* RESET controller */
|
|
#define ATA_A_4BIT 0x08 /* 4 head bits */
|
|
|
|
/* misc defines */
|
|
#define ATA_PRIMARY 0x1f0
|
|
#define ATA_SECONDARY 0x170
|
|
#define ATA_MASTER 0x00
|
|
#define ATA_SLAVE 0x10
|
|
#define ATA_IOSIZE 0x08
|
|
#define ATA_ALTIOSIZE 0x01
|
|
#define ATA_BMIOSIZE 0x08
|
|
#define ATA_OP_FINISHED 0x00
|
|
#define ATA_OP_CONTINUES 0x01
|
|
#define ATA_DEV(device) ((device == ATA_MASTER) ? 0 : 1)
|
|
#define ATA_PARAM(scp, device) (scp->dev_param[ATA_DEV(device)])
|
|
|
|
#define ATA_IOADDR_RID 0
|
|
#define ATA_ALTADDR_RID 1
|
|
#define ATA_BMADDR_RID 2
|
|
#define ATA_IRQ_RID 0
|
|
|
|
/* busmaster DMA related defines */
|
|
#define ATA_DMA_ENTRIES 256
|
|
#define ATA_DMA_EOT 0x80000000
|
|
|
|
#define ATA_BMCMD_PORT 0x00
|
|
#define ATA_BMCMD_START_STOP 0x01
|
|
#define ATA_BMCMD_WRITE_READ 0x08
|
|
|
|
#define ATA_BMSTAT_PORT 0x02
|
|
#define ATA_BMSTAT_ACTIVE 0x01
|
|
#define ATA_BMSTAT_ERROR 0x02
|
|
#define ATA_BMSTAT_INTERRUPT 0x04
|
|
#define ATA_BMSTAT_MASK 0x07
|
|
#define ATA_BMSTAT_DMA_MASTER 0x20
|
|
#define ATA_BMSTAT_DMA_SLAVE 0x40
|
|
#define ATA_BMSTAT_DMA_SIMPLEX 0x80
|
|
|
|
#define ATA_BMDTP_PORT 0x04
|
|
|
|
/* structure for holding DMA address data */
|
|
struct ata_dmaentry {
|
|
u_int32_t base;
|
|
u_int32_t count;
|
|
};
|
|
|
|
/* ATA/ATAPI device parameter information */
|
|
struct ata_params {
|
|
u_int8_t cmdsize :2; /* packet command size */
|
|
#define ATAPI_PSIZE_12 0 /* 12 bytes */
|
|
#define ATAPI_PSIZE_16 1 /* 16 bytes */
|
|
|
|
u_int8_t :3;
|
|
u_int8_t drqtype :2; /* DRQ type */
|
|
#define ATAPI_DRQT_MPROC 0 /* cpu 3 ms delay */
|
|
#define ATAPI_DRQT_INTR 1 /* intr 10 ms delay */
|
|
#define ATAPI_DRQT_ACCEL 2 /* accel 50 us delay */
|
|
|
|
u_int8_t removable :1; /* device is removable */
|
|
u_int8_t device_type :5; /* device type */
|
|
#define ATAPI_TYPE_DIRECT 0 /* disk/floppy */
|
|
#define ATAPI_TYPE_TAPE 1 /* streaming tape */
|
|
#define ATAPI_TYPE_CDROM 5 /* CD-ROM device */
|
|
#define ATAPI_TYPE_OPTICAL 7 /* optical disk */
|
|
|
|
u_int8_t :1;
|
|
u_int8_t proto :2; /* command protocol */
|
|
#define ATAPI_PROTO_ATAPI 2
|
|
|
|
u_int16_t cylinders; /* number of cylinders */
|
|
u_int16_t reserved2;
|
|
u_int16_t heads; /* # heads */
|
|
u_int16_t unfbytespertrk; /* # unformatted bytes/track */
|
|
u_int16_t unfbytes; /* # unformatted bytes/sector */
|
|
u_int16_t sectors; /* # sectors/track */
|
|
u_int16_t vendorunique0[3];
|
|
u_int8_t serial[20]; /* serial number */
|
|
u_int16_t buffertype; /* buffer type */
|
|
#define ATA_BT_SINGLEPORTSECTOR 1 /* 1 port, 1 sector buffer */
|
|
#define ATA_BT_DUALPORTMULTI 2 /* 2 port, mult sector buffer */
|
|
#define ATA_BT_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
|
|
u_int16_t buffersize; /* buf size, 512-byte units */
|
|
u_int16_t necc; /* ecc bytes appended */
|
|
u_int8_t revision[8]; /* firmware revision */
|
|
u_int8_t model[40]; /* model name */
|
|
u_int8_t nsecperint; /* sectors per interrupt */
|
|
u_int8_t vendorunique1;
|
|
u_int16_t usedmovsd; /* double word read/write? */
|
|
|
|
u_int8_t vendorcap; /* vendor capabilities */
|
|
u_int8_t dmaflag :1; /* DMA supported - always 1 */
|
|
u_int8_t lbaflag :1; /* LBA supported - always 1 */
|
|
u_int8_t iordydis :1; /* IORDY may be disabled */
|
|
u_int8_t iordyflag :1; /* IORDY supported */
|
|
u_int8_t softreset :1; /* needs softreset when busy */
|
|
u_int8_t stdby_ovlap :1; /* standby/overlap supported */
|
|
u_int8_t queueing :1; /* supports queuing overlap */
|
|
u_int8_t idmaflag :1; /* interleaved DMA supported */
|
|
u_int16_t capvalidate; /* validation for above */
|
|
|
|
u_int8_t vendorunique3;
|
|
u_int8_t opiomode; /* PIO modes 0-2 */
|
|
u_int8_t vendorunique4;
|
|
u_int8_t odmamode; /* old DMA modes, not ATA-3 */
|
|
|
|
u_int16_t atavalid; /* fields valid */
|
|
#define ATA_FLAG_54_58 1 /* words 54-58 valid */
|
|
#define ATA_FLAG_64_70 2 /* words 64-70 valid */
|
|
#define ATA_FLAG_88 4 /* word 88 valid */
|
|
|
|
u_int16_t currcyls;
|
|
u_int16_t currheads;
|
|
u_int16_t currsectors;
|
|
u_int16_t currsize0;
|
|
u_int16_t currsize1;
|
|
u_int8_t currmultsect;
|
|
u_int8_t multsectvalid;
|
|
u_int32_t lbasize;
|
|
|
|
u_int16_t sdmamodes; /* singleword DMA modes */
|
|
u_int16_t wdmamodes; /* multiword DMA modes */
|
|
u_int16_t apiomodes; /* advanced PIO modes */
|
|
|
|
u_int16_t mwdmamin; /* min. M/W DMA time/word ns */
|
|
u_int16_t mwdmarec; /* rec. M/W DMA time ns */
|
|
u_int16_t pioblind; /* min. PIO cycle w/o flow */
|
|
u_int16_t pioiordy; /* min. PIO cycle IORDY flow */
|
|
|
|
u_int16_t reserved69;
|
|
u_int16_t reserved70;
|
|
u_int16_t rlsovlap; /* rel time (us) for overlap */
|
|
u_int16_t rlsservice; /* rel time (us) for service */
|
|
u_int16_t reserved73;
|
|
u_int16_t reserved74;
|
|
u_int16_t queuelen:5;
|
|
u_int16_t :11;
|
|
u_int16_t reserved76;
|
|
u_int16_t reserved77;
|
|
u_int16_t reserved78;
|
|
u_int16_t reserved79;
|
|
u_int16_t versmajor;
|
|
u_int16_t versminor;
|
|
u_int16_t featsupp1; /* 82 */
|
|
u_int16_t supmicrocode:1;
|
|
u_int16_t supqueued:1;
|
|
u_int16_t supcfa:1;
|
|
u_int16_t supapm:1;
|
|
u_int16_t suprmsn:1;
|
|
u_int16_t :11;
|
|
u_int16_t featsupp3; /* 84 */
|
|
u_int16_t featenab1; /* 85 */
|
|
u_int16_t enabmicrocode:1;
|
|
u_int16_t enabqueued:1;
|
|
u_int16_t enabcfa:1;
|
|
u_int16_t enabapm:1;
|
|
u_int16_t enabrmsn:1;
|
|
u_int16_t :11;
|
|
u_int16_t featenab3; /* 87 */
|
|
u_int16_t udmamodes; /* UltraDMA modes */
|
|
u_int16_t erasetime;
|
|
u_int16_t enherasetime;
|
|
u_int16_t apmlevel;
|
|
u_int16_t masterpasswdrev;
|
|
u_int16_t masterhwres :8;
|
|
u_int16_t slavehwres :5;
|
|
u_int16_t cblid :1;
|
|
u_int16_t reserved93_1415 :2;
|
|
u_int16_t reserved94[32];
|
|
u_int16_t rmvstat;
|
|
u_int16_t securstat;
|
|
u_int16_t reserved129[30];
|
|
u_int16_t cfapwrmode;
|
|
u_int16_t reserved161[84];
|
|
u_int16_t integrity;
|
|
};
|
|
|
|
/* structure describing an ATA device */
|
|
struct ata_softc {
|
|
struct device *dev; /* device handle */
|
|
int channel; /* channel on this controller */
|
|
struct resource *r_io; /* io addr resource handle */
|
|
struct resource *r_altio; /* altio addr resource handle */
|
|
struct resource *r_bmio; /* bmio addr resource handle */
|
|
struct resource *r_irq; /* interrupt of this channel */
|
|
void *ih; /* interrupt handle */
|
|
int (*intr_func)(struct ata_softc *); /* interrupt function */
|
|
u_int32_t chiptype; /* pciid of controller chip */
|
|
u_int32_t alignment; /* dma engine min alignment */
|
|
struct ata_params *dev_param[2]; /* ptr to devices params */
|
|
void *dev_softc[2]; /* ptr to devices softc's */
|
|
int mode[2]; /* transfer mode for devices */
|
|
#define ATA_PIO 0x00
|
|
#define ATA_PIO0 0x08
|
|
#define ATA_PIO1 0x09
|
|
#define ATA_PIO2 0x0a
|
|
#define ATA_PIO3 0x0b
|
|
#define ATA_PIO4 0x0c
|
|
#define ATA_DMA 0x10
|
|
#define ATA_WDMA2 0x22
|
|
#define ATA_UDMA2 0x42
|
|
#define ATA_UDMA4 0x44
|
|
#define ATA_UDMA5 0x45
|
|
|
|
int flags; /* controller flags */
|
|
#define ATA_DMA_ACTIVE 0x01
|
|
#define ATA_ATAPI_DMA_RO 0x02
|
|
#define ATA_USE_16BIT 0x04
|
|
#define ATA_NO_SLAVE 0x08
|
|
#define ATA_QUEUED 0x10
|
|
|
|
int devices; /* what is present */
|
|
#define ATA_ATA_MASTER 0x01
|
|
#define ATA_ATA_SLAVE 0x02
|
|
#define ATA_ATAPI_MASTER 0x04
|
|
#define ATA_ATAPI_SLAVE 0x08
|
|
|
|
u_int8_t status; /* last controller status */
|
|
u_int8_t error; /* last controller error */
|
|
int active; /* active processing request */
|
|
#define ATA_IDLE 0x0000
|
|
#define ATA_IMMEDIATE 0x0001
|
|
#define ATA_WAIT_INTR 0x0002
|
|
#define ATA_WAIT_READY 0x0004
|
|
#define ATA_ACTIVE 0x0008
|
|
#define ATA_ACTIVE_ATA 0x0010
|
|
#define ATA_ACTIVE_ATAPI 0x0020
|
|
#define ATA_REINITING 0x0040
|
|
|
|
TAILQ_HEAD(, ad_request) ata_queue; /* head of ATA queue */
|
|
TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */
|
|
void *running; /* currently running request */
|
|
};
|
|
|
|
/* externs */
|
|
extern devclass_t ata_devclass;
|
|
|
|
/* public prototypes */
|
|
int ata_probe(device_t);
|
|
int ata_attach(device_t);
|
|
int ata_detach(device_t);
|
|
int ata_resume(device_t);
|
|
|
|
void ata_start(struct ata_softc *);
|
|
void ata_reset(struct ata_softc *);
|
|
int ata_reinit(struct ata_softc *);
|
|
int ata_wait(struct ata_softc *, int, u_int8_t);
|
|
int ata_command(struct ata_softc *, int, u_int8_t, u_int16_t, u_int8_t, u_int8_t, u_int8_t, u_int8_t, int);
|
|
int ata_printf(struct ata_softc *, int, const char *, ...) __printflike(3, 4);
|
|
int ata_get_lun(u_int32_t *);
|
|
int ata_test_lun(u_int32_t *, int);
|
|
void ata_free_lun(u_int32_t *, int);
|
|
char *ata_mode2str(int);
|
|
int ata_pio2mode(int);
|
|
int ata_pmode(struct ata_params *);
|
|
int ata_wmode(struct ata_params *);
|
|
int ata_umode(struct ata_params *);
|
|
int ata_find_dev(device_t, u_int32_t, u_int32_t);
|
|
|
|
void *ata_dmaalloc(struct ata_softc *, int);
|
|
void ata_dmainit(struct ata_softc *, int, int, int, int);
|
|
int ata_dmasetup(struct ata_softc *, int, struct ata_dmaentry *, caddr_t, int);
|
|
void ata_dmastart(struct ata_softc *, int, struct ata_dmaentry *, int);
|
|
int ata_dmastatus(struct ata_softc *);
|
|
int ata_dmadone(struct ata_softc *);
|
|
|
|
/* macros to hide busspace uglyness */
|
|
#define ATA_INB(res, offset) \
|
|
bus_space_read_1(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), (offset))
|
|
#define ATA_INW(res, offset) \
|
|
bus_space_read_2(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), (offset))
|
|
#define ATA_INL(res, offset) \
|
|
bus_space_read_4(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), (offset))
|
|
#define ATA_INSW(res, offset, addr, count) \
|
|
bus_space_read_multi_2(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), \
|
|
(offset), (addr), (count))
|
|
#define ATA_INSL(res, offset, addr, count) \
|
|
bus_space_read_multi_4(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), \
|
|
(offset), (addr), (count))
|
|
#define ATA_OUTB(res, offset, value) \
|
|
bus_space_write_1(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), (offset), (value))
|
|
#define ATA_OUTW(res, offset, value) \
|
|
bus_space_write_2(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), (offset), (value))
|
|
#define ATA_OUTL(res, offset, value) \
|
|
bus_space_write_4(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), (offset), (value))
|
|
#define ATA_OUTSW(res, offset, addr, count) \
|
|
bus_space_write_multi_2(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), \
|
|
(offset), (addr), (count))
|
|
#define ATA_OUTSL(res, offset, addr, count) \
|
|
bus_space_write_multi_4(rman_get_bustag((res)), \
|
|
rman_get_bushandle((res)), \
|
|
(offset), (addr), (count))
|