9062e0e85d
Well, better late than newer, but things has been hectic
around here, sorry for the long delay.
DMA support has been added to the ATA disk driver.
This only works on Intel PIIX3/4, Acer Aladdin and Promise controllers.
The promise support works without the BIOS on the board,
and timing modes are set to support up to UDMA speed. This
solves the problems with having more than one promise controller
in the same system.
There is support for "generic" DMA, that might work on other
controllers, but now you have been warned :)
More chipset specific code will come soon, I have to find testers
with the approbiate HW, more on that when I have it ready.
The system now uses its own major numbers, please run MAKEDEV
with the devices you need (ad?, acd?, afd?, ast?).
For now the disk driver will also attach to the old wd major
so one can at least boot without this step, but be warned, this
will eventually go away. The bootblocks will have to be changed
before one can boot directly from an "ad" device though.
Fixed problems:
All known hang problems should be solved
The probe code has been sligthly changed, this should solve
the reports I have lying around (I hope).
Hangs when accessing ata & atapi device on the same channel simultaniously.
A real braino in ata_start caused this, fixed.
As usual USE AT YOUR OWN RISK!!, this is still pre alpha level code.
Especially the DMA support can hose your disk real bad if anything
goes wrong, agaiin you have been warned :)
But please tell me how it works for you!
Enjoy!
-Søren
693 lines
20 KiB
C
693 lines
20 KiB
C
/*-
|
|
* Copyright (c) 1998,1999 Søren Schmidt
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id: ata-disk.c,v 1.4 1999/03/07 21:49:14 sos Exp $
|
|
*/
|
|
|
|
#include "ata.h"
|
|
#include "atadisk.h"
|
|
#include "opt_devfs.h"
|
|
|
|
#if NATA > 0 && NATADISK > 0
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/device.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/buf.h>
|
|
#include <sys/disklabel.h>
|
|
#include <sys/diskslice.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/fcntl.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/stat.h>
|
|
#ifdef DEVFS
|
|
#include <sys/devfsext.h>
|
|
#endif
|
|
#include <machine/clock.h>
|
|
#include <pci/pcivar.h>
|
|
#include <i386/isa/isa.h>
|
|
#include <i386/isa/isa_device.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
|
|
static d_open_t adopen;
|
|
static d_close_t adclose;
|
|
static d_read_t adread;
|
|
static d_write_t adwrite;
|
|
static d_ioctl_t adioctl;
|
|
static d_strategy_t adstrategy;
|
|
static d_psize_t adpsize;
|
|
|
|
#define BDEV_MAJOR 30
|
|
#define CDEV_MAJOR 116
|
|
static struct cdevsw ad_cdevsw = {
|
|
adopen, adclose, adread, adwrite,
|
|
adioctl, nostop, nullreset, nodevtotty,
|
|
#ifdef NOTYET /* the boot code needs to be fixed to boot arbitrary devices */
|
|
seltrue, nommap, adstrategy, "ad",
|
|
#else
|
|
seltrue, nommap, adstrategy, "wd",
|
|
#endif
|
|
NULL, -1, nodump, adpsize,
|
|
D_DISK, 0, -1
|
|
};
|
|
|
|
/* misc defines */
|
|
#define UNIT(dev) (dev>>3 & 0x1f) /* assume 8 minor # per unit */
|
|
#define NUNIT 16 /* max # of devices */
|
|
|
|
/* prototypes */
|
|
static void ad_attach(void *);
|
|
static int32_t ad_getparam(struct ad_softc *);
|
|
static void ad_strategy(struct buf *);
|
|
static void ad_start(struct ad_softc *);
|
|
static void ad_sleep(struct ad_softc *, int8_t *);
|
|
static int8_t ad_version(u_int16_t);
|
|
int32_t ad_timeout(char *data);
|
|
static void ad_drvinit(void);
|
|
|
|
static struct ad_softc *adtab[NUNIT];
|
|
static int32_t adnlun = 0; /* number of config'd drives */
|
|
static struct intr_config_hook *ad_attach_hook;
|
|
|
|
static __inline int
|
|
apiomode(struct ata_params *ap)
|
|
{
|
|
if ((ap->atavalid & 2) == 2) {
|
|
if ((ap->apiomodes & 2) == 2) return 4;
|
|
if ((ap->apiomodes & 1) == 1) return 3;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static __inline int
|
|
wdmamode(struct ata_params *ap)
|
|
{
|
|
if ((ap->atavalid & 2) == 2) {
|
|
if ((ap->wdmamodes & 4) == 4) return 2;
|
|
if ((ap->wdmamodes & 2) == 2) return 1;
|
|
if ((ap->wdmamodes & 1) == 1) return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static __inline int
|
|
udmamode(struct ata_params *ap)
|
|
{
|
|
if ((ap->atavalid & 4) == 4) {
|
|
if ((ap->udmamodes & 4) == 4) return 2;
|
|
if ((ap->udmamodes & 2) == 2) return 1;
|
|
if ((ap->udmamodes & 1) == 1) return 0;
|
|
}
|
|
return -1;
|
|
}
|
|
|
|
static void
|
|
ad_attach(void *notused)
|
|
{
|
|
struct ad_softc *adp;
|
|
int32_t ctlr, dev, secsperint;
|
|
int8_t model_buf[40+1];
|
|
int8_t revision_buf[8+1];
|
|
|
|
/* now, run through atadevices and look for ATA disks */
|
|
for (ctlr=0; ctlr<MAXATA; ctlr++) {
|
|
if (!atadevices[ctlr]) continue;
|
|
for (dev=0; dev<2; dev++) {
|
|
if (atadevices[ctlr]->devices &
|
|
(dev ? ATA_ATA_SLAVE : ATA_ATA_MASTER)) {
|
|
#ifdef ATA_STATIC_ID
|
|
adnlun = dev + ctlr * 2;
|
|
#endif
|
|
adp = adtab[adnlun];
|
|
if (adp)
|
|
printf("ad%d: unit already attached\n", adnlun);
|
|
if (!(adp = malloc(sizeof(struct ad_softc),
|
|
M_DEVBUF, M_NOWAIT))) {
|
|
printf("ad%d: failed to allocate driver storage\n", adnlun);
|
|
continue;
|
|
}
|
|
bzero(adp, sizeof(struct ad_softc));
|
|
adp->controller = atadevices[ctlr];
|
|
adp->unit = (dev == 0) ? ATA_MASTER : ATA_SLAVE;
|
|
adp->lun = adnlun;
|
|
if (ad_getparam(adp)) {
|
|
free(adp, M_DEVBUF);
|
|
continue;
|
|
}
|
|
adp->cylinders = adp->ata_parm->cylinders;
|
|
adp->heads = adp->ata_parm->heads;
|
|
adp->sectors = adp->ata_parm->sectors;
|
|
adp->total_secs = adp->cylinders * adp->heads * adp->sectors;
|
|
if (adp->cylinders == 16383 &&
|
|
adp->total_secs < adp->ata_parm->lbasize) {
|
|
adp->total_secs = adp->ata_parm->lbasize;
|
|
adp->cylinders = adp->total_secs/(adp->heads*adp->sectors);
|
|
}
|
|
if (adp->ata_parm->atavalid & ATA_FLAG_54_58 &&
|
|
adp->ata_parm->lbasize)
|
|
adp->flags |= AD_F_USE_LBA;
|
|
|
|
/* use multiple sectors/interrupt if device supports it */
|
|
adp->transfersize = DEV_BSIZE;
|
|
secsperint = min(adp->ata_parm->nsecperint, 16);
|
|
|
|
if (!ata_command(adp->controller, adp->unit, ATA_C_SET_MULTI,
|
|
0, 0, 0, secsperint, 0, ATA_WAIT_INTR) &&
|
|
ata_wait(adp->controller, adp->unit, ATA_S_DRDY) >= 0)
|
|
adp->transfersize *= secsperint;
|
|
|
|
/* use DMA if drive & controller supports it */
|
|
if (!ata_dmainit(adp->controller, adp->unit,
|
|
apiomode(adp->ata_parm),
|
|
wdmamode(adp->ata_parm),
|
|
udmamode(adp->ata_parm)))
|
|
adp->flags |= AD_F_DMA_ENABLED;
|
|
|
|
bpack(adp->ata_parm->model, model_buf, sizeof(model_buf));
|
|
bpack(adp->ata_parm->revision, revision_buf,
|
|
sizeof(revision_buf));
|
|
printf("ad%d: <%s/%s> ATA-%c disk at ata%d as %s\n",
|
|
adnlun,
|
|
model_buf, revision_buf,
|
|
ad_version(adp->ata_parm->versmajor),
|
|
ctlr,
|
|
(adp->unit == ATA_MASTER) ? "master" : "slave ");
|
|
printf("ad%d: %luMB (%u sectors), "
|
|
"%u cyls, %u heads, %u S/T, %u B/S\n",
|
|
adnlun,
|
|
adp->total_secs / ((1024L * 1024L) / DEV_BSIZE),
|
|
adp->total_secs,
|
|
adp->cylinders,
|
|
adp->heads,
|
|
adp->sectors,
|
|
DEV_BSIZE);
|
|
printf("ad%d: piomode=%d, dmamode=%d, udmamode=%d\n",
|
|
adnlun,
|
|
apiomode(adp->ata_parm),
|
|
wdmamode(adp->ata_parm),
|
|
udmamode(adp->ata_parm));
|
|
printf("ad%d: %d secs/int, %d depth queue, %s mode\n",
|
|
adnlun, adp->transfersize / DEV_BSIZE,
|
|
adp->ata_parm->queuelen & 0x1f,
|
|
(adp->flags & AD_F_DMA_ENABLED) ? "DMA" :"PIO");
|
|
devstat_add_entry(&adp->stats, "ad", adnlun, DEV_BSIZE,
|
|
DEVSTAT_NO_ORDERED_TAGS,
|
|
DEVSTAT_TYPE_DIRECT | DEVSTAT_TYPE_IF_IDE,
|
|
0x180);
|
|
#ifdef DEVFS
|
|
adp->cdevs_token = devfs_add_devswf(&ad_cdevsw,
|
|
dkmakeminor(adp->lun, 0, 0),
|
|
DV_CHR,
|
|
UID_ROOT, GID_OPERATOR,
|
|
0640, "rad%d", adp->lun);
|
|
adp->bdevs_token = devfs_add_devswf(&ad_cdevsw,
|
|
dkmakeminor(adp->lun, 0, 0),
|
|
DV_BLK,
|
|
UID_ROOT, GID_OPERATOR,
|
|
0640, "ad%d", adp->lun);
|
|
#endif
|
|
bufq_init(&adp->queue);
|
|
adtab[adnlun++] = adp;
|
|
}
|
|
}
|
|
}
|
|
config_intrhook_disestablish(ad_attach_hook);
|
|
}
|
|
|
|
static int32_t
|
|
ad_getparam(struct ad_softc *adp)
|
|
{
|
|
struct ata_params *ata_parm;
|
|
int8_t buffer[DEV_BSIZE];
|
|
|
|
/* select drive */
|
|
outb(adp->controller->ioaddr + ATA_DRIVE, ATA_D_IBM | adp->unit);
|
|
DELAY(1);
|
|
ata_command(adp->controller, adp->unit, ATA_C_ATA_IDENTIFY,
|
|
0, 0, 0, 0, 0, ATA_WAIT_INTR);
|
|
if (ata_wait(adp->controller, adp->unit,
|
|
ATA_S_DRDY | ATA_S_DSC | ATA_S_DRQ))
|
|
return -1;
|
|
insw(adp->controller->ioaddr + ATA_DATA, buffer,
|
|
sizeof(buffer)/sizeof(int16_t));
|
|
ata_parm = malloc(sizeof(struct ata_params), M_DEVBUF, M_NOWAIT);
|
|
if (!ata_parm)
|
|
return -1;
|
|
bcopy(buffer, ata_parm, sizeof(struct ata_params));
|
|
bswap(ata_parm->model, sizeof(ata_parm->model));
|
|
btrim(ata_parm->model, sizeof(ata_parm->model));
|
|
bswap(ata_parm->revision, sizeof(ata_parm->revision));
|
|
btrim(ata_parm->revision, sizeof(ata_parm->revision));
|
|
adp->ata_parm = ata_parm;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adopen(dev_t dev, int32_t flags, int32_t fmt, struct proc *p)
|
|
{
|
|
int32_t lun = UNIT(dev);
|
|
struct ad_softc *adp;
|
|
struct disklabel label;
|
|
int32_t error;
|
|
|
|
#ifdef AD_DEBUG
|
|
printf("adopen: lun=%d adnlun=%d\n", lun, adnlun);
|
|
#endif
|
|
if (lun >= adnlun || !(adp = adtab[lun]))
|
|
return ENXIO;
|
|
|
|
/* spinwait if anybody else is reading the disk label */
|
|
/* is this needed anymore ?? SOS XXX */
|
|
while (adp->flags & AD_F_LABELLING)
|
|
tsleep((caddr_t)&adp->flags, PZERO - 1, "adop1", 1);
|
|
|
|
/* protect agains label race */
|
|
adp->flags |= AD_F_LABELLING;
|
|
|
|
/* build disklabel and initilize slice tables */
|
|
bzero(&label, sizeof label);
|
|
label.d_secsize = DEV_BSIZE;
|
|
label.d_nsectors = adp->sectors;
|
|
label.d_ntracks = adp->heads;
|
|
label.d_ncylinders = adp->cylinders;
|
|
label.d_secpercyl = adp->sectors * adp->heads;
|
|
label.d_secperunit = adp->total_secs;
|
|
|
|
error = dsopen("ad", dev, fmt, 0, &adp->slices, &label, ad_strategy,
|
|
(ds_setgeom_t *)NULL, &ad_cdevsw);
|
|
|
|
adp->flags &= ~AD_F_LABELLING;
|
|
ad_sleep(adp, "adop2");
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
adclose(dev_t dev, int32_t flags, int32_t fmt, struct proc *p)
|
|
{
|
|
int32_t lun = UNIT(dev);
|
|
struct ad_softc *adp;
|
|
|
|
#ifdef AD_DEBUG
|
|
printf("adclose: lun=%d adnlun=%d\n", lun, adnlun);
|
|
#endif
|
|
if (lun >= adnlun || !(adp = adtab[lun]))
|
|
return ENXIO;
|
|
|
|
dsclose(dev, fmt, adp->slices);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adread(dev_t dev, struct uio *uio, int32_t ioflag)
|
|
{
|
|
return physio(adstrategy, NULL, dev, 1, minphys, uio);
|
|
}
|
|
|
|
static int
|
|
adwrite(dev_t dev, struct uio *uio, int32_t ioflag)
|
|
{
|
|
return physio(adstrategy, NULL, dev, 0, minphys, uio);
|
|
}
|
|
|
|
static int
|
|
adioctl(dev_t dev, u_long cmd, caddr_t addr, int32_t flags, struct proc *p)
|
|
{
|
|
struct ad_softc *adp;
|
|
int32_t lun = UNIT(dev);
|
|
int32_t error = 0;
|
|
|
|
if (lun >= adnlun || !(adp = adtab[lun]))
|
|
return ENXIO;
|
|
|
|
ad_sleep(adp, "adioct");
|
|
error = dsioctl("sd", dev, cmd, addr, flags, &adp->slices,
|
|
ad_strategy, (ds_setgeom_t *)NULL);
|
|
|
|
if (error != ENOIOCTL)
|
|
return error;
|
|
return ENOTTY;
|
|
}
|
|
|
|
static void
|
|
adstrategy(struct buf *bp)
|
|
{
|
|
struct ad_softc *adp;
|
|
int32_t lun = UNIT(bp->b_dev);
|
|
int32_t s;
|
|
|
|
#ifdef AD_DEBUG
|
|
printf("adstrategy: entered\n");
|
|
#endif
|
|
if (lun >= adnlun || bp->b_blkno < 0 || !(adp = adtab[lun])
|
|
|| bp->b_bcount % DEV_BSIZE != 0) {
|
|
bp->b_error = EINVAL;
|
|
bp->b_flags |= B_ERROR;
|
|
goto done;
|
|
}
|
|
|
|
if (dscheck(bp, adp->slices) <= 0)
|
|
goto done;
|
|
|
|
|
|
/* hang around if somebody else is labelling */
|
|
if (adp->flags & AD_F_LABELLING)
|
|
ad_sleep(adp, "adlab");
|
|
|
|
s = splbio();
|
|
bufqdisksort(&adp->queue, bp);
|
|
|
|
if (!adp->active)
|
|
ad_start(adp);
|
|
|
|
if (adp->controller->active == ATA_IDLE)
|
|
ata_start(adp->controller);
|
|
|
|
splx(s);
|
|
return;
|
|
|
|
done:
|
|
s = splbio();
|
|
biodone(bp);
|
|
splx(s);
|
|
}
|
|
|
|
static int
|
|
adpsize(dev_t dev)
|
|
{
|
|
struct ad_softc *adp;
|
|
int32_t lun = UNIT(dev);
|
|
|
|
if (lun >= adnlun || !(adp = adtab[lun]))
|
|
return -1;
|
|
return dssize(dev, &adp->slices, adopen, adclose);
|
|
}
|
|
|
|
static void
|
|
ad_strategy(struct buf *bp)
|
|
{
|
|
adstrategy(bp);
|
|
}
|
|
|
|
static void
|
|
ad_start(struct ad_softc *adp)
|
|
{
|
|
struct buf *bp;
|
|
|
|
#ifdef AD_DEBUG
|
|
printf("ad_start:\n");
|
|
#endif
|
|
if (adp->active) {
|
|
printf("ad_start: should newer be called when active\n"); /* SOS */
|
|
return;
|
|
}
|
|
if (!(bp = bufq_first(&adp->queue)))
|
|
return;
|
|
|
|
/* remove from drive queue */
|
|
bufq_remove(&adp->queue, bp);
|
|
bp->b_driver1 = adp;
|
|
|
|
/* link onto controller queue */
|
|
bufq_insert_tail(&adp->controller->ata_queue, bp);
|
|
|
|
/* mark the drive as busy */
|
|
adp->active = 1;
|
|
}
|
|
|
|
void
|
|
ad_transfer(struct buf *bp)
|
|
{
|
|
struct ad_softc *adp;
|
|
u_int32_t blknum, secsprcyl;
|
|
u_int32_t cylinder, head, sector, count, command;
|
|
|
|
/* get request params */
|
|
adp = bp->b_driver1;
|
|
|
|
/* calculate transfer details */
|
|
blknum = bp->b_pblkno + (adp->donecount / DEV_BSIZE);
|
|
|
|
#ifdef AD_DEBUG
|
|
printf("ad_transfer: blknum=%d\n", blknum);
|
|
#endif
|
|
if (adp->donecount == 0) {
|
|
|
|
/* setup transfer parameters */
|
|
adp->bytecount = bp->b_bcount;
|
|
count = howmany(adp->bytecount, DEV_BSIZE);
|
|
|
|
if (adp->flags & AD_F_USE_LBA) {
|
|
sector = (blknum >> 0) & 0xff;
|
|
cylinder = (blknum >> 8) & 0xffff;
|
|
head = ((blknum >> 24) & 0xf) | ATA_D_LBA;
|
|
}
|
|
else {
|
|
secsprcyl = adp->sectors * adp->heads;
|
|
cylinder = blknum / secsprcyl;
|
|
head = (blknum % secsprcyl) / adp->sectors;
|
|
sector = (blknum % adp->sectors) + 1;
|
|
}
|
|
|
|
/* setup first transfer length */
|
|
adp->currentsize = min(adp->bytecount, adp->transfersize);
|
|
|
|
devstat_start_transaction(&adp->stats);
|
|
|
|
/* does this drive & transfer work with DMA ? */
|
|
adp->flags &= ~AD_F_DMA_USED;
|
|
if ((adp->flags & AD_F_DMA_ENABLED) &&
|
|
!ata_dmasetup(adp->controller, adp->unit,
|
|
(void *)bp->b_data, adp->bytecount,
|
|
(bp->b_flags & B_READ))) {
|
|
adp->flags |= AD_F_DMA_USED;
|
|
command = (bp->b_flags&B_READ) ? ATA_C_READ_DMA : ATA_C_WRITE_DMA;
|
|
adp->currentsize = adp->bytecount;
|
|
}
|
|
/* does this drive support multi sector transfers ? */
|
|
else if (adp->currentsize > DEV_BSIZE)
|
|
command = (bp->b_flags&B_READ) ? ATA_C_READ_MULTI:ATA_C_WRITE_MULTI;
|
|
else
|
|
command = (bp->b_flags&B_READ) ? ATA_C_READ : ATA_C_WRITE;
|
|
|
|
ata_command(adp->controller, adp->unit, command, cylinder, head,
|
|
sector, count, 0, ATA_IMMEDIATE);
|
|
}
|
|
|
|
/* if this is a DMA transaction start it, return and wait for interrupt */
|
|
if (adp->flags & AD_F_DMA_USED) {
|
|
ata_dmastart(adp->controller, adp->unit);
|
|
#ifdef AD_DEBUG
|
|
printf("ad_transfer: return waiting for DMA interrupt\n");
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
/* calculate this transfer length */
|
|
adp->currentsize = min(adp->bytecount, adp->transfersize);
|
|
|
|
/* if this is a PIO read operation, return and wait for interrupt */
|
|
if (bp->b_flags & B_READ) {
|
|
#ifdef AD_DEBUG
|
|
printf("ad_transfer: return waiting for PIO read interrupt\n");
|
|
#endif
|
|
return;
|
|
}
|
|
|
|
/* ready to write PIO data ? */
|
|
if (ata_wait(adp->controller, adp->unit,
|
|
ATA_S_DRDY | ATA_S_DSC | ATA_S_DRQ) < 0) {
|
|
printf("ad_transfer: timeout waiting for DRQ");
|
|
}
|
|
|
|
/* output the data */
|
|
#if 0
|
|
outsw(adp->controller->ioaddr + ATA_DATA,
|
|
(void *)((int32_t)bp->b_data + adp->donecount),
|
|
adp->currentsize / sizeof(int16_t));
|
|
#else
|
|
outsl(adp->controller->ioaddr + ATA_DATA,
|
|
(void *)((int32_t)bp->b_data + adp->donecount),
|
|
adp->currentsize / sizeof(int32_t));
|
|
#endif
|
|
adp->bytecount -= adp->currentsize;
|
|
#ifdef AD_DEBUG
|
|
printf("ad_transfer: return wrote data\n");
|
|
#endif
|
|
}
|
|
|
|
int32_t
|
|
ad_interrupt(struct buf *bp)
|
|
{
|
|
struct ad_softc *adp = bp->b_driver1;
|
|
int32_t dma_stat = 0;
|
|
|
|
/* finish DMA transfer */
|
|
if (adp->flags & AD_F_DMA_USED) {
|
|
if (!(ata_dmastatus(adp->controller, adp->unit) & ATA_BMSTAT_INTERRUPT)){
|
|
printf("extra SMP interrupt\n");
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
dma_stat = ata_dmadone(adp->controller, adp->unit);
|
|
}
|
|
|
|
/* get drive status */
|
|
if (ata_wait(adp->controller, adp->unit, 0) < 0)
|
|
printf("ad_interrupt: timeout waiting for status");
|
|
if (adp->controller->status & (ATA_S_ERROR | ATA_S_CORR) ||
|
|
(adp->flags & AD_F_DMA_USED && dma_stat != ATA_BMSTAT_INTERRUPT)) {
|
|
oops:
|
|
printf("ad%d: status=%02x error=%02x\n",
|
|
adp->lun, adp->controller->status, adp->controller->error);
|
|
if (adp->controller->status & ATA_S_ERROR) {
|
|
printf("ad_interrupt: hard error\n");
|
|
bp->b_error = EIO;
|
|
bp->b_flags |= B_ERROR;
|
|
}
|
|
if (adp->controller->status & ATA_S_CORR)
|
|
printf("ad_interrupt: soft ECC\n");
|
|
}
|
|
|
|
/* if this was a PIO read operation, get the data */
|
|
if (adp->active && !(adp->flags & AD_F_DMA_USED) &&
|
|
((bp->b_flags & (B_READ | B_ERROR)) == B_READ)) {
|
|
|
|
/* ready to receive data? */
|
|
if ((adp->controller->status & (ATA_S_DRDY | ATA_S_DSC | ATA_S_DRQ))
|
|
!= (ATA_S_DRDY | ATA_S_DSC | ATA_S_DRQ))
|
|
printf("ad_interrupt: read interrupt arrived early");
|
|
|
|
if (ata_wait(adp->controller, adp->unit,
|
|
ATA_S_DRDY | ATA_S_DSC | ATA_S_DRQ) != 0){
|
|
printf("ad_interrupt: read error detected late");
|
|
goto oops;
|
|
}
|
|
|
|
/* data ready, read in */
|
|
#if 0
|
|
insw(adp->controller->ioaddr + ATA_DATA,
|
|
(void *)((int32_t)bp->b_data + adp->donecount),
|
|
adp->currentsize / sizeof(int16_t));
|
|
#else
|
|
insl(adp->controller->ioaddr + ATA_DATA,
|
|
(void *)((int32_t)bp->b_data + adp->donecount),
|
|
adp->currentsize / sizeof(int32_t));
|
|
#endif
|
|
adp->bytecount -= adp->currentsize;
|
|
#ifdef AD_DEBUG
|
|
printf("ad_interrupt: read in data\n");
|
|
#endif
|
|
}
|
|
|
|
/* if this was a DMA operation finish up */
|
|
if (adp->active && (adp->flags & AD_F_DMA_USED) && !(bp->b_flags & B_ERROR))
|
|
adp->bytecount -= adp->currentsize;
|
|
|
|
/* finish up this tranfer, check for more work on this buffer */
|
|
if (adp->controller->active == ATA_ACTIVE_ATA) {
|
|
if ((bp->b_flags & B_ERROR) == 0) {
|
|
adp->donecount += adp->currentsize;
|
|
#ifdef AD_DEBUG
|
|
printf("ad_interrupt: %s op OK\n", (bp->b_flags & B_READ)?"R":"W");
|
|
#endif
|
|
if (adp->bytecount > 0) {
|
|
ad_transfer(bp);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
}
|
|
bufq_remove(&adp->controller->ata_queue, bp);
|
|
bp->b_resid = bp->b_bcount - adp->donecount;
|
|
biodone(bp);
|
|
devstat_end_transaction(&adp->stats, bp->b_bcount - bp->b_resid,
|
|
DEVSTAT_TAG_NONE,
|
|
(bp->b_flags & B_READ) ?
|
|
DEVSTAT_READ : DEVSTAT_WRITE);
|
|
adp->donecount = 0;
|
|
adp->active = 0;
|
|
}
|
|
ad_start(adp);
|
|
#ifdef AD_DEBUG
|
|
printf("ad_interrupt: completed\n");
|
|
#endif
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
static void
|
|
ad_sleep(struct ad_softc *adp, int8_t *mesg)
|
|
{
|
|
int32_t s = splbio();
|
|
|
|
while (adp->controller->active != ATA_IDLE)
|
|
tsleep((caddr_t)&adp->controller->active, PZERO - 1, mesg, 1);
|
|
splx(s);
|
|
}
|
|
|
|
static int8_t
|
|
ad_version(u_int16_t version)
|
|
{
|
|
int32_t bit;
|
|
|
|
if (version == 0xffff)
|
|
return '?';
|
|
for (bit = 15; bit >= 0; bit--)
|
|
if (version & (1<<bit))
|
|
return ('0' + bit);
|
|
return '?';
|
|
}
|
|
|
|
static void
|
|
ad_drvinit(void)
|
|
{
|
|
static ad_devsw_installed = 0;
|
|
|
|
if (!ad_devsw_installed) {
|
|
cdevsw_add_generic(BDEV_MAJOR, CDEV_MAJOR, &ad_cdevsw);
|
|
cdevsw_add_generic(0, 3, &ad_cdevsw); /* grap wd entries too */
|
|
ad_devsw_installed = 1;
|
|
}
|
|
/* register callback for when interrupts are enabled */
|
|
if (!(ad_attach_hook =
|
|
(struct intr_config_hook *)malloc(sizeof(struct intr_config_hook),
|
|
M_TEMP, M_NOWAIT))) {
|
|
printf("ad: malloc attach_hook failed\n");
|
|
return;
|
|
}
|
|
bzero(ad_attach_hook, sizeof(struct intr_config_hook));
|
|
|
|
ad_attach_hook->ich_func = ad_attach;
|
|
if (config_intrhook_establish(ad_attach_hook) != 0) {
|
|
printf("ad: config_intrhook_establish failed\n");
|
|
free(ad_attach_hook, M_TEMP);
|
|
}
|
|
}
|
|
|
|
SYSINIT(addev, SI_SUB_DRIVERS, SI_ORDER_SECOND, ad_drvinit, NULL)
|
|
#endif /* NATA && NATADISK */
|