232a9d55fb
without waiting for device readiness (or at least not updating FIS receive area in time). To workaround that, special quirk was added earlier to wait for the FIS receive area update. But it was found that under same PCI ID 0x91231b4b and revision 0x11 there are two completely different chip versions (firmware?): HBA and RAID. The problem is that RAID version in some cases, such as hot-plug, does not update FIS receive area at all! To workaround that, differentiate the chip versions by their capabilities, and, if RAID version found, skip FIS receive area update waiting and read device signature from the PxSIG register instead. This method doesn't work for HBA version when PMP attached, so keep using previous workaround there.
2985 lines
88 KiB
C
2985 lines
88 KiB
C
/*-
|
|
* Copyright (c) 2009 Alexander Motin <mav@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/module.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <vm/uma.h>
|
|
#include <machine/stdarg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/led/led.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include "ahci.h"
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
#include <cam/cam_debug.h>
|
|
|
|
/* local prototypes */
|
|
static int ahci_setup_interrupt(device_t dev);
|
|
static void ahci_intr(void *data);
|
|
static void ahci_intr_one(void *data);
|
|
static int ahci_suspend(device_t dev);
|
|
static int ahci_resume(device_t dev);
|
|
static int ahci_ch_init(device_t dev);
|
|
static int ahci_ch_deinit(device_t dev);
|
|
static int ahci_ch_suspend(device_t dev);
|
|
static int ahci_ch_resume(device_t dev);
|
|
static void ahci_ch_pm(void *arg);
|
|
static void ahci_ch_intr_locked(void *data);
|
|
static void ahci_ch_intr(void *data);
|
|
static void ahci_ch_led(void *priv, int onoff);
|
|
static int ahci_ctlr_reset(device_t dev);
|
|
static int ahci_ctlr_setup(device_t dev);
|
|
static void ahci_begin_transaction(device_t dev, union ccb *ccb);
|
|
static void ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error);
|
|
static void ahci_execute_transaction(struct ahci_slot *slot);
|
|
static void ahci_timeout(struct ahci_slot *slot);
|
|
static void ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et);
|
|
static int ahci_setup_fis(device_t dev, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag);
|
|
static void ahci_dmainit(device_t dev);
|
|
static void ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error);
|
|
static void ahci_dmafini(device_t dev);
|
|
static void ahci_slotsalloc(device_t dev);
|
|
static void ahci_slotsfree(device_t dev);
|
|
static void ahci_reset(device_t dev);
|
|
static void ahci_start(device_t dev, int fbs);
|
|
static void ahci_stop(device_t dev);
|
|
static void ahci_clo(device_t dev);
|
|
static void ahci_start_fr(device_t dev);
|
|
static void ahci_stop_fr(device_t dev);
|
|
|
|
static int ahci_sata_connect(struct ahci_channel *ch);
|
|
static int ahci_sata_phy_reset(device_t dev);
|
|
static int ahci_wait_ready(device_t dev, int t, int t0);
|
|
|
|
static void ahci_issue_recovery(device_t dev);
|
|
static void ahci_process_read_log(device_t dev, union ccb *ccb);
|
|
static void ahci_process_request_sense(device_t dev, union ccb *ccb);
|
|
|
|
static void ahciaction(struct cam_sim *sim, union ccb *ccb);
|
|
static void ahcipoll(struct cam_sim *sim);
|
|
|
|
MALLOC_DEFINE(M_AHCI, "AHCI driver", "AHCI driver data buffers");
|
|
|
|
static struct {
|
|
uint32_t id;
|
|
uint8_t rev;
|
|
const char *name;
|
|
int quirks;
|
|
#define AHCI_Q_NOFORCE 1
|
|
#define AHCI_Q_NOPMP 2
|
|
#define AHCI_Q_NONCQ 4
|
|
#define AHCI_Q_1CH 8
|
|
#define AHCI_Q_2CH 16
|
|
#define AHCI_Q_4CH 32
|
|
#define AHCI_Q_EDGEIS 64
|
|
#define AHCI_Q_SATA2 128
|
|
#define AHCI_Q_NOBSYRES 256
|
|
#define AHCI_Q_NOAA 512
|
|
#define AHCI_Q_NOCOUNT 1024
|
|
#define AHCI_Q_ALTSIG 2048
|
|
} ahci_ids[] = {
|
|
{0x43801002, 0x00, "ATI IXP600", 0},
|
|
{0x43901002, 0x00, "ATI IXP700", 0},
|
|
{0x43911002, 0x00, "ATI IXP700", 0},
|
|
{0x43921002, 0x00, "ATI IXP700", 0},
|
|
{0x43931002, 0x00, "ATI IXP700", 0},
|
|
{0x43941002, 0x00, "ATI IXP800", 0},
|
|
{0x43951002, 0x00, "ATI IXP800", 0},
|
|
{0x26528086, 0x00, "Intel ICH6", AHCI_Q_NOFORCE},
|
|
{0x26538086, 0x00, "Intel ICH6M", AHCI_Q_NOFORCE},
|
|
{0x26818086, 0x00, "Intel ESB2", 0},
|
|
{0x26828086, 0x00, "Intel ESB2", 0},
|
|
{0x26838086, 0x00, "Intel ESB2", 0},
|
|
{0x27c18086, 0x00, "Intel ICH7", 0},
|
|
{0x27c38086, 0x00, "Intel ICH7", 0},
|
|
{0x27c58086, 0x00, "Intel ICH7M", 0},
|
|
{0x27c68086, 0x00, "Intel ICH7M", 0},
|
|
{0x28218086, 0x00, "Intel ICH8", 0},
|
|
{0x28228086, 0x00, "Intel ICH8", 0},
|
|
{0x28248086, 0x00, "Intel ICH8", 0},
|
|
{0x28298086, 0x00, "Intel ICH8M", 0},
|
|
{0x282a8086, 0x00, "Intel ICH8M", 0},
|
|
{0x29228086, 0x00, "Intel ICH9", 0},
|
|
{0x29238086, 0x00, "Intel ICH9", 0},
|
|
{0x29248086, 0x00, "Intel ICH9", 0},
|
|
{0x29258086, 0x00, "Intel ICH9", 0},
|
|
{0x29278086, 0x00, "Intel ICH9", 0},
|
|
{0x29298086, 0x00, "Intel ICH9M", 0},
|
|
{0x292a8086, 0x00, "Intel ICH9M", 0},
|
|
{0x292b8086, 0x00, "Intel ICH9M", 0},
|
|
{0x292c8086, 0x00, "Intel ICH9M", 0},
|
|
{0x292f8086, 0x00, "Intel ICH9M", 0},
|
|
{0x294d8086, 0x00, "Intel ICH9", 0},
|
|
{0x294e8086, 0x00, "Intel ICH9M", 0},
|
|
{0x3a058086, 0x00, "Intel ICH10", 0},
|
|
{0x3a228086, 0x00, "Intel ICH10", 0},
|
|
{0x3a258086, 0x00, "Intel ICH10", 0},
|
|
{0x3b228086, 0x00, "Intel 5 Series/3400 Series", 0},
|
|
{0x3b238086, 0x00, "Intel 5 Series/3400 Series", 0},
|
|
{0x3b258086, 0x00, "Intel 5 Series/3400 Series", 0},
|
|
{0x3b298086, 0x00, "Intel 5 Series/3400 Series", 0},
|
|
{0x3b2c8086, 0x00, "Intel 5 Series/3400 Series", 0},
|
|
{0x3b2f8086, 0x00, "Intel 5 Series/3400 Series", 0},
|
|
{0x1c028086, 0x00, "Intel Cougar Point", 0},
|
|
{0x1c038086, 0x00, "Intel Cougar Point", 0},
|
|
{0x1c048086, 0x00, "Intel Cougar Point", 0},
|
|
{0x1c058086, 0x00, "Intel Cougar Point", 0},
|
|
{0x1d028086, 0x00, "Intel Patsburg", 0},
|
|
{0x1d048086, 0x00, "Intel Patsburg", 0},
|
|
{0x1d068086, 0x00, "Intel Patsburg", 0},
|
|
{0x1e028086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e038086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e048086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e058086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e068086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e078086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e0e8086, 0x00, "Intel Panther Point", 0},
|
|
{0x1e0f8086, 0x00, "Intel Panther Point", 0},
|
|
{0x23238086, 0x00, "Intel DH89xxCC", 0},
|
|
{0x2361197b, 0x00, "JMicron JMB361", AHCI_Q_NOFORCE},
|
|
{0x2363197b, 0x00, "JMicron JMB363", AHCI_Q_NOFORCE},
|
|
{0x2365197b, 0x00, "JMicron JMB365", AHCI_Q_NOFORCE},
|
|
{0x2366197b, 0x00, "JMicron JMB366", AHCI_Q_NOFORCE},
|
|
{0x2368197b, 0x00, "JMicron JMB368", AHCI_Q_NOFORCE},
|
|
{0x611111ab, 0x00, "Marvell 88SX6111", AHCI_Q_NOFORCE | AHCI_Q_1CH |
|
|
AHCI_Q_EDGEIS},
|
|
{0x612111ab, 0x00, "Marvell 88SX6121", AHCI_Q_NOFORCE | AHCI_Q_2CH |
|
|
AHCI_Q_EDGEIS | AHCI_Q_NONCQ | AHCI_Q_NOCOUNT},
|
|
{0x614111ab, 0x00, "Marvell 88SX6141", AHCI_Q_NOFORCE | AHCI_Q_4CH |
|
|
AHCI_Q_EDGEIS | AHCI_Q_NONCQ | AHCI_Q_NOCOUNT},
|
|
{0x614511ab, 0x00, "Marvell 88SX6145", AHCI_Q_NOFORCE | AHCI_Q_4CH |
|
|
AHCI_Q_EDGEIS | AHCI_Q_NONCQ | AHCI_Q_NOCOUNT},
|
|
{0x91201b4b, 0x00, "Marvell 88SE912x", AHCI_Q_EDGEIS|AHCI_Q_NOBSYRES},
|
|
{0x91231b4b, 0x11, "Marvell 88SE912x", AHCI_Q_NOBSYRES|AHCI_Q_ALTSIG},
|
|
{0x91231b4b, 0x00, "Marvell 88SE912x", AHCI_Q_EDGEIS|AHCI_Q_SATA2|AHCI_Q_NOBSYRES},
|
|
{0x91821b4b, 0x00, "Marvell 88SE9182", AHCI_Q_NOBSYRES},
|
|
{0x06201103, 0x00, "HighPoint RocketRAID 620", AHCI_Q_NOBSYRES},
|
|
{0x06201b4b, 0x00, "HighPoint RocketRAID 620", AHCI_Q_NOBSYRES},
|
|
{0x06221103, 0x00, "HighPoint RocketRAID 622", AHCI_Q_NOBSYRES},
|
|
{0x06221b4b, 0x00, "HighPoint RocketRAID 622", AHCI_Q_NOBSYRES},
|
|
{0x06401103, 0x00, "HighPoint RocketRAID 640", AHCI_Q_NOBSYRES},
|
|
{0x06401b4b, 0x00, "HighPoint RocketRAID 640", AHCI_Q_NOBSYRES},
|
|
{0x06441103, 0x00, "HighPoint RocketRAID 644", AHCI_Q_NOBSYRES},
|
|
{0x06441b4b, 0x00, "HighPoint RocketRAID 644", AHCI_Q_NOBSYRES},
|
|
{0x044c10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x044d10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x044e10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x044f10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x045c10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x045d10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x045e10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x045f10de, 0x00, "NVIDIA MCP65", AHCI_Q_NOAA},
|
|
{0x055010de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055110de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055210de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055310de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055410de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055510de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055610de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055710de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055810de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055910de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055A10de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x055B10de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x058410de, 0x00, "NVIDIA MCP67", AHCI_Q_NOAA},
|
|
{0x07f010de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f110de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f210de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f310de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f410de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f510de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f610de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f710de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f810de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07f910de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07fa10de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x07fb10de, 0x00, "NVIDIA MCP73", AHCI_Q_NOAA},
|
|
{0x0ad010de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad110de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad210de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad310de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad410de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad510de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad610de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad710de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad810de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ad910de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ada10de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0adb10de, 0x00, "NVIDIA MCP77", AHCI_Q_NOAA},
|
|
{0x0ab410de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0ab510de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0ab610de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0ab710de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0ab810de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0ab910de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0aba10de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0abb10de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0abc10de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0abd10de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0abe10de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0abf10de, 0x00, "NVIDIA MCP79", AHCI_Q_NOAA},
|
|
{0x0d8410de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8510de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8610de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8710de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8810de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8910de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8a10de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8b10de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8c10de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8d10de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8e10de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x0d8f10de, 0x00, "NVIDIA MCP89", AHCI_Q_NOAA},
|
|
{0x33491106, 0x00, "VIA VT8251", AHCI_Q_NOPMP|AHCI_Q_NONCQ},
|
|
{0x62871106, 0x00, "VIA VT8251", AHCI_Q_NOPMP|AHCI_Q_NONCQ},
|
|
{0x11841039, 0x00, "SiS 966", 0},
|
|
{0x11851039, 0x00, "SiS 968", 0},
|
|
{0x01861039, 0x00, "SiS 968", 0},
|
|
{0x00000000, 0x00, NULL, 0}
|
|
};
|
|
|
|
#define recovery_type spriv_field0
|
|
#define RECOVERY_NONE 0
|
|
#define RECOVERY_READ_LOG 1
|
|
#define RECOVERY_REQUEST_SENSE 2
|
|
#define recovery_slot spriv_field1
|
|
|
|
static int
|
|
ahci_probe(device_t dev)
|
|
{
|
|
char buf[64];
|
|
int i, valid = 0;
|
|
uint32_t devid = pci_get_devid(dev);
|
|
uint8_t revid = pci_get_revid(dev);
|
|
|
|
/* Is this a possible AHCI candidate? */
|
|
if (pci_get_class(dev) == PCIC_STORAGE &&
|
|
pci_get_subclass(dev) == PCIS_STORAGE_SATA &&
|
|
pci_get_progif(dev) == PCIP_STORAGE_SATA_AHCI_1_0)
|
|
valid = 1;
|
|
/* Is this a known AHCI chip? */
|
|
for (i = 0; ahci_ids[i].id != 0; i++) {
|
|
if (ahci_ids[i].id == devid &&
|
|
ahci_ids[i].rev <= revid &&
|
|
(valid || !(ahci_ids[i].quirks & AHCI_Q_NOFORCE))) {
|
|
/* Do not attach JMicrons with single PCI function. */
|
|
if (pci_get_vendor(dev) == 0x197b &&
|
|
(pci_read_config(dev, 0xdf, 1) & 0x40) == 0)
|
|
return (ENXIO);
|
|
snprintf(buf, sizeof(buf), "%s AHCI SATA controller",
|
|
ahci_ids[i].name);
|
|
device_set_desc_copy(dev, buf);
|
|
return (BUS_PROBE_VENDOR);
|
|
}
|
|
}
|
|
if (!valid)
|
|
return (ENXIO);
|
|
device_set_desc_copy(dev, "AHCI SATA controller");
|
|
return (BUS_PROBE_VENDOR);
|
|
}
|
|
|
|
static int
|
|
ahci_ata_probe(device_t dev)
|
|
{
|
|
char buf[64];
|
|
int i;
|
|
uint32_t devid = pci_get_devid(dev);
|
|
uint8_t revid = pci_get_revid(dev);
|
|
|
|
if ((intptr_t)device_get_ivars(dev) >= 0)
|
|
return (ENXIO);
|
|
/* Is this a known AHCI chip? */
|
|
for (i = 0; ahci_ids[i].id != 0; i++) {
|
|
if (ahci_ids[i].id == devid &&
|
|
ahci_ids[i].rev <= revid) {
|
|
snprintf(buf, sizeof(buf), "%s AHCI SATA controller",
|
|
ahci_ids[i].name);
|
|
device_set_desc_copy(dev, buf);
|
|
return (BUS_PROBE_VENDOR);
|
|
}
|
|
}
|
|
device_set_desc_copy(dev, "AHCI SATA controller");
|
|
return (BUS_PROBE_VENDOR);
|
|
}
|
|
|
|
static int
|
|
ahci_attach(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
device_t child;
|
|
int error, unit, speed, i;
|
|
uint32_t devid = pci_get_devid(dev);
|
|
uint8_t revid = pci_get_revid(dev);
|
|
u_int32_t version;
|
|
|
|
ctlr->dev = dev;
|
|
i = 0;
|
|
while (ahci_ids[i].id != 0 &&
|
|
(ahci_ids[i].id != devid ||
|
|
ahci_ids[i].rev > revid))
|
|
i++;
|
|
ctlr->quirks = ahci_ids[i].quirks;
|
|
resource_int_value(device_get_name(dev),
|
|
device_get_unit(dev), "ccc", &ctlr->ccc);
|
|
/* if we have a memory BAR(5) we are likely on an AHCI part */
|
|
ctlr->r_rid = PCIR_BAR(5);
|
|
if (!(ctlr->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&ctlr->r_rid, RF_ACTIVE)))
|
|
return ENXIO;
|
|
/* Setup our own memory management for channels. */
|
|
ctlr->sc_iomem.rm_start = rman_get_start(ctlr->r_mem);
|
|
ctlr->sc_iomem.rm_end = rman_get_end(ctlr->r_mem);
|
|
ctlr->sc_iomem.rm_type = RMAN_ARRAY;
|
|
ctlr->sc_iomem.rm_descr = "I/O memory addresses";
|
|
if ((error = rman_init(&ctlr->sc_iomem)) != 0) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
|
|
return (error);
|
|
}
|
|
if ((error = rman_manage_region(&ctlr->sc_iomem,
|
|
rman_get_start(ctlr->r_mem), rman_get_end(ctlr->r_mem))) != 0) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
|
|
rman_fini(&ctlr->sc_iomem);
|
|
return (error);
|
|
}
|
|
pci_enable_busmaster(dev);
|
|
/* Reset controller */
|
|
if ((error = ahci_ctlr_reset(dev)) != 0) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
|
|
rman_fini(&ctlr->sc_iomem);
|
|
return (error);
|
|
};
|
|
/* Get the HW capabilities */
|
|
version = ATA_INL(ctlr->r_mem, AHCI_VS);
|
|
ctlr->caps = ATA_INL(ctlr->r_mem, AHCI_CAP);
|
|
if (version >= 0x00010020)
|
|
ctlr->caps2 = ATA_INL(ctlr->r_mem, AHCI_CAP2);
|
|
if (ctlr->caps & AHCI_CAP_EMS)
|
|
ctlr->capsem = ATA_INL(ctlr->r_mem, AHCI_EM_CTL);
|
|
ctlr->ichannels = ATA_INL(ctlr->r_mem, AHCI_PI);
|
|
|
|
/* Identify and set separate quirks for HBA and RAID f/w Marvells. */
|
|
if ((ctlr->quirks & AHCI_Q_NOBSYRES) &&
|
|
(ctlr->quirks & AHCI_Q_ALTSIG) &&
|
|
(ctlr->caps & AHCI_CAP_SPM) == 0)
|
|
ctlr->quirks &= ~AHCI_Q_NOBSYRES;
|
|
|
|
if (ctlr->quirks & AHCI_Q_1CH) {
|
|
ctlr->caps &= ~AHCI_CAP_NPMASK;
|
|
ctlr->ichannels &= 0x01;
|
|
}
|
|
if (ctlr->quirks & AHCI_Q_2CH) {
|
|
ctlr->caps &= ~AHCI_CAP_NPMASK;
|
|
ctlr->caps |= 1;
|
|
ctlr->ichannels &= 0x03;
|
|
}
|
|
if (ctlr->quirks & AHCI_Q_4CH) {
|
|
ctlr->caps &= ~AHCI_CAP_NPMASK;
|
|
ctlr->caps |= 3;
|
|
ctlr->ichannels &= 0x0f;
|
|
}
|
|
ctlr->channels = MAX(flsl(ctlr->ichannels),
|
|
(ctlr->caps & AHCI_CAP_NPMASK) + 1);
|
|
if (ctlr->quirks & AHCI_Q_NOPMP)
|
|
ctlr->caps &= ~AHCI_CAP_SPM;
|
|
if (ctlr->quirks & AHCI_Q_NONCQ)
|
|
ctlr->caps &= ~AHCI_CAP_SNCQ;
|
|
if ((ctlr->caps & AHCI_CAP_CCCS) == 0)
|
|
ctlr->ccc = 0;
|
|
mtx_init(&ctlr->em_mtx, "AHCI EM lock", NULL, MTX_DEF);
|
|
ctlr->emloc = ATA_INL(ctlr->r_mem, AHCI_EM_LOC);
|
|
ahci_ctlr_setup(dev);
|
|
/* Setup interrupts. */
|
|
if (ahci_setup_interrupt(dev)) {
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
|
|
rman_fini(&ctlr->sc_iomem);
|
|
return ENXIO;
|
|
}
|
|
/* Announce HW capabilities. */
|
|
speed = (ctlr->caps & AHCI_CAP_ISS) >> AHCI_CAP_ISS_SHIFT;
|
|
device_printf(dev,
|
|
"AHCI v%x.%02x with %d %sGbps ports, Port Multiplier %s%s\n",
|
|
((version >> 20) & 0xf0) + ((version >> 16) & 0x0f),
|
|
((version >> 4) & 0xf0) + (version & 0x0f),
|
|
(ctlr->caps & AHCI_CAP_NPMASK) + 1,
|
|
((speed == 1) ? "1.5":((speed == 2) ? "3":
|
|
((speed == 3) ? "6":"?"))),
|
|
(ctlr->caps & AHCI_CAP_SPM) ?
|
|
"supported" : "not supported",
|
|
(ctlr->caps & AHCI_CAP_FBSS) ?
|
|
" with FBS" : "");
|
|
if (bootverbose) {
|
|
device_printf(dev, "Caps:%s%s%s%s%s%s%s%s %sGbps",
|
|
(ctlr->caps & AHCI_CAP_64BIT) ? " 64bit":"",
|
|
(ctlr->caps & AHCI_CAP_SNCQ) ? " NCQ":"",
|
|
(ctlr->caps & AHCI_CAP_SSNTF) ? " SNTF":"",
|
|
(ctlr->caps & AHCI_CAP_SMPS) ? " MPS":"",
|
|
(ctlr->caps & AHCI_CAP_SSS) ? " SS":"",
|
|
(ctlr->caps & AHCI_CAP_SALP) ? " ALP":"",
|
|
(ctlr->caps & AHCI_CAP_SAL) ? " AL":"",
|
|
(ctlr->caps & AHCI_CAP_SCLO) ? " CLO":"",
|
|
((speed == 1) ? "1.5":((speed == 2) ? "3":
|
|
((speed == 3) ? "6":"?"))));
|
|
printf("%s%s%s%s%s%s %dcmd%s%s%s %dports\n",
|
|
(ctlr->caps & AHCI_CAP_SAM) ? " AM":"",
|
|
(ctlr->caps & AHCI_CAP_SPM) ? " PM":"",
|
|
(ctlr->caps & AHCI_CAP_FBSS) ? " FBS":"",
|
|
(ctlr->caps & AHCI_CAP_PMD) ? " PMD":"",
|
|
(ctlr->caps & AHCI_CAP_SSC) ? " SSC":"",
|
|
(ctlr->caps & AHCI_CAP_PSC) ? " PSC":"",
|
|
((ctlr->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1,
|
|
(ctlr->caps & AHCI_CAP_CCCS) ? " CCC":"",
|
|
(ctlr->caps & AHCI_CAP_EMS) ? " EM":"",
|
|
(ctlr->caps & AHCI_CAP_SXS) ? " eSATA":"",
|
|
(ctlr->caps & AHCI_CAP_NPMASK) + 1);
|
|
}
|
|
if (bootverbose && version >= 0x00010020) {
|
|
device_printf(dev, "Caps2:%s%s%s\n",
|
|
(ctlr->caps2 & AHCI_CAP2_APST) ? " APST":"",
|
|
(ctlr->caps2 & AHCI_CAP2_NVMP) ? " NVMP":"",
|
|
(ctlr->caps2 & AHCI_CAP2_BOH) ? " BOH":"");
|
|
}
|
|
if (bootverbose && (ctlr->caps & AHCI_CAP_EMS)) {
|
|
device_printf(dev, "EM Caps:%s%s%s%s%s%s%s%s\n",
|
|
(ctlr->capsem & AHCI_EM_PM) ? " PM":"",
|
|
(ctlr->capsem & AHCI_EM_ALHD) ? " ALHD":"",
|
|
(ctlr->capsem & AHCI_EM_XMT) ? " XMT":"",
|
|
(ctlr->capsem & AHCI_EM_SMB) ? " SMB":"",
|
|
(ctlr->capsem & AHCI_EM_SGPIO) ? " SGPIO":"",
|
|
(ctlr->capsem & AHCI_EM_SES2) ? " SES-2":"",
|
|
(ctlr->capsem & AHCI_EM_SAFTE) ? " SAF-TE":"",
|
|
(ctlr->capsem & AHCI_EM_LED) ? " LED":"");
|
|
}
|
|
/* Attach all channels on this controller */
|
|
for (unit = 0; unit < ctlr->channels; unit++) {
|
|
if ((ctlr->ichannels & (1 << unit)) == 0)
|
|
continue;
|
|
child = device_add_child(dev, "ahcich", -1);
|
|
if (child == NULL)
|
|
device_printf(dev, "failed to add channel device\n");
|
|
else
|
|
device_set_ivars(child, (void *)(intptr_t)unit);
|
|
}
|
|
bus_generic_attach(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ahci_detach(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
device_t *children;
|
|
int nchildren, i;
|
|
|
|
/* Detach & delete all children */
|
|
if (!device_get_children(dev, &children, &nchildren)) {
|
|
for (i = 0; i < nchildren; i++)
|
|
device_delete_child(dev, children[i]);
|
|
free(children, M_TEMP);
|
|
}
|
|
/* Free interrupts. */
|
|
for (i = 0; i < ctlr->numirqs; i++) {
|
|
if (ctlr->irqs[i].r_irq) {
|
|
bus_teardown_intr(dev, ctlr->irqs[i].r_irq,
|
|
ctlr->irqs[i].handle);
|
|
bus_release_resource(dev, SYS_RES_IRQ,
|
|
ctlr->irqs[i].r_irq_rid, ctlr->irqs[i].r_irq);
|
|
}
|
|
}
|
|
pci_release_msi(dev);
|
|
/* Free memory. */
|
|
rman_fini(&ctlr->sc_iomem);
|
|
if (ctlr->r_mem)
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ctlr->r_rid, ctlr->r_mem);
|
|
mtx_destroy(&ctlr->em_mtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ctlr_reset(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
int timeout;
|
|
|
|
if (pci_read_config(dev, 0x00, 4) == 0x28298086 &&
|
|
(pci_read_config(dev, 0x92, 1) & 0xfe) == 0x04)
|
|
pci_write_config(dev, 0x92, 0x01, 1);
|
|
/* Enable AHCI mode */
|
|
ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE);
|
|
/* Reset AHCI controller */
|
|
ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE|AHCI_GHC_HR);
|
|
for (timeout = 1000; timeout > 0; timeout--) {
|
|
DELAY(1000);
|
|
if ((ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_HR) == 0)
|
|
break;
|
|
}
|
|
if (timeout == 0) {
|
|
device_printf(dev, "AHCI controller reset failure\n");
|
|
return ENXIO;
|
|
}
|
|
/* Reenable AHCI mode */
|
|
ATA_OUTL(ctlr->r_mem, AHCI_GHC, AHCI_GHC_AE);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ctlr_setup(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
/* Clear interrupts */
|
|
ATA_OUTL(ctlr->r_mem, AHCI_IS, ATA_INL(ctlr->r_mem, AHCI_IS));
|
|
/* Configure CCC */
|
|
if (ctlr->ccc) {
|
|
ATA_OUTL(ctlr->r_mem, AHCI_CCCP, ATA_INL(ctlr->r_mem, AHCI_PI));
|
|
ATA_OUTL(ctlr->r_mem, AHCI_CCCC,
|
|
(ctlr->ccc << AHCI_CCCC_TV_SHIFT) |
|
|
(4 << AHCI_CCCC_CC_SHIFT) |
|
|
AHCI_CCCC_EN);
|
|
ctlr->cccv = (ATA_INL(ctlr->r_mem, AHCI_CCCC) &
|
|
AHCI_CCCC_INT_MASK) >> AHCI_CCCC_INT_SHIFT;
|
|
if (bootverbose) {
|
|
device_printf(dev,
|
|
"CCC with %dms/4cmd enabled on vector %d\n",
|
|
ctlr->ccc, ctlr->cccv);
|
|
}
|
|
}
|
|
/* Enable AHCI interrupts */
|
|
ATA_OUTL(ctlr->r_mem, AHCI_GHC,
|
|
ATA_INL(ctlr->r_mem, AHCI_GHC) | AHCI_GHC_IE);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_suspend(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
|
|
bus_generic_suspend(dev);
|
|
/* Disable interupts, so the state change(s) doesn't trigger */
|
|
ATA_OUTL(ctlr->r_mem, AHCI_GHC,
|
|
ATA_INL(ctlr->r_mem, AHCI_GHC) & (~AHCI_GHC_IE));
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ahci_resume(device_t dev)
|
|
{
|
|
int res;
|
|
|
|
if ((res = ahci_ctlr_reset(dev)) != 0)
|
|
return (res);
|
|
ahci_ctlr_setup(dev);
|
|
return (bus_generic_resume(dev));
|
|
}
|
|
|
|
static int
|
|
ahci_setup_interrupt(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
int i, msi = 1;
|
|
|
|
/* Process hints. */
|
|
resource_int_value(device_get_name(dev),
|
|
device_get_unit(dev), "msi", &msi);
|
|
if (msi < 0)
|
|
msi = 0;
|
|
else if (msi == 1)
|
|
msi = min(1, pci_msi_count(dev));
|
|
else if (msi > 1)
|
|
msi = pci_msi_count(dev);
|
|
/* Allocate MSI if needed/present. */
|
|
if (msi && pci_alloc_msi(dev, &msi) == 0) {
|
|
ctlr->numirqs = msi;
|
|
} else {
|
|
msi = 0;
|
|
ctlr->numirqs = 1;
|
|
}
|
|
/* Check for single MSI vector fallback. */
|
|
if (ctlr->numirqs > 1 &&
|
|
(ATA_INL(ctlr->r_mem, AHCI_GHC) & AHCI_GHC_MRSM) != 0) {
|
|
device_printf(dev, "Falling back to one MSI\n");
|
|
ctlr->numirqs = 1;
|
|
}
|
|
/* Allocate all IRQs. */
|
|
for (i = 0; i < ctlr->numirqs; i++) {
|
|
ctlr->irqs[i].ctlr = ctlr;
|
|
ctlr->irqs[i].r_irq_rid = i + (msi ? 1 : 0);
|
|
if (ctlr->numirqs == 1 || i >= ctlr->channels ||
|
|
(ctlr->ccc && i == ctlr->cccv))
|
|
ctlr->irqs[i].mode = AHCI_IRQ_MODE_ALL;
|
|
else if (i == ctlr->numirqs - 1)
|
|
ctlr->irqs[i].mode = AHCI_IRQ_MODE_AFTER;
|
|
else
|
|
ctlr->irqs[i].mode = AHCI_IRQ_MODE_ONE;
|
|
if (!(ctlr->irqs[i].r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&ctlr->irqs[i].r_irq_rid, RF_SHAREABLE | RF_ACTIVE))) {
|
|
device_printf(dev, "unable to map interrupt\n");
|
|
return ENXIO;
|
|
}
|
|
if ((bus_setup_intr(dev, ctlr->irqs[i].r_irq, ATA_INTR_FLAGS, NULL,
|
|
(ctlr->irqs[i].mode == AHCI_IRQ_MODE_ONE) ? ahci_intr_one : ahci_intr,
|
|
&ctlr->irqs[i], &ctlr->irqs[i].handle))) {
|
|
/* SOS XXX release r_irq */
|
|
device_printf(dev, "unable to setup interrupt\n");
|
|
return ENXIO;
|
|
}
|
|
if (ctlr->numirqs > 1) {
|
|
bus_describe_intr(dev, ctlr->irqs[i].r_irq,
|
|
ctlr->irqs[i].handle,
|
|
ctlr->irqs[i].mode == AHCI_IRQ_MODE_ONE ?
|
|
"ch%d" : "%d", i);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Common case interrupt handler.
|
|
*/
|
|
static void
|
|
ahci_intr(void *data)
|
|
{
|
|
struct ahci_controller_irq *irq = data;
|
|
struct ahci_controller *ctlr = irq->ctlr;
|
|
u_int32_t is, ise = 0;
|
|
void *arg;
|
|
int unit;
|
|
|
|
if (irq->mode == AHCI_IRQ_MODE_ALL) {
|
|
unit = 0;
|
|
if (ctlr->ccc)
|
|
is = ctlr->ichannels;
|
|
else
|
|
is = ATA_INL(ctlr->r_mem, AHCI_IS);
|
|
} else { /* AHCI_IRQ_MODE_AFTER */
|
|
unit = irq->r_irq_rid - 1;
|
|
is = ATA_INL(ctlr->r_mem, AHCI_IS);
|
|
}
|
|
/* CCC interrupt is edge triggered. */
|
|
if (ctlr->ccc)
|
|
ise = 1 << ctlr->cccv;
|
|
/* Some controllers have edge triggered IS. */
|
|
if (ctlr->quirks & AHCI_Q_EDGEIS)
|
|
ise |= is;
|
|
if (ise != 0)
|
|
ATA_OUTL(ctlr->r_mem, AHCI_IS, ise);
|
|
for (; unit < ctlr->channels; unit++) {
|
|
if ((is & (1 << unit)) != 0 &&
|
|
(arg = ctlr->interrupt[unit].argument)) {
|
|
ctlr->interrupt[unit].function(arg);
|
|
}
|
|
}
|
|
/* AHCI declares level triggered IS. */
|
|
if (!(ctlr->quirks & AHCI_Q_EDGEIS))
|
|
ATA_OUTL(ctlr->r_mem, AHCI_IS, is);
|
|
}
|
|
|
|
/*
|
|
* Simplified interrupt handler for multivector MSI mode.
|
|
*/
|
|
static void
|
|
ahci_intr_one(void *data)
|
|
{
|
|
struct ahci_controller_irq *irq = data;
|
|
struct ahci_controller *ctlr = irq->ctlr;
|
|
void *arg;
|
|
int unit;
|
|
|
|
unit = irq->r_irq_rid - 1;
|
|
/* Some controllers have edge triggered IS. */
|
|
if (ctlr->quirks & AHCI_Q_EDGEIS)
|
|
ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit);
|
|
if ((arg = ctlr->interrupt[unit].argument))
|
|
ctlr->interrupt[unit].function(arg);
|
|
/* AHCI declares level triggered IS. */
|
|
if (!(ctlr->quirks & AHCI_Q_EDGEIS))
|
|
ATA_OUTL(ctlr->r_mem, AHCI_IS, 1 << unit);
|
|
}
|
|
|
|
static struct resource *
|
|
ahci_alloc_resource(device_t dev, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
int unit = ((struct ahci_channel *)device_get_softc(child))->unit;
|
|
struct resource *res = NULL;
|
|
int offset = AHCI_OFFSET + (unit << 7);
|
|
long st;
|
|
|
|
switch (type) {
|
|
case SYS_RES_MEMORY:
|
|
st = rman_get_start(ctlr->r_mem);
|
|
res = rman_reserve_resource(&ctlr->sc_iomem, st + offset,
|
|
st + offset + 127, 128, RF_ACTIVE, child);
|
|
if (res) {
|
|
bus_space_handle_t bsh;
|
|
bus_space_tag_t bst;
|
|
bsh = rman_get_bushandle(ctlr->r_mem);
|
|
bst = rman_get_bustag(ctlr->r_mem);
|
|
bus_space_subregion(bst, bsh, offset, 128, &bsh);
|
|
rman_set_bushandle(res, bsh);
|
|
rman_set_bustag(res, bst);
|
|
}
|
|
break;
|
|
case SYS_RES_IRQ:
|
|
if (*rid == ATA_IRQ_RID)
|
|
res = ctlr->irqs[0].r_irq;
|
|
break;
|
|
}
|
|
return (res);
|
|
}
|
|
|
|
static int
|
|
ahci_release_resource(device_t dev, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
|
|
switch (type) {
|
|
case SYS_RES_MEMORY:
|
|
rman_release_resource(r);
|
|
return (0);
|
|
case SYS_RES_IRQ:
|
|
if (rid != ATA_IRQ_RID)
|
|
return ENOENT;
|
|
return (0);
|
|
}
|
|
return (EINVAL);
|
|
}
|
|
|
|
static int
|
|
ahci_setup_intr(device_t dev, device_t child, struct resource *irq,
|
|
int flags, driver_filter_t *filter, driver_intr_t *function,
|
|
void *argument, void **cookiep)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
int unit = (intptr_t)device_get_ivars(child);
|
|
|
|
if (filter != NULL) {
|
|
printf("ahci.c: we cannot use a filter here\n");
|
|
return (EINVAL);
|
|
}
|
|
ctlr->interrupt[unit].function = function;
|
|
ctlr->interrupt[unit].argument = argument;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_teardown_intr(device_t dev, device_t child, struct resource *irq,
|
|
void *cookie)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(dev);
|
|
int unit = (intptr_t)device_get_ivars(child);
|
|
|
|
ctlr->interrupt[unit].function = NULL;
|
|
ctlr->interrupt[unit].argument = NULL;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_print_child(device_t dev, device_t child)
|
|
{
|
|
int retval;
|
|
|
|
retval = bus_print_child_header(dev, child);
|
|
retval += printf(" at channel %d",
|
|
(int)(intptr_t)device_get_ivars(child));
|
|
retval += bus_print_child_footer(dev, child);
|
|
|
|
return (retval);
|
|
}
|
|
|
|
static int
|
|
ahci_child_location_str(device_t dev, device_t child, char *buf,
|
|
size_t buflen)
|
|
{
|
|
|
|
snprintf(buf, buflen, "channel=%d",
|
|
(int)(intptr_t)device_get_ivars(child));
|
|
return (0);
|
|
}
|
|
|
|
devclass_t ahci_devclass;
|
|
static device_method_t ahci_methods[] = {
|
|
DEVMETHOD(device_probe, ahci_probe),
|
|
DEVMETHOD(device_attach, ahci_attach),
|
|
DEVMETHOD(device_detach, ahci_detach),
|
|
DEVMETHOD(device_suspend, ahci_suspend),
|
|
DEVMETHOD(device_resume, ahci_resume),
|
|
DEVMETHOD(bus_print_child, ahci_print_child),
|
|
DEVMETHOD(bus_alloc_resource, ahci_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, ahci_release_resource),
|
|
DEVMETHOD(bus_setup_intr, ahci_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr,ahci_teardown_intr),
|
|
DEVMETHOD(bus_child_location_str, ahci_child_location_str),
|
|
{ 0, 0 }
|
|
};
|
|
static driver_t ahci_driver = {
|
|
"ahci",
|
|
ahci_methods,
|
|
sizeof(struct ahci_controller)
|
|
};
|
|
DRIVER_MODULE(ahci, pci, ahci_driver, ahci_devclass, 0, 0);
|
|
static device_method_t ahci_ata_methods[] = {
|
|
DEVMETHOD(device_probe, ahci_ata_probe),
|
|
DEVMETHOD(device_attach, ahci_attach),
|
|
DEVMETHOD(device_detach, ahci_detach),
|
|
DEVMETHOD(device_suspend, ahci_suspend),
|
|
DEVMETHOD(device_resume, ahci_resume),
|
|
DEVMETHOD(bus_print_child, ahci_print_child),
|
|
DEVMETHOD(bus_alloc_resource, ahci_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, ahci_release_resource),
|
|
DEVMETHOD(bus_setup_intr, ahci_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr,ahci_teardown_intr),
|
|
DEVMETHOD(bus_child_location_str, ahci_child_location_str),
|
|
{ 0, 0 }
|
|
};
|
|
static driver_t ahci_ata_driver = {
|
|
"ahci",
|
|
ahci_ata_methods,
|
|
sizeof(struct ahci_controller)
|
|
};
|
|
DRIVER_MODULE(ahci, atapci, ahci_ata_driver, ahci_devclass, 0, 0);
|
|
MODULE_VERSION(ahci, 1);
|
|
MODULE_DEPEND(ahci, cam, 1, 1, 1);
|
|
|
|
static int
|
|
ahci_ch_probe(device_t dev)
|
|
{
|
|
|
|
device_set_desc_copy(dev, "AHCI channel");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ch_attach(device_t dev)
|
|
{
|
|
struct ahci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
struct cam_devq *devq;
|
|
int rid, error, i, sata_rev = 0;
|
|
u_int32_t version;
|
|
char buf[32];
|
|
|
|
ch->dev = dev;
|
|
ch->unit = (intptr_t)device_get_ivars(dev);
|
|
ch->caps = ctlr->caps;
|
|
ch->caps2 = ctlr->caps2;
|
|
ch->quirks = ctlr->quirks;
|
|
ch->numslots = ((ch->caps & AHCI_CAP_NCS) >> AHCI_CAP_NCS_SHIFT) + 1;
|
|
mtx_init(&ch->mtx, "AHCI channel lock", NULL, MTX_DEF);
|
|
resource_int_value(device_get_name(dev),
|
|
device_get_unit(dev), "pm_level", &ch->pm_level);
|
|
if (ch->pm_level > 3)
|
|
callout_init_mtx(&ch->pm_timer, &ch->mtx, 0);
|
|
callout_init_mtx(&ch->reset_timer, &ch->mtx, 0);
|
|
/* Limit speed for my onboard JMicron external port.
|
|
* It is not eSATA really. */
|
|
if (pci_get_devid(ctlr->dev) == 0x2363197b &&
|
|
pci_get_subvendor(ctlr->dev) == 0x1043 &&
|
|
pci_get_subdevice(ctlr->dev) == 0x81e4 &&
|
|
ch->unit == 0)
|
|
sata_rev = 1;
|
|
if (ch->quirks & AHCI_Q_SATA2)
|
|
sata_rev = 2;
|
|
resource_int_value(device_get_name(dev),
|
|
device_get_unit(dev), "sata_rev", &sata_rev);
|
|
for (i = 0; i < 16; i++) {
|
|
ch->user[i].revision = sata_rev;
|
|
ch->user[i].mode = 0;
|
|
ch->user[i].bytecount = 8192;
|
|
ch->user[i].tags = ch->numslots;
|
|
ch->user[i].caps = 0;
|
|
ch->curr[i] = ch->user[i];
|
|
if (ch->pm_level) {
|
|
ch->user[i].caps = CTS_SATA_CAPS_H_PMREQ |
|
|
CTS_SATA_CAPS_H_APST |
|
|
CTS_SATA_CAPS_D_PMREQ | CTS_SATA_CAPS_D_APST;
|
|
}
|
|
ch->user[i].caps |= CTS_SATA_CAPS_H_DMAAA |
|
|
CTS_SATA_CAPS_H_AN;
|
|
}
|
|
rid = ch->unit;
|
|
if (!(ch->r_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE)))
|
|
return (ENXIO);
|
|
ahci_dmainit(dev);
|
|
ahci_slotsalloc(dev);
|
|
ahci_ch_init(dev);
|
|
mtx_lock(&ch->mtx);
|
|
rid = ATA_IRQ_RID;
|
|
if (!(ch->r_irq = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&rid, RF_SHAREABLE | RF_ACTIVE))) {
|
|
device_printf(dev, "Unable to map interrupt\n");
|
|
error = ENXIO;
|
|
goto err0;
|
|
}
|
|
if ((bus_setup_intr(dev, ch->r_irq, ATA_INTR_FLAGS, NULL,
|
|
ahci_ch_intr_locked, dev, &ch->ih))) {
|
|
device_printf(dev, "Unable to setup interrupt\n");
|
|
error = ENXIO;
|
|
goto err1;
|
|
}
|
|
ch->chcaps = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
version = ATA_INL(ctlr->r_mem, AHCI_VS);
|
|
if (version < 0x00010020 && (ctlr->caps & AHCI_CAP_FBSS))
|
|
ch->chcaps |= AHCI_P_CMD_FBSCP;
|
|
if (bootverbose) {
|
|
device_printf(dev, "Caps:%s%s%s%s%s\n",
|
|
(ch->chcaps & AHCI_P_CMD_HPCP) ? " HPCP":"",
|
|
(ch->chcaps & AHCI_P_CMD_MPSP) ? " MPSP":"",
|
|
(ch->chcaps & AHCI_P_CMD_CPD) ? " CPD":"",
|
|
(ch->chcaps & AHCI_P_CMD_ESP) ? " ESP":"",
|
|
(ch->chcaps & AHCI_P_CMD_FBSCP) ? " FBSCP":"");
|
|
}
|
|
/* Create the device queue for our SIM. */
|
|
devq = cam_simq_alloc(ch->numslots);
|
|
if (devq == NULL) {
|
|
device_printf(dev, "Unable to allocate simq\n");
|
|
error = ENOMEM;
|
|
goto err1;
|
|
}
|
|
/* Construct SIM entry */
|
|
ch->sim = cam_sim_alloc(ahciaction, ahcipoll, "ahcich", ch,
|
|
device_get_unit(dev), &ch->mtx,
|
|
min(2, ch->numslots),
|
|
(ch->caps & AHCI_CAP_SNCQ) ? ch->numslots : 0,
|
|
devq);
|
|
if (ch->sim == NULL) {
|
|
cam_simq_free(devq);
|
|
device_printf(dev, "unable to allocate sim\n");
|
|
error = ENOMEM;
|
|
goto err1;
|
|
}
|
|
if (xpt_bus_register(ch->sim, dev, 0) != CAM_SUCCESS) {
|
|
device_printf(dev, "unable to register xpt bus\n");
|
|
error = ENXIO;
|
|
goto err2;
|
|
}
|
|
if (xpt_create_path(&ch->path, /*periph*/NULL, cam_sim_path(ch->sim),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
device_printf(dev, "unable to create path\n");
|
|
error = ENXIO;
|
|
goto err3;
|
|
}
|
|
if (ch->pm_level > 3) {
|
|
callout_reset(&ch->pm_timer,
|
|
(ch->pm_level == 4) ? hz / 1000 : hz / 8,
|
|
ahci_ch_pm, dev);
|
|
}
|
|
mtx_unlock(&ch->mtx);
|
|
if ((ch->caps & AHCI_CAP_EMS) &&
|
|
(ctlr->capsem & AHCI_EM_LED)) {
|
|
for (i = 0; i < AHCI_NUM_LEDS; i++) {
|
|
ch->leds[i].dev = dev;
|
|
ch->leds[i].num = i;
|
|
}
|
|
if ((ctlr->capsem & AHCI_EM_ALHD) == 0) {
|
|
snprintf(buf, sizeof(buf), "%s.act",
|
|
device_get_nameunit(dev));
|
|
ch->leds[0].led = led_create(ahci_ch_led,
|
|
&ch->leds[0], buf);
|
|
}
|
|
snprintf(buf, sizeof(buf), "%s.locate",
|
|
device_get_nameunit(dev));
|
|
ch->leds[1].led = led_create(ahci_ch_led, &ch->leds[1], buf);
|
|
snprintf(buf, sizeof(buf), "%s.fault",
|
|
device_get_nameunit(dev));
|
|
ch->leds[2].led = led_create(ahci_ch_led, &ch->leds[2], buf);
|
|
}
|
|
return (0);
|
|
|
|
err3:
|
|
xpt_bus_deregister(cam_sim_path(ch->sim));
|
|
err2:
|
|
cam_sim_free(ch->sim, /*free_devq*/TRUE);
|
|
err1:
|
|
bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
|
|
err0:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
|
|
mtx_unlock(&ch->mtx);
|
|
mtx_destroy(&ch->mtx);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ahci_ch_detach(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int i;
|
|
|
|
for (i = 0; i < AHCI_NUM_LEDS; i++) {
|
|
if (ch->leds[i].led)
|
|
led_destroy(ch->leds[i].led);
|
|
}
|
|
mtx_lock(&ch->mtx);
|
|
xpt_async(AC_LOST_DEVICE, ch->path, NULL);
|
|
/* Forget about reset. */
|
|
if (ch->resetting) {
|
|
ch->resetting = 0;
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
xpt_free_path(ch->path);
|
|
xpt_bus_deregister(cam_sim_path(ch->sim));
|
|
cam_sim_free(ch->sim, /*free_devq*/TRUE);
|
|
mtx_unlock(&ch->mtx);
|
|
|
|
if (ch->pm_level > 3)
|
|
callout_drain(&ch->pm_timer);
|
|
callout_drain(&ch->reset_timer);
|
|
bus_teardown_intr(dev, ch->r_irq, ch->ih);
|
|
bus_release_resource(dev, SYS_RES_IRQ, ATA_IRQ_RID, ch->r_irq);
|
|
|
|
ahci_ch_deinit(dev);
|
|
ahci_slotsfree(dev);
|
|
ahci_dmafini(dev);
|
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY, ch->unit, ch->r_mem);
|
|
mtx_destroy(&ch->mtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ch_init(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
uint64_t work;
|
|
|
|
/* Disable port interrupts */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IE, 0);
|
|
/* Setup work areas */
|
|
work = ch->dma.work_bus + AHCI_CL_OFFSET;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CLB, work & 0xffffffff);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CLBU, work >> 32);
|
|
work = ch->dma.rfis_bus;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_FB, work & 0xffffffff);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_FBU, work >> 32);
|
|
/* Activate the channel and power/spin up device */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD,
|
|
(AHCI_P_CMD_ACTIVE | AHCI_P_CMD_POD | AHCI_P_CMD_SUD |
|
|
((ch->pm_level == 2 || ch->pm_level == 3) ? AHCI_P_CMD_ALPE : 0) |
|
|
((ch->pm_level > 2) ? AHCI_P_CMD_ASP : 0 )));
|
|
ahci_start_fr(dev);
|
|
ahci_start(dev, 1);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ch_deinit(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
/* Disable port interrupts. */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IE, 0);
|
|
/* Reset command register. */
|
|
ahci_stop(dev);
|
|
ahci_stop_fr(dev);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, 0);
|
|
/* Allow everything, including partial and slumber modes. */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SCTL, 0);
|
|
/* Request slumber mode transition and give some time to get there. */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, AHCI_P_CMD_SLUMBER);
|
|
DELAY(100);
|
|
/* Disable PHY. */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ch_suspend(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
mtx_lock(&ch->mtx);
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
/* Forget about reset. */
|
|
if (ch->resetting) {
|
|
ch->resetting = 0;
|
|
callout_stop(&ch->reset_timer);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
while (ch->oslots)
|
|
msleep(ch, &ch->mtx, PRIBIO, "ahcisusp", hz/100);
|
|
ahci_ch_deinit(dev);
|
|
mtx_unlock(&ch->mtx);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ahci_ch_resume(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
mtx_lock(&ch->mtx);
|
|
ahci_ch_init(dev);
|
|
ahci_reset(dev);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
mtx_unlock(&ch->mtx);
|
|
return (0);
|
|
}
|
|
|
|
devclass_t ahcich_devclass;
|
|
static device_method_t ahcich_methods[] = {
|
|
DEVMETHOD(device_probe, ahci_ch_probe),
|
|
DEVMETHOD(device_attach, ahci_ch_attach),
|
|
DEVMETHOD(device_detach, ahci_ch_detach),
|
|
DEVMETHOD(device_suspend, ahci_ch_suspend),
|
|
DEVMETHOD(device_resume, ahci_ch_resume),
|
|
{ 0, 0 }
|
|
};
|
|
static driver_t ahcich_driver = {
|
|
"ahcich",
|
|
ahcich_methods,
|
|
sizeof(struct ahci_channel)
|
|
};
|
|
DRIVER_MODULE(ahcich, ahci, ahcich_driver, ahcich_devclass, 0, 0);
|
|
|
|
static void
|
|
ahci_ch_setleds(device_t dev)
|
|
{
|
|
struct ahci_channel *ch;
|
|
struct ahci_controller *ctlr;
|
|
size_t buf;
|
|
int i, timeout;
|
|
int16_t val;
|
|
|
|
ctlr = device_get_softc(device_get_parent(dev));
|
|
ch = device_get_softc(dev);
|
|
|
|
val = 0;
|
|
for (i = 0; i < AHCI_NUM_LEDS; i++)
|
|
val |= ch->leds[i].state << (i * 3);
|
|
|
|
buf = (ctlr->emloc & 0xffff0000) >> 14;
|
|
mtx_lock(&ctlr->em_mtx);
|
|
timeout = 1000;
|
|
while (ATA_INL(ctlr->r_mem, AHCI_EM_CTL) & (AHCI_EM_TM | AHCI_EM_RST) &&
|
|
--timeout > 0)
|
|
DELAY(1000);
|
|
if (timeout == 0)
|
|
device_printf(dev, "EM timeout\n");
|
|
ATA_OUTL(ctlr->r_mem, buf, (1 << 8) | (0 << 16) | (0 << 24));
|
|
ATA_OUTL(ctlr->r_mem, buf + 4, ch->unit | (val << 16));
|
|
ATA_OUTL(ctlr->r_mem, AHCI_EM_CTL, AHCI_EM_TM);
|
|
mtx_unlock(&ctlr->em_mtx);
|
|
}
|
|
|
|
static void
|
|
ahci_ch_led(void *priv, int onoff)
|
|
{
|
|
struct ahci_led *led;
|
|
|
|
led = (struct ahci_led *)priv;
|
|
|
|
led->state = onoff;
|
|
ahci_ch_setleds(led->dev);
|
|
}
|
|
|
|
struct ahci_dc_cb_args {
|
|
bus_addr_t maddr;
|
|
int error;
|
|
};
|
|
|
|
static void
|
|
ahci_dmainit(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
struct ahci_dc_cb_args dcba;
|
|
size_t rfsize;
|
|
|
|
if (ch->caps & AHCI_CAP_64BIT)
|
|
ch->dma.max_address = BUS_SPACE_MAXADDR;
|
|
else
|
|
ch->dma.max_address = BUS_SPACE_MAXADDR_32BIT;
|
|
/* Command area. */
|
|
if (bus_dma_tag_create(bus_get_dma_tag(dev), 1024, 0,
|
|
ch->dma.max_address, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, AHCI_WORK_SIZE, 1, AHCI_WORK_SIZE,
|
|
0, NULL, NULL, &ch->dma.work_tag))
|
|
goto error;
|
|
if (bus_dmamem_alloc(ch->dma.work_tag, (void **)&ch->dma.work, 0,
|
|
&ch->dma.work_map))
|
|
goto error;
|
|
if (bus_dmamap_load(ch->dma.work_tag, ch->dma.work_map, ch->dma.work,
|
|
AHCI_WORK_SIZE, ahci_dmasetupc_cb, &dcba, 0) || dcba.error) {
|
|
bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
|
|
goto error;
|
|
}
|
|
ch->dma.work_bus = dcba.maddr;
|
|
/* FIS receive area. */
|
|
if (ch->chcaps & AHCI_P_CMD_FBSCP)
|
|
rfsize = 4096;
|
|
else
|
|
rfsize = 256;
|
|
if (bus_dma_tag_create(bus_get_dma_tag(dev), rfsize, 0,
|
|
ch->dma.max_address, BUS_SPACE_MAXADDR,
|
|
NULL, NULL, rfsize, 1, rfsize,
|
|
0, NULL, NULL, &ch->dma.rfis_tag))
|
|
goto error;
|
|
if (bus_dmamem_alloc(ch->dma.rfis_tag, (void **)&ch->dma.rfis, 0,
|
|
&ch->dma.rfis_map))
|
|
goto error;
|
|
if (bus_dmamap_load(ch->dma.rfis_tag, ch->dma.rfis_map, ch->dma.rfis,
|
|
rfsize, ahci_dmasetupc_cb, &dcba, 0) || dcba.error) {
|
|
bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map);
|
|
goto error;
|
|
}
|
|
ch->dma.rfis_bus = dcba.maddr;
|
|
/* Data area. */
|
|
if (bus_dma_tag_create(bus_get_dma_tag(dev), 2, 0,
|
|
ch->dma.max_address, BUS_SPACE_MAXADDR,
|
|
NULL, NULL,
|
|
AHCI_SG_ENTRIES * PAGE_SIZE * ch->numslots,
|
|
AHCI_SG_ENTRIES, AHCI_PRD_MAX,
|
|
0, busdma_lock_mutex, &ch->mtx, &ch->dma.data_tag)) {
|
|
goto error;
|
|
}
|
|
return;
|
|
|
|
error:
|
|
device_printf(dev, "WARNING - DMA initialization failed\n");
|
|
ahci_dmafini(dev);
|
|
}
|
|
|
|
static void
|
|
ahci_dmasetupc_cb(void *xsc, bus_dma_segment_t *segs, int nsegs, int error)
|
|
{
|
|
struct ahci_dc_cb_args *dcba = (struct ahci_dc_cb_args *)xsc;
|
|
|
|
if (!(dcba->error = error))
|
|
dcba->maddr = segs[0].ds_addr;
|
|
}
|
|
|
|
static void
|
|
ahci_dmafini(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
if (ch->dma.data_tag) {
|
|
bus_dma_tag_destroy(ch->dma.data_tag);
|
|
ch->dma.data_tag = NULL;
|
|
}
|
|
if (ch->dma.rfis_bus) {
|
|
bus_dmamap_unload(ch->dma.rfis_tag, ch->dma.rfis_map);
|
|
bus_dmamem_free(ch->dma.rfis_tag, ch->dma.rfis, ch->dma.rfis_map);
|
|
ch->dma.rfis_bus = 0;
|
|
ch->dma.rfis_map = NULL;
|
|
ch->dma.rfis = NULL;
|
|
}
|
|
if (ch->dma.work_bus) {
|
|
bus_dmamap_unload(ch->dma.work_tag, ch->dma.work_map);
|
|
bus_dmamem_free(ch->dma.work_tag, ch->dma.work, ch->dma.work_map);
|
|
ch->dma.work_bus = 0;
|
|
ch->dma.work_map = NULL;
|
|
ch->dma.work = NULL;
|
|
}
|
|
if (ch->dma.work_tag) {
|
|
bus_dma_tag_destroy(ch->dma.work_tag);
|
|
ch->dma.work_tag = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahci_slotsalloc(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int i;
|
|
|
|
/* Alloc and setup command/dma slots */
|
|
bzero(ch->slot, sizeof(ch->slot));
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
struct ahci_slot *slot = &ch->slot[i];
|
|
|
|
slot->dev = dev;
|
|
slot->slot = i;
|
|
slot->state = AHCI_SLOT_EMPTY;
|
|
slot->ccb = NULL;
|
|
callout_init_mtx(&slot->timeout, &ch->mtx, 0);
|
|
|
|
if (bus_dmamap_create(ch->dma.data_tag, 0, &slot->dma.data_map))
|
|
device_printf(ch->dev, "FAILURE - create data_map\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahci_slotsfree(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int i;
|
|
|
|
/* Free all dma slots */
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
struct ahci_slot *slot = &ch->slot[i];
|
|
|
|
callout_drain(&slot->timeout);
|
|
if (slot->dma.data_map) {
|
|
bus_dmamap_destroy(ch->dma.data_tag, slot->dma.data_map);
|
|
slot->dma.data_map = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
ahci_phy_check_events(device_t dev, u_int32_t serr)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
if (((ch->pm_level == 0) && (serr & ATA_SE_PHY_CHANGED)) ||
|
|
((ch->pm_level != 0 || ch->listening) && (serr & ATA_SE_EXCHANGED))) {
|
|
u_int32_t status = ATA_INL(ch->r_mem, AHCI_P_SSTS);
|
|
union ccb *ccb;
|
|
|
|
if (bootverbose) {
|
|
if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE)
|
|
device_printf(dev, "CONNECT requested\n");
|
|
else
|
|
device_printf(dev, "DISCONNECT requested\n");
|
|
}
|
|
ahci_reset(dev);
|
|
if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
|
|
return (0);
|
|
if (xpt_create_path(&ccb->ccb_h.path, NULL,
|
|
cam_sim_path(ch->sim),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_free_ccb(ccb);
|
|
return (0);
|
|
}
|
|
xpt_rescan(ccb);
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ahci_cpd_check_events(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int32_t status;
|
|
union ccb *ccb;
|
|
|
|
if (ch->pm_level == 0)
|
|
return;
|
|
|
|
status = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
if ((status & AHCI_P_CMD_CPD) == 0)
|
|
return;
|
|
|
|
if (bootverbose) {
|
|
if (status & AHCI_P_CMD_CPS) {
|
|
device_printf(dev, "COLD CONNECT requested\n");
|
|
} else
|
|
device_printf(dev, "COLD DISCONNECT requested\n");
|
|
}
|
|
ahci_reset(dev);
|
|
if ((ccb = xpt_alloc_ccb_nowait()) == NULL)
|
|
return;
|
|
if (xpt_create_path(&ccb->ccb_h.path, NULL, cam_sim_path(ch->sim),
|
|
CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_free_ccb(ccb);
|
|
return;
|
|
}
|
|
xpt_rescan(ccb);
|
|
}
|
|
|
|
static void
|
|
ahci_notify_events(device_t dev, u_int32_t status)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
struct cam_path *dpath;
|
|
int i;
|
|
|
|
if (ch->caps & AHCI_CAP_SSNTF)
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SNTF, status);
|
|
if (bootverbose)
|
|
device_printf(dev, "SNTF 0x%04x\n", status);
|
|
for (i = 0; i < 16; i++) {
|
|
if ((status & (1 << i)) == 0)
|
|
continue;
|
|
if (xpt_create_path(&dpath, NULL,
|
|
xpt_path_path_id(ch->path), i, 0) == CAM_REQ_CMP) {
|
|
xpt_async(AC_SCSI_AEN, dpath, NULL);
|
|
xpt_free_path(dpath);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahci_ch_intr_locked(void *data)
|
|
{
|
|
device_t dev = (device_t)data;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
mtx_lock(&ch->mtx);
|
|
ahci_ch_intr(data);
|
|
mtx_unlock(&ch->mtx);
|
|
}
|
|
|
|
static void
|
|
ahci_ch_pm(void *arg)
|
|
{
|
|
device_t dev = (device_t)arg;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
uint32_t work;
|
|
|
|
if (ch->numrslots != 0)
|
|
return;
|
|
work = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
if (ch->pm_level == 4)
|
|
work |= AHCI_P_CMD_PARTIAL;
|
|
else
|
|
work |= AHCI_P_CMD_SLUMBER;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, work);
|
|
}
|
|
|
|
static void
|
|
ahci_ch_intr(void *data)
|
|
{
|
|
device_t dev = (device_t)data;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
uint32_t istatus, sstatus, cstatus, serr = 0, sntf = 0, ok, err;
|
|
enum ahci_err_type et;
|
|
int i, ccs, port, reset = 0;
|
|
|
|
/* Read and clear interrupt statuses. */
|
|
istatus = ATA_INL(ch->r_mem, AHCI_P_IS);
|
|
if (istatus == 0)
|
|
return;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IS, istatus);
|
|
/* Read command statuses. */
|
|
sstatus = ATA_INL(ch->r_mem, AHCI_P_SACT);
|
|
cstatus = ATA_INL(ch->r_mem, AHCI_P_CI);
|
|
if (istatus & AHCI_P_IX_SDB) {
|
|
if (ch->caps & AHCI_CAP_SSNTF)
|
|
sntf = ATA_INL(ch->r_mem, AHCI_P_SNTF);
|
|
else if (ch->fbs_enabled) {
|
|
u_int8_t *fis = ch->dma.rfis + 0x58;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
if (fis[1] & 0x80) {
|
|
fis[1] &= 0x7f;
|
|
sntf |= 1 << i;
|
|
}
|
|
fis += 256;
|
|
}
|
|
} else {
|
|
u_int8_t *fis = ch->dma.rfis + 0x58;
|
|
|
|
if (fis[1] & 0x80)
|
|
sntf = (1 << (fis[1] & 0x0f));
|
|
}
|
|
}
|
|
/* Process PHY events */
|
|
if (istatus & (AHCI_P_IX_PC | AHCI_P_IX_PRC | AHCI_P_IX_OF |
|
|
AHCI_P_IX_IF | AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) {
|
|
serr = ATA_INL(ch->r_mem, AHCI_P_SERR);
|
|
if (serr) {
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SERR, serr);
|
|
reset = ahci_phy_check_events(dev, serr);
|
|
}
|
|
}
|
|
/* Process cold presence detection events */
|
|
if ((istatus & AHCI_P_IX_CPD) && !reset)
|
|
ahci_cpd_check_events(dev);
|
|
/* Process command errors */
|
|
if (istatus & (AHCI_P_IX_OF | AHCI_P_IX_IF |
|
|
AHCI_P_IX_HBD | AHCI_P_IX_HBF | AHCI_P_IX_TFE)) {
|
|
ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CCS_MASK)
|
|
>> AHCI_P_CMD_CCS_SHIFT;
|
|
//device_printf(dev, "%s ERROR is %08x cs %08x ss %08x rs %08x tfd %02x serr %08x fbs %08x ccs %d\n",
|
|
// __func__, istatus, cstatus, sstatus, ch->rslots, ATA_INL(ch->r_mem, AHCI_P_TFD),
|
|
// serr, ATA_INL(ch->r_mem, AHCI_P_FBS), ccs);
|
|
port = -1;
|
|
if (ch->fbs_enabled) {
|
|
uint32_t fbs = ATA_INL(ch->r_mem, AHCI_P_FBS);
|
|
if (fbs & AHCI_P_FBS_SDE) {
|
|
port = (fbs & AHCI_P_FBS_DWE)
|
|
>> AHCI_P_FBS_DWE_SHIFT;
|
|
} else {
|
|
for (i = 0; i < 16; i++) {
|
|
if (ch->numrslotspd[i] == 0)
|
|
continue;
|
|
if (port == -1)
|
|
port = i;
|
|
else if (port != i) {
|
|
port = -2;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
err = ch->rslots & (cstatus | sstatus);
|
|
} else {
|
|
ccs = 0;
|
|
err = 0;
|
|
port = -1;
|
|
}
|
|
/* Complete all successfull commands. */
|
|
ok = ch->rslots & ~(cstatus | sstatus);
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
if ((ok >> i) & 1)
|
|
ahci_end_transaction(&ch->slot[i], AHCI_ERR_NONE);
|
|
}
|
|
/* On error, complete the rest of commands with error statuses. */
|
|
if (err) {
|
|
if (ch->frozen) {
|
|
union ccb *fccb = ch->frozen;
|
|
ch->frozen = NULL;
|
|
fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
|
|
if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
|
|
xpt_freeze_devq(fccb->ccb_h.path, 1);
|
|
fccb->ccb_h.status |= CAM_DEV_QFRZN;
|
|
}
|
|
xpt_done(fccb);
|
|
}
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
/* XXX: reqests in loading state. */
|
|
if (((err >> i) & 1) == 0)
|
|
continue;
|
|
if (port >= 0 &&
|
|
ch->slot[i].ccb->ccb_h.target_id != port)
|
|
continue;
|
|
if (istatus & AHCI_P_IX_TFE) {
|
|
if (port != -2) {
|
|
/* Task File Error */
|
|
if (ch->numtslotspd[
|
|
ch->slot[i].ccb->ccb_h.target_id] == 0) {
|
|
/* Untagged operation. */
|
|
if (i == ccs)
|
|
et = AHCI_ERR_TFE;
|
|
else
|
|
et = AHCI_ERR_INNOCENT;
|
|
} else {
|
|
/* Tagged operation. */
|
|
et = AHCI_ERR_NCQ;
|
|
}
|
|
} else {
|
|
et = AHCI_ERR_TFE;
|
|
ch->fatalerr = 1;
|
|
}
|
|
} else if (istatus & AHCI_P_IX_IF) {
|
|
if (ch->numtslots == 0 && i != ccs && port != -2)
|
|
et = AHCI_ERR_INNOCENT;
|
|
else
|
|
et = AHCI_ERR_SATA;
|
|
} else
|
|
et = AHCI_ERR_INVALID;
|
|
ahci_end_transaction(&ch->slot[i], et);
|
|
}
|
|
/*
|
|
* We can't reinit port if there are some other
|
|
* commands active, use resume to complete them.
|
|
*/
|
|
if (ch->rslots != 0 && !ch->recoverycmd)
|
|
ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN | AHCI_P_FBS_DEC);
|
|
}
|
|
/* Process NOTIFY events */
|
|
if (sntf)
|
|
ahci_notify_events(dev, sntf);
|
|
}
|
|
|
|
/* Must be called with channel locked. */
|
|
static int
|
|
ahci_check_collision(device_t dev, union ccb *ccb)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int t = ccb->ccb_h.target_id;
|
|
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
|
|
/* Tagged command while we have no supported tag free. */
|
|
if (((~ch->oslots) & (0xffffffff >> (32 -
|
|
ch->curr[t].tags))) == 0)
|
|
return (1);
|
|
/* If we have FBS */
|
|
if (ch->fbs_enabled) {
|
|
/* Tagged command while untagged are active. */
|
|
if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] == 0)
|
|
return (1);
|
|
} else {
|
|
/* Tagged command while untagged are active. */
|
|
if (ch->numrslots != 0 && ch->numtslots == 0)
|
|
return (1);
|
|
/* Tagged command while tagged to other target is active. */
|
|
if (ch->numtslots != 0 &&
|
|
ch->taggedtarget != ccb->ccb_h.target_id)
|
|
return (1);
|
|
}
|
|
} else {
|
|
/* If we have FBS */
|
|
if (ch->fbs_enabled) {
|
|
/* Untagged command while tagged are active. */
|
|
if (ch->numrslotspd[t] != 0 && ch->numtslotspd[t] != 0)
|
|
return (1);
|
|
} else {
|
|
/* Untagged command while tagged are active. */
|
|
if (ch->numrslots != 0 && ch->numtslots != 0)
|
|
return (1);
|
|
}
|
|
}
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT))) {
|
|
/* Atomic command while anything active. */
|
|
if (ch->numrslots != 0)
|
|
return (1);
|
|
}
|
|
/* We have some atomic command running. */
|
|
if (ch->aslots != 0)
|
|
return (1);
|
|
return (0);
|
|
}
|
|
|
|
/* Must be called with channel locked. */
|
|
static void
|
|
ahci_begin_transaction(device_t dev, union ccb *ccb)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
struct ahci_slot *slot;
|
|
int tag, tags;
|
|
|
|
/* Choose empty slot. */
|
|
tags = ch->numslots;
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA))
|
|
tags = ch->curr[ccb->ccb_h.target_id].tags;
|
|
tag = ch->lastslot;
|
|
while (1) {
|
|
if (tag >= tags)
|
|
tag = 0;
|
|
if (ch->slot[tag].state == AHCI_SLOT_EMPTY)
|
|
break;
|
|
tag++;
|
|
};
|
|
ch->lastslot = tag;
|
|
/* Occupy chosen slot. */
|
|
slot = &ch->slot[tag];
|
|
slot->ccb = ccb;
|
|
/* Stop PM timer. */
|
|
if (ch->numrslots == 0 && ch->pm_level > 3)
|
|
callout_stop(&ch->pm_timer);
|
|
/* Update channel stats. */
|
|
ch->oslots |= (1 << slot->slot);
|
|
ch->numrslots++;
|
|
ch->numrslotspd[ccb->ccb_h.target_id]++;
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
|
|
ch->numtslots++;
|
|
ch->numtslotspd[ccb->ccb_h.target_id]++;
|
|
ch->taggedtarget = ccb->ccb_h.target_id;
|
|
}
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & (CAM_ATAIO_CONTROL | CAM_ATAIO_NEEDRESULT)))
|
|
ch->aslots |= (1 << slot->slot);
|
|
slot->dma.nsegs = 0;
|
|
/* If request moves data, setup and load SG list */
|
|
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
|
|
void *buf;
|
|
bus_size_t size;
|
|
|
|
slot->state = AHCI_SLOT_LOADING;
|
|
if (ccb->ccb_h.func_code == XPT_ATA_IO) {
|
|
buf = ccb->ataio.data_ptr;
|
|
size = ccb->ataio.dxfer_len;
|
|
} else {
|
|
buf = ccb->csio.data_ptr;
|
|
size = ccb->csio.dxfer_len;
|
|
}
|
|
bus_dmamap_load(ch->dma.data_tag, slot->dma.data_map,
|
|
buf, size, ahci_dmasetprd, slot, 0);
|
|
} else
|
|
ahci_execute_transaction(slot);
|
|
}
|
|
|
|
/* Locked by busdma engine. */
|
|
static void
|
|
ahci_dmasetprd(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
|
|
{
|
|
struct ahci_slot *slot = arg;
|
|
struct ahci_channel *ch = device_get_softc(slot->dev);
|
|
struct ahci_cmd_tab *ctp;
|
|
struct ahci_dma_prd *prd;
|
|
int i;
|
|
|
|
if (error) {
|
|
device_printf(slot->dev, "DMA load error\n");
|
|
ahci_end_transaction(slot, AHCI_ERR_INVALID);
|
|
return;
|
|
}
|
|
KASSERT(nsegs <= AHCI_SG_ENTRIES, ("too many DMA segment entries\n"));
|
|
/* Get a piece of the workspace for this request */
|
|
ctp = (struct ahci_cmd_tab *)
|
|
(ch->dma.work + AHCI_CT_OFFSET + (AHCI_CT_SIZE * slot->slot));
|
|
/* Fill S/G table */
|
|
prd = &ctp->prd_tab[0];
|
|
for (i = 0; i < nsegs; i++) {
|
|
prd[i].dba = htole64(segs[i].ds_addr);
|
|
prd[i].dbc = htole32((segs[i].ds_len - 1) & AHCI_PRD_MASK);
|
|
}
|
|
slot->dma.nsegs = nsegs;
|
|
bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
|
|
((slot->ccb->ccb_h.flags & CAM_DIR_IN) ?
|
|
BUS_DMASYNC_PREREAD : BUS_DMASYNC_PREWRITE));
|
|
ahci_execute_transaction(slot);
|
|
}
|
|
|
|
/* Must be called with channel locked. */
|
|
static void
|
|
ahci_execute_transaction(struct ahci_slot *slot)
|
|
{
|
|
device_t dev = slot->dev;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
struct ahci_cmd_tab *ctp;
|
|
struct ahci_cmd_list *clp;
|
|
union ccb *ccb = slot->ccb;
|
|
int port = ccb->ccb_h.target_id & 0x0f;
|
|
int fis_size, i, softreset;
|
|
uint8_t *fis = ch->dma.rfis + 0x40;
|
|
uint8_t val;
|
|
|
|
/* Get a piece of the workspace for this request */
|
|
ctp = (struct ahci_cmd_tab *)
|
|
(ch->dma.work + AHCI_CT_OFFSET + (AHCI_CT_SIZE * slot->slot));
|
|
/* Setup the FIS for this request */
|
|
if (!(fis_size = ahci_setup_fis(dev, ctp, ccb, slot->slot))) {
|
|
device_printf(ch->dev, "Setting up SATA FIS failed\n");
|
|
ahci_end_transaction(slot, AHCI_ERR_INVALID);
|
|
return;
|
|
}
|
|
/* Setup the command list entry */
|
|
clp = (struct ahci_cmd_list *)
|
|
(ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot));
|
|
clp->cmd_flags = htole16(
|
|
(ccb->ccb_h.flags & CAM_DIR_OUT ? AHCI_CMD_WRITE : 0) |
|
|
(ccb->ccb_h.func_code == XPT_SCSI_IO ?
|
|
(AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH) : 0) |
|
|
(fis_size / sizeof(u_int32_t)) |
|
|
(port << 12));
|
|
clp->prd_length = htole16(slot->dma.nsegs);
|
|
/* Special handling for Soft Reset command. */
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL)) {
|
|
if (ccb->ataio.cmd.control & ATA_A_RESET) {
|
|
softreset = 1;
|
|
/* Kick controller into sane state */
|
|
ahci_stop(dev);
|
|
ahci_clo(dev);
|
|
ahci_start(dev, 0);
|
|
clp->cmd_flags |= AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY;
|
|
} else {
|
|
softreset = 2;
|
|
/* Prepare FIS receive area for check. */
|
|
for (i = 0; i < 20; i++)
|
|
fis[i] = 0xff;
|
|
}
|
|
} else
|
|
softreset = 0;
|
|
clp->bytecount = 0;
|
|
clp->cmd_table_phys = htole64(ch->dma.work_bus + AHCI_CT_OFFSET +
|
|
(AHCI_CT_SIZE * slot->slot));
|
|
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map,
|
|
BUS_DMASYNC_PREREAD);
|
|
/* Set ACTIVE bit for NCQ commands. */
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SACT, 1 << slot->slot);
|
|
}
|
|
/* If FBS is enabled, set PMP port. */
|
|
if (ch->fbs_enabled) {
|
|
ATA_OUTL(ch->r_mem, AHCI_P_FBS, AHCI_P_FBS_EN |
|
|
(port << AHCI_P_FBS_DEV_SHIFT));
|
|
}
|
|
/* Issue command to the controller. */
|
|
slot->state = AHCI_SLOT_RUNNING;
|
|
ch->rslots |= (1 << slot->slot);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CI, (1 << slot->slot));
|
|
/* Device reset commands doesn't interrupt. Poll them. */
|
|
if (ccb->ccb_h.func_code == XPT_ATA_IO &&
|
|
(ccb->ataio.cmd.command == ATA_DEVICE_RESET || softreset)) {
|
|
int count, timeout = ccb->ccb_h.timeout * 100;
|
|
enum ahci_err_type et = AHCI_ERR_NONE;
|
|
|
|
for (count = 0; count < timeout; count++) {
|
|
DELAY(10);
|
|
if (!(ATA_INL(ch->r_mem, AHCI_P_CI) & (1 << slot->slot)))
|
|
break;
|
|
if ((ATA_INL(ch->r_mem, AHCI_P_TFD) & ATA_S_ERROR) &&
|
|
softreset != 1) {
|
|
#if 0
|
|
device_printf(ch->dev,
|
|
"Poll error on slot %d, TFD: %04x\n",
|
|
slot->slot, ATA_INL(ch->r_mem, AHCI_P_TFD));
|
|
#endif
|
|
et = AHCI_ERR_TFE;
|
|
break;
|
|
}
|
|
/* Workaround for ATI SB600/SB700 chipsets. */
|
|
if (ccb->ccb_h.target_id == 15 &&
|
|
pci_get_vendor(device_get_parent(dev)) == 0x1002 &&
|
|
(ATA_INL(ch->r_mem, AHCI_P_IS) & AHCI_P_IX_IPM)) {
|
|
et = AHCI_ERR_TIMEOUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Marvell controllers do not wait for readyness. */
|
|
if ((ch->quirks & AHCI_Q_NOBSYRES) && softreset == 2 &&
|
|
et == AHCI_ERR_NONE) {
|
|
while ((val = fis[2]) & ATA_S_BUSY) {
|
|
DELAY(10);
|
|
if (count++ >= timeout)
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (timeout && (count >= timeout)) {
|
|
device_printf(dev, "Poll timeout on slot %d port %d\n",
|
|
slot->slot, port);
|
|
device_printf(dev, "is %08x cs %08x ss %08x "
|
|
"rs %08x tfd %02x serr %08x\n",
|
|
ATA_INL(ch->r_mem, AHCI_P_IS),
|
|
ATA_INL(ch->r_mem, AHCI_P_CI),
|
|
ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots,
|
|
ATA_INL(ch->r_mem, AHCI_P_TFD),
|
|
ATA_INL(ch->r_mem, AHCI_P_SERR));
|
|
et = AHCI_ERR_TIMEOUT;
|
|
}
|
|
|
|
/* Kick controller into sane state and enable FBS. */
|
|
if (softreset == 2)
|
|
ch->eslots |= (1 << slot->slot);
|
|
ahci_end_transaction(slot, et);
|
|
return;
|
|
}
|
|
/* Start command execution timeout */
|
|
callout_reset(&slot->timeout, (int)ccb->ccb_h.timeout * hz / 2000,
|
|
(timeout_t*)ahci_timeout, slot);
|
|
return;
|
|
}
|
|
|
|
/* Must be called with channel locked. */
|
|
static void
|
|
ahci_process_timeout(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int i;
|
|
|
|
mtx_assert(&ch->mtx, MA_OWNED);
|
|
/* Handle the rest of commands. */
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
/* Do we have a running request on slot? */
|
|
if (ch->slot[i].state < AHCI_SLOT_RUNNING)
|
|
continue;
|
|
ahci_end_transaction(&ch->slot[i], AHCI_ERR_TIMEOUT);
|
|
}
|
|
}
|
|
|
|
/* Must be called with channel locked. */
|
|
static void
|
|
ahci_rearm_timeout(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int i;
|
|
|
|
mtx_assert(&ch->mtx, MA_OWNED);
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
struct ahci_slot *slot = &ch->slot[i];
|
|
|
|
/* Do we have a running request on slot? */
|
|
if (slot->state < AHCI_SLOT_RUNNING)
|
|
continue;
|
|
if ((ch->toslots & (1 << i)) == 0)
|
|
continue;
|
|
callout_reset(&slot->timeout,
|
|
(int)slot->ccb->ccb_h.timeout * hz / 2000,
|
|
(timeout_t*)ahci_timeout, slot);
|
|
}
|
|
}
|
|
|
|
/* Locked by callout mechanism. */
|
|
static void
|
|
ahci_timeout(struct ahci_slot *slot)
|
|
{
|
|
device_t dev = slot->dev;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
uint32_t sstatus;
|
|
int ccs;
|
|
int i;
|
|
|
|
/* Check for stale timeout. */
|
|
if (slot->state < AHCI_SLOT_RUNNING)
|
|
return;
|
|
|
|
/* Check if slot was not being executed last time we checked. */
|
|
if (slot->state < AHCI_SLOT_EXECUTING) {
|
|
/* Check if slot started executing. */
|
|
sstatus = ATA_INL(ch->r_mem, AHCI_P_SACT);
|
|
ccs = (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CCS_MASK)
|
|
>> AHCI_P_CMD_CCS_SHIFT;
|
|
if ((sstatus & (1 << slot->slot)) != 0 || ccs == slot->slot ||
|
|
ch->fbs_enabled)
|
|
slot->state = AHCI_SLOT_EXECUTING;
|
|
|
|
callout_reset(&slot->timeout,
|
|
(int)slot->ccb->ccb_h.timeout * hz / 2000,
|
|
(timeout_t*)ahci_timeout, slot);
|
|
return;
|
|
}
|
|
|
|
device_printf(dev, "Timeout on slot %d port %d\n",
|
|
slot->slot, slot->ccb->ccb_h.target_id & 0x0f);
|
|
device_printf(dev, "is %08x cs %08x ss %08x rs %08x tfd %02x serr %08x\n",
|
|
ATA_INL(ch->r_mem, AHCI_P_IS), ATA_INL(ch->r_mem, AHCI_P_CI),
|
|
ATA_INL(ch->r_mem, AHCI_P_SACT), ch->rslots,
|
|
ATA_INL(ch->r_mem, AHCI_P_TFD), ATA_INL(ch->r_mem, AHCI_P_SERR));
|
|
|
|
/* Handle frozen command. */
|
|
if (ch->frozen) {
|
|
union ccb *fccb = ch->frozen;
|
|
ch->frozen = NULL;
|
|
fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
|
|
if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
|
|
xpt_freeze_devq(fccb->ccb_h.path, 1);
|
|
fccb->ccb_h.status |= CAM_DEV_QFRZN;
|
|
}
|
|
xpt_done(fccb);
|
|
}
|
|
if (!ch->fbs_enabled) {
|
|
/* Without FBS we know real timeout source. */
|
|
ch->fatalerr = 1;
|
|
/* Handle command with timeout. */
|
|
ahci_end_transaction(&ch->slot[slot->slot], AHCI_ERR_TIMEOUT);
|
|
/* Handle the rest of commands. */
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
/* Do we have a running request on slot? */
|
|
if (ch->slot[i].state < AHCI_SLOT_RUNNING)
|
|
continue;
|
|
ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT);
|
|
}
|
|
} else {
|
|
/* With FBS we wait for other commands timeout and pray. */
|
|
if (ch->toslots == 0)
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
ch->toslots |= (1 << slot->slot);
|
|
if ((ch->rslots & ~ch->toslots) == 0)
|
|
ahci_process_timeout(dev);
|
|
else
|
|
device_printf(dev, " ... waiting for slots %08x\n",
|
|
ch->rslots & ~ch->toslots);
|
|
}
|
|
}
|
|
|
|
/* Must be called with channel locked. */
|
|
static void
|
|
ahci_end_transaction(struct ahci_slot *slot, enum ahci_err_type et)
|
|
{
|
|
device_t dev = slot->dev;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
union ccb *ccb = slot->ccb;
|
|
struct ahci_cmd_list *clp;
|
|
int lastto;
|
|
uint32_t sig;
|
|
|
|
bus_dmamap_sync(ch->dma.work_tag, ch->dma.work_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
clp = (struct ahci_cmd_list *)
|
|
(ch->dma.work + AHCI_CL_OFFSET + (AHCI_CL_SIZE * slot->slot));
|
|
/* Read result registers to the result struct
|
|
* May be incorrect if several commands finished same time,
|
|
* so read only when sure or have to.
|
|
*/
|
|
if (ccb->ccb_h.func_code == XPT_ATA_IO) {
|
|
struct ata_res *res = &ccb->ataio.res;
|
|
|
|
if ((et == AHCI_ERR_TFE) ||
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)) {
|
|
u_int8_t *fis = ch->dma.rfis + 0x40;
|
|
|
|
bus_dmamap_sync(ch->dma.rfis_tag, ch->dma.rfis_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
if (ch->fbs_enabled) {
|
|
fis += ccb->ccb_h.target_id * 256;
|
|
res->status = fis[2];
|
|
res->error = fis[3];
|
|
} else {
|
|
uint16_t tfd = ATA_INL(ch->r_mem, AHCI_P_TFD);
|
|
|
|
res->status = tfd;
|
|
res->error = tfd >> 8;
|
|
}
|
|
res->lba_low = fis[4];
|
|
res->lba_mid = fis[5];
|
|
res->lba_high = fis[6];
|
|
res->device = fis[7];
|
|
res->lba_low_exp = fis[8];
|
|
res->lba_mid_exp = fis[9];
|
|
res->lba_high_exp = fis[10];
|
|
res->sector_count = fis[12];
|
|
res->sector_count_exp = fis[13];
|
|
|
|
/*
|
|
* Some weird controllers do not return signature in
|
|
* FIS receive area. Read it from PxSIG register.
|
|
*/
|
|
if ((ch->quirks & AHCI_Q_ALTSIG) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
|
|
(ccb->ataio.cmd.control & ATA_A_RESET) == 0) {
|
|
sig = ATA_INL(ch->r_mem, AHCI_P_SIG);
|
|
res->lba_high = sig >> 24;
|
|
res->lba_mid = sig >> 16;
|
|
res->lba_low = sig >> 8;
|
|
res->sector_count = sig;
|
|
}
|
|
} else
|
|
bzero(res, sizeof(*res));
|
|
if ((ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) == 0 &&
|
|
(ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
|
|
(ch->quirks & AHCI_Q_NOCOUNT) == 0) {
|
|
ccb->ataio.resid =
|
|
ccb->ataio.dxfer_len - le32toh(clp->bytecount);
|
|
}
|
|
} else {
|
|
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
|
|
(ch->quirks & AHCI_Q_NOCOUNT) == 0) {
|
|
ccb->csio.resid =
|
|
ccb->csio.dxfer_len - le32toh(clp->bytecount);
|
|
}
|
|
}
|
|
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
|
|
bus_dmamap_sync(ch->dma.data_tag, slot->dma.data_map,
|
|
(ccb->ccb_h.flags & CAM_DIR_IN) ?
|
|
BUS_DMASYNC_POSTREAD : BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(ch->dma.data_tag, slot->dma.data_map);
|
|
}
|
|
if (et != AHCI_ERR_NONE)
|
|
ch->eslots |= (1 << slot->slot);
|
|
/* In case of error, freeze device for proper recovery. */
|
|
if ((et != AHCI_ERR_NONE) && (!ch->recoverycmd) &&
|
|
!(ccb->ccb_h.status & CAM_DEV_QFRZN)) {
|
|
xpt_freeze_devq(ccb->ccb_h.path, 1);
|
|
ccb->ccb_h.status |= CAM_DEV_QFRZN;
|
|
}
|
|
/* Set proper result status. */
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
switch (et) {
|
|
case AHCI_ERR_NONE:
|
|
ccb->ccb_h.status |= CAM_REQ_CMP;
|
|
if (ccb->ccb_h.func_code == XPT_SCSI_IO)
|
|
ccb->csio.scsi_status = SCSI_STATUS_OK;
|
|
break;
|
|
case AHCI_ERR_INVALID:
|
|
ch->fatalerr = 1;
|
|
ccb->ccb_h.status |= CAM_REQ_INVALID;
|
|
break;
|
|
case AHCI_ERR_INNOCENT:
|
|
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
|
|
break;
|
|
case AHCI_ERR_TFE:
|
|
case AHCI_ERR_NCQ:
|
|
if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
|
|
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
|
|
ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
|
|
} else {
|
|
ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
|
|
}
|
|
break;
|
|
case AHCI_ERR_SATA:
|
|
ch->fatalerr = 1;
|
|
if (!ch->recoverycmd) {
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
|
|
}
|
|
ccb->ccb_h.status |= CAM_UNCOR_PARITY;
|
|
break;
|
|
case AHCI_ERR_TIMEOUT:
|
|
if (!ch->recoverycmd) {
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
|
|
}
|
|
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
|
|
break;
|
|
default:
|
|
ch->fatalerr = 1;
|
|
ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
|
|
}
|
|
/* Free slot. */
|
|
ch->oslots &= ~(1 << slot->slot);
|
|
ch->rslots &= ~(1 << slot->slot);
|
|
ch->aslots &= ~(1 << slot->slot);
|
|
slot->state = AHCI_SLOT_EMPTY;
|
|
slot->ccb = NULL;
|
|
/* Update channel stats. */
|
|
ch->numrslots--;
|
|
ch->numrslotspd[ccb->ccb_h.target_id]--;
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA)) {
|
|
ch->numtslots--;
|
|
ch->numtslotspd[ccb->ccb_h.target_id]--;
|
|
}
|
|
/* Cancel timeout state if request completed normally. */
|
|
if (et != AHCI_ERR_TIMEOUT) {
|
|
lastto = (ch->toslots == (1 << slot->slot));
|
|
ch->toslots &= ~(1 << slot->slot);
|
|
if (lastto)
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
/* If it was first request of reset sequence and there is no error,
|
|
* proceed to second request. */
|
|
if ((ccb->ccb_h.func_code == XPT_ATA_IO) &&
|
|
(ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
|
|
(ccb->ataio.cmd.control & ATA_A_RESET) &&
|
|
et == AHCI_ERR_NONE) {
|
|
ccb->ataio.cmd.control &= ~ATA_A_RESET;
|
|
ahci_begin_transaction(dev, ccb);
|
|
return;
|
|
}
|
|
/* If it was our READ LOG command - process it. */
|
|
if (ccb->ccb_h.recovery_type == RECOVERY_READ_LOG) {
|
|
ahci_process_read_log(dev, ccb);
|
|
/* If it was our REQUEST SENSE command - process it. */
|
|
} else if (ccb->ccb_h.recovery_type == RECOVERY_REQUEST_SENSE) {
|
|
ahci_process_request_sense(dev, ccb);
|
|
/* If it was NCQ or ATAPI command error, put result on hold. */
|
|
} else if (et == AHCI_ERR_NCQ ||
|
|
((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR &&
|
|
(ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)) {
|
|
ch->hold[slot->slot] = ccb;
|
|
ch->numhslots++;
|
|
} else
|
|
xpt_done(ccb);
|
|
/* If we have no other active commands, ... */
|
|
if (ch->rslots == 0) {
|
|
/* if there was fatal error - reset port. */
|
|
if (ch->toslots != 0 || ch->fatalerr) {
|
|
ahci_reset(dev);
|
|
} else {
|
|
/* if we have slots in error, we can reinit port. */
|
|
if (ch->eslots != 0) {
|
|
ahci_stop(dev);
|
|
ahci_clo(dev);
|
|
ahci_start(dev, 1);
|
|
}
|
|
/* if there commands on hold, we can do READ LOG. */
|
|
if (!ch->recoverycmd && ch->numhslots)
|
|
ahci_issue_recovery(dev);
|
|
}
|
|
/* If all the rest of commands are in timeout - give them chance. */
|
|
} else if ((ch->rslots & ~ch->toslots) == 0 &&
|
|
et != AHCI_ERR_TIMEOUT)
|
|
ahci_rearm_timeout(dev);
|
|
/* Unfreeze frozen command. */
|
|
if (ch->frozen && !ahci_check_collision(dev, ch->frozen)) {
|
|
union ccb *fccb = ch->frozen;
|
|
ch->frozen = NULL;
|
|
ahci_begin_transaction(dev, fccb);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
/* Start PM timer. */
|
|
if (ch->numrslots == 0 && ch->pm_level > 3 &&
|
|
(ch->curr[ch->pm_present ? 15 : 0].caps & CTS_SATA_CAPS_D_PMREQ)) {
|
|
callout_schedule(&ch->pm_timer,
|
|
(ch->pm_level == 4) ? hz / 1000 : hz / 8);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahci_issue_recovery(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
union ccb *ccb;
|
|
struct ccb_ataio *ataio;
|
|
struct ccb_scsiio *csio;
|
|
int i;
|
|
|
|
/* Find some held command. */
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
if (ch->hold[i])
|
|
break;
|
|
}
|
|
ccb = xpt_alloc_ccb_nowait();
|
|
if (ccb == NULL) {
|
|
device_printf(dev, "Unable to allocate recovery command\n");
|
|
completeall:
|
|
/* We can't do anything -- complete held commands. */
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
if (ch->hold[i] == NULL)
|
|
continue;
|
|
ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ch->hold[i]->ccb_h.status |= CAM_RESRC_UNAVAIL;
|
|
xpt_done(ch->hold[i]);
|
|
ch->hold[i] = NULL;
|
|
ch->numhslots--;
|
|
}
|
|
ahci_reset(dev);
|
|
return;
|
|
}
|
|
ccb->ccb_h = ch->hold[i]->ccb_h; /* Reuse old header. */
|
|
if (ccb->ccb_h.func_code == XPT_ATA_IO) {
|
|
/* READ LOG */
|
|
ccb->ccb_h.recovery_type = RECOVERY_READ_LOG;
|
|
ccb->ccb_h.func_code = XPT_ATA_IO;
|
|
ccb->ccb_h.flags = CAM_DIR_IN;
|
|
ccb->ccb_h.timeout = 1000; /* 1s should be enough. */
|
|
ataio = &ccb->ataio;
|
|
ataio->data_ptr = malloc(512, M_AHCI, M_NOWAIT);
|
|
if (ataio->data_ptr == NULL) {
|
|
xpt_free_ccb(ccb);
|
|
device_printf(dev,
|
|
"Unable to allocate memory for READ LOG command\n");
|
|
goto completeall;
|
|
}
|
|
ataio->dxfer_len = 512;
|
|
bzero(&ataio->cmd, sizeof(ataio->cmd));
|
|
ataio->cmd.flags = CAM_ATAIO_48BIT;
|
|
ataio->cmd.command = 0x2F; /* READ LOG EXT */
|
|
ataio->cmd.sector_count = 1;
|
|
ataio->cmd.sector_count_exp = 0;
|
|
ataio->cmd.lba_low = 0x10;
|
|
ataio->cmd.lba_mid = 0;
|
|
ataio->cmd.lba_mid_exp = 0;
|
|
} else {
|
|
/* REQUEST SENSE */
|
|
ccb->ccb_h.recovery_type = RECOVERY_REQUEST_SENSE;
|
|
ccb->ccb_h.recovery_slot = i;
|
|
ccb->ccb_h.func_code = XPT_SCSI_IO;
|
|
ccb->ccb_h.flags = CAM_DIR_IN;
|
|
ccb->ccb_h.status = 0;
|
|
ccb->ccb_h.timeout = 1000; /* 1s should be enough. */
|
|
csio = &ccb->csio;
|
|
csio->data_ptr = (void *)&ch->hold[i]->csio.sense_data;
|
|
csio->dxfer_len = ch->hold[i]->csio.sense_len;
|
|
csio->cdb_len = 6;
|
|
bzero(&csio->cdb_io, sizeof(csio->cdb_io));
|
|
csio->cdb_io.cdb_bytes[0] = 0x03;
|
|
csio->cdb_io.cdb_bytes[4] = csio->dxfer_len;
|
|
}
|
|
/* Freeze SIM while doing recovery. */
|
|
ch->recoverycmd = 1;
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
ahci_begin_transaction(dev, ccb);
|
|
}
|
|
|
|
static void
|
|
ahci_process_read_log(device_t dev, union ccb *ccb)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
uint8_t *data;
|
|
struct ata_res *res;
|
|
int i;
|
|
|
|
ch->recoverycmd = 0;
|
|
|
|
data = ccb->ataio.data_ptr;
|
|
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP &&
|
|
(data[0] & 0x80) == 0) {
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
if (!ch->hold[i])
|
|
continue;
|
|
if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO)
|
|
continue;
|
|
if ((data[0] & 0x1F) == i) {
|
|
res = &ch->hold[i]->ataio.res;
|
|
res->status = data[2];
|
|
res->error = data[3];
|
|
res->lba_low = data[4];
|
|
res->lba_mid = data[5];
|
|
res->lba_high = data[6];
|
|
res->device = data[7];
|
|
res->lba_low_exp = data[8];
|
|
res->lba_mid_exp = data[9];
|
|
res->lba_high_exp = data[10];
|
|
res->sector_count = data[12];
|
|
res->sector_count_exp = data[13];
|
|
} else {
|
|
ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ch->hold[i]->ccb_h.status |= CAM_REQUEUE_REQ;
|
|
}
|
|
xpt_done(ch->hold[i]);
|
|
ch->hold[i] = NULL;
|
|
ch->numhslots--;
|
|
}
|
|
} else {
|
|
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP)
|
|
device_printf(dev, "Error while READ LOG EXT\n");
|
|
else if ((data[0] & 0x80) == 0) {
|
|
device_printf(dev, "Non-queued command error in READ LOG EXT\n");
|
|
}
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
if (!ch->hold[i])
|
|
continue;
|
|
if (ch->hold[i]->ccb_h.func_code != XPT_ATA_IO)
|
|
continue;
|
|
xpt_done(ch->hold[i]);
|
|
ch->hold[i] = NULL;
|
|
ch->numhslots--;
|
|
}
|
|
}
|
|
free(ccb->ataio.data_ptr, M_AHCI);
|
|
xpt_free_ccb(ccb);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
|
|
static void
|
|
ahci_process_request_sense(device_t dev, union ccb *ccb)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int i;
|
|
|
|
ch->recoverycmd = 0;
|
|
|
|
i = ccb->ccb_h.recovery_slot;
|
|
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_CMP) {
|
|
ch->hold[i]->ccb_h.status |= CAM_AUTOSNS_VALID;
|
|
} else {
|
|
ch->hold[i]->ccb_h.status &= ~CAM_STATUS_MASK;
|
|
ch->hold[i]->ccb_h.status |= CAM_AUTOSENSE_FAIL;
|
|
}
|
|
xpt_done(ch->hold[i]);
|
|
ch->hold[i] = NULL;
|
|
ch->numhslots--;
|
|
xpt_free_ccb(ccb);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
|
|
static void
|
|
ahci_start(device_t dev, int fbs)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int32_t cmd;
|
|
|
|
/* Clear SATA error register */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xFFFFFFFF);
|
|
/* Clear any interrupts pending on this channel */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IS, 0xFFFFFFFF);
|
|
/* Configure FIS-based switching if supported. */
|
|
if (ch->chcaps & AHCI_P_CMD_FBSCP) {
|
|
ch->fbs_enabled = (fbs && ch->pm_present) ? 1 : 0;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_FBS,
|
|
ch->fbs_enabled ? AHCI_P_FBS_EN : 0);
|
|
}
|
|
/* Start operations on this channel */
|
|
cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
cmd &= ~AHCI_P_CMD_PMA;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_ST |
|
|
(ch->pm_present ? AHCI_P_CMD_PMA : 0));
|
|
}
|
|
|
|
static void
|
|
ahci_stop(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int32_t cmd;
|
|
int timeout;
|
|
|
|
/* Kill all activity on this channel */
|
|
cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_ST);
|
|
/* Wait for activity stop. */
|
|
timeout = 0;
|
|
do {
|
|
DELAY(10);
|
|
if (timeout++ > 50000) {
|
|
device_printf(dev, "stopping AHCI engine failed\n");
|
|
break;
|
|
}
|
|
} while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CR);
|
|
ch->eslots = 0;
|
|
}
|
|
|
|
static void
|
|
ahci_clo(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int32_t cmd;
|
|
int timeout;
|
|
|
|
/* Issue Command List Override if supported */
|
|
if (ch->caps & AHCI_CAP_SCLO) {
|
|
cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
cmd |= AHCI_P_CMD_CLO;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd);
|
|
timeout = 0;
|
|
do {
|
|
DELAY(10);
|
|
if (timeout++ > 50000) {
|
|
device_printf(dev, "executing CLO failed\n");
|
|
break;
|
|
}
|
|
} while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_CLO);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ahci_stop_fr(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int32_t cmd;
|
|
int timeout;
|
|
|
|
/* Kill all FIS reception on this channel */
|
|
cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd & ~AHCI_P_CMD_FRE);
|
|
/* Wait for FIS reception stop. */
|
|
timeout = 0;
|
|
do {
|
|
DELAY(10);
|
|
if (timeout++ > 50000) {
|
|
device_printf(dev, "stopping AHCI FR engine failed\n");
|
|
break;
|
|
}
|
|
} while (ATA_INL(ch->r_mem, AHCI_P_CMD) & AHCI_P_CMD_FR);
|
|
}
|
|
|
|
static void
|
|
ahci_start_fr(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int32_t cmd;
|
|
|
|
/* Start FIS reception on this channel */
|
|
cmd = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, cmd | AHCI_P_CMD_FRE);
|
|
}
|
|
|
|
static int
|
|
ahci_wait_ready(device_t dev, int t, int t0)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int timeout = 0;
|
|
uint32_t val;
|
|
|
|
while ((val = ATA_INL(ch->r_mem, AHCI_P_TFD)) &
|
|
(ATA_S_BUSY | ATA_S_DRQ)) {
|
|
if (timeout > t) {
|
|
if (t != 0) {
|
|
device_printf(dev,
|
|
"AHCI reset: device not ready after %dms "
|
|
"(tfd = %08x)\n",
|
|
MAX(t, 0) + t0, val);
|
|
}
|
|
return (EBUSY);
|
|
}
|
|
DELAY(1000);
|
|
timeout++;
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "AHCI reset: device ready after %dms\n",
|
|
timeout + t0);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ahci_reset_to(void *arg)
|
|
{
|
|
device_t dev = arg;
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
if (ch->resetting == 0)
|
|
return;
|
|
ch->resetting--;
|
|
if (ahci_wait_ready(dev, ch->resetting == 0 ? -1 : 0,
|
|
(310 - ch->resetting) * 100) == 0) {
|
|
ch->resetting = 0;
|
|
ahci_start(dev, 1);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
return;
|
|
}
|
|
if (ch->resetting == 0) {
|
|
ahci_clo(dev);
|
|
ahci_start(dev, 1);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
return;
|
|
}
|
|
callout_schedule(&ch->reset_timer, hz / 10);
|
|
}
|
|
|
|
static void
|
|
ahci_reset(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
struct ahci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
int i;
|
|
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
if (bootverbose)
|
|
device_printf(dev, "AHCI reset...\n");
|
|
/* Forget about previous reset. */
|
|
if (ch->resetting) {
|
|
ch->resetting = 0;
|
|
callout_stop(&ch->reset_timer);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
/* Requeue freezed command. */
|
|
if (ch->frozen) {
|
|
union ccb *fccb = ch->frozen;
|
|
ch->frozen = NULL;
|
|
fccb->ccb_h.status = CAM_REQUEUE_REQ | CAM_RELEASE_SIMQ;
|
|
if (!(fccb->ccb_h.status & CAM_DEV_QFRZN)) {
|
|
xpt_freeze_devq(fccb->ccb_h.path, 1);
|
|
fccb->ccb_h.status |= CAM_DEV_QFRZN;
|
|
}
|
|
xpt_done(fccb);
|
|
}
|
|
/* Kill the engine and requeue all running commands. */
|
|
ahci_stop(dev);
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
/* Do we have a running request on slot? */
|
|
if (ch->slot[i].state < AHCI_SLOT_RUNNING)
|
|
continue;
|
|
/* XXX; Commands in loading state. */
|
|
ahci_end_transaction(&ch->slot[i], AHCI_ERR_INNOCENT);
|
|
}
|
|
for (i = 0; i < ch->numslots; i++) {
|
|
if (!ch->hold[i])
|
|
continue;
|
|
xpt_done(ch->hold[i]);
|
|
ch->hold[i] = NULL;
|
|
ch->numhslots--;
|
|
}
|
|
if (ch->toslots != 0)
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
ch->eslots = 0;
|
|
ch->toslots = 0;
|
|
ch->fatalerr = 0;
|
|
/* Tell the XPT about the event */
|
|
xpt_async(AC_BUS_RESET, ch->path, NULL);
|
|
/* Disable port interrupts */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IE, 0);
|
|
/* Reset and reconnect PHY, */
|
|
if (!ahci_sata_phy_reset(dev)) {
|
|
if (bootverbose)
|
|
device_printf(dev,
|
|
"AHCI reset: device not found\n");
|
|
ch->devices = 0;
|
|
/* Enable wanted port interrupts */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IE,
|
|
(((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) |
|
|
AHCI_P_IX_PRC | AHCI_P_IX_PC));
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
return;
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "AHCI reset: device found\n");
|
|
/* Wait for clearing busy status. */
|
|
if (ahci_wait_ready(dev, dumping ? 31000 : 0, 0)) {
|
|
if (dumping)
|
|
ahci_clo(dev);
|
|
else
|
|
ch->resetting = 310;
|
|
}
|
|
ch->devices = 1;
|
|
/* Enable wanted port interrupts */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_IE,
|
|
(((ch->pm_level != 0) ? AHCI_P_IX_CPD | AHCI_P_IX_MP : 0) |
|
|
AHCI_P_IX_TFE | AHCI_P_IX_HBF |
|
|
AHCI_P_IX_HBD | AHCI_P_IX_IF | AHCI_P_IX_OF |
|
|
((ch->pm_level == 0) ? AHCI_P_IX_PRC : 0) | AHCI_P_IX_PC |
|
|
AHCI_P_IX_DP | AHCI_P_IX_UF | (ctlr->ccc ? 0 : AHCI_P_IX_SDB) |
|
|
AHCI_P_IX_DS | AHCI_P_IX_PS | (ctlr->ccc ? 0 : AHCI_P_IX_DHR)));
|
|
if (ch->resetting)
|
|
callout_reset(&ch->reset_timer, hz / 10, ahci_reset_to, dev);
|
|
else {
|
|
ahci_start(dev, 1);
|
|
xpt_release_simq(ch->sim, TRUE);
|
|
}
|
|
}
|
|
|
|
static int
|
|
ahci_setup_fis(device_t dev, struct ahci_cmd_tab *ctp, union ccb *ccb, int tag)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
u_int8_t *fis = &ctp->cfis[0];
|
|
|
|
bzero(ctp->cfis, 64);
|
|
fis[0] = 0x27; /* host to device */
|
|
fis[1] = (ccb->ccb_h.target_id & 0x0f);
|
|
if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
|
|
fis[1] |= 0x80;
|
|
fis[2] = ATA_PACKET_CMD;
|
|
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
|
|
ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA)
|
|
fis[3] = ATA_F_DMA;
|
|
else {
|
|
fis[5] = ccb->csio.dxfer_len;
|
|
fis[6] = ccb->csio.dxfer_len >> 8;
|
|
}
|
|
fis[7] = ATA_D_LBA;
|
|
fis[15] = ATA_A_4BIT;
|
|
bzero(ctp->acmd, 32);
|
|
bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
|
|
ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes,
|
|
ctp->acmd, ccb->csio.cdb_len);
|
|
} else if ((ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) == 0) {
|
|
fis[1] |= 0x80;
|
|
fis[2] = ccb->ataio.cmd.command;
|
|
fis[3] = ccb->ataio.cmd.features;
|
|
fis[4] = ccb->ataio.cmd.lba_low;
|
|
fis[5] = ccb->ataio.cmd.lba_mid;
|
|
fis[6] = ccb->ataio.cmd.lba_high;
|
|
fis[7] = ccb->ataio.cmd.device;
|
|
fis[8] = ccb->ataio.cmd.lba_low_exp;
|
|
fis[9] = ccb->ataio.cmd.lba_mid_exp;
|
|
fis[10] = ccb->ataio.cmd.lba_high_exp;
|
|
fis[11] = ccb->ataio.cmd.features_exp;
|
|
if (ccb->ataio.cmd.flags & CAM_ATAIO_FPDMA) {
|
|
fis[12] = tag << 3;
|
|
fis[13] = 0;
|
|
} else {
|
|
fis[12] = ccb->ataio.cmd.sector_count;
|
|
fis[13] = ccb->ataio.cmd.sector_count_exp;
|
|
}
|
|
fis[15] = ATA_A_4BIT;
|
|
} else {
|
|
fis[15] = ccb->ataio.cmd.control;
|
|
}
|
|
return (20);
|
|
}
|
|
|
|
static int
|
|
ahci_sata_connect(struct ahci_channel *ch)
|
|
{
|
|
u_int32_t status;
|
|
int timeout, found = 0;
|
|
|
|
/* Wait up to 100ms for "connect well" */
|
|
for (timeout = 0; timeout < 1000 ; timeout++) {
|
|
status = ATA_INL(ch->r_mem, AHCI_P_SSTS);
|
|
if ((status & ATA_SS_DET_MASK) != ATA_SS_DET_NO_DEVICE)
|
|
found = 1;
|
|
if (((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_ONLINE) &&
|
|
((status & ATA_SS_SPD_MASK) != ATA_SS_SPD_NO_SPEED) &&
|
|
((status & ATA_SS_IPM_MASK) == ATA_SS_IPM_ACTIVE))
|
|
break;
|
|
if ((status & ATA_SS_DET_MASK) == ATA_SS_DET_PHY_OFFLINE) {
|
|
if (bootverbose) {
|
|
device_printf(ch->dev, "SATA offline status=%08x\n",
|
|
status);
|
|
}
|
|
return (0);
|
|
}
|
|
if (found == 0 && timeout >= 100)
|
|
break;
|
|
DELAY(100);
|
|
}
|
|
if (timeout >= 1000 || !found) {
|
|
if (bootverbose) {
|
|
device_printf(ch->dev,
|
|
"SATA connect timeout time=%dus status=%08x\n",
|
|
timeout * 100, status);
|
|
}
|
|
return (0);
|
|
}
|
|
if (bootverbose) {
|
|
device_printf(ch->dev, "SATA connect time=%dus status=%08x\n",
|
|
timeout * 100, status);
|
|
}
|
|
/* Clear SATA error register */
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SERR, 0xffffffff);
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
ahci_sata_phy_reset(device_t dev)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
int sata_rev;
|
|
uint32_t val;
|
|
|
|
if (ch->listening) {
|
|
val = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
val |= AHCI_P_CMD_SUD;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, val);
|
|
ch->listening = 0;
|
|
}
|
|
sata_rev = ch->user[ch->pm_present ? 15 : 0].revision;
|
|
if (sata_rev == 1)
|
|
val = ATA_SC_SPD_SPEED_GEN1;
|
|
else if (sata_rev == 2)
|
|
val = ATA_SC_SPD_SPEED_GEN2;
|
|
else if (sata_rev == 3)
|
|
val = ATA_SC_SPD_SPEED_GEN3;
|
|
else
|
|
val = 0;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SCTL,
|
|
ATA_SC_DET_RESET | val |
|
|
ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER);
|
|
DELAY(1000);
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SCTL,
|
|
ATA_SC_DET_IDLE | val | ((ch->pm_level > 0) ? 0 :
|
|
(ATA_SC_IPM_DIS_PARTIAL | ATA_SC_IPM_DIS_SLUMBER)));
|
|
if (!ahci_sata_connect(ch)) {
|
|
if (ch->caps & AHCI_CAP_SSS) {
|
|
val = ATA_INL(ch->r_mem, AHCI_P_CMD);
|
|
val &= ~AHCI_P_CMD_SUD;
|
|
ATA_OUTL(ch->r_mem, AHCI_P_CMD, val);
|
|
ch->listening = 1;
|
|
} else if (ch->pm_level > 0)
|
|
ATA_OUTL(ch->r_mem, AHCI_P_SCTL, ATA_SC_DET_DISABLE);
|
|
return (0);
|
|
}
|
|
return (1);
|
|
}
|
|
|
|
static int
|
|
ahci_check_ids(device_t dev, union ccb *ccb)
|
|
{
|
|
struct ahci_channel *ch = device_get_softc(dev);
|
|
|
|
if (ccb->ccb_h.target_id > ((ch->caps & AHCI_CAP_SPM) ? 15 : 0)) {
|
|
ccb->ccb_h.status = CAM_TID_INVALID;
|
|
xpt_done(ccb);
|
|
return (-1);
|
|
}
|
|
if (ccb->ccb_h.target_lun != 0) {
|
|
ccb->ccb_h.status = CAM_LUN_INVALID;
|
|
xpt_done(ccb);
|
|
return (-1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ahciaction(struct cam_sim *sim, union ccb *ccb)
|
|
{
|
|
device_t dev, parent;
|
|
struct ahci_channel *ch;
|
|
|
|
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahciaction func_code=%x\n",
|
|
ccb->ccb_h.func_code));
|
|
|
|
ch = (struct ahci_channel *)cam_sim_softc(sim);
|
|
dev = ch->dev;
|
|
switch (ccb->ccb_h.func_code) {
|
|
/* Common cases first */
|
|
case XPT_ATA_IO: /* Execute the requested I/O operation */
|
|
case XPT_SCSI_IO:
|
|
if (ahci_check_ids(dev, ccb))
|
|
return;
|
|
if (ch->devices == 0 ||
|
|
(ch->pm_present == 0 &&
|
|
ccb->ccb_h.target_id > 0 && ccb->ccb_h.target_id < 15)) {
|
|
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
break;
|
|
}
|
|
ccb->ccb_h.recovery_type = RECOVERY_NONE;
|
|
/* Check for command collision. */
|
|
if (ahci_check_collision(dev, ccb)) {
|
|
/* Freeze command. */
|
|
ch->frozen = ccb;
|
|
/* We have only one frozen slot, so freeze simq also. */
|
|
xpt_freeze_simq(ch->sim, 1);
|
|
return;
|
|
}
|
|
ahci_begin_transaction(dev, ccb);
|
|
return;
|
|
case XPT_EN_LUN: /* Enable LUN as a target */
|
|
case XPT_TARGET_IO: /* Execute target I/O request */
|
|
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
|
|
case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
|
|
case XPT_ABORT: /* Abort the specified CCB */
|
|
/* XXX Implement */
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
break;
|
|
case XPT_SET_TRAN_SETTINGS:
|
|
{
|
|
struct ccb_trans_settings *cts = &ccb->cts;
|
|
struct ahci_device *d;
|
|
|
|
if (ahci_check_ids(dev, ccb))
|
|
return;
|
|
if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
|
|
d = &ch->curr[ccb->ccb_h.target_id];
|
|
else
|
|
d = &ch->user[ccb->ccb_h.target_id];
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
|
|
d->revision = cts->xport_specific.sata.revision;
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE)
|
|
d->mode = cts->xport_specific.sata.mode;
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT)
|
|
d->bytecount = min(8192, cts->xport_specific.sata.bytecount);
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_TAGS)
|
|
d->tags = min(ch->numslots, cts->xport_specific.sata.tags);
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_PM)
|
|
ch->pm_present = cts->xport_specific.sata.pm_present;
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI)
|
|
d->atapi = cts->xport_specific.sata.atapi;
|
|
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
|
|
d->caps = cts->xport_specific.sata.caps;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
break;
|
|
}
|
|
case XPT_GET_TRAN_SETTINGS:
|
|
/* Get default/user set transfer settings for the target */
|
|
{
|
|
struct ccb_trans_settings *cts = &ccb->cts;
|
|
struct ahci_device *d;
|
|
uint32_t status;
|
|
|
|
if (ahci_check_ids(dev, ccb))
|
|
return;
|
|
if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
|
|
d = &ch->curr[ccb->ccb_h.target_id];
|
|
else
|
|
d = &ch->user[ccb->ccb_h.target_id];
|
|
cts->protocol = PROTO_ATA;
|
|
cts->protocol_version = PROTO_VERSION_UNSPECIFIED;
|
|
cts->transport = XPORT_SATA;
|
|
cts->transport_version = XPORT_VERSION_UNSPECIFIED;
|
|
cts->proto_specific.valid = 0;
|
|
cts->xport_specific.sata.valid = 0;
|
|
if (cts->type == CTS_TYPE_CURRENT_SETTINGS &&
|
|
(ccb->ccb_h.target_id == 15 ||
|
|
(ccb->ccb_h.target_id == 0 && !ch->pm_present))) {
|
|
status = ATA_INL(ch->r_mem, AHCI_P_SSTS) & ATA_SS_SPD_MASK;
|
|
if (status & 0x0f0) {
|
|
cts->xport_specific.sata.revision =
|
|
(status & 0x0f0) >> 4;
|
|
cts->xport_specific.sata.valid |=
|
|
CTS_SATA_VALID_REVISION;
|
|
}
|
|
cts->xport_specific.sata.caps = d->caps & CTS_SATA_CAPS_D;
|
|
if (ch->pm_level) {
|
|
if (ch->caps & (AHCI_CAP_PSC | AHCI_CAP_SSC))
|
|
cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_PMREQ;
|
|
if (ch->caps2 & AHCI_CAP2_APST)
|
|
cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_APST;
|
|
}
|
|
if ((ch->caps & AHCI_CAP_SNCQ) &&
|
|
(ch->quirks & AHCI_Q_NOAA) == 0)
|
|
cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_DMAAA;
|
|
cts->xport_specific.sata.caps |= CTS_SATA_CAPS_H_AN;
|
|
cts->xport_specific.sata.caps &=
|
|
ch->user[ccb->ccb_h.target_id].caps;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
|
|
} else {
|
|
cts->xport_specific.sata.revision = d->revision;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION;
|
|
cts->xport_specific.sata.caps = d->caps;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
|
|
}
|
|
cts->xport_specific.sata.mode = d->mode;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE;
|
|
cts->xport_specific.sata.bytecount = d->bytecount;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT;
|
|
cts->xport_specific.sata.pm_present = ch->pm_present;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_PM;
|
|
cts->xport_specific.sata.tags = d->tags;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_TAGS;
|
|
cts->xport_specific.sata.atapi = d->atapi;
|
|
cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI;
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
break;
|
|
}
|
|
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
|
|
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
|
|
ahci_reset(dev);
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
break;
|
|
case XPT_TERM_IO: /* Terminate the I/O process */
|
|
/* XXX Implement */
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
break;
|
|
case XPT_PATH_INQ: /* Path routing inquiry */
|
|
{
|
|
struct ccb_pathinq *cpi = &ccb->cpi;
|
|
|
|
parent = device_get_parent(dev);
|
|
cpi->version_num = 1; /* XXX??? */
|
|
cpi->hba_inquiry = PI_SDTR_ABLE;
|
|
if (ch->caps & AHCI_CAP_SNCQ)
|
|
cpi->hba_inquiry |= PI_TAG_ABLE;
|
|
if (ch->caps & AHCI_CAP_SPM)
|
|
cpi->hba_inquiry |= PI_SATAPM;
|
|
cpi->target_sprt = 0;
|
|
cpi->hba_misc = PIM_SEQSCAN;
|
|
cpi->hba_eng_cnt = 0;
|
|
if (ch->caps & AHCI_CAP_SPM)
|
|
cpi->max_target = 15;
|
|
else
|
|
cpi->max_target = 0;
|
|
cpi->max_lun = 0;
|
|
cpi->initiator_id = 0;
|
|
cpi->bus_id = cam_sim_bus(sim);
|
|
cpi->base_transfer_speed = 150000;
|
|
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
|
|
strncpy(cpi->hba_vid, "AHCI", HBA_IDLEN);
|
|
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
|
|
cpi->unit_number = cam_sim_unit(sim);
|
|
cpi->transport = XPORT_SATA;
|
|
cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
|
|
cpi->protocol = PROTO_ATA;
|
|
cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
|
|
cpi->maxio = MAXPHYS;
|
|
/* ATI SB600 can't handle 256 sectors with FPDMA (NCQ). */
|
|
if (pci_get_devid(parent) == 0x43801002)
|
|
cpi->maxio = min(cpi->maxio, 128 * 512);
|
|
cpi->hba_vendor = pci_get_vendor(parent);
|
|
cpi->hba_device = pci_get_device(parent);
|
|
cpi->hba_subvendor = pci_get_subvendor(parent);
|
|
cpi->hba_subdevice = pci_get_subdevice(parent);
|
|
cpi->ccb_h.status = CAM_REQ_CMP;
|
|
break;
|
|
}
|
|
default:
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
break;
|
|
}
|
|
xpt_done(ccb);
|
|
}
|
|
|
|
static void
|
|
ahcipoll(struct cam_sim *sim)
|
|
{
|
|
struct ahci_channel *ch = (struct ahci_channel *)cam_sim_softc(sim);
|
|
|
|
ahci_ch_intr(ch->dev);
|
|
if (ch->resetting != 0 &&
|
|
(--ch->resetpolldiv <= 0 || !callout_pending(&ch->reset_timer))) {
|
|
ch->resetpolldiv = 1000;
|
|
ahci_reset_to(ch->dev);
|
|
}
|
|
}
|