freebsd-dev/etc/etc.sparc64/ttys
Ed Schouten bcc7f0f408 Remove pseudo-terminals from ttys(5).
When we had utmp(5), we had to list all the psuedo-terminals in ttys(5)
to make ttyslot(3) function properly. Now that pututxline(3) deals with
slot allocation internally (not based on TTY names), we don't need to
list all the TTYs on the system in ttys(5) to make user accounting work
properly.

This patch removes all the entries from the /etc/ttys files, but also
the pts(4) entries that were appended implicitly, which was added in
r154838.
2010-01-27 11:54:42 +00:00

56 lines
2.2 KiB
Plaintext

#
# $FreeBSD$
# @(#)ttys 5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs. Common entries for the
# various columns include:
#
# name The name of the terminal device.
#
# getty The program to start running on the terminal. Typically a
# getty program, as the name implies. Other common entries
# include none, when no getty is needed, and xdm, to start the
# X Window System.
#
# type The initial terminal type for this port. For hardwired
# terminal lines, this will contain the type of terminal used.
# For virtual consoles, the correct type is typically xterm.
# Other common values include network for network connections on
# pseudo-terminals, dialup for incoming modem ports, and unknown
# when the terminal type cannot be predetermined.
#
# status Must be on or off. If on, init will run the getty program on
# the specified port. If the word "secure" appears, this tty
# allows root login.
#
# name getty type status comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console none unknown off secure
# ofw_console(4)
screen "/usr/libexec/getty Pc" vt100 off secure
ttya "/usr/libexec/getty 3wire.9600" vt100 off secure
ttyb "/usr/libexec/getty 3wire.9600" vt100 off secure
# syscons(4)
ttyv0 "/usr/libexec/getty Pc" xterm on secure
# Virtual terminals
ttyv1 "/usr/libexec/getty Pc" xterm on secure
ttyv2 "/usr/libexec/getty Pc" xterm on secure
ttyv3 "/usr/libexec/getty Pc" xterm on secure
ttyv4 "/usr/libexec/getty Pc" xterm on secure
ttyv5 "/usr/libexec/getty Pc" xterm on secure
ttyv6 "/usr/libexec/getty Pc" xterm on secure
ttyv7 "/usr/libexec/getty Pc" xterm on secure
ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
# uart(4)
ttyu0 "/usr/libexec/getty std.9600" vt100 on secure
ttyu1 "/usr/libexec/getty std.9600" vt100 on secure
ttyu2 "/usr/libexec/getty std.9600" vt100 on secure
ttyu3 "/usr/libexec/getty std.9600" vt100 off secure
# Dumb console
dcons "/usr/libexec/getty std.9600" vt100 off secure