d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
91cc2adb2e
freebsd-dev/sys/pci
History
Bill Paul 91cc2adb2e Fix some problems reported by Mike Pritchard: 
- Add a flag DC_TX_INTR_ALWAYS which causes the transmit code to
  request a TX done interrupt for every packet. The PNIC seems to need
  this to insure that the sent TX buffers get reaped in a timely fashion.

- Try to unreset the SIA as soon as possible after resetting the whole
  chip.

- Change dcphy to support either 10/100 or 10Mbps only NICs. The
  built-in 21143 ethernet in Compaq Presario machines is 10Mbps only
  and it doesn't work right if we try to advertise 100Mbps modes during
  autoneg. When restricted to only 10mbps modes, it works fine.

  Note that for now, I detect this condition by checking the PCI
  subsystem ID on this NIC (which has a Compaq vendor/device ID).
  Yes, I know that's what the SROM is supposed to be for. I'm deliberately
  ignoring the SROM wherever possible. Sue me.

The latter two fixes allow if_dc to work correctly with the built-in
ethernet on certain Compaq Presario boxes. There are liable to be quite
a few people using these as their home systems who might want to try
FreeBSD; may as well be nice to them.

Now if anybody out there has an Alpha miata with 10Mbps ethernet and
can show me the output from pciconf -l on their system, I'd be grateful.
1999-12-13 21:45:13 +00:00
..
adv_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
adw_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ahc_pci.c When booting verbose, indicate if we are using manual termination 1999-12-12 04:54:14 +00:00
alpm.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
amd.c Properly set the alignment argument to bus_dma_tag_create(). If we 1999-08-16 01:52:21 +00:00
amd.h First cut at a driver for the amd53c974 PCI SCSI host adapter. This 1999-05-22 21:50:40 +00:00
cy_pci.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
cy_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
dc21040reg.h s/Id/FreeBSD/ 1999-08-09 12:52:49 +00:00
ida_pci.c Removal of sys/device.h 1999-10-05 21:19:41 +00:00
ide_pci.c Remove some horrible #if 0'd code that has no hope of working now. It 1999-12-12 14:47:23 +00:00
ide_pcireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_ar_p.c Add support for the PCI version of the Digi SYNC/570i cards. 1999-10-17 09:40:04 +00:00
if_dc.c Fix some problems reported by Mike Pritchard: 1999-12-13 21:45:13 +00:00
if_dcreg.h Fix some problems reported by Mike Pritchard: 1999-12-13 21:45:13 +00:00
if_de.c Remove NBPF conditionality of bpf calls in most of our network drivers. 1999-09-25 12:06:01 +00:00
if_devar.h A little more tidying up. 1999-08-09 14:43:39 +00:00
if_en_pci.c Clean up after removing sys/eventhandler.h from sys/systm.h at the last 1999-08-21 22:10:49 +00:00
if_fpa.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_fxp.c Make the fxp driver work on alpha, rather than panic the machine on boot 1999-09-30 19:03:12 +00:00
if_fxpreg.h Make the fxp driver work on alpha, rather than panic the machine on boot 1999-09-30 19:03:12 +00:00
if_fxpvar.h Make the fxp driver work on alpha, rather than panic the machine on boot 1999-09-30 19:03:12 +00:00
if_lnc_p.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_mn.c Add NULL for new entrypoint. 1999-12-01 09:37:28 +00:00
if_rl.c Fix usage of m_pullup(). 1999-11-16 15:34:52 +00:00
if_rlreg.h Make some tweaks to the RealTek driver: 1999-10-21 19:42:03 +00:00
if_sf.c Modify the Adaptec "starfire" driver to reset the PHY on the MII bus 1999-12-05 20:02:45 +00:00
if_sfreg.h Modify the Adaptec "starfire" driver to reset the PHY on the MII bus 1999-12-05 20:02:45 +00:00
if_sis.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_sisreg.h This commit adds driver support for the Silicon Integrated Systems 1999-09-05 21:01:03 +00:00
if_sk.c Call sk_start() at the end of sk_intr() if there's packets in the 1999-09-25 04:50:27 +00:00
if_skreg.h Fix the mechanism used to choose the unit numbers for the IP interfaces 1999-09-18 04:01:31 +00:00
if_sr_p.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
if_ste.c Spruce up the Sundance ST201 driver: 1999-12-07 20:14:42 +00:00
if_stereg.h Spruce up the Sundance ST201 driver: 1999-12-07 20:14:42 +00:00
if_ti.c As suggested by phk, unconditionalize BPF support in these drivers. Since 1999-09-23 03:32:57 +00:00
if_tireg.h Update the Tigon driver firmware images to the latest release from 1999-09-22 06:43:16 +00:00
if_tl.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_tlreg.h Make some small performance tweaks to the tl driver. This should hopefully 1999-09-19 22:39:24 +00:00
if_tx.c Added code to enable BusMaster operations. 1999-10-29 09:56:52 +00:00
if_txvar.h Added code to enable BusMaster operations. 1999-10-29 09:56:52 +00:00
if_vr.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_vrreg.h Convert the VIA Rhine driver to miibus. 1999-09-19 22:03:31 +00:00
if_vx_pci.c Clean up after removing sys/eventhandler.h from sys/systm.h at the last 1999-08-21 22:10:49 +00:00
if_wb.c Change contigmalloc() lower memory bound from 1MB to 0 to improve 1999-09-25 17:29:02 +00:00
if_wbreg.h Convert the Adaptec and Winbond drivers to miibus. 1999-08-30 23:08:32 +00:00
if_xl.c Small tweak: just reset the transmit block instead of doing a global reset 1999-10-25 20:52:32 +00:00
if_xlreg.h Make some small tweaks: 1999-10-14 21:49:17 +00:00
intpm.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
intpmreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
isp_pci.c Fix dmasetup functions to have 16 bit queue indices. Get the chip revision 1999-11-21 02:56:17 +00:00
locate.pl MFS: Change path to perl. 1999-08-30 14:41:09 +00:00
meteor_reg.h Convert DEVFS hooks in (most) drivers to make_dev(). 1999-08-23 20:59:21 +00:00
meteor.c Remove five now unused fields from struct cdevsw. They should never 1999-09-25 18:24:47 +00:00
ncr.c Remove calls to alpha_register_pci_scsi(). After Mike's recent boot 1999-11-05 13:10:39 +00:00
ncrreg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ohci_pci.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
pccbb.c Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pccbbreg.h Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pccbbvar.h Initial import of cardbus bridge driver (cbb) from the latest 1999-11-18 07:14:54 +00:00
pci_compat.c * Implement bus_set/get/delete_resource for pci. 1999-10-14 21:38:33 +00:00
pci_if.m $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
pci.c Make the usb and ide/ata device identification a little saner. Rather than 1999-12-10 17:44:22 +00:00
pcic_p.c Add the PCI id for the TI PCI-1251B PCI-CardBus bridge. 1999-11-28 13:37:35 +00:00
pcic_p.h Add the PCI id for the TI PCI-1251B PCI-CardBus bridge. 1999-11-28 13:37:35 +00:00
pcireg.h Add the 16550 programming interface code for PCIS_SIMPLECOMM_UART. 1999-10-09 16:00:56 +00:00
pcisupport.c Make the usb and ide/ata device identification a little saner. Rather than 1999-12-10 17:44:22 +00:00
pcivar.h Make the usb and ide/ata device identification a little saner. Rather than 1999-12-10 17:44:22 +00:00
scsiiom.c Use [u]intptr_t instead of [unsigned] long to convert and/or represent 1998-08-10 17:21:49 +00:00
simos.c $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
simos.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
ti_fw2.h Update the Tigon driver firmware images to the latest release from 1999-09-22 06:43:16 +00:00
ti_fw.h Update the Tigon driver firmware images to the latest release from 1999-09-22 06:43:16 +00:00
uhci_pci.c Remove the 'ivars' arguement to device_add_child() and 1999-12-03 08:41:24 +00:00
xmaciireg.h $Id$ -> $FreeBSD$ 1999-08-28 01:08:13 +00:00
xrpu.c Remove five now unused fields from struct cdevsw. They should never 1999-09-25 18:24:47 +00:00