freebsd-dev/sys/dev/mrsas/mrsas_ioctl.c
Kashyap D Desai dbcc81dfdc Corrected indentation on conflicted source files.
Reviewed by:	ambrisko
MFC after:	2 weeks
Sponsored by:	AVAGO Technologies
2015-05-06 10:46:28 +00:00

508 lines
16 KiB
C

/*
* Copyright (c) 2015, AVAGO Tech. All rights reserved. Author: Marian Choy
* Copyright (c) 2014, LSI Corp. All rights reserved. Author: Marian Choy
* Support: freebsdraid@avagotech.com
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer. 2. Redistributions
* in binary form must reproduce the above copyright notice, this list of
* conditions and the following disclaimer in the documentation and/or other
* materials provided with the distribution. 3. Neither the name of the
* <ORGANIZATION> nor the names of its contributors may be used to endorse or
* promote products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* The views and conclusions contained in the software and documentation are
* those of the authors and should not be interpreted as representing
* official policies,either expressed or implied, of the FreeBSD Project.
*
* Send feedback to: <megaraidfbsd@avagotech.com> Mail to: AVAGO TECHNOLOGIES, 1621
* Barber Lane, Milpitas, CA 95035 ATTN: MegaRaid FreeBSD
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <dev/mrsas/mrsas.h>
#include <dev/mrsas/mrsas_ioctl.h>
/*
* Function prototypes
*/
int mrsas_alloc_mfi_cmds(struct mrsas_softc *sc);
int mrsas_passthru(struct mrsas_softc *sc, void *arg, u_long ioctlCmd);
void mrsas_free_ioc_cmd(struct mrsas_softc *sc);
void mrsas_free_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
void *mrsas_alloc_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd);
static int mrsas_create_frame_pool(struct mrsas_softc *sc);
static void
mrsas_alloc_cb(void *arg, bus_dma_segment_t *segs,
int nsegs, int error);
extern struct mrsas_mfi_cmd *mrsas_get_mfi_cmd(struct mrsas_softc *sc);
extern void mrsas_release_mfi_cmd(struct mrsas_mfi_cmd *cmd);
extern int
mrsas_issue_blocked_cmd(struct mrsas_softc *sc,
struct mrsas_mfi_cmd *cmd);
/*
* mrsas_passthru: Handle pass-through commands
* input: Adapter instance soft state argument pointer
*
* This function is called from mrsas_ioctl() to handle pass-through and ioctl
* commands to Firmware.
*/
int
mrsas_passthru(struct mrsas_softc *sc, void *arg, u_long ioctlCmd)
{
struct mrsas_iocpacket *user_ioc = (struct mrsas_iocpacket *)arg;
#ifdef COMPAT_FREEBSD32
struct mrsas_iocpacket32 *user_ioc32 = (struct mrsas_iocpacket32 *)arg;
#endif
union mrsas_frame *in_cmd = (union mrsas_frame *)&(user_ioc->frame.raw);
struct mrsas_mfi_cmd *cmd = NULL;
bus_dma_tag_t ioctl_data_tag[MAX_IOCTL_SGE];
bus_dmamap_t ioctl_data_dmamap[MAX_IOCTL_SGE];
void *ioctl_data_mem[MAX_IOCTL_SGE];
bus_addr_t ioctl_data_phys_addr[MAX_IOCTL_SGE];
bus_dma_tag_t ioctl_sense_tag = 0;
bus_dmamap_t ioctl_sense_dmamap = 0;
void *ioctl_sense_mem = 0;
bus_addr_t ioctl_sense_phys_addr = 0;
int i, ioctl_data_size = 0, ioctl_sense_size, ret = 0;
struct mrsas_sge32 *kern_sge32;
unsigned long *sense_ptr;
uint8_t *iov_base_ptrin = NULL;
size_t iov_len = 0;
/*
* Check for NOP from MegaCli... MegaCli can issue a DCMD of 0. In
* this case do nothing and return 0 to it as status.
*/
if (in_cmd->dcmd.opcode == 0) {
device_printf(sc->mrsas_dev, "In %s() Got a NOP\n", __func__);
user_ioc->frame.hdr.cmd_status = MFI_STAT_OK;
return (0);
}
/* Validate SGL length */
if (user_ioc->sge_count > MAX_IOCTL_SGE) {
device_printf(sc->mrsas_dev, "In %s() SGL is too long (%d > 8).\n",
__func__, user_ioc->sge_count);
return (ENOENT);
}
/* Get a command */
cmd = mrsas_get_mfi_cmd(sc);
if (!cmd) {
device_printf(sc->mrsas_dev, "Failed to get a free cmd for IOCTL\n");
return (ENOMEM);
}
/*
* User's IOCTL packet has 2 frames (maximum). Copy those two frames
* into our cmd's frames. cmd->frame's context will get overwritten
* when we copy from user's frames. So set that value alone
* separately
*/
memcpy(cmd->frame, user_ioc->frame.raw, 2 * MEGAMFI_FRAME_SIZE);
cmd->frame->hdr.context = cmd->index;
cmd->frame->hdr.pad_0 = 0;
cmd->frame->hdr.flags &= ~(MFI_FRAME_IEEE | MFI_FRAME_SGL64 |
MFI_FRAME_SENSE64);
/*
* The management interface between applications and the fw uses MFI
* frames. E.g, RAID configuration changes, LD property changes etc
* are accomplishes through different kinds of MFI frames. The driver
* needs to care only about substituting user buffers with kernel
* buffers in SGLs. The location of SGL is embedded in the struct
* iocpacket itself.
*/
kern_sge32 = (struct mrsas_sge32 *)
((unsigned long)cmd->frame + user_ioc->sgl_off);
/*
* For each user buffer, create a mirror buffer and copy in
*/
for (i = 0; i < user_ioc->sge_count; i++) {
if (ioctlCmd == MRSAS_IOC_FIRMWARE_PASS_THROUGH64) {
if (!user_ioc->sgl[i].iov_len)
continue;
ioctl_data_size = user_ioc->sgl[i].iov_len;
#ifdef COMPAT_FREEBSD32
} else {
if (!user_ioc32->sgl[i].iov_len)
continue;
ioctl_data_size = user_ioc32->sgl[i].iov_len;
#endif
}
if (bus_dma_tag_create(sc->mrsas_parent_tag,
1, 0,
BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR,
NULL, NULL,
ioctl_data_size,
1,
ioctl_data_size,
BUS_DMA_ALLOCNOW,
NULL, NULL,
&ioctl_data_tag[i])) {
device_printf(sc->mrsas_dev, "Cannot allocate ioctl data tag\n");
ret = ENOMEM;
goto out;
}
if (bus_dmamem_alloc(ioctl_data_tag[i], (void **)&ioctl_data_mem[i],
(BUS_DMA_NOWAIT | BUS_DMA_ZERO), &ioctl_data_dmamap[i])) {
device_printf(sc->mrsas_dev, "Cannot allocate ioctl data mem\n");
ret = ENOMEM;
goto out;
}
if (bus_dmamap_load(ioctl_data_tag[i], ioctl_data_dmamap[i],
ioctl_data_mem[i], ioctl_data_size, mrsas_alloc_cb,
&ioctl_data_phys_addr[i], BUS_DMA_NOWAIT)) {
device_printf(sc->mrsas_dev, "Cannot load ioctl data mem\n");
ret = ENOMEM;
goto out;
}
/* Save the physical address and length */
kern_sge32[i].phys_addr = (u_int32_t)ioctl_data_phys_addr[i];
if (ioctlCmd == MRSAS_IOC_FIRMWARE_PASS_THROUGH64) {
kern_sge32[i].length = user_ioc->sgl[i].iov_len;
iov_base_ptrin = user_ioc->sgl[i].iov_base;
iov_len = user_ioc->sgl[i].iov_len;
#ifdef COMPAT_FREEBSD32
} else {
kern_sge32[i].length = user_ioc32->sgl[i].iov_len;
iov_base_ptrin = PTRIN(user_ioc32->sgl[i].iov_base);
iov_len = user_ioc32->sgl[i].iov_len;
#endif
}
/* Copy in data from user space */
ret = copyin(iov_base_ptrin, ioctl_data_mem[i], iov_len);
if (ret) {
device_printf(sc->mrsas_dev, "IOCTL copyin failed!\n");
goto out;
}
}
ioctl_sense_size = user_ioc->sense_len;
if (user_ioc->sense_len) {
if (bus_dma_tag_create(sc->mrsas_parent_tag,
1, 0,
BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR,
NULL, NULL,
ioctl_sense_size,
1,
ioctl_sense_size,
BUS_DMA_ALLOCNOW,
NULL, NULL,
&ioctl_sense_tag)) {
device_printf(sc->mrsas_dev, "Cannot allocate ioctl sense tag\n");
ret = ENOMEM;
goto out;
}
if (bus_dmamem_alloc(ioctl_sense_tag, (void **)&ioctl_sense_mem,
(BUS_DMA_NOWAIT | BUS_DMA_ZERO), &ioctl_sense_dmamap)) {
device_printf(sc->mrsas_dev, "Cannot allocate ioctl sense mem\n");
ret = ENOMEM;
goto out;
}
if (bus_dmamap_load(ioctl_sense_tag, ioctl_sense_dmamap,
ioctl_sense_mem, ioctl_sense_size, mrsas_alloc_cb,
&ioctl_sense_phys_addr, BUS_DMA_NOWAIT)) {
device_printf(sc->mrsas_dev, "Cannot load ioctl sense mem\n");
ret = ENOMEM;
goto out;
}
sense_ptr =
(unsigned long *)((unsigned long)cmd->frame + user_ioc->sense_off);
*sense_ptr = ioctl_sense_phys_addr;
}
/*
* Set the sync_cmd flag so that the ISR knows not to complete this
* cmd to the SCSI mid-layer
*/
cmd->sync_cmd = 1;
mrsas_issue_blocked_cmd(sc, cmd);
cmd->sync_cmd = 0;
/*
* copy out the kernel buffers to user buffers
*/
for (i = 0; i < user_ioc->sge_count; i++) {
if (ioctlCmd == MRSAS_IOC_FIRMWARE_PASS_THROUGH64) {
iov_base_ptrin = user_ioc->sgl[i].iov_base;
iov_len = user_ioc->sgl[i].iov_len;
#ifdef COMPAT_FREEBSD32
} else {
iov_base_ptrin = PTRIN(user_ioc32->sgl[i].iov_base);
iov_len = user_ioc32->sgl[i].iov_len;
#endif
}
ret = copyout(ioctl_data_mem[i], iov_base_ptrin, iov_len);
if (ret) {
device_printf(sc->mrsas_dev, "IOCTL copyout failed!\n");
goto out;
}
}
/*
* copy out the sense
*/
if (user_ioc->sense_len) {
/*
* sense_buff points to the location that has the user sense
* buffer address
*/
sense_ptr = (unsigned long *)((unsigned long)user_ioc->frame.raw +
user_ioc->sense_off);
ret = copyout(ioctl_sense_mem, (unsigned long *)*sense_ptr,
user_ioc->sense_len);
if (ret) {
device_printf(sc->mrsas_dev, "IOCTL sense copyout failed!\n");
goto out;
}
}
/*
* Return command status to user space
*/
memcpy(&user_ioc->frame.hdr.cmd_status, &cmd->frame->hdr.cmd_status,
sizeof(u_int8_t));
out:
/*
* Release sense buffer
*/
if (user_ioc->sense_len) {
if (ioctl_sense_phys_addr)
bus_dmamap_unload(ioctl_sense_tag, ioctl_sense_dmamap);
if (ioctl_sense_mem != NULL)
bus_dmamem_free(ioctl_sense_tag, ioctl_sense_mem, ioctl_sense_dmamap);
if (ioctl_sense_tag != NULL)
bus_dma_tag_destroy(ioctl_sense_tag);
}
/*
* Release data buffers
*/
for (i = 0; i < user_ioc->sge_count; i++) {
if (ioctlCmd == MRSAS_IOC_FIRMWARE_PASS_THROUGH64) {
if (!user_ioc->sgl[i].iov_len)
continue;
#ifdef COMPAT_FREEBSD32
} else {
if (!user_ioc32->sgl[i].iov_len)
continue;
#endif
}
if (ioctl_data_phys_addr[i])
bus_dmamap_unload(ioctl_data_tag[i], ioctl_data_dmamap[i]);
if (ioctl_data_mem[i] != NULL)
bus_dmamem_free(ioctl_data_tag[i], ioctl_data_mem[i],
ioctl_data_dmamap[i]);
if (ioctl_data_tag[i] != NULL)
bus_dma_tag_destroy(ioctl_data_tag[i]);
}
/* Free command */
mrsas_release_mfi_cmd(cmd);
return (ret);
}
/*
* mrsas_alloc_mfi_cmds: Allocates the command packets
* input: Adapter instance soft state
*
* Each IOCTL or passthru command that is issued to the FW are wrapped in a
* local data structure called mrsas_mfi_cmd. The frame embedded in this
* mrsas_mfi is issued to FW. The array is used only to look up the
* mrsas_mfi_cmd given the context. The free commands are maintained in a
* linked list.
*/
int
mrsas_alloc_mfi_cmds(struct mrsas_softc *sc)
{
int i, j;
u_int32_t max_cmd;
struct mrsas_mfi_cmd *cmd;
max_cmd = MRSAS_MAX_MFI_CMDS;
/*
* sc->mfi_cmd_list is an array of struct mrsas_mfi_cmd pointers.
* Allocate the dynamic array first and then allocate individual
* commands.
*/
sc->mfi_cmd_list = malloc(sizeof(struct mrsas_mfi_cmd *) * max_cmd, M_MRSAS, M_NOWAIT);
if (!sc->mfi_cmd_list) {
device_printf(sc->mrsas_dev, "Cannot alloc memory for mfi_cmd cmd_list.\n");
return (ENOMEM);
}
memset(sc->mfi_cmd_list, 0, sizeof(struct mrsas_mfi_cmd *) * max_cmd);
for (i = 0; i < max_cmd; i++) {
sc->mfi_cmd_list[i] = malloc(sizeof(struct mrsas_mfi_cmd),
M_MRSAS, M_NOWAIT);
if (!sc->mfi_cmd_list[i]) {
for (j = 0; j < i; j++)
free(sc->mfi_cmd_list[j], M_MRSAS);
free(sc->mfi_cmd_list, M_MRSAS);
sc->mfi_cmd_list = NULL;
return (ENOMEM);
}
}
for (i = 0; i < max_cmd; i++) {
cmd = sc->mfi_cmd_list[i];
memset(cmd, 0, sizeof(struct mrsas_mfi_cmd));
cmd->index = i;
cmd->ccb_ptr = NULL;
cmd->sc = sc;
TAILQ_INSERT_TAIL(&(sc->mrsas_mfi_cmd_list_head), cmd, next);
}
/* create a frame pool and assign one frame to each command */
if (mrsas_create_frame_pool(sc)) {
device_printf(sc->mrsas_dev, "Cannot allocate DMA frame pool.\n");
/* Free the frames */
for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) {
cmd = sc->mfi_cmd_list[i];
mrsas_free_frame(sc, cmd);
}
if (sc->mficmd_frame_tag != NULL)
bus_dma_tag_destroy(sc->mficmd_frame_tag);
return (ENOMEM);
}
return (0);
}
/*
* mrsas_create_frame_pool: Creates DMA pool for cmd frames
* input: Adapter soft state
*
* Each command packet has an embedded DMA memory buffer that is used for
* filling MFI frame and the SG list that immediately follows the frame. This
* function creates those DMA memory buffers for each command packet by using
* PCI pool facility. pad_0 is initialized to 0 to prevent corrupting value
* of context and could cause FW crash.
*/
static int
mrsas_create_frame_pool(struct mrsas_softc *sc)
{
int i;
struct mrsas_mfi_cmd *cmd;
if (bus_dma_tag_create(sc->mrsas_parent_tag,
1, 0,
BUS_SPACE_MAXADDR_32BIT,
BUS_SPACE_MAXADDR,
NULL, NULL,
MRSAS_MFI_FRAME_SIZE,
1,
MRSAS_MFI_FRAME_SIZE,
BUS_DMA_ALLOCNOW,
NULL, NULL,
&sc->mficmd_frame_tag)) {
device_printf(sc->mrsas_dev, "Cannot create MFI frame tag\n");
return (ENOMEM);
}
for (i = 0; i < MRSAS_MAX_MFI_CMDS; i++) {
cmd = sc->mfi_cmd_list[i];
cmd->frame = mrsas_alloc_frame(sc, cmd);
if (cmd->frame == NULL) {
device_printf(sc->mrsas_dev, "Cannot alloc MFI frame memory\n");
return (ENOMEM);
}
memset(cmd->frame, 0, MRSAS_MFI_FRAME_SIZE);
cmd->frame->io.context = cmd->index;
cmd->frame->io.pad_0 = 0;
}
return (0);
}
/*
* mrsas_alloc_frame: Allocates MFI Frames
* input: Adapter soft state
*
* Create bus DMA memory tag and dmamap and load memory for MFI frames. Returns
* virtual memory pointer to allocated region.
*/
void *
mrsas_alloc_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
{
u_int32_t frame_size = MRSAS_MFI_FRAME_SIZE;
if (bus_dmamem_alloc(sc->mficmd_frame_tag, (void **)&cmd->frame_mem,
BUS_DMA_NOWAIT, &cmd->frame_dmamap)) {
device_printf(sc->mrsas_dev, "Cannot alloc MFI frame memory\n");
return (NULL);
}
if (bus_dmamap_load(sc->mficmd_frame_tag, cmd->frame_dmamap,
cmd->frame_mem, frame_size, mrsas_alloc_cb,
&cmd->frame_phys_addr, BUS_DMA_NOWAIT)) {
device_printf(sc->mrsas_dev, "Cannot load IO request memory\n");
return (NULL);
}
return (cmd->frame_mem);
}
/*
* mrsas_alloc_cb: Callback function of bus_dmamap_load()
* input: callback argument,
* machine dependent type that describes DMA segments,
* number of segments,
* error code.
*
* This function is for the driver to receive mapping information resultant of
* the bus_dmamap_load(). The information is actually not being used, but the
* address is saved anyway.
*/
static void
mrsas_alloc_cb(void *arg, bus_dma_segment_t *segs,
int nsegs, int error)
{
bus_addr_t *addr;
addr = arg;
*addr = segs[0].ds_addr;
}
/*
* mrsas_free_frames: Frees memory for MFI frames
* input: Adapter soft state
*
* Deallocates MFI frames memory. Called from mrsas_free_mem() during detach
* and error case during creation of frame pool.
*/
void
mrsas_free_frame(struct mrsas_softc *sc, struct mrsas_mfi_cmd *cmd)
{
if (cmd->frame_phys_addr)
bus_dmamap_unload(sc->mficmd_frame_tag, cmd->frame_dmamap);
if (cmd->frame_mem != NULL)
bus_dmamem_free(sc->mficmd_frame_tag, cmd->frame_mem, cmd->frame_dmamap);
}