d72a078647
- Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days
296 lines
6.8 KiB
C
296 lines
6.8 KiB
C
/*-
|
|
* Copyright (c) 2006 IronPort Systems Inc. <ambrisko@ironport.com>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/selinfo.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#ifdef LOCAL_MODULE
|
|
#include <ipmivars.h>
|
|
#else
|
|
#include <dev/ipmi/ipmivars.h>
|
|
#endif
|
|
|
|
static int ipmi_pci_probe(device_t dev);
|
|
static int ipmi_pci_attach(device_t dev);
|
|
|
|
static struct ipmi_ident
|
|
{
|
|
u_int16_t vendor;
|
|
u_int16_t device;
|
|
char *desc;
|
|
} ipmi_identifiers[] = {
|
|
{0x1028, 0x000d, "Dell PE2650 SMIC interface"},
|
|
{0, 0, 0}
|
|
};
|
|
|
|
const char *
|
|
ipmi_pci_match(uint16_t vendor, uint16_t device)
|
|
{
|
|
struct ipmi_ident *m;
|
|
|
|
for (m = ipmi_identifiers; m->vendor != 0; m++)
|
|
if (m->vendor == vendor && m->device == device)
|
|
return (m->desc);
|
|
return (NULL);
|
|
}
|
|
|
|
static int
|
|
ipmi_pci_probe(device_t dev)
|
|
{
|
|
const char *desc;
|
|
|
|
if (ipmi_attached)
|
|
return (ENXIO);
|
|
|
|
desc = ipmi_pci_match(pci_get_vendor(dev), pci_get_device(dev));
|
|
if (desc != NULL) {
|
|
device_set_desc(dev, desc);
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
ipmi_pci_attach(device_t dev)
|
|
{
|
|
struct ipmi_softc *sc = device_get_softc(dev);
|
|
struct ipmi_get_info info;
|
|
const char *mode;
|
|
int error, type;
|
|
|
|
/* Look for an IPMI entry in the SMBIOS table. */
|
|
if (!ipmi_smbios_identify(&info))
|
|
return (ENXIO);
|
|
|
|
sc->ipmi_dev = dev;
|
|
|
|
switch (info.iface_type) {
|
|
case KCS_MODE:
|
|
mode = "KCS";
|
|
break;
|
|
case SMIC_MODE:
|
|
mode = "SMIC";
|
|
break;
|
|
case BT_MODE:
|
|
device_printf(dev, "BT mode is unsupported\n");
|
|
return (ENXIO);
|
|
default:
|
|
device_printf(dev, "No IPMI interface found\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
device_printf(dev, "%s mode found at %s 0x%jx alignment 0x%x on %s\n",
|
|
mode, info.io_mode ? "io" : "mem",
|
|
(uintmax_t)info.address, info.offset,
|
|
device_get_name(device_get_parent(dev)));
|
|
if (info.io_mode)
|
|
type = SYS_RES_IOPORT;
|
|
else
|
|
type = SYS_RES_MEMORY;
|
|
|
|
sc->ipmi_io_rid = PCIR_BAR(0);
|
|
sc->ipmi_io_res[0] = bus_alloc_resource_any(dev, type,
|
|
&sc->ipmi_io_rid, RF_ACTIVE);
|
|
sc->ipmi_io_type = type;
|
|
sc->ipmi_io_spacing = info.offset;
|
|
|
|
if (sc->ipmi_io_res[0] == NULL) {
|
|
device_printf(dev, "couldn't configure pci io res\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
sc->ipmi_irq_rid = 0;
|
|
sc->ipmi_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->ipmi_irq_rid, RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
switch (info.iface_type) {
|
|
case KCS_MODE:
|
|
error = ipmi_kcs_attach(sc);
|
|
if (error)
|
|
goto bad;
|
|
break;
|
|
case SMIC_MODE:
|
|
error = ipmi_smic_attach(sc);
|
|
if (error)
|
|
goto bad;
|
|
break;
|
|
}
|
|
error = ipmi_attach(dev);
|
|
if (error)
|
|
goto bad;
|
|
|
|
return (0);
|
|
bad:
|
|
ipmi_release_resources(dev);
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t ipmi_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ipmi_pci_probe),
|
|
DEVMETHOD(device_attach, ipmi_pci_attach),
|
|
DEVMETHOD(device_detach, ipmi_detach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ipmi_pci_driver = {
|
|
"ipmi",
|
|
ipmi_methods,
|
|
sizeof(struct ipmi_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(ipmi_pci, pci, ipmi_pci_driver, ipmi_devclass, 0, 0);
|
|
|
|
/* Native IPMI on PCI driver. */
|
|
|
|
static int
|
|
ipmi2_pci_probe(device_t dev)
|
|
{
|
|
|
|
if (pci_get_class(dev) == PCIC_SERIALBUS &&
|
|
pci_get_subclass(dev) == 0x07) {
|
|
device_set_desc(dev, "IPMI System Interface");
|
|
return (BUS_PROBE_GENERIC);
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
ipmi2_pci_attach(device_t dev)
|
|
{
|
|
struct ipmi_softc *sc;
|
|
int error, iface, type;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->ipmi_dev = dev;
|
|
|
|
/* Interface is determined by progif. */
|
|
switch (pci_get_progif(dev)) {
|
|
case 0:
|
|
iface = SMIC_MODE;
|
|
break;
|
|
case 1:
|
|
iface = KCS_MODE;
|
|
break;
|
|
case 2:
|
|
iface = BT_MODE;
|
|
device_printf(dev, "BT interface unsupported\n");
|
|
return (ENXIO);
|
|
default:
|
|
device_printf(dev, "Unsupported interface: %d\n",
|
|
pci_get_progif(dev));
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Bottom bit of bar indicates resouce type. There should be
|
|
* constants in pcireg.h for fields in a BAR.
|
|
*/
|
|
sc->ipmi_io_rid = PCIR_BAR(0);
|
|
if (pci_read_config(dev, PCIR_BAR(0), 4) & 0x1)
|
|
type = SYS_RES_IOPORT;
|
|
else
|
|
type = SYS_RES_MEMORY;
|
|
sc->ipmi_io_type = type;
|
|
sc->ipmi_io_spacing = 1;
|
|
sc->ipmi_io_res[0] = bus_alloc_resource_any(dev, type,
|
|
&sc->ipmi_io_rid, RF_ACTIVE);
|
|
if (sc->ipmi_io_res[0] == NULL) {
|
|
device_printf(dev, "couldn't map ports/memory\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
sc->ipmi_irq_rid = 0;
|
|
sc->ipmi_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
|
|
&sc->ipmi_irq_rid, RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
switch (iface) {
|
|
case KCS_MODE:
|
|
device_printf(dev, "using KSC interface\n");
|
|
|
|
/*
|
|
* We have to examine the resource directly to determine the
|
|
* alignment.
|
|
*/
|
|
if (!ipmi_kcs_probe_align(sc)) {
|
|
device_printf(dev, "Unable to determine alignment\n");
|
|
error = ENXIO;
|
|
goto bad;
|
|
}
|
|
|
|
error = ipmi_kcs_attach(sc);
|
|
if (error)
|
|
goto bad;
|
|
break;
|
|
case SMIC_MODE:
|
|
device_printf(dev, "using SMIC interface\n");
|
|
|
|
error = ipmi_smic_attach(sc);
|
|
if (error)
|
|
goto bad;
|
|
break;
|
|
}
|
|
error = ipmi_attach(dev);
|
|
if (error)
|
|
goto bad;
|
|
|
|
return (0);
|
|
bad:
|
|
ipmi_release_resources(dev);
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t ipmi2_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ipmi2_pci_probe),
|
|
DEVMETHOD(device_attach, ipmi2_pci_attach),
|
|
DEVMETHOD(device_detach, ipmi_detach),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ipmi2_pci_driver = {
|
|
"ipmi",
|
|
ipmi2_methods,
|
|
sizeof(struct ipmi_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(ipmi2_pci, pci, ipmi2_pci_driver, ipmi_devclass, 0, 0);
|