freebsd-dev/sys/i386/include/apicvar.h
John Baldwin dfa7bc486b - Add a function to set the Task Priority Register (TPR) of the local APIC.
Currently this is only used to initiailize the TPR to 0 during initial
  setup.
- Reallocate vectors for the local APIC timer, error, and thermal LVT
  entries.  The timer entry is allocated from the top of the I/O interrupt
  range reducing the number of vectors available for hardware interrupts
  to 191.  Linux happens to use the same exact vector for its timer
  interrupt as well.  If the timer vector shared the same priority queue
  as the IPI handlers, then the frequency that the timer vector will
  eventually be firing at can interact badly with the IPIs resulting in
  the queue filling and the dreaded IPI stuck panics, hence it being located
  at the top of the previous priority queue instead.
- Fixup various minor nits in comments.
2004-12-23 19:47:59 +00:00

217 lines
8.3 KiB
C

/*-
* Copyright (c) 2003 John Baldwin <jhb@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_APICVAR_H_
#define _MACHINE_APICVAR_H_
/*
* Local && I/O APIC variable definitions.
*/
/*
* Layout of local APIC interrupt vectors:
*
* 0xff (255) +-------------+
* | | 15 (Spurious / IPIs / Local Interrupts)
* 0xf0 (240) +-------------+
* | | 14 (I/O Interrupts / Timer)
* 0xe0 (224) +-------------+
* | | 13 (I/O Interrupts)
* 0xd0 (208) +-------------+
* | | 12 (I/O Interrupts)
* 0xc0 (192) +-------------+
* | | 11 (I/O Interrupts)
* 0xb0 (176) +-------------+
* | | 10 (I/O Interrupts)
* 0xa0 (160) +-------------+
* | | 9 (I/O Interrupts)
* 0x90 (144) +-------------+
* | | 8 (I/O Interrupts / System Calls)
* 0x80 (128) +-------------+
* | | 7 (I/O Interrupts)
* 0x70 (112) +-------------+
* | | 6 (I/O Interrupts)
* 0x60 (96) +-------------+
* | | 5 (I/O Interrupts)
* 0x50 (80) +-------------+
* | | 4 (I/O Interrupts)
* 0x40 (64) +-------------+
* | | 3 (I/O Interrupts)
* 0x30 (48) +-------------+
* | | 2 (ATPIC Interrupts)
* 0x20 (32) +-------------+
* | | 1 (Exceptions, traps, faults, etc.)
* 0x10 (16) +-------------+
* | | 0 (Exceptions, traps, faults, etc.)
* 0x00 (0) +-------------+
*
* Note: 0x80 needs to be handled specially and not allocated to an
* I/O device!
*/
#define APIC_ID_ALL 0xff
/* I/O Interrupts are used for external devices such as ISA, PCI, etc. */
#define APIC_IO_INTS (IDT_IO_INTS + 16)
#define APIC_NUM_IOINTS 191
/* The timer interrupt is used for clock handling and drives hardclock, etc. */
#define APIC_TIMER_INT (APIC_IO_INTS + APIC_NUM_IOINTS)
/*
********************* !!! WARNING !!! ******************************
* Each local apic has an interrupt receive fifo that is two entries deep
* for each interrupt priority class (higher 4 bits of interrupt vector).
* Once the fifo is full the APIC can no longer receive interrupts for this
* class and sending IPIs from other CPUs will be blocked.
* To avoid deadlocks there should be no more than two IPI interrupts
* pending at the same time.
* Currently this is guaranteed by dividing the IPIs in two groups that have
* each at most one IPI interrupt pending. The first group is protected by the
* smp_ipi_mtx and waits for the completion of the IPI (Only one IPI user
* at a time) The second group uses a single interrupt and a bitmap to avoid
* redundant IPI interrupts.
*
* Right now IPI_STOP used by kdb shares the interrupt priority class with
* the two IPI groups mentioned above. As such IPI_STOP may cause a deadlock.
* Eventually IPI_STOP should use NMI IPIs - this would eliminate this and
* other deadlocks caused by IPI_STOP.
*/
/* Interrupts for local APIC LVT entries other than the timer. */
#define APIC_LOCAL_INTS 240
#define APIC_ERROR_INT APIC_LOCAL_INTS
#define APIC_THERMAL_INT (APIC_LOCAL_INTS + 1)
#define APIC_IPI_INTS (APIC_LOCAL_INTS + 2)
#define IPI_RENDEZVOUS (APIC_IPI_INTS) /* Inter-CPU rendezvous. */
#define IPI_INVLTLB (APIC_IPI_INTS + 1) /* TLB Shootdown IPIs */
#define IPI_INVLPG (APIC_IPI_INTS + 2)
#define IPI_INVLRNG (APIC_IPI_INTS + 3)
#define IPI_LAZYPMAP (APIC_IPI_INTS + 4) /* Lazy pmap release. */
/* Vector to handle bitmap based IPIs */
#define IPI_BITMAP_VECTOR (APIC_IPI_INTS + 5)
/* IPIs handled by IPI_BITMAPED_VECTOR (XXX ups is there a better place?) */
#define IPI_AST 0 /* Generate software trap. */
#define IPI_HARDCLOCK 1 /* Inter-CPU clock handling. */
#define IPI_STATCLOCK 2
#define IPI_BITMAP_LAST IPI_STATCLOCK
#define IPI_IS_BITMAPED(x) ((x) <= IPI_BITMAP_LAST)
#define IPI_STOP (APIC_IPI_INTS + 6) /* Stop CPU until restarted. */
/*
* The spurious interrupt can share the priority class with the IPIs since
* it is not a normal interrupt. (Does not use the APIC's interrupt fifo)
*/
#define APIC_SPURIOUS_INT 255
#define LVT_LINT0 0
#define LVT_LINT1 1
#define LVT_TIMER 2
#define LVT_ERROR 3
#define LVT_PMC 4
#define LVT_THERMAL 5
#define LVT_MAX LVT_THERMAL
#ifndef LOCORE
#define APIC_IPI_DEST_SELF -1
#define APIC_IPI_DEST_ALL -2
#define APIC_IPI_DEST_OTHERS -3
#define APIC_BUS_UNKNOWN -1
#define APIC_BUS_ISA 0
#define APIC_BUS_EISA 1
#define APIC_BUS_PCI 2
#define APIC_BUS_MAX APIC_BUS_PCI
/*
* An APIC enumerator is a psuedo bus driver that enumerates APIC's including
* CPU's and I/O APIC's.
*/
struct apic_enumerator {
const char *apic_name;
int (*apic_probe)(void);
int (*apic_probe_cpus)(void);
int (*apic_setup_local)(void);
int (*apic_setup_io)(void);
SLIST_ENTRY(apic_enumerator) apic_next;
};
inthand_t
IDTVEC(apic_isr1), IDTVEC(apic_isr2), IDTVEC(apic_isr3),
IDTVEC(apic_isr4), IDTVEC(apic_isr5), IDTVEC(apic_isr6),
IDTVEC(apic_isr7), IDTVEC(spuriousint);
u_int apic_irq_to_idt(u_int irq);
u_int apic_idt_to_irq(u_int vector);
void apic_register_enumerator(struct apic_enumerator *enumerator);
void *ioapic_create(uintptr_t addr, int32_t id, int intbase);
int ioapic_disable_pin(void *cookie, u_int pin);
void ioapic_enable_mixed_mode(void);
int ioapic_get_vector(void *cookie, u_int pin);
int ioapic_next_logical_cluster(void);
void ioapic_register(void *cookie);
int ioapic_remap_vector(void *cookie, u_int pin, int vector);
int ioapic_set_bus(void *cookie, u_int pin, int bus_type);
int ioapic_set_extint(void *cookie, u_int pin);
int ioapic_set_nmi(void *cookie, u_int pin);
int ioapic_set_polarity(void *cookie, u_int pin, enum intr_polarity pol);
int ioapic_set_triggermode(void *cookie, u_int pin,
enum intr_trigger trigger);
int ioapic_set_smi(void *cookie, u_int pin);
void lapic_create(u_int apic_id, int boot_cpu);
void lapic_disable(void);
void lapic_dump(const char *str);
void lapic_enable_intr(u_int vector);
void lapic_eoi(void);
int lapic_id(void);
void lapic_init(uintptr_t addr);
int lapic_intr_pending(u_int vector);
void lapic_ipi_raw(register_t icrlo, u_int dest);
void lapic_ipi_vectored(u_int vector, int dest);
int lapic_ipi_wait(int delay);
void lapic_handle_intr(struct intrframe frame);
void lapic_set_logical_id(u_int apic_id, u_int cluster, u_int cluster_id);
int lapic_set_lvt_mask(u_int apic_id, u_int lvt, u_char masked);
int lapic_set_lvt_mode(u_int apic_id, u_int lvt, u_int32_t mode);
int lapic_set_lvt_polarity(u_int apic_id, u_int lvt,
enum intr_polarity pol);
int lapic_set_lvt_triggermode(u_int apic_id, u_int lvt,
enum intr_trigger trigger);
void lapic_set_tpr(u_int vector);
void lapic_setup(void);
#endif /* !LOCORE */
#endif /* _MACHINE_APICVAR_H_ */